make="make"
install="install"
strip="strip"
+objcopy="objcopy"
+ld="ld"
# parse CC options first
for opt do
cc="${cross_prefix}${cc}"
ar="${cross_prefix}${ar}"
strip="${cross_prefix}${strip}"
+objcopy="${cross_prefix}${objcopy}"
+ld="${cross_prefix}${ld}"
# check that the C compiler works.
cat > $TMPC <<EOF
m68k)
cpu="m68k"
;;
+ microblaze)
+ cpu="microblaze"
+ ;;
mips)
cpu="mips"
;;
esac
gprof="no"
debug_tcg="no"
+debug="no"
sparse="no"
strip_opt="yes"
bigendian="no"
mingw32="no"
EXESUF=""
-gdbstub="yes"
slirp="yes"
vde="yes"
fmod_lib=""
kqemu="no"
profiler="no"
cocoa="no"
-check_gfx="yes"
softmmu="yes"
linux_user="no"
darwin_user="no"
bsd_user="no"
-build_docs="no"
+guest_base=""
+build_docs="yes"
uname_release=""
curses="yes"
+curl="yes"
+pthread="yes"
aio="yes"
+io_thread="no"
nptl="yes"
mixemu="no"
bluez="yes"
-kvm="yes"
+kvm="no"
kerneldir=""
aix="no"
blobs="yes"
fdt="yes"
+sdl="yes"
sdl_x11="no"
xen="yes"
pkgversion=""
make="gmake"
install="ginstall"
needs_libsunmath="no"
- kvm="no"
solarisrev=`uname -r | cut -f2 -d.`
# have to select again, because `uname -m` returns i86pc
# even on an x86_64 box.
linux="yes"
linux_user="yes"
usb="linux"
+kvm="yes"
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
kqemu="yes"
audio_possible_drivers="$audio_possible_drivers fmod"
fi
[ -f "$workdir/vl.c" ] || source_path_used="yes"
-werror="no"
-# generate compile errors on warnings for development builds
-#if grep cvs $source_path/VERSION > /dev/null 2>&1 ; then
-#werror="yes";
-#fi
+werror=""
for opt do
optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
;;
--install=*) install="$optarg"
;;
- --extra-cflags=*) CFLAGS="$optarg"
+ --extra-cflags=*) EXTRA_CFLAGS="$optarg"
;;
- --extra-ldflags=*) LDFLAGS="$optarg"
+ --extra-ldflags=*) EXTRA_LDFLAGS="$optarg"
;;
--cpu=*) cpu="$optarg"
;;
;;
--disable-debug-tcg) debug_tcg="no"
;;
+ --enable-debug)
+ # Enable debugging options that aren't excessively noisy
+ debug_tcg="yes"
+ debug="yes"
+ strip_opt="no"
+ ;;
--enable-sparse) sparse="yes"
;;
--disable-sparse) sparse="no"
sdl="no" ;
audio_drv_list="coreaudio `echo $audio_drv_list | sed s,coreaudio,,g`"
;;
- --disable-gfx-check) check_gfx="no"
- ;;
--disable-system) softmmu="no"
;;
--enable-system) softmmu="yes"
;;
--enable-bsd-user) bsd_user="yes"
;;
+ --enable-guest-base) guest_base="yes"
+ ;;
+ --disable-guest-base) guest_base="no"
+ ;;
--enable-uname-release=*) uname_release="$optarg"
;;
--sparc_cpu=*)
sparc_cpu="$optarg"
case $sparc_cpu in
- v7|v8) SP_CFLAGS="-m32 -mcpu=${sparc_cpu} -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m32"
- target_cpu="sparc"; cpu="sparc" ;;
- v8plus|v8plusa) SP_CFLAGS="-m32 -mcpu=ultrasparc -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m32"
- target_cpu="sparc"; cpu="sparc" ;;
- v9) SP_CFLAGS="-m64 -mcpu=ultrasparc -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m64"
- target_cpu="sparc64"; cpu="sparc64" ;;
- *) echo "undefined SPARC architecture. Exiting";exit 1;;
+ v7|v8)
+ ARCH_CFLAGS="-m32 -mcpu=${sparc_cpu} -D__sparc_${sparc_cpu}__"
+ ARCH_LDFLAGS="-m32"
+ target_arch2="sparc"
+ cpu="sparc"
+ ;;
+ v8plus|v8plusa)
+ ARCH_CFLAGS="-m32 -mcpu=ultrasparc -D__sparc_${sparc_cpu}__"
+ ARCH_LDFLAGS="-m32"
+ target_arch2="sparc"
+ cpu="sparc"
+ ;;
+ v9)
+ ARCH_CFLAGS="-m64 -mcpu=ultrasparc -D__sparc_${sparc_cpu}__"
+ ARCH_LDFLAGS="-m64"
+ target_arch2="sparc64"
+ cpu="sparc64"
+ ;;
+ *)
+ echo "undefined SPARC architecture. Exiting";
+ exit 1
+ ;;
esac
;;
--enable-werror) werror="yes"
;;
--disable-curses) curses="no"
;;
+ --disable-curl) curl="no"
+ ;;
--disable-nptl) nptl="no"
;;
--enable-mixemu) mixemu="yes"
;;
+ --disable-pthread) pthread="no"
+ ;;
--disable-aio) aio="no"
;;
+ --enable-io-thread) io_thread="yes"
+ ;;
--disable-blobs) blobs="no"
;;
--kerneldir=*) kerneldir="$optarg"
;;
--with-pkgversion=*) pkgversion=" ($optarg)"
;;
+ --disable-docs) build_docs="no"
+ ;;
*) echo "ERROR: unknown option $opt"; show_help="yes"
;;
esac
done
# default flags for all hosts
-CFLAGS="$CFLAGS -O2 -g -fno-strict-aliasing"
+CFLAGS="$CFLAGS -g -fno-strict-aliasing"
+if test "$debug" = "no" ; then
+ CFLAGS="$CFLAGS -O2"
+fi
CFLAGS="$CFLAGS -Wall -Wundef -Wendif-labels -Wwrite-strings -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls"
LDFLAGS="$LDFLAGS -g"
+
+# Consult white-list to determine whether to enable werror
+# by default. Only enable by default for git builds
+if test -z "$werror" ; then
+ z_version=`cut -f3 -d. $source_path/VERSION`
+ if test "$z_version" = "50" -a \
+ "$linux" = "yes" ; then
+ werror="yes"
+ else
+ werror="no"
+ fi
+fi
+
if test "$werror" = "yes" ; then
-CFLAGS="$CFLAGS -Werror"
+ CFLAGS="$CFLAGS -Werror"
fi
if test "$solaris" = "no" ; then
# If cpu ~= sparc and sparc_cpu hasn't been defined, plug in the right
# ARCH_CFLAGS/ARCH_LDFLAGS (assume sparc_v8plus for 32-bit and sparc_v9 for 64-bit)
#
+host_guest_base="no"
case "$cpu" in
sparc) if test -z "$sparc_cpu" ; then
ARCH_CFLAGS="-m32 -mcpu=ultrasparc -D__sparc_v8plus__"
ARCH_LDFLAGS="-m32"
- else
- ARCH_CFLAGS="${SP_CFLAGS}"
- ARCH_LDFLAGS="${SP_LDFLAGS}"
fi
ARCH_CFLAGS="$ARCH_CFLAGS -ffixed-g2 -ffixed-g3"
if test "$solaris" = "no" ; then
sparc64) if test -z "$sparc_cpu" ; then
ARCH_CFLAGS="-m64 -mcpu=ultrasparc -D__sparc_v9__"
ARCH_LDFLAGS="-m64"
- else
- ARCH_CFLAGS="${SP_CFLAGS}"
- ARCH_LDFLAGS="${SP_LDFLAGS}"
fi
if test "$solaris" = "no" ; then
ARCH_CFLAGS="$ARCH_CFLAGS -ffixed-g5 -ffixed-g6 -ffixed-g7"
i386)
ARCH_CFLAGS="-m32"
ARCH_LDFLAGS="-m32"
+ host_guest_base="yes"
;;
x86_64)
ARCH_CFLAGS="-m64"
ARCH_LDFLAGS="-m64"
+ host_guest_base="yes"
+ ;;
+ arm*)
+ host_guest_base="yes"
+ ;;
+ ppc*)
+ host_guest_base="yes"
;;
esac
+[ -z "$guest_base" ] && guest_base="$host_guest_base"
+
if test x"$show_help" = x"yes" ; then
cat << EOF
echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]"
echo " --cc=CC use C compiler CC [$cc]"
echo " --host-cc=CC use C compiler CC [$host_cc] for dyngen etc."
