the recommended is 320x240, 640x480, 800x640.
A timeout could be passed to bios, guest will pause for @var{rb_timeout} ms
-when boot failed, then reboot. If @var{rb_timeout} is '-1', guest will not
-reboot, qemu passes '-1' to bios by default. Currently Seabios for X86
+when boot failed, then reboot. If @option{reboot-timeout} is not set,
+guest will not reboot by default. Currently Seabios for X86
system support it.
Do strict boot via @option{strict=on} as far as firmware/BIOS
" specifies the audio backend to use\n"
" id= identifier of the backend\n"
" timer-period= timer period in microseconds\n"
+ " in|out.mixing-engine= use mixing engine to mix streams inside QEMU\n"
" in|out.fixed-settings= use fixed settings for host audio\n"
" in|out.frequency= frequency to use with fixed settings\n"
" in|out.channels= number of channels to use with fixed settings\n"
" in|out.format= sample format to use with fixed settings\n"
" valid values: s8, s16, s32, u8, u16, u32\n"
" in|out.voices= number of voices to use\n"
- " in|out.buffer-len= length of buffer in microseconds\n"
+ " in|out.buffer-length= length of buffer in microseconds\n"
"-audiodev none,id=id,[,prop[=value][,...]]\n"
" dummy driver that discards all output\n"
#ifdef CONFIG_AUDIO_ALSA
"-audiodev alsa,id=id[,prop[=value][,...]]\n"
" in|out.dev= name of the audio device to use\n"
- " in|out.period-len= length of period in microseconds\n"
+ " in|out.period-length= length of period in microseconds\n"
" in|out.try-poll= attempt to use poll mode\n"
" threshold= threshold (in microseconds) when playback starts\n"
#endif
-audiodev alsa,id=example,out.channels=1 # leaves in.channels unspecified
@end example
+NOTE: parameter validation is known to be incomplete, in many cases
+specifying an invalid option causes QEMU to print an error message and
+continue emulation without sound.
+
Valid global options are:
@table @option
Sets the timer @var{period} used by the audio subsystem in microseconds.
Default is 10000 (10 ms).
+@item in|out.mixing-engine=on|off
+Use QEMU's mixing engine to mix all streams inside QEMU and convert
+audio formats when not supported by the backend. When off,
+@var{fixed-settings} must be off too. Note that disabling this option
+means that the selected backend must support multiple streams and the
+audio formats used by the virtual cards, otherwise you'll get no sound.
+It's not recommended to disable this option unless you want to use 5.1
+or 7.1 audio, as mixing engine only supports mono and stereo audio.
+Default is on.
+
@item in|out.fixed-settings=on|off
Use fixed settings for host audio. When off, it will change based on
how the guest opens the sound card. In this case you must not specify
@item in|out.voices=@var{voices}
Specify the number of @var{voices} to use. Default is 1.
-@item in|out.buffer=@var{usecs}
+@item in|out.buffer-length=@var{usecs}
Sets the size of the buffer in microseconds.
@end table
Specify the ALSA @var{device} to use for input and/or output. Default
is @code{default}.
-@item in|out.period-len=@var{usecs}
+@item in|out.period-length=@var{usecs}
Sets the period length in microseconds.
@item in|out.try-poll=on|off
DEF("blockdev", HAS_ARG, QEMU_OPTION_blockdev,
"-blockdev [driver=]driver[,node-name=N][,discard=ignore|unmap]\n"
" [,cache.direct=on|off][,cache.no-flush=on|off]\n"
- " [,read-only=on|off][,detect-zeroes=on|off|unmap]\n"
+ " [,read-only=on|off][,auto-read-only=on|off]\n"
+ " [,force-share=on|off][,detect-zeroes=on|off|unmap]\n"
" [,driver specific parameters...]\n"
" configure a block backend\n", QEMU_ARCH_ALL)
STEXI
For the top level, an explicit node name must be specified.
@item read-only
Open the node read-only. Guest write attempts will fail.
