i386:i386 | i386:x86_64 | i386:x32 | \
x86_64:i386 | x86_64:x86_64 | x86_64:x32 | \
mips:mips | mipsel:mips | \
- ppc:ppc | ppc64:ppc | ppc:ppc64 | ppc64:ppc64 | \
+ ppc:ppc | ppc64:ppc | ppc:ppc64 | ppc64:ppc64 | ppc64:ppc64le | \
s390x:s390x)
return 0
;;
# default parameters
source_path=$(dirname "$0")
+# make source path absolute
+source_path=$(cd "$source_path"; pwd)
cpu=""
iasl="iasl"
interp_prefix="/usr/gnemul/qemu-%M"
# Don't accept a target_list environment variable.
unset target_list
+unset target_list_exclude
# Default value for a variable defining feature "foo".
# * foo="no" feature will only be used if --enable-foo arg is given
glusterfs_discard="no"
glusterfs_fallocate="no"
glusterfs_zerofill="no"
+glusterfs_ftruncate_has_stat="no"
+glusterfs_iocb_has_stat="no"
gtk=""
gtk_gl="no"
tls_priority="NORMAL"
cross_cc_cflags_armeb="-mbig-endian"
cross_cc_i386="i386-pc-linux-gnu-gcc"
cross_cc_cflags_i386=""
-cross_cc_powerpc="powerpc-linux-gnu-gcc"
-cross_cc_powerpc="powerpc-linux-gnu-gcc"
+cross_cc_ppc="powerpc-linux-gnu-gcc"
+cross_cc_cflags_ppc="-m32"
+cross_cc_ppc64="powerpc-linux-gnu-gcc"
+cross_cc_cflags_ppc64="-m64"
+cross_cc_ppc64le="powerpc64le-linux-gnu-gcc"
enabled_cross_compilers=""
;;
--cxx=*) CXX="$optarg"
;;
- --source-path=*) source_path="$optarg"
- ;;
--cpu=*) cpu="$optarg"
;;
--extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg"
LDFLAGS="-g $LDFLAGS"
fi
-# make source path absolute
-source_path=$(cd "$source_path"; pwd)
-
# running configure in the source tree?
# we know that's the case if configure is there.
if test -f "./configure"; then
fi
elif check_define _ARCH_PPC ; then
if check_define _ARCH_PPC64 ; then
- cpu="ppc64"
+ if check_define _LITTLE_ENDIAN ; then
+ cpu="ppc64le"
+ else
+ cpu="ppc64"
+ fi
else
cpu="ppc"
fi
# Note that this case should only have supported host CPUs, not guests.
case "$cpu" in
ppc|ppc64|s390|s390x|sparc64|x32|riscv32|riscv64)
- cpu="$cpu"
supported_cpu="yes"
eval "cross_cc_${cpu}=\$host_cc"
;;
+ ppc64le)
+ ARCH="ppc64"
+ supported_cpu="yes"
+ cross_cc_ppc64le=$host_cc
+ ;;
i386|i486|i586|i686|i86pc|BePC)
cpu="i386"
supported_cpu="yes"
: ${make=${MAKE-make}}
: ${install=${INSTALL-install}}
-: ${python=${PYTHON-python}}
+# We prefer python 3.x. A bare 'python' is traditionally
+# python 2.x, but some distros have it as python 3.x, so
+# we check that before python2
+python=
+for binary in "${PYTHON-python3}" python python2
+do
+ if has "$binary"
+ then
+ python="$binary"
+ break
+ fi
+done
: ${smbd=${SMBD-/usr/sbin/smbd}}
# Default objcc to clang if available, otherwise use CC
;;
--interp-prefix=*) interp_prefix="$optarg"
;;
- --source-path=*)
- ;;
--cross-prefix=*)
;;
--cc=*)
--cpu=*)
;;
--target-list=*) target_list="$optarg"
+ if test "$target_list_exclude"; then
+ error_exit "Can't mix --target-list with --target-list-exclude"
+ fi
+ ;;
+ --target-list-exclude=*) target_list_exclude="$optarg"
+ if test "$target_list"; then
+ error_exit "Can't mix --target-list-exclude with --target-list"
+ fi
;;
--enable-trace-backends=*) trace_backends="$optarg"
;;
;;
--enable-curses) curses="yes"
;;
+ --disable-iconv) iconv="no"
+ ;;
+ --enable-iconv) iconv="yes"
+ ;;
--disable-curl) curl="no"
;;
--enable-curl) curl="yes"
ppc)
CPU_CFLAGS="-m32"
LDFLAGS="-m32 $LDFLAGS"
- cross_cc_powerpc=$cc