-echo " --extra-cflags=CFLAGS add C compiler flags CFLAGS"
-echo " --extra-ldflags=LDFLAGS add linker flags LDFLAGS"
+echo " --extra-cflags=CFLAGS append extra C compiler flags CFLAGS"
+echo " --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS"
echo " --make=MAKE use specified make [$make]"
echo " --install=INSTALL use specified install [$install]"
echo " --static enable static build [$static]"
echo " --enable-debug-tcg enable TCG debugging"
echo " --disable-debug-tcg disable TCG debugging (default)"
+echo " --enable-debug enable common debug build options"
echo " --enable-sparse enable sparse checker"
echo " --disable-sparse disable sparse checker (default)"
echo " --disable-strip disable stripping binaries"
echo " --disable-vnc-tls disable TLS encryption for VNC server"
echo " --disable-vnc-sasl disable SASL encryption for VNC server"
echo " --disable-curses disable curses output"
+echo " --disable-curl disable curl connectivity"
echo " --disable-bluez disable bluez stack connectivity"
echo " --disable-kvm disable KVM acceleration support"
echo " --disable-nptl disable usermode NPTL support"
echo " --disable-darwin-user disable all darwin usermode emulation targets"
echo " --enable-bsd-user enable all BSD usermode emulation targets"
echo " --disable-bsd-user disable all BSD usermode emulation targets"
+echo " --enable-guest-base enable GUEST_BASE support for usermode"
+echo " emulation targets"
+echo " --disable-guest-base disable GUEST_BASE support"
echo " --fmod-lib path to FMOD library"
echo " --fmod-inc path to FMOD includes"
echo " --oss-lib path to OSS library"
echo " --enable-uname-release=R Return R for uname -r in usermode emulation"
echo " --sparc_cpu=V Build qemu for Sparc architecture v7, v8, v8plus, v8plusa, v9"
echo " --disable-vde disable support for vde network"
+echo " --disable-pthread disable pthread support"
echo " --disable-aio disable AIO support"
+echo " --enable-io-thread enable IO thread"
echo " --disable-blobs disable installing provided firmware blobs"
echo " --kerneldir=PATH look for kernel includes in PATH"
echo ""
arm-softmmu \
cris-softmmu \
m68k-softmmu \
+microblaze-softmmu \
mips-softmmu \
mipsel-softmmu \
mips64-softmmu \
sh4-softmmu \
sh4eb-softmmu \
sparc-softmmu \
+sparc64-softmmu \
"
fi
# the following are Linux specific
armeb-linux-user \
cris-linux-user \
m68k-linux-user \
+microblaze-linux-user \
mips-linux-user \
mipsel-linux-user \
ppc-linux-user \
cat > $TMPC <<EOF
#include <xenctrl.h>
#include <xs.h>
-int main(void) { xs_daemon_open; xc_interface_open; }
+int main(void) { xs_daemon_open(); xc_interface_open(); return 0; }
EOF
- if $cc $ARCH_CFLAGS -c -o $TMPO $TMPC -lxenstore -lxenctrl 2> /dev/null ; then
+ if $cc $CFLAGS $ARCH_CFLAGS -c -o $TMPO $TMPC $LDFLAGS -lxenstore -lxenctrl 2> /dev/null > /dev/null ; then
:
else
xen="no"
sdl_too_old=no
-if test -z "$sdl" ; then
+if test "$sdl" = "yes" ; then
sdl_config="sdl-config"
sdl=no
sdl_static=no
vnc_sasl_cflags=""
vnc_sasl_libs="-lsasl2"
if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $vnc_sasl_cflags $TMPC \
- $vnc_sasl_libs 2> /dev/null ; then
+ $vnc_sasl_libs 2> /dev/null > /dev/null ; then
:
else
vnc_sasl="no"
if test "$curses" = "yes" ; then
curses=no
+ ncurses=no
cat > $TMPC << EOF
#include <curses.h>
#ifdef __OpenBSD__
#endif
int main(void) { resize_term(0, 0); return curses_version(); }
EOF
- if $cc $ARCH_CFLAGS -o $TMPE $TMPC -lcurses > /dev/null 2> /dev/null ; then
+ if $cc $ARCH_CFLAGS -o $TMPE $TMPC -lncurses > /dev/null 2> /dev/null ; then
+ curses=yes
+ ncurses=yes
+ elif $cc $ARCH_CFLAGS -o $TMPE $TMPC -lcurses > /dev/null 2> /dev/null ; then
curses=yes
fi
fi # test "$curses"
+##########################################
+# curl probe
+
+if test "$curl" = "yes" ; then
+ curl=no
+ cat > $TMPC << EOF
+#include <curl/curl.h>
+int main(void) { return curl_easy_init(); }
+EOF
+ curl_libs=`curl-config --libs 2>/dev/null`
+ if $cc $ARCH_CFLAGS $curl_libs -o $TMPE $TMPC > /dev/null 2> /dev/null ; then
+ curl=yes
+ fi
+fi # test "$curl"
+
##########################################
# bluez support probe
if test "$bluez" = "yes" ; then
- `pkg-config bluez` || bluez="no"
+ `pkg-config bluez 2> /dev/null` || bluez="no"
fi
if test "$bluez" = "yes" ; then
cat > $TMPC << EOF
#include <bluetooth/bluetooth.h>
int main(void) { return bt_error(0); }
EOF
- bluez_cflags=`pkg-config --cflags bluez`
- bluez_libs=`pkg-config --libs bluez`
+ bluez_cflags=`pkg-config --cflags bluez 2> /dev/null`
+ bluez_libs=`pkg-config --libs bluez 2> /dev/null`
if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $bluez_cflags $TMPC \
$bluez_libs > /dev/null 2> /dev/null ; then
:
| grep "error: " \
| awk -F "error: " '{if (NR>1) printf(", "); printf("%s",$2);}'`
if test "$kvmerr" != "" ; then
- kvm="no - (${kvmerr})"
+ kvm="no - (${kvmerr})\n\
+ NOTE: To enable KVM support, update your kernel to 2.6.29+ or install \
+recent kvm-kmod from http://sourceforge.net/projects/kvm."
fi
fi
fi
fi
##########################################
-# AIO probe
-AIOLIBS=""
+# pthread probe
+PTHREADLIBS_LIST="-lpthread -lpthreadGC2"
+PTHREADLIBS=""
-if test "$aio" = "yes" ; then
- aio=no
- cat > $TMPC << EOF
+if test "$pthread" = yes; then
+ pthread=no
+cat > $TMPC << EOF
#include <pthread.h>
-int main(void) { pthread_mutex_t lock; return 0; }
+int main(void) { pthread_create(0,0,0,0); return 0; }
EOF
- if $cc $ARCH_CFLAGS -o $TMPE $AIOLIBS $TMPC 2> /dev/null ; then
- aio=yes
- AIOLIBS="-lpthread"
- fi
+ for pthread_lib in $PTHREADLIBS_LIST; do
+ if $cc $ARCH_CFLAGS -o $TMPE $TMPC $pthread_lib 2> /dev/null > /dev/null ; then
+ pthread=yes
+ PTHREADLIBS="$pthread_lib"
+ break
+ fi
+ done
+fi
+
+if test "$pthread" = no; then
+ aio=no
+ io_thread=no
fi
##########################################
cat > $TMPC << EOF
int main(void) { return 0; }
EOF
- if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $TMPC -lfdt 2> /dev/null ; then
+ if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $TMPC -lfdt 2> /dev/null > /dev/null ; then
fdt=yes
fi
fi
# have syscall stubs for these implemented.
#
atfile=no
-if [ "$linux_user" = "yes" ] ; then
- cat > $TMPC << EOF
+cat > $TMPC << EOF
#define _ATFILE_SOURCE
#include <sys/types.h>
#include <fcntl.h>
return (unlinkat(AT_FDCWD, "nonexistent_file", 0));
}
EOF
- if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null ; then
- atfile=yes
- fi
+if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null > /dev/null ; then
+ atfile=yes
fi
# Check for inotify functions when we are building linux-user
# don't provide them even if kernel supports them.
#
inotify=no
-if [ "$linux_user" = "yes" ] ; then
- cat > $TMPC << EOF
+cat > $TMPC << EOF
#include <sys/inotify.h>
int
return inotify_init();
}
EOF
- if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null ; then
- inotify=yes
- fi
+if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null > /dev/null ; then
+ inotify=yes
+fi
+
+# check if utimensat and futimens are supported
+utimens=no
+cat > $TMPC << EOF
+#define _ATFILE_SOURCE
+#define _GNU_SOURCE
+#include <stddef.h>
+#include <fcntl.h>
+
+int main(void)
+{
+ utimensat(AT_FDCWD, "foo", NULL, 0);
+ futimens(0, NULL);
+ return 0;
+}
+EOF
+if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null ; then
+ utimens=yes
+fi
+
+# check if pipe2 is there
+pipe2=no
+cat > $TMPC << EOF
+#define _GNU_SOURCE
+#include <unistd.h>
+#include <fcntl.h>
+
+int main(void)
+{
+ int pipefd[2];
+ pipe2(pipefd, O_CLOEXEC);
+ return 0;
+}
+EOF
+if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null ; then
+ pipe2=yes
+fi
+
+# check if tee/splice is there. vmsplice was added same time.
