# Makefile for QEMU.
ifneq ($(wildcard config-host.mak),)
+# Put the all: rule here so that config-host.mak can contain dependencies.
+all: build-all
include config-host.mak
include $(SRC_PATH)/rules.mak
else
LIBS+=-lwinmm -lws2_32 -liphlpapi
endif
-all: $(TOOLS) $(DOCS) recurse-all
+build-all: $(TOOLS) $(DOCS) recurse-all
config-host.mak: configure
ifneq ($(wildcard config-host.mak),)
@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
endif
+SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
subdir-%:
- $(call quiet-command,$(MAKE) -C $* V="$(V)" TARGET_DIR="$*/" all,)
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
#######################################################################
# BLOCK_OBJS is code used by both qemu system emulation and qemu-img
-BLOCK_OBJS=cutils.o qemu-malloc.o
-BLOCK_OBJS+=block-cow.o block-qcow.o aes.o block-vmdk.o block-cloop.o
-BLOCK_OBJS+=block-dmg.o block-bochs.o block-vpc.o block-vvfat.o
-BLOCK_OBJS+=block-qcow2.o block-parallels.o block-nbd.o
+BLOCK_OBJS=cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
+BLOCK_OBJS+=block/cow.o block/qcow.o aes.o block/vmdk.o block/cloop.o
+BLOCK_OBJS+=block/dmg.o block/bochs.o block/vpc.o block/vvfat.o
+BLOCK_OBJS+=block/qcow2.o block/parallels.o block/nbd.o
BLOCK_OBJS+=nbd.o block.o aio.o
ifdef CONFIG_WIN32
-BLOCK_OBJS += block-raw-win32.o
+BLOCK_OBJS += block/raw-win32.o
else
ifdef CONFIG_AIO
BLOCK_OBJS += posix-aio-compat.o
endif
-BLOCK_OBJS += block-raw-posix.o
+BLOCK_OBJS += block/raw-posix.o
+endif
+
+ifdef CONFIG_CURL
+BLOCK_OBJS += block/curl.o
endif
######################################################################
OBJS+=buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
OBJS+=qemu-char.o aio.o net-checksum.o savevm.o cache-utils.o
OBJS+=msmouse.o ps2.o
+OBJS+=qdev.o ssi.o
ifdef CONFIG_BRLAPI
OBJS+= baum.o
LIBS+=$(VDE_LIBS)
+# xen backend driver support
+XEN_OBJS := xen_backend.o xen_devconfig.o
+XEN_OBJS += xen_console.o xenfb.o xen_disk.o xen_nic.o
+ifdef CONFIG_XEN
+ OBJS += $(XEN_OBJS)
+endif
+
+LIBS+=$(CURL_LIBS)
+
cocoa.o: cocoa.m
keymaps.o: keymaps.c keymaps.h
######################################################################
-qemu-img$(EXESUF): qemu-img.o qemu-tool.o osdep.o $(BLOCK_OBJS)
+qemu-img.o: qemu-img-cmds.h
+
+qemu-img$(EXESUF): qemu-img.o qemu-tool.o tool-osdep.o $(BLOCK_OBJS)
-qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o osdep.o $(BLOCK_OBJS)
+qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o tool-osdep.o $(BLOCK_OBJS)
-qemu-io$(EXESUF): qemu-io.o qemu-tool.o osdep.o cmd.o $(BLOCK_OBJS)
+qemu-io$(EXESUF): qemu-io.o qemu-tool.o tool-osdep.o cmd.o $(BLOCK_OBJS)
qemu-img$(EXESUF) qemu-nbd$(EXESUF) qemu-io$(EXESUF): LIBS += -lz
+qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
+ $(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@")
+
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
- rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d
+ rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
+ rm -f qemu-img-cmds.h
$(MAKE) -C tests clean
- for d in $(TARGET_DIRS); do \
+ for d in $(TARGET_DIRS) libhw32 libhw64; do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
distclean: clean
- rm -f config-host.mak config-host.h $(DOCS) qemu-options.texi
+ rm -f config-host.mak config-host.h $(DOCS) qemu-options.texi qemu-img-cmds.texi
rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
- for d in $(TARGET_DIRS); do \
+ for d in $(TARGET_DIRS) libhw32 libhw64; do \
rm -rf $$d || exit 1 ; \
done
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
video.x openbios-sparc32 openbios-sparc64 openbios-ppc \
pxe-ne2k_pci.bin pxe-rtl8139.bin pxe-pcnet.bin pxe-e1000.bin \
-bamboo.dtb
+bamboo.dtb petalogix-s3adsp1800.dtb
else
BLOBS=
endif
ifndef CONFIG_WIN32
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
set -e; for x in $(KEYMAPS); do \
- $(INSTALL_DATA) $(SRC_PATH)/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
+ $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
done
endif
for d in $(TARGET_DIRS); do \
qemu-options.texi: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
-qemu.1: qemu-doc.texi qemu-options.texi
+qemu-monitor.texi: $(SRC_PATH)/qemu-monitor.hx
+ $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
+
+qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
+ $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
+
+qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \
pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
" GEN $@")
-qemu-img.1: qemu-img.texi
+qemu-img.1: qemu-img.texi qemu-img-cmds.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \
pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
html: qemu-doc.html qemu-tech.html
-qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi
+qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-monitor.texi qemu-img-cmds.texi
VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)
$(mandir)/man8/qemu-nbd.8
# Include automatically generated dependency files
--include $(wildcard *.d audio/*.d slirp/*.d)
+-include $(wildcard *.d audio/*.d slirp/*.d block/*.d)
projects / qemu.git / blobdiff