- cross_cc_cflags_powerpc=$CPU_CFLAGS
+ cross_cc_ppc=$cc
+ cross_cc_cflags_ppc="$CPU_CFLAGS"
;;
ppc64)
CPU_CFLAGS="-m64"
LDFLAGS="-m64 $LDFLAGS"
cross_cc_ppc64=$cc
- cross_cc_cflags_ppc64=$CPU_CFLAGS
+ cross_cc_cflags_ppc64="$CPU_CFLAGS"
;;
sparc)
CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc"
LDFLAGS="-m32 -mv8plus $LDFLAGS"
cross_cc_sparc=$cc
- cross_cc_cflags_sparc=$CPU_CFLAGS
+ cross_cc_cflags_sparc="$CPU_CFLAGS"
;;
sparc64)
CPU_CFLAGS="-m64 -mcpu=ultrasparc"
LDFLAGS="-m64 $LDFLAGS"
cross_cc_sparc64=$cc
- cross_cc_cflags_sparc64=$CPU_CFLAGS
+ cross_cc_cflags_sparc64="$CPU_CFLAGS"
;;
s390)
CPU_CFLAGS="-m31"
LDFLAGS="-m31 $LDFLAGS"
cross_cc_s390=$cc
- cross_cc_cflags_s390=$CPU_CFLAGS
+ cross_cc_cflags_s390="$CPU_CFLAGS"
;;
s390x)
CPU_CFLAGS="-m64"
LDFLAGS="-m64 $LDFLAGS"
cross_cc_s390x=$cc
- cross_cc_cflags_s390x=$CPU_CFLAGS
+ cross_cc_cflags_s390x="$CPU_CFLAGS"
;;
i386)
CPU_CFLAGS="-m32"
LDFLAGS="-m32 $LDFLAGS"
cross_cc_i386=$cc
- cross_cc_cflags_i386=$CPU_CFLAGS
+ cross_cc_cflags_i386="$CPU_CFLAGS"
;;
x86_64)
# ??? Only extremely old AMD cpus do not have cmpxchg16b.
CPU_CFLAGS="-m64 -mcx16"
LDFLAGS="-m64 $LDFLAGS"
cross_cc_x86_64=$cc
- cross_cc_cflags_x86_64=$CPU_CFLAGS
+ cross_cc_cflags_x86_64="$CPU_CFLAGS"
;;
x32)
CPU_CFLAGS="-mx32"
LDFLAGS="-mx32 $LDFLAGS"
cross_cc_i386=$cc
- cross_cc_cflags_i386=$CPU_CFLAGS
+ cross_cc_cflags_i386="$CPU_CFLAGS"
;;
# No special flags required for other host CPUs
esac
mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
fi
-for config in $mak_wilds; do
- default_target_list="${default_target_list} $(basename "$config" .mak)"
-done
+if test -z "$target_list_exclude"; then
+ for config in $mak_wilds; do
+ default_target_list="${default_target_list} $(basename "$config" .mak)"
+ done
+else
+ exclude_list=$(echo "$target_list_exclude" | sed -e 's/,/ /g')
+ for config in $mak_wilds; do
+ target="$(basename "$config" .mak)"
+ exclude="no"
+ for excl in $exclude_list; do
+ if test "$excl" = "$target"; then
+ exclude="yes"
+ break;
+ fi
+ done
+ if test "$exclude" = "no"; then
+ default_target_list="${default_target_list} $target"
+ fi
+ done
+fi
# Enumerate public trace backends for --help output
trace_backend_list=$(echo $(grep -le '^PUBLIC = True$' "$source_path"/scripts/tracetool/backend/*.py | sed -e 's/^.*\/\(.*\)\.py$/\1/'))
--target-list=LIST set target list (default: build everything)
$(echo Available targets: $default_target_list | \
fold -s -w 53 | sed -e 's/^/ /')
+ --target-list-exclude=LIST exclude a set of targets from the default target-list
Advanced options (experts only):
- --source-path=PATH path of source code [$source_path]
--cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]
--cc=CC use C compiler CC [$cc]
--iasl=IASL use ACPI compiler IASL [$iasl]
gcrypt libgcrypt cryptography support
auth-pam PAM access control
sdl SDL UI
- sdl_image SDL Image support for icons
+ sdl-image SDL Image support for icons
gtk gtk UI
vte vte support for the gtk UI
curses curses UI
+ iconv font glyph conversion support
vnc VNC UI support
vnc-sasl SASL encryption for VNC server
vnc-jpeg JPEG lossy compression for VNC server
exit 0
fi
-if ! has $python; then
- error_exit "Python not found. Use --python=/path/to/python"
+# Remove old dependency files to make sure that they get properly regenerated