+splice=no
+cat > $TMPC << EOF
+#define _GNU_SOURCE
+#include <unistd.h>
+#include <fcntl.h>
+#include <limits.h>
+
+int main(void)
+{
+ int len, fd;
+ len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK);
+ splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE);
+ return 0;
+}
+EOF
+if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null ; then
+ splice=yes
fi
# Check if tools are available to build documentation.
-if [ -x "`which texi2html 2>/dev/null`" ] && \
- [ -x "`which pod2man 2>/dev/null`" ]; then
- build_docs="yes"
+if test "$build_docs" = "yes" -a \( ! -x "`which texi2html 2>/dev/null`" -o ! -x "`which pod2man 2>/dev/null`" \) ; then
+ build_docs="no"
fi
##########################################
# Do we need librt
+CLOCKLIBS=""
cat > $TMPC <<EOF
#include <signal.h>
#include <time.h>
fi
if test "$rt" = "yes" ; then
- # Hack, we should have a general purpose LIBS for this sort of thing
- AIOLIBS="$AIOLIBS -lrt"
+ CLOCKLIBS="-lrt"
fi
if test "$mingw32" = "yes" ; then
echo "SDL static link $sdl_static"
fi
echo "curses support $curses"
+echo "curl support $curl"
echo "mingw32 support $mingw32"
echo "Audio drivers $audio_drv_list"
echo "Extra audio cards $audio_card_list"
[ ! -z "$uname_release" ] && \
echo "uname -r $uname_release"
echo "NPTL support $nptl"
+echo "GUEST_BASE $guest_base"
echo "vde support $vde"
echo "AIO support $aio"
+echo "IO thread $io_thread"
echo "Install blobs $blobs"
-echo "KVM support $kvm"
+echo -e "KVM support $kvm"
echo "fdt support $fdt"
echo "preadv support $preadv"
if test $sdl_too_old = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
fi
-if [ -s $TMPSDLLOG ]; then
- echo "The error log from compiling the libSDL test is: "
- cat $TMPSDLLOG
-fi
#if test "$sdl_static" = "no"; then
# echo "WARNING: cannot compile statically with SDL - qemu-fast won't have a graphical output"
#fi
-config_mak="config-host.mak"
-config_h="config-host.h"
-
-#echo "Creating $config_mak and $config_h"
-test -f $config_h && mv $config_h ${config_h}~
-
-echo "# Automatically generated by configure - do not modify" > $config_mak
-printf "# Configured with:" >> $config_mak
-printf " '%s'" "$0" "$@" >> $config_mak
-echo >> $config_mak
-echo "/* Automatically generated by configure - do not modify */" > $config_h
-
-echo "prefix=$prefix" >> $config_mak
-echo "bindir=\${prefix}$binsuffix" >> $config_mak
-echo "mandir=\${prefix}$mansuffix" >> $config_mak
-echo "datadir=\${prefix}$datasuffix" >> $config_mak
-echo "docdir=\${prefix}$docsuffix" >> $config_mak
-echo "#define CONFIG_QEMU_SHAREDIR \"$prefix$datasuffix\"" >> $config_h
-echo "MAKE=$make" >> $config_mak
-echo "INSTALL=$install" >> $config_mak
-echo "INSTALL_DIR=$install -d -m0755 -p" >> $config_mak
-echo "INSTALL_DATA=$install -m0644 -p" >> $config_mak
-echo "INSTALL_PROG=$install -m0755 -p" >> $config_mak
-echo "CC=$cc" >> $config_mak
-echo "HOST_CC=$host_cc" >> $config_mak
-echo "AR=$ar" >> $config_mak
-# XXX: only use CFLAGS and LDFLAGS ?
-# XXX: should export HOST_CFLAGS and HOST_LDFLAGS for cross
-# compilation of dyngen tool (useful for win32 build on Linux host)
-echo "OS_CFLAGS=$OS_CFLAGS" >> $config_mak
-echo "OS_LDFLAGS=$OS_LDFLAGS" >> $config_mak
-echo "ARCH_CFLAGS=$ARCH_CFLAGS" >> $config_mak
-echo "ARCH_LDFLAGS=$ARCH_LDFLAGS" >> $config_mak
-echo "CFLAGS=$CFLAGS" >> $config_mak
-echo "LDFLAGS=$LDFLAGS" >> $config_mak
-echo "EXESUF=$EXESUF" >> $config_mak
-echo "AIOLIBS=$AIOLIBS" >> $config_mak
+config_host_mak="config-host.mak"
+config_host_h="config-host.h"
+
+#echo "Creating $config_host_mak and $config_host_h"
+
+test -f $config_host_h && mv $config_host_h ${config_host_h}~
+
+echo "# Automatically generated by configure - do not modify" > $config_host_mak
+printf "# Configured with:" >> $config_host_mak
+printf " '%s'" "$0" "$@" >> $config_host_mak
+echo >> $config_host_mak
+echo "/* Automatically generated by configure - do not modify */" > $config_host_h
+
+echo "prefix=$prefix" >> $config_host_mak
+echo "bindir=\${prefix}$binsuffix" >> $config_host_mak
+echo "mandir=\${prefix}$mansuffix" >> $config_host_mak
+echo "datadir=\${prefix}$datasuffix" >> $config_host_mak
+echo "docdir=\${prefix}$docsuffix" >> $config_host_mak
+echo "#define CONFIG_QEMU_SHAREDIR \"$prefix$datasuffix\"" >> $config_host_h
+echo "MAKE=$make" >> $config_host_mak
+echo "INSTALL=$install" >> $config_host_mak
+echo "INSTALL_DIR=$install -d -m0755 -p" >> $config_host_mak
+echo "INSTALL_DATA=$install -m0644 -p" >> $config_host_mak
+echo "INSTALL_PROG=$install -m0755 -p" >> $config_host_mak
+echo "CC=$cc" >> $config_host_mak
+echo "HOST_CC=$host_cc" >> $config_host_mak
+echo "AR=$ar" >> $config_host_mak
+echo "OBJCOPY=$objcopy" >> $config_host_mak
+echo "LD=$ld" >> $config_host_mak
+echo "CFLAGS=$CFLAGS $OS_CFLAGS $ARCH_CFLAGS $EXTRA_CFLAGS" >> $config_host_mak
+echo "LDFLAGS=$LDFLAGS $OS_LDFLAGS $ARCH_LDFLAGS $EXTRA_LDFLAGS" >> $config_host_mak
+echo "EXESUF=$EXESUF" >> $config_host_mak
+echo "PTHREADLIBS=$PTHREADLIBS" >> $config_host_mak
+echo "CLOCKLIBS=$CLOCKLIBS" >> $config_host_mak
case "$cpu" in
- i386)
- echo "ARCH=i386" >> $config_mak
- echo "#define HOST_I386 1" >> $config_h
- ;;
- x86_64)
- echo "ARCH=x86_64" >> $config_mak
- echo "#define HOST_X86_64 1" >> $config_h
+ i386|x86_64|alpha|cris|hppa|ia64|m68k|microblaze|mips|mips64|ppc|ppc64|s390|sparc|sparc64)
+ ARCH=$cpu
;;
- alpha)
- echo "ARCH=alpha" >> $config_mak
- echo "#define HOST_ALPHA 1" >> $config_h
- ;;
- armv4b)
- echo "ARCH=arm" >> $config_mak
- echo "#define HOST_ARM 1" >> $config_h
- ;;
- armv4l)
- echo "ARCH=arm" >> $config_mak
- echo "#define HOST_ARM 1" >> $config_h
- ;;
- cris)
- echo "ARCH=cris" >> $config_mak
- echo "#define HOST_CRIS 1" >> $config_h
- ;;
- hppa)
- echo "ARCH=hppa" >> $config_mak