+
+Note that some block drivers support only read-only access, either generally or
+in certain configurations. In this case, the default value
+@option{read-only=off} does not work and the option must be specified
+explicitly.
+@item auto-read-only
+If @option{auto-read-only=on} is set, QEMU may fall back to read-only usage
+even when @option{read-only=off} is requested, or even switch between modes as
+needed, e.g. depending on whether the image file is writable or whether a
+writing user is attached to the node.
+@item force-share
+Override the image locking system of QEMU by forcing the node to utilize
+weaker shared access for permissions where it would normally request exclusive
+access. When there is the potential for multiple instances to have the same
+file open (whether this invocation of QEMU is the first or the second
+instance), both instances must permit shared access for the second instance to
+succeed at opening the file.
+
+Enabling @option{force-share=on} requires @option{read-only=on}.
@item cache.direct
The host page cache can be avoided with @option{cache.direct=on}. This will
attempt to do disk IO directly to the guest's memory. QEMU may still perform an
DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs,
"-virtfs local,path=path,mount_tag=tag,security_model=mapped-xattr|mapped-file|passthrough|none\n"
- " [,id=id][,writeout=immediate][,readonly][,fmode=fmode][,dmode=dmode]\n"
+ " [,id=id][,writeout=immediate][,readonly][,fmode=fmode][,dmode=dmode][,multidevs=remap|forbid|warn]\n"
"-virtfs proxy,mount_tag=tag,socket=socket[,id=id][,writeout=immediate][,readonly]\n"
"-virtfs proxy,mount_tag=tag,sock_fd=sock_fd[,id=id][,writeout=immediate][,readonly]\n"
"-virtfs synth,mount_tag=tag[,id=id][,readonly]\n",
STEXI
-@item -virtfs local,path=@var{path},mount_tag=@var{mount_tag} ,security_model=@var{security_model}[,writeout=@var{writeout}][,readonly] [,fmode=@var{fmode}][,dmode=@var{dmode}]
+@item -virtfs local,path=@var{path},mount_tag=@var{mount_tag} ,security_model=@var{security_model}[,writeout=@var{writeout}][,readonly] [,fmode=@var{fmode}][,dmode=@var{dmode}][,multidevs=@var{multidevs}]
@itemx -virtfs proxy,socket=@var{socket},mount_tag=@var{mount_tag} [,writeout=@var{writeout}][,readonly]
@itemx -virtfs proxy,sock_fd=@var{sock_fd},mount_tag=@var{mount_tag} [,writeout=@var{writeout}][,readonly]
@itemx -virtfs synth,mount_tag=@var{mount_tag}
only with security models "mapped-xattr" and "mapped-file".
@item mount_tag=@var{mount_tag}
Specifies the tag name to be used by the guest to mount this export point.
+@item multidevs=@var{multidevs}
+Specifies how to deal with multiple devices being shared with a 9p export.
+Supported behaviours are either "remap", "forbid" or "warn". The latter is
+the default behaviour on which virtfs 9p expects only one device to be
+shared with the same export, and if more than one device is shared and
+accessed via the same 9p export then only a warning message is logged
+(once) by qemu on host side. In order to avoid file ID collisions on guest
+you should either create a separate virtfs export for each device to be
+shared with guests (recommended way) or you might use "remap" instead which
+allows you to share multiple devices with only one export instead, which is
+achieved by remapping the original inode numbers from host to guest in a
+way that would prevent such collisions. Remapping inodes in such use cases
+is required because the original device IDs from host are never passed and
+exposed on guest. Instead all files of an export shared with virtfs always
+share the same device id on guest. So two files with identical inode
+numbers but from actually different devices on host would otherwise cause a
+file ID collision and hence potential misbehaviours on guest. "forbid" on
+the other hand assumes like "warn" that only one device is shared by the
+same export, however it will not only log a warning message but also
+deny access to additional devices on guest. Note though that "forbid" does
+currently not block all possible file access operations (e.g. readdir()
+would still return entries from other devices).
@end table
ETEXI
projects / qemu.git / blobdiff