+rm -f */config-devices.mak.d
+
+if test -z "$python"
+then
+ error_exit "Python not found. Use --python=/path/to/python"
fi
# Note that if the Python conditional here evaluates True we will exit
# Consult white-list to determine whether to enable werror
# by default. Only enable by default for git builds
if test -z "$werror" ; then
- if test -d "$source_path/.git" && \
+ if test -e "$source_path/.git" && \
{ test "$linux" = "yes" || test "$mingw32" = "yes"; }; then
werror="yes"
else
gcc_flags="-Wno-missing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
gcc_flags="-Wendif-labels -Wno-shift-negative-value $gcc_flags"
gcc_flags="-Wno-initializer-overrides -Wexpansion-to-defined $gcc_flags"
-gcc_flags="-Wno-string-plus-int $gcc_flags"
+gcc_flags="-Wno-string-plus-int -Wno-typedef-redefinition $gcc_flags"
# Note that we do not add -Werror to gcc_flags here, because that would
# enable it for all configure tests. If a configure test failed due
# to -Werror this would just silently disable some features,
##########################################
# libseccomp check
-libseccomp_minver="2.2.0"
if test "$seccomp" != "no" ; then
- case "$cpu" in
- i386|x86_64|mips)
- ;;
- arm|aarch64)
- libseccomp_minver="2.2.3"
- ;;
- ppc|ppc64|s390x)
- libseccomp_minver="2.3.0"
- ;;
- *)
- libseccomp_minver=""
- ;;
- esac
-
- if test "$libseccomp_minver" != "" &&
- $pkg_config --atleast-version=$libseccomp_minver libseccomp ; then
+ libseccomp_minver="2.3.0"
+ if $pkg_config --atleast-version=$libseccomp_minver libseccomp ; then
seccomp_cflags="$($pkg_config --cflags libseccomp)"
seccomp_libs="$($pkg_config --libs libseccomp)"
seccomp="yes"
else
if test "$seccomp" = "yes" ; then
- if test "$libseccomp_minver" != "" ; then
- feature_not_found "libseccomp" \
- "Install libseccomp devel >= $libseccomp_minver"
- else
- feature_not_found "libseccomp" \
- "libseccomp is not supported for host cpu $cpu"
- fi
+ feature_not_found "libseccomp" \
+ "Install libseccomp devel >= $libseccomp_minver"
fi
seccomp="no"
fi
# GNUTLS probe
if test "$gnutls" != "no"; then
+ pass="no"
if $pkg_config --exists "gnutls >= 3.1.18"; then
gnutls_cflags=$($pkg_config --cflags gnutls)
gnutls_libs=$($pkg_config --libs gnutls)
- libs_softmmu="$gnutls_libs $libs_softmmu"
- libs_tools="$gnutls_libs $libs_tools"
- QEMU_CFLAGS="$QEMU_CFLAGS $gnutls_cflags"
- gnutls="yes"
- elif test "$gnutls" = "yes"; then
+ # Packaging for the static libraries is not always correct.
+ # At least ubuntu 18.04 ships only shared libraries.
+ write_c_skeleton
+ if compile_prog "" "$gnutls_libs" ; then
+ LIBS="$gnutls_libs $LIBS"
+ QEMU_CFLAGS="$QEMU_CFLAGS $gnutls_cflags"
+ pass="yes"
+ fi
+ fi
+ if test "$pass" = "no" && test "$gnutls" = "yes"; then
feature_not_found "gnutls" "Install gnutls devel >= 3.1.18"
else
- gnutls="no"
+ gnutls="$pass"
fi
fi
if test "$nettle" != "no"; then
+ pass="no"
if $pkg_config --exists "nettle >= 2.7.1"; then
nettle_cflags=$($pkg_config --cflags nettle)
nettle_libs=$($pkg_config --libs nettle)
nettle_version=$($pkg_config --modversion nettle)
- libs_softmmu="$nettle_libs $libs_softmmu"
- libs_tools="$nettle_libs $libs_tools"
- QEMU_CFLAGS="$QEMU_CFLAGS $nettle_cflags"
- nettle="yes"
-
- if test -z "$gcrypt"; then
- gcrypt="no"
+ # Link test to make sure the given libraries work (e.g for static).