- echo "#define HOST_HPPA 1" >> $config_h
- ;;
- ia64)
- echo "ARCH=ia64" >> $config_mak
- echo "#define HOST_IA64 1" >> $config_h
- ;;
- m68k)
- echo "ARCH=m68k" >> $config_mak
- echo "#define HOST_M68K 1" >> $config_h
- ;;
- mips)
- echo "ARCH=mips" >> $config_mak
- echo "#define HOST_MIPS 1" >> $config_h
- ;;
- mips64)
- echo "ARCH=mips64" >> $config_mak
- echo "#define HOST_MIPS64 1" >> $config_h
- ;;
- ppc)
- echo "ARCH=ppc" >> $config_mak
- echo "#define HOST_PPC 1" >> $config_h
- ;;
- ppc64)
- echo "ARCH=ppc64" >> $config_mak
- echo "#define HOST_PPC64 1" >> $config_h
- ;;
- s390)
- echo "ARCH=s390" >> $config_mak
- echo "#define HOST_S390 1" >> $config_h
- ;;
- sparc)
- echo "ARCH=sparc" >> $config_mak
- echo "#define HOST_SPARC 1" >> $config_h
- ;;
- sparc64)
- echo "ARCH=sparc64" >> $config_mak
- echo "#define HOST_SPARC64 1" >> $config_h
+ armv4b|armv4l)
+ ARCH=arm
;;
*)
echo "Unsupported CPU = $cpu"
exit 1
;;
esac
+echo "ARCH=$ARCH" >> $config_host_mak
+arch_name=`echo $ARCH | tr '[:lower:]' '[:upper:]'`
+echo "#define HOST_$arch_name 1" >> $config_host_h
+
if test "$debug_tcg" = "yes" ; then
- echo "#define DEBUG_TCG 1" >> $config_h
+ echo "#define DEBUG_TCG 1" >> $config_host_h
+fi
+if test "$debug" = "yes" ; then
+ echo "#define DEBUG_EXEC 1" >> $config_host_h
fi
if test "$sparse" = "yes" ; then
- echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_mak
- echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_mak
- echo "CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_mak
+ echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak
+ echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak
+ echo "CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
fi
if test "$strip_opt" = "yes" ; then
- echo "STRIP_OPT=-s" >> $config_mak
+ echo "STRIP_OPT=-s" >> $config_host_mak
fi
if test "$bigendian" = "yes" ; then
- echo "WORDS_BIGENDIAN=yes" >> $config_mak
- echo "#define WORDS_BIGENDIAN 1" >> $config_h
+ echo "WORDS_BIGENDIAN=yes" >> $config_host_mak
+ echo "#define WORDS_BIGENDIAN 1" >> $config_host_h
fi
-echo "#define HOST_LONG_BITS $hostlongbits" >> $config_h
+echo "#define HOST_LONG_BITS $hostlongbits" >> $config_host_h
if test "$mingw32" = "yes" ; then
- echo "CONFIG_WIN32=yes" >> $config_mak
- echo "#define CONFIG_WIN32 1" >> $config_h
+ echo "CONFIG_WIN32=y" >> $config_host_mak
+ echo "#define CONFIG_WIN32 1" >> $config_host_h
else
cat > $TMPC << EOF
#include <byteswap.h>
int main(void) { return bswap_32(0); }
EOF
if $cc $ARCH_CFLAGS -o $TMPE $TMPC >/dev/null 2> /dev/null ; then
- echo "#define HAVE_BYTESWAP_H 1" >> $config_h
+ echo "#define HAVE_BYTESWAP_H 1" >> $config_host_h
fi
cat > $TMPC << EOF
#include <sys/endian.h>
int main(void) { return bswap32(0); }
EOF
if $cc $ARCH_CFLAGS -o $TMPE $TMPC >/dev/null 2> /dev/null ; then
- echo "#define HAVE_MACHINE_BSWAP_H 1" >> $config_h
+ echo "#define HAVE_MACHINE_BSWAP_H 1" >> $config_host_h
fi
fi
if [ "$openbsd" = "yes" ] ; then
- echo "#define ENOTSUP 4096" >> $config_h
+ echo "#define ENOTSUP 4096" >> $config_host_h
fi
if test "$darwin" = "yes" ; then
- echo "CONFIG_DARWIN=yes" >> $config_mak
- echo "#define CONFIG_DARWIN 1" >> $config_h
+ echo "CONFIG_DARWIN=y" >> $config_host_mak
+ echo "#define CONFIG_DARWIN 1" >> $config_host_h
fi
if test "$aix" = "yes" ; then
- echo "CONFIG_AIX=yes" >> $config_mak
- echo "#define CONFIG_AIX 1" >> $config_h
+ echo "CONFIG_AIX=y" >> $config_host_mak
+ echo "#define CONFIG_AIX 1" >> $config_host_h
fi
if test "$solaris" = "yes" ; then
- echo "CONFIG_SOLARIS=yes" >> $config_mak
- echo "#define HOST_SOLARIS $solarisrev" >> $config_h
+ echo "CONFIG_SOLARIS=y" >> $config_host_mak
+ echo "#define CONFIG_SOLARIS 1" >> $config_host_h
+ echo "#define CONFIG_SOLARIS_VERSION $solarisrev" >> $config_host_h
if test "$needs_libsunmath" = "yes" ; then
- echo "NEEDS_LIBSUNMATH=yes" >> $config_mak
- echo "#define NEEDS_LIBSUNMATH 1" >> $config_h
+ echo "NEEDS_LIBSUNMATH=yes" >> $config_host_mak
+ echo "#define NEEDS_LIBSUNMATH 1" >> $config_host_h
fi
fi
if test -n "$sparc_cpu"; then
- echo "CONFIG__sparc_${sparc_cpu}__=yes" >> $config_mak
- echo "#define __sparc_${sparc_cpu}__ 1" >> $config_h
-fi
-if test "$gdbstub" = "yes" ; then
- echo "CONFIG_GDBSTUB=yes" >> $config_mak
- echo "#define CONFIG_GDBSTUB 1" >> $config_h
+ echo "CONFIG__sparc_${sparc_cpu}__=y" >> $config_host_mak
+ echo "#define __sparc_${sparc_cpu}__ 1" >> $config_host_h
fi
if test "$gprof" = "yes" ; then
- echo "TARGET_GPROF=yes" >> $config_mak
- echo "#define HAVE_GPROF 1" >> $config_h
+ echo "TARGET_GPROF=yes" >> $config_host_mak
+ echo "#define HAVE_GPROF 1" >> $config_host_h
fi
if test "$static" = "yes" ; then
- echo "CONFIG_STATIC=yes" >> $config_mak
- echo "#define CONFIG_STATIC 1" >> $config_h
+ echo "CONFIG_STATIC=y" >> $config_host_mak
+ echo "#define CONFIG_STATIC 1" >> $config_host_h
fi
if test $profiler = "yes" ; then
- echo "#define CONFIG_PROFILER 1" >> $config_h
+ echo "#define CONFIG_PROFILER 1" >> $config_host_h
fi
if test "$slirp" = "yes" ; then
- echo "CONFIG_SLIRP=yes" >> $config_mak
- echo "#define CONFIG_SLIRP 1" >> $config_h
+ echo "CONFIG_SLIRP=y" >> $config_host_mak
+ echo "#define CONFIG_SLIRP 1" >> $config_host_h
fi
if test "$vde" = "yes" ; then
- echo "CONFIG_VDE=yes" >> $config_mak
- echo "#define CONFIG_VDE 1" >> $config_h
- echo "VDE_LIBS=-lvdeplug" >> $config_mak
+ echo "CONFIG_VDE=y" >> $config_host_mak
+ echo "#define CONFIG_VDE 1" >> $config_host_h
+ echo "VDE_LIBS=-lvdeplug" >> $config_host_mak
fi
for card in $audio_card_list; do
def=CONFIG_`echo $card | tr '[:lower:]' '[:upper:]'`
- echo "$def=yes" >> $config_mak
- echo "#define $def 1" >> $config_h
+ echo "$def=y" >> $config_host_mak
+ echo "#define $def 1" >> $config_host_h
done
-echo "#define AUDIO_DRIVERS \\" >> $config_h
+echo "#define AUDIO_DRIVERS \\" >> $config_host_h
for drv in $audio_drv_list; do
- echo " &${drv}_audio_driver, \\" >>$config_h
+ echo " &${drv}_audio_driver, \\" >>$config_host_h
def=CONFIG_`echo $drv | tr '[:lower:]' '[:upper:]'`
- echo "$def=yes" >> $config_mak
+ echo "$def=y" >> $config_host_mak
if test "$drv" = "fmod"; then
- echo "CONFIG_FMOD_LIB=$fmod_lib" >> $config_mak
- echo "CONFIG_FMOD_INC=$fmod_inc" >> $config_mak
+ echo "CONFIG_FMOD_LIB=$fmod_lib" >> $config_host_mak
+ echo "CONFIG_FMOD_INC=$fmod_inc" >> $config_host_mak
elif test "$drv" = "oss"; then
- echo "CONFIG_OSS_LIB=$oss_lib" >> $config_mak
+ echo "CONFIG_OSS_LIB=$oss_lib" >> $config_host_mak
fi
done
-echo "" >>$config_h
+echo "" >>$config_host_h
if test "$mixemu" = "yes" ; then
- echo "CONFIG_MIXEMU=yes" >> $config_mak
- echo "#define CONFIG_MIXEMU 1" >> $config_h
+ echo "CONFIG_MIXEMU=y" >> $config_host_mak
+ echo "#define CONFIG_MIXEMU 1" >> $config_host_h
fi
if test "$vnc_tls" = "yes" ; then
- echo "CONFIG_VNC_TLS=yes" >> $config_mak
- echo "CONFIG_VNC_TLS_CFLAGS=$vnc_tls_cflags" >> $config_mak
- echo "CONFIG_VNC_TLS_LIBS=$vnc_tls_libs" >> $config_mak
- echo "#define CONFIG_VNC_TLS 1" >> $config_h
+ echo "CONFIG_VNC_TLS=y" >> $config_host_mak
+ echo "CONFIG_VNC_TLS_CFLAGS=$vnc_tls_cflags" >> $config_host_mak
+ echo "CONFIG_VNC_TLS_LIBS=$vnc_tls_libs" >> $config_host_mak
+ echo "#define CONFIG_VNC_TLS 1" >> $config_host_h
fi
if test "$vnc_sasl" = "yes" ; then
- echo "CONFIG_VNC_SASL=yes" >> $config_mak
- echo "CONFIG_VNC_SASL_CFLAGS=$vnc_sasl_cflags" >> $config_mak
- echo "CONFIG_VNC_SASL_LIBS=$vnc_sasl_libs" >> $config_mak
- echo "#define CONFIG_VNC_SASL 1" >> $config_h
+ echo "CONFIG_VNC_SASL=y" >> $config_host_mak
+ echo "CONFIG_VNC_SASL_CFLAGS=$vnc_sasl_cflags" >> $config_host_mak
+ echo "CONFIG_VNC_SASL_LIBS=$vnc_sasl_libs" >> $config_host_mak
+ echo "#define CONFIG_VNC_SASL 1" >> $config_host_h
fi
if test "$fnmatch" = "yes" ; then
- echo "#define HAVE_FNMATCH_H 1" >> $config_h
+ echo "#define HAVE_FNMATCH_H 1" >> $config_host_h
fi
qemu_version=`head $source_path/VERSION`
-echo "VERSION=$qemu_version" >>$config_mak
-echo "#define QEMU_VERSION \"$qemu_version\"" >> $config_h
+echo "VERSION=$qemu_version" >>$config_host_mak
+echo "#define QEMU_VERSION \"$qemu_version\"" >> $config_host_h
-echo "#define QEMU_PKGVERSION \"$pkgversion\"" >> $config_h
+echo "#define QEMU_PKGVERSION \"$pkgversion\"" >> $config_host_h
-echo "SRC_PATH=$source_path" >> $config_mak
+echo "SRC_PATH=$source_path" >> $config_host_mak
if [ "$source_path_used" = "yes" ]; then
- echo "VPATH=$source_path" >> $config_mak
+ echo "VPATH=$source_path" >> $config_host_mak
fi
-echo "TARGET_DIRS=$target_list" >> $config_mak
+echo "TARGET_DIRS=$target_list" >> $config_host_mak
if [ "$build_docs" = "yes" ] ; then
- echo "BUILD_DOCS=yes" >> $config_mak
+ echo "BUILD_DOCS=yes" >> $config_host_mak
fi
if test "$static" = "yes"; then
sdl1=$sdl_static
sdl1=$sdl
fi
if test "$sdl1" = "yes" ; then
- echo "#define CONFIG_SDL 1" >> $config_h
- echo "CONFIG_SDL=yes" >> $config_mak
+ echo "#define CONFIG_SDL 1" >> $config_host_h
+ echo "CONFIG_SDL=y" >> $config_host_mak
if test "$target_softmmu" = "no" -o "$static" = "yes"; then
- echo "SDL_LIBS=$sdl_static_libs" >> $config_mak
+ echo "SDL_LIBS=$sdl_static_libs" >> $config_host_mak
elif test "$sdl_x11" = "yes" ; then
- echo "SDL_LIBS=`$sdl_config --libs` -lX11" >> $config_mak
+ echo "SDL_LIBS=`$sdl_config --libs` -lX11" >> $config_host_mak
else
- echo "SDL_LIBS=`$sdl_config --libs`" >> $config_mak
+ echo "SDL_LIBS=`$sdl_config --libs`" >> $config_host_mak
fi
if [ "${aa}" = "yes" ] ; then
- echo "SDL_CFLAGS=`$sdl_config --cflags` `aalib-config --cflags`" >> $config_mak
+ echo "SDL_CFLAGS=`$sdl_config --cflags` `aalib-config --cflags`" >> $config_host_mak
else
- echo "SDL_CFLAGS=`$sdl_config --cflags`" >> $config_mak
+ echo "SDL_CFLAGS=`$sdl_config --cflags`" >> $config_host_mak
fi
fi
if test "$cocoa" = "yes" ; then
- echo "#define CONFIG_COCOA 1" >> $config_h
- echo "CONFIG_COCOA=yes" >> $config_mak
+ echo "#define CONFIG_COCOA 1" >> $config_host_h
+ echo "CONFIG_COCOA=y" >> $config_host_mak
fi
if test "$curses" = "yes" ; then
- echo "#define CONFIG_CURSES 1" >> $config_h
- echo "CONFIG_CURSES=yes" >> $config_mak
- echo "CURSES_LIBS=-lcurses" >> $config_mak
+ echo "#define CONFIG_CURSES 1" >> $config_host_h
+ echo "CONFIG_CURSES=y" >> $config_host_mak
+ if test "$ncurses" = "yes" ; then
+ echo "CURSES_LIBS=-lncurses" >> $config_host_mak
+ else
+ echo "CURSES_LIBS=-lcurses" >> $config_host_mak
+ fi
fi
if test "$atfile" = "yes" ; then
- echo "#define CONFIG_ATFILE 1" >> $config_h
+ echo "#define CONFIG_ATFILE 1" >> $config_host_h
+fi
+if test "$utimens" = "yes" ; then
+ echo "#define CONFIG_UTIMENSAT 1" >> $config_host_h
+fi
+if test "$pipe2" = "yes" ; then
+ echo "#define CONFIG_PIPE2 1" >> $config_host_h
+fi
+if test "$splice" = "yes" ; then
+ echo "#define CONFIG_SPLICE 1" >> $config_host_h
fi
if test "$inotify" = "yes" ; then
- echo "#define CONFIG_INOTIFY 1" >> $config_h
+ echo "#define CONFIG_INOTIFY 1" >> $config_host_h
+fi
+if test "$curl" = "yes" ; then
+ echo "CONFIG_CURL=y" >> $config_host_mak
+ echo "CURL_LIBS=$curl_libs" >> $config_host_mak
+ echo "#define CONFIG_CURL 1" >> $config_host_h
fi
if test "$brlapi" = "yes" ; then
- echo "CONFIG_BRLAPI=yes" >> $config_mak
- echo "#define CONFIG_BRLAPI 1" >> $config_h
- echo "BRLAPI_LIBS=-lbrlapi" >> $config_mak
+ echo "CONFIG_BRLAPI=y" >> $config_host_mak
+ echo "#define CONFIG_BRLAPI 1" >> $config_host_h
+ echo "BRLAPI_LIBS=-lbrlapi" >> $config_host_mak
fi
if test "$bluez" = "yes" ; then
- echo "CONFIG_BLUEZ=yes" >> $config_mak
- echo "CONFIG_BLUEZ_CFLAGS=$bluez_cflags" >> $config_mak
- echo "CONFIG_BLUEZ_LIBS=$bluez_libs" >> $config_mak