+ write_c_skeleton
+ if compile_prog "" "$nettle_libs" ; then
+ LIBS="$nettle_libs $LIBS"
+ QEMU_CFLAGS="$QEMU_CFLAGS $nettle_cflags"
+ if test -z "$gcrypt"; then
+ gcrypt="no"
+ fi
+ pass="yes"
fi
+ fi
+ if test "$pass" = "no" && test "$nettle" = "yes"; then
+ feature_not_found "nettle" "Install nettle devel >= 2.7.1"
else
- if test "$nettle" = "yes"; then
- feature_not_found "nettle" "Install nettle devel >= 2.7.1"
- else
- nettle="no"
- fi
+ nettle="$pass"
fi
fi
if test "$gcrypt" != "no"; then
+ pass="no"
if has_libgcrypt; then
gcrypt_cflags=$(libgcrypt-config --cflags)
gcrypt_libs=$(libgcrypt-config --libs)
- # Debian has remove -lgpg-error from libgcrypt-config
+ # Debian has removed -lgpg-error from libgcrypt-config
# as it "spreads unnecessary dependencies" which in
# turn breaks static builds...
if test "$static" = "yes"
then
gcrypt_libs="$gcrypt_libs -lgpg-error"
fi
- libs_softmmu="$gcrypt_libs $libs_softmmu"
- libs_tools="$gcrypt_libs $libs_tools"
- QEMU_CFLAGS="$QEMU_CFLAGS $gcrypt_cflags"
- gcrypt="yes"
+ # Link test to make sure the given libraries work (e.g for static).
+ write_c_skeleton
+ if compile_prog "" "$gcrypt_libs" ; then
+ LIBS="$gcrypt_libs $LIBS"
+ QEMU_CFLAGS="$QEMU_CFLAGS $gcrypt_cflags"
+ pass="yes"
+ fi
+ fi
+ if test "$pass" = "yes"; then
+ gcrypt="yes"
cat > $TMPC << EOF
#include <gcrypt.h>
int main(void) {
if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
gcrypt_hmac=yes
fi
+ elif test "$gcrypt" = "yes"; then
+ feature_not_found "gcrypt" "Install gcrypt devel >= 1.5.0"
else
- if test "$gcrypt" = "yes"; then
- feature_not_found "gcrypt" "Install gcrypt devel >= 1.5.0"
- else
- gcrypt="no"
- fi
+ gcrypt="no"
fi
fi
int main(void) {
const char *service_name = "qemu";
const char *user = "frank";
- const struct pam_conv *pam_conv = NULL;
+ const struct pam_conv pam_conv = { 0 };
pam_handle_t *pamh = NULL;
- pam_start(service_name, user, pam_conv, &pamh);
+ pam_start(service_name, user, &pam_conv, &pamh);
return 0;
}
EOF
fi
fi
+##########################################
+# iconv probe
+if test "$iconv" != "no" ; then
+ cat > $TMPC << EOF
+#include <iconv.h>
+int main(void) {
+ iconv_t conv = iconv_open("WCHAR_T", "UCS-2");
+ return conv != (iconv_t) -1;
+}
+EOF
+ iconv_prefix_list="/usr/local:/usr"
+ iconv_lib_list=":-liconv"
+ IFS=:
+ for iconv_prefix in $iconv_prefix_list; do
+ IFS=:
+ iconv_cflags="-I$iconv_prefix/include"
+ iconv_ldflags="-L$iconv_prefix/lib"
+ for iconv_link in $iconv_lib_list; do
+ unset IFS
+ iconv_lib="$iconv_ldflags $iconv_link"
+ echo "looking at iconv in '$iconv_cflags' '$iconv_lib'" >> config.log
+ if compile_prog "$iconv_cflags" "$iconv_lib" ; then
+ iconv_found=yes
+ break
+ fi
+ done
+ if test "$iconv_found" = yes ; then
+ break
+ fi
+ done
+ if test "$iconv_found" = "yes" ; then
+ iconv=yes
+ else
+ if test "$iconv" = "yes" ; then
+ feature_not_found "iconv" "Install iconv devel"
+ fi
+ iconv=no
+ fi
+fi
+
##########################################
# curses probe
+if test "$iconv" = "no" ; then
+ # curses will need iconv
+ curses=no
+fi
if test "$curses" != "no" ; then
if test "$mingw32" = "yes" ; then
curses_inc_list="$($pkg_config --cflags ncurses 2>/dev/null):"
#include <locale.h>