- echo "#define CONFIG_BLUEZ 1" >> $config_h
+ echo "CONFIG_BLUEZ=y" >> $config_host_mak
+ echo "CONFIG_BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak
+ echo "CONFIG_BLUEZ_LIBS=$bluez_libs" >> $config_host_mak
+ echo "#define CONFIG_BLUEZ 1" >> $config_host_h
fi
if test "$xen" = "yes" ; then
- echo "XEN_LIBS=-lxenstore -lxenctrl" >> $config_mak
+ echo "XEN_LIBS=-lxenstore -lxenctrl -lxenguest" >> $config_host_mak
fi
if test "$aio" = "yes" ; then
- echo "#define CONFIG_AIO 1" >> $config_h
- echo "CONFIG_AIO=yes" >> $config_mak
+ echo "#define CONFIG_AIO 1" >> $config_host_h
+ echo "CONFIG_AIO=y" >> $config_host_mak
+fi
+if test "$io_thread" = "yes" ; then
+ echo "CONFIG_IOTHREAD=y" >> $config_host_mak
+ echo "#define CONFIG_IOTHREAD 1" >> $config_host_h
fi
if test "$blobs" = "yes" ; then
- echo "INSTALL_BLOBS=yes" >> $config_mak
+ echo "INSTALL_BLOBS=yes" >> $config_host_mak
fi
if test "$iovec" = "yes" ; then
- echo "#define HAVE_IOVEC 1" >> $config_h
+ echo "#define HAVE_IOVEC 1" >> $config_host_h
fi
if test "$preadv" = "yes" ; then
- echo "#define HAVE_PREADV 1" >> $config_h
+ echo "#define HAVE_PREADV 1" >> $config_host_h
fi
if test "$fdt" = "yes" ; then
- echo "#define HAVE_FDT 1" >> $config_h
- echo "FDT_LIBS=-lfdt" >> $config_mak
+ echo "#define HAVE_FDT 1" >> $config_host_h
+ echo "FDT_LIBS=-lfdt" >> $config_host_mak
fi
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
- echo "#define O_LARGEFILE 0" >> $config_h
- echo "#define MAP_ANONYMOUS MAP_ANON" >> $config_h
- echo "#define HOST_BSD 1" >> $config_h
+ echo "#define O_LARGEFILE 0" >> $config_host_h
+ echo "#define MAP_ANONYMOUS MAP_ANON" >> $config_host_h
+ echo "#define HOST_BSD 1" >> $config_host_h
fi
-echo "#define CONFIG_UNAME_RELEASE \"$uname_release\"" >> $config_h
+echo "#define CONFIG_UNAME_RELEASE \"$uname_release\"" >> $config_host_h
# USB host support
case "$usb" in
linux)
- echo "HOST_USB=linux" >> $config_mak
+ echo "HOST_USB=linux" >> $config_host_mak
;;
bsd)
- echo "HOST_USB=bsd" >> $config_mak
+ echo "HOST_USB=bsd" >> $config_host_mak
;;
*)
- echo "HOST_USB=stub" >> $config_mak
+ echo "HOST_USB=stub" >> $config_host_mak
;;
esac
+# Determine what linker flags to use to force archive inclusion
+check_linker_flags()
+{
+ w2=
+ if test "$2" ; then
+ w2=-Wl,$2
+ fi
+ $cc $ARCH_CFLAGS -o $TMPE $OS_CFLAGS $TMPC -Wl,$1 ${w2} >/dev/null 2>/dev/null
+}
+
+cat > $TMPC << EOF
+int main(void) { }
+EOF
+if check_linker_flags --whole-archive --no-whole-archive ; then
+ # GNU ld
+ echo "ARLIBS_BEGIN=-Wl,--whole-archive" >> $config_host_mak
+ echo "ARLIBS_END=-Wl,--no-whole-archive" >> $config_host_mak
+elif check_linker_flags -z,allextract -z,defaultextract ; then
+ # Solaris ld
+ echo "ARLIBS_BEGIN=-Wl,-z,allextract" >> $config_host_mak
+ echo "ARLIBS_END=-Wl,-z,defaultextract" >> $config_host_mak
+elif check_linker_flags -all_load ; then
+ # Mac OS X
+ echo "ARLIBS_BEGIN=-all_load" >> $config_host_mak
+ echo "ARLIBS_END=" >> $config_host_mak
+else
+ echo "Error: your linker does not support --whole-archive or -z."
+ exit 1
+fi
+
+if test "$xen" = "yes" ;
+ then
+ echo "CONFIG_XEN=y" >> $config_host_mak
+fi
+
tools=
if test `expr "$target_list" : ".*softmmu.*"` != 0 ; then
tools="qemu-img\$(EXESUF) $tools"
tools="qemu-nbd\$(EXESUF) qemu-io\$(EXESUF) $tools"
fi
fi
-echo "TOOLS=$tools" >> $config_mak
+echo "TOOLS=$tools" >> $config_host_mak
-test -f ${config_h}~ && cmp -s $config_h ${config_h}~ && mv ${config_h}~ $config_h
+roms=
+if test "$cpu" = "i386" -o "$cpu" = "x86_64" ; then
+ roms="pc-bios/optionrom"
+fi
+echo "ROMS=$roms" >> $config_host_mak
+
+if test -f ${config_host_h}~ ; then
+ if cmp -s $config_host_h ${config_host_h}~ ; then
+ mv ${config_host_h}~ $config_host_h
+ else
+ rm ${config_host_h}~
+ fi
+fi
for target in $target_list; do
target_dir="$target"
config_mak=$target_dir/config.mak
config_h=$target_dir/config.h
-target_cpu=`echo $target | cut -d '-' -f 1`
+target_arch2=`echo $target | cut -d '-' -f 1`
target_bigendian="no"
-[ "$target_cpu" = "armeb" ] && target_bigendian=yes
-[ "$target_cpu" = "m68k" ] && target_bigendian=yes
-[ "$target_cpu" = "mips" ] && target_bigendian=yes
-[ "$target_cpu" = "mipsn32" ] && target_bigendian=yes
-[ "$target_cpu" = "mips64" ] && target_bigendian=yes
-[ "$target_cpu" = "ppc" ] && target_bigendian=yes
-[ "$target_cpu" = "ppcemb" ] && target_bigendian=yes
-[ "$target_cpu" = "ppc64" ] && target_bigendian=yes
-[ "$target_cpu" = "ppc64abi32" ] && target_bigendian=yes
-[ "$target_cpu" = "sh4eb" ] && target_bigendian=yes
-[ "$target_cpu" = "sparc" ] && target_bigendian=yes
-[ "$target_cpu" = "sparc64" ] && target_bigendian=yes
-[ "$target_cpu" = "sparc32plus" ] && target_bigendian=yes
+case "$target_arch2" in
+ armeb|m68k|microblaze|mips|mipsn32|mips64|ppc|ppcemb|ppc64|ppc64abi32|sh4eb|sparc|sparc64|sparc32plus)
+ target_bigendian=yes
+ ;;
+esac
target_softmmu="no"
target_user_only="no"
target_linux_user="no"
target_darwin_user="no"
target_bsd_user="no"
case "$target" in
- ${target_cpu}-softmmu)
+ ${target_arch2}-softmmu)
target_softmmu="yes"
;;
- ${target_cpu}-linux-user)
+ ${target_arch2}-linux-user)
target_user_only="yes"
target_linux_user="yes"
;;
- ${target_cpu}-darwin-user)
+ ${target_arch2}-darwin-user)
target_user_only="yes"
target_darwin_user="yes"
;;
- ${target_cpu}-bsd-user)
+ ${target_arch2}-bsd-user)
target_user_only="yes"
target_bsd_user="yes"
;;
;;
esac
-if test "$target_user_only" = "no" -a "$check_gfx" = "yes" \
- -a "$sdl" = "no" -a "$cocoa" = "no" ; then
- echo "ERROR: QEMU requires SDL or Cocoa for graphical output"
- echo "To build QEMU without graphical output configure with --disable-gfx-check"
- echo "Note that this will disable all output from the virtual graphics card"
- echo "except through VNC or curses."
- exit 1;
-fi
-
#echo "Creating $config_mak, $config_h and $target_dir/Makefile"
test -f $config_h && mv $config_h ${config_h}~
echo "# Automatically generated by configure - do not modify" > $config_mak
-echo "/* Automatically generated by configure - do not modify */" > $config_h
-
echo "include ../config-host.mak" >> $config_mak
-echo "#include \"../config-host.h\"" >> $config_h
bflt="no"
elfload32="no"
target_nptl="no"
-interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_cpu/g"`
-echo "#define CONFIG_QEMU_PREFIX \"$interp_prefix1\"" >> $config_h
+interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"`
+echo "CONFIG_QEMU_PREFIX=\"$interp_prefix1\"" >> $config_mak
gdb_xml_files=""
-# Make sure the target and host cpus are compatible
-if test "$kvm" = "yes" -a ! \( "$target_cpu" = "$cpu" -o \
- \( "$target_cpu" = "ppcemb" -a "$cpu" = "ppc" \) -o \
- \( "$target_cpu" = "x86_64" -a "$cpu" = "i386" \) -o \
- \( "$target_cpu" = "i386" -a "$cpu" = "x86_64" \) \) ; then
- kvm="no"
-fi
-# Disable KVM for linux-user
-if test "$kvm" = "yes" -a "$target_softmmu" = "no" ; then
- kvm="no"
-fi
+TARGET_ARCH="$target_arch2"
+TARGET_BASE_ARCH=""
+TARGET_ABI_DIR=""
-case "$target_cpu" in
+case "$target_arch2" in
i386)
- echo "TARGET_ARCH=i386" >> $config_mak
- echo "#define TARGET_ARCH \"i386\"" >> $config_h
- echo "#define TARGET_I386 1" >> $config_h
- if test $kqemu = "yes" -a "$target_softmmu" = "yes"
- then
- echo "CONFIG_KQEMU=yes" >> $config_mak
- echo "#define CONFIG_KQEMU 1" >> $config_h
- fi
- if test "$kvm" = "yes" ; then
- echo "CONFIG_KVM=yes" >> $config_mak
- echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
- echo "#define CONFIG_KVM 1" >> $config_h
- fi
- if test "$xen" = "yes" -a "$target_softmmu" = "yes";
- then
- echo "CONFIG_XEN=yes" >> $config_mak
- echo "#define CONFIG_XEN 1" >> $config_h
- fi
+ target_phys_bits=32
;;
x86_64)
- echo "TARGET_ARCH=x86_64" >> $config_mak
- echo "#define TARGET_ARCH \"x86_64\"" >> $config_h
- echo "#define TARGET_I386 1" >> $config_h
- echo "#define TARGET_X86_64 1" >> $config_h
- if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64"
- then
- echo "CONFIG_KQEMU=yes" >> $config_mak
- echo "#define CONFIG_KQEMU 1" >> $config_h
- fi
- if test "$kvm" = "yes" ; then
- echo "CONFIG_KVM=yes" >> $config_mak
- echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
- echo "#define CONFIG_KVM 1" >> $config_h
- fi
- if test "$xen" = "yes" -a "$target_softmmu" = "yes"
- then
- echo "CONFIG_XEN=yes" >> $config_mak
- echo "#define CONFIG_XEN 1" >> $config_h
- fi
+ TARGET_BASE_ARCH=i386
+ target_phys_bits=64
;;
alpha)
- echo "TARGET_ARCH=alpha" >> $config_mak
- echo "#define TARGET_ARCH \"alpha\"" >> $config_h
- echo "#define TARGET_ALPHA 1" >> $config_h
+ target_phys_bits=64
;;
arm|armeb)
- echo "TARGET_ARCH=arm" >> $config_mak
- echo "#define TARGET_ARCH \"arm\"" >> $config_h
- echo "#define TARGET_ARM 1" >> $config_h
+ TARGET_ARCH=arm
bflt="yes"
target_nptl="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
+ target_phys_bits=32
;;
cris)
- echo "TARGET_ARCH=cris" >> $config_mak
- echo "#define TARGET_ARCH \"cris\"" >> $config_h
- echo "#define TARGET_CRIS 1" >> $config_h
target_nptl="yes"
+ target_phys_bits=32
;;
m68k)
- echo "TARGET_ARCH=m68k" >> $config_mak
- echo "#define TARGET_ARCH \"m68k\"" >> $config_h
- echo "#define TARGET_M68K 1" >> $config_h
bflt="yes"
gdb_xml_files="cf-core.xml cf-fp.xml"
+ target_phys_bits=32
+ ;;
+ microblaze)
+ bflt="yes"
+ target_nptl="yes"
+ target_phys_bits=32
;;
mips|mipsel)
- echo "TARGET_ARCH=mips" >> $config_mak
- echo "#define TARGET_ARCH \"mips\"" >> $config_h
- echo "#define TARGET_MIPS 1" >> $config_h
- echo "#define TARGET_ABI_MIPSO32 1" >> $config_h
+ TARGET_ARCH=mips
+ echo "TARGET_ABI_MIPSO32=y" >> $config_mak
+ target_nptl="yes"
+ target_phys_bits=64
;;
mipsn32|mipsn32el)
- echo "TARGET_ARCH=mipsn32" >> $config_mak
- echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h
- echo "#define TARGET_MIPS 1" >> $config_h
- echo "#define TARGET_ABI_MIPSN32 1" >> $config_h
+ TARGET_ARCH=mipsn32
+ TARGET_BASE_ARCH=mips
+ echo "TARGET_ABI_MIPSN32=y" >> $config_mak
+ target_phys_bits=64
;;
mips64|mips64el)
- echo "TARGET_ARCH=mips64" >> $config_mak
- echo "#define TARGET_ARCH \"mips64\"" >> $config_h
- echo "#define TARGET_MIPS 1" >> $config_h
- echo "#define TARGET_MIPS64 1" >> $config_h
- echo "#define TARGET_ABI_MIPSN64 1" >> $config_h
+ TARGET_ARCH=mips64
+ TARGET_BASE_ARCH=mips
+ echo "TARGET_ABI_MIPSN64=y" >> $config_mak
+ target_phys_bits=64
;;
ppc)
- echo "TARGET_ARCH=ppc" >> $config_mak
- echo "#define TARGET_ARCH \"ppc\"" >> $config_h
- echo "#define TARGET_PPC 1" >> $config_h
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
+ target_phys_bits=32
;;
ppcemb)
- echo "TARGET_ARCH=ppcemb" >> $config_mak
- echo "TARGET_ABI_DIR=ppc" >> $config_mak
- echo "#define TARGET_ARCH \"ppcemb\"" >> $config_h
- echo "#define TARGET_PPC 1" >> $config_h
- echo "#define TARGET_PPCEMB 1" >> $config_h
- if test "$kvm" = "yes" ; then
- echo "CONFIG_KVM=yes" >> $config_mak
- echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
- echo "#define CONFIG_KVM 1" >> $config_h
- fi
+ TARGET_BASE_ARCH=ppc
+ TARGET_ABI_DIR=ppc
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
+ target_phys_bits=64
;;
ppc64)
- echo "TARGET_ARCH=ppc64" >> $config_mak
- echo "TARGET_ABI_DIR=ppc" >> $config_mak
- echo "#define TARGET_ARCH \"ppc64\"" >> $config_h
- echo "#define TARGET_PPC 1" >> $config_h
- echo "#define TARGET_PPC64 1" >> $config_h
+ TARGET_BASE_ARCH=ppc
+ TARGET_ABI_DIR=ppc
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
+ target_phys_bits=64
;;
ppc64abi32)
- echo "TARGET_ARCH=ppc64" >> $config_mak
- echo "TARGET_ABI_DIR=ppc" >> $config_mak
- echo "TARGET_ARCH2=ppc64abi32" >> $config_mak
- echo "#define TARGET_ARCH \"ppc64\"" >> $config_h
- echo "#define TARGET_PPC 1" >> $config_h
- echo "#define TARGET_PPC64 1" >> $config_h
- echo "#define TARGET_ABI32 1" >> $config_h
+ TARGET_ARCH=ppc64
+ TARGET_BASE_ARCH=ppc
+ TARGET_ABI_DIR=ppc
+ echo "TARGET_ABI32=y" >> $config_mak
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
+ target_phys_bits=64
;;
sh4|sh4eb)
- echo "TARGET_ARCH=sh4" >> $config_mak
- echo "#define TARGET_ARCH \"sh4\"" >> $config_h
- echo "#define TARGET_SH4 1" >> $config_h
+ TARGET_ARCH=sh4
bflt="yes"
target_nptl="yes"
+ target_phys_bits=32
;;
sparc)