#include <curses.h>
#include <wchar.h>
+#include <langinfo.h>
int main(void) {
+ const char *codeset;
wchar_t wch = L'w';
setlocale(LC_ALL, "");
resize_term(0, 0);
addwstr(L"wide chars\n");
addnwstr(&wch, 1);
add_wch(WACS_DEGREE);
- return 0;
+ codeset = nl_langinfo(CODESET);
+ return codeset != 0;
}
EOF
IFS=:
##########################################
# opengl probe (for sdl2, gtk, milkymist-tmu2)
+gbm="no"
+if $pkg_config gbm; then
+ gbm_cflags="$($pkg_config --cflags gbm)"
+ gbm_libs="$($pkg_config --libs gbm)"
+ gbm="yes"
+fi
+
if test "$opengl" != "no" ; then
opengl_pkgs="epoxy gbm"
if $pkg_config $opengl_pkgs; then
glusterfs_fallocate="yes"
glusterfs_zerofill="yes"
fi
+ cat > $TMPC << EOF
+#include <glusterfs/api/glfs.h>
+
+int
+main(void)
+{
+ /* new glfs_ftruncate() passes two additional args */
+ return glfs_ftruncate(NULL, 0, NULL, NULL);
+}
+EOF
+ if compile_prog "$glusterfs_cflags" "$glusterfs_libs" ; then
+ glusterfs_ftruncate_has_stat="yes"
+ fi
+ cat > $TMPC << EOF
+#include <glusterfs/api/glfs.h>
+
+/* new glfs_io_cbk() passes two additional glfs_stat structs */
+static void
+glusterfs_iocb(glfs_fd_t *fd, ssize_t ret, struct glfs_stat *prestat, struct glfs_stat *poststat, void *data)
+{}
+
+int
+main(void)
+{
+ glfs_io_cbk iocb = &glusterfs_iocb;
+ iocb(NULL, 0 , NULL, NULL, NULL);
+ return 0;
+}
+EOF
+ if compile_prog "$glusterfs_cflags" "$glusterfs_libs" ; then
+ glusterfs_iocb_has_stat="yes"
+ fi
else
if test "$glusterfs" = "yes" ; then
feature_not_found "GlusterFS backend support" \
EOF
if compile_prog "" "" ; then
guest_agent_ntddscsi=yes
- libs_qga="-lsetupapi $libs_qga"
+ libs_qga="-lsetupapi -lcfgmgr32 $libs_qga"
fi
fi
have_utmpx=yes
fi
+##########################################
+# check for getrandom()
+
+have_getrandom=no
+cat > $TMPC << EOF
+#include <sys/random.h>
+int main(void) {
+ return getrandom(0, 0, GRND_NONBLOCK);
+}
+EOF
+if compile_prog "" "" ; then
+ have_getrandom=yes
+fi
+
##########################################
# checks for sanitizers
done
fi
+# Disable OpenBSD W^X if available
+if test "$tcg" = "yes" && test "$targetos" = "OpenBSD"; then
+ cat > $TMPC <<EOF
+ int main(void) { return 0; }
+EOF
+ wx_ldflags="-Wl,-z,wxneeded"
+ if compile_prog "" "$wx_ldflags"; then
+ QEMU_LDFLAGS="$QEMU_LDFLAGS $wx_ldflags"
+ fi
+fi
+
qemu_confdir=$sysconfdir$confsuffix
qemu_moddir=$libdir$confsuffix
qemu_datadir=$datadir$confsuffix
# Probe for guest agent support/options
if [ "$guest_agent" != "no" ]; then
- if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
+ if [ "$softmmu" = no -a "$want_tools" = no ] ; then
+ guest_agent=no
+ elif [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
tools="qemu-ga $tools"
guest_agent=yes
elif [ "$guest_agent" != yes ]; then
fi
done
fi
-if test "$cpu" = "ppc64" && test "$targetos" != "Darwin" ; then
+if test "$ARCH" = "ppc64" && test "$targetos" != "Darwin" ; then
roms="$roms spapr-rtas"
fi
echo "nettle $nettle $(echo_version $nettle $nettle_version)"
echo "libtasn1 $tasn1"
echo "PAM $auth_pam"
+echo "iconv support $iconv"
echo "curses support $curses"
echo "virgl support $virglrenderer $(echo_version $virglrenderer $virgl_version)"
echo "curl support $curl"
echo "gcov enabled $gcov"