- echo "TARGET_ARCH=sparc" >> $config_mak
- echo "#define TARGET_ARCH \"sparc\"" >> $config_h
- echo "#define TARGET_SPARC 1" >> $config_h
+ target_phys_bits=64
;;
sparc64)
- echo "TARGET_ARCH=sparc64" >> $config_mak
- echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
- echo "#define TARGET_SPARC 1" >> $config_h
- echo "#define TARGET_SPARC64 1" >> $config_h
+ TARGET_BASE_ARCH=sparc
elfload32="yes"
+ target_phys_bits=64
;;
sparc32plus)
- echo "TARGET_ARCH=sparc64" >> $config_mak
- echo "TARGET_ABI_DIR=sparc" >> $config_mak
- echo "TARGET_ARCH2=sparc32plus" >> $config_mak
- echo "#define TARGET_ARCH \"sparc64\"" >> $config_h
- echo "#define TARGET_SPARC 1" >> $config_h
- echo "#define TARGET_SPARC64 1" >> $config_h
- echo "#define TARGET_ABI32 1" >> $config_h
+ TARGET_ARCH=sparc64
+ TARGET_BASE_ARCH=sparc
+ TARGET_ABI_DIR=sparc
+ echo "TARGET_ABI32=y" >> $config_mak
+ target_phys_bits=64
;;
*)
echo "Unsupported target CPU"
exit 1
;;
esac
+echo "TARGET_ARCH=$TARGET_ARCH" >> $config_mak
+echo "TARGET_ARCH2=$target_arch2" >> $config_mak
+# TARGET_BASE_ARCH needs to be defined after TARGET_ARCH
+if [ "$TARGET_BASE_ARCH" = "" ]; then
+ TARGET_BASE_ARCH=$TARGET_ARCH
+fi
+echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_mak
+if [ "$TARGET_ABI_DIR" = "" ]; then
+ TARGET_ABI_DIR=$TARGET_ARCH
+fi
+echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_mak
+if [ $target_phys_bits -lt $hostlongbits ] ; then
+ target_phys_bits=$hostlongbits
+fi
+case "$target_arch2" in
+ i386|x86_64)
+ if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
+ echo "CONFIG_XEN=y" >> $config_mak
+ fi
+ if test $kqemu = "yes" -a "$target_softmmu" = "yes"
+ then
+ echo "CONFIG_KQEMU=y" >> $config_mak
+ fi
+esac
+case "$target_arch2" in
+ i386|x86_64|ppcemb|ppc|ppc64)
+ # Make sure the target and host cpus are compatible
+ if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
+ \( "$target_arch2" = "$cpu" -o \
+ \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc" \) -o \
+ \( "$target_arch2" = "ppc64" -a "$cpu" = "ppc" \) -o \
+ \( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
+ \( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
+ echo "CONFIG_KVM=y" >> $config_mak
+ echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
+ fi
+esac
+echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak
+echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits" >> $config_mak
+echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
if test "$target_bigendian" = "yes" ; then
- echo "TARGET_WORDS_BIGENDIAN=yes" >> $config_mak
- echo "#define TARGET_WORDS_BIGENDIAN 1" >> $config_h
+ echo "TARGET_WORDS_BIGENDIAN=y" >> $config_mak
fi
if test "$target_softmmu" = "yes" ; then
- echo "CONFIG_SOFTMMU=yes" >> $config_mak
- echo "#define CONFIG_SOFTMMU 1" >> $config_h
+ echo "CONFIG_SOFTMMU=y" >> $config_mak
fi
if test "$target_user_only" = "yes" ; then
- echo "CONFIG_USER_ONLY=yes" >> $config_mak
- echo "#define CONFIG_USER_ONLY 1" >> $config_h
+ echo "CONFIG_USER_ONLY=y" >> $config_mak
fi
if test "$target_linux_user" = "yes" ; then
- echo "CONFIG_LINUX_USER=yes" >> $config_mak
- echo "#define CONFIG_LINUX_USER 1" >> $config_h
+ echo "CONFIG_LINUX_USER=y" >> $config_mak
fi
if test "$target_darwin_user" = "yes" ; then
- echo "CONFIG_DARWIN_USER=yes" >> $config_mak
- echo "#define CONFIG_DARWIN_USER 1" >> $config_h
+ echo "CONFIG_DARWIN_USER=y" >> $config_mak
fi
list=""
if test ! -z "$gdb_xml_files" ; then
fi
echo "TARGET_XML_FILES=$list" >> $config_mak
-if test "$target_cpu" = "arm" \
- -o "$target_cpu" = "armeb" \
- -o "$target_cpu" = "m68k" \
- -o "$target_cpu" = "mips" \
- -o "$target_cpu" = "mipsel" \
- -o "$target_cpu" = "mipsn32" \
- -o "$target_cpu" = "mipsn32el" \
- -o "$target_cpu" = "mips64" \
- -o "$target_cpu" = "mips64el" \
- -o "$target_cpu" = "ppc" \
- -o "$target_cpu" = "ppc64" \
- -o "$target_cpu" = "ppc64abi32" \
- -o "$target_cpu" = "ppcemb" \
- -o "$target_cpu" = "sparc" \
- -o "$target_cpu" = "sparc64" \
- -o "$target_cpu" = "sparc32plus"; then
- echo "CONFIG_SOFTFLOAT=yes" >> $config_mak
- echo "#define CONFIG_SOFTFLOAT 1" >> $config_h
-fi
+case "$target_arch2" in
+ arm|armeb|m68k|microblaze|mips|mipsel|mipsn32|mipsn32el|mips64|mips64el|ppc|ppc64|ppc64abi32|ppcemb|sparc|sparc64|sparc32plus)
+ echo "CONFIG_SOFTFLOAT=y" >> $config_mak
+ ;;
+esac
+
if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then
- echo "TARGET_HAS_BFLT=yes" >> $config_mak
- echo "#define TARGET_HAS_BFLT 1" >> $config_h
+ echo "TARGET_HAS_BFLT=y" >> $config_mak
fi
if test "$target_user_only" = "yes" \
-a "$nptl" = "yes" -a "$target_nptl" = "yes"; then
- echo "#define USE_NPTL 1" >> $config_h
+ echo "USE_NPTL=y" >> $config_mak
fi
# 32 bit ELF loader in addition to native 64 bit loader?
if test "$target_user_only" = "yes" -a "$elfload32" = "yes"; then
- echo "TARGET_HAS_ELFLOAD32=yes" >> $config_mak
- echo "#define TARGET_HAS_ELFLOAD32 1" >> $config_h
+ echo "TARGET_HAS_ELFLOAD32=y" >> $config_mak
+fi
+if test "$target_user_only" = "yes" -a "$guest_base" = "yes"; then
+ echo "CONFIG_USE_GUEST_BASE=y" >> $config_mak
fi
if test "$target_bsd_user" = "yes" ; then
- echo "CONFIG_BSD_USER=yes" >> $config_mak
- echo "#define CONFIG_BSD_USER 1" >> $config_h
+ echo "CONFIG_BSD_USER=y" >> $config_mak
fi
+$source_path/create_config < $config_mak > $config_h
+
test -f ${config_h}~ && cmp -s $config_h ${config_h}~ && mv ${config_h}~ $config_h
done # for target in $targets
# build tree in object directory if source path is different from current one
if test "$source_path_used" = "yes" ; then
- DIRS="tests tests/cris slirp audio"
+ DIRS="tests tests/cris slirp audio block pc-bios/optionrom"
FILES="Makefile tests/Makefile"
FILES="$FILES tests/cris/Makefile tests/cris/.gdbinit"
FILES="$FILES tests/test-mmap.c"
+ FILES="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps pc-bios/video.x"
+ for bios_file in $source_path/pc-bios/*.bin $source_path/pc-bios/*.dtb $source_path/pc-bios/openbios-*; do
+ FILES="$FILES pc-bios/`basename $bios_file`"
+ done
for dir in $DIRS ; do
mkdir -p $dir
done
ln -s $source_path/$f $f
done
fi
+
+for hwlib in 32 64; do
+ d=libhw$hwlib
+ mkdir -p $d
+ rm -f $d/Makefile
+ ln -s $source_path/Makefile.hw $d/Makefile
+ echo "HWLIB=libqemuhw$hwlib.a" > $d/config.mak
+ echo "CPPFLAGS=-DTARGET_PHYS_ADDR_BITS=$hwlib" >> $d/config.mak
+done
projects / qemu.git / blobdiff