echo "TPM support $tpm"
echo "libssh2 support $libssh2"
-echo "TPM passthrough $tpm_passthrough"
-echo "TPM emulator $tpm_emulator"
echo "QOM debugging $qom_cast_debug"
echo "Live block migration $live_block_migration"
echo "lzo support $lzo"
if test "$cocoa" = "yes" ; then
echo "CONFIG_COCOA=y" >> $config_host_mak
fi
+if test "$iconv" = "yes" ; then
+ echo "CONFIG_ICONV=y" >> $config_host_mak
+ echo "ICONV_CFLAGS=$iconv_cflags" >> $config_host_mak
+ echo "ICONV_LIBS=$iconv_lib" >> $config_host_mak
+fi
if test "$curses" = "yes" ; then
echo "CONFIG_CURSES=m" >> $config_host_mak
echo "CURSES_CFLAGS=$curses_inc" >> $config_host_mak
fi
fi
+if test "$gbm" = "yes" ; then
+ echo "CONFIG_GBM=y" >> $config_host_mak
+ echo "GBM_LIBS=$gbm_libs" >> $config_host_mak
+ echo "GBM_CFLAGS=$gbm_cflags" >> $config_host_mak
+fi
+
+
if test "$malloc_trim" = "yes" ; then
echo "CONFIG_MALLOC_TRIM=y" >> $config_host_mak
fi
echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
fi
+if test "$glusterfs_ftruncate_has_stat" = "yes" ; then
+ echo "CONFIG_GLUSTERFS_FTRUNCATE_HAS_STAT=y" >> $config_host_mak
+fi
+
+if test "$glusterfs_iocb_has_stat" = "yes" ; then
+ echo "CONFIG_GLUSTERFS_IOCB_HAS_STAT=y" >> $config_host_mak
+fi
+
if test "$libssh2" = "yes" ; then
echo "CONFIG_LIBSSH2=m" >> $config_host_mak
echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
if test "$tpm" = "yes"; then
echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
- # TPM passthrough support?
- if test "$tpm_passthrough" = "yes"; then
- echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
- fi
- # TPM emulator support?
- if test "$tpm_emulator" = "yes"; then
- echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak
- fi
fi
echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
if test "$have_utmpx" = "yes" ; then
echo "HAVE_UTMPX=y" >> $config_host_mak
fi
-
+if test "$have_getrandom" = "yes" ; then
+ echo "CONFIG_GETRANDOM=y" >> $config_host_mak
+fi
if test "$ivshmem" = "yes" ; then
echo "CONFIG_IVSHMEM=y" >> $config_host_mak
fi
i386|x86_64|x32)
linux_arch=x86
;;
- ppc|ppc64)
+ ppc|ppc64|ppc64le)
linux_arch=powerpc
;;
s390x)
;;
ppc)
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
- target_compiler=$cross_cc_powerpc
+ target_compiler=$cross_cc_ppc
+ target_compiler_cflags="$cross_cc_cflags_ppc"
;;
ppc64)
TARGET_BASE_ARCH=ppc
mttcg=yes
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
target_compiler=$cross_cc_ppc64
+ target_compiler_cflags="$cross_cc_cflags_ppc64"
;;
ppc64le)
TARGET_ARCH=ppc64
TARGET_BASE_ARCH=riscv
TARGET_ABI_DIR=riscv
mttcg=yes
+ gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml"
target_compiler=$cross_cc_riscv32
;;
riscv64)
TARGET_BASE_ARCH=riscv
TARGET_ABI_DIR=riscv
mttcg=yes
+ gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml"
target_compiler=$cross_cc_riscv64
;;
sh4|sh4eb)
done # for target in $targets
+echo "PIXMAN_CFLAGS=$pixman_cflags" >> $config_host_mak
+echo "PIXMAN_LIBS=$pixman_libs" >> $config_host_mak
+
if test -n "$enabled_cross_compilers"; then
echo
echo "NOTE: cross-compilers enabled: $enabled_cross_compilers"
for bios_file in \
$source_path/pc-bios/*.bin \
$source_path/pc-bios/*.lid \
- $source_path/pc-bios/*.aml \
$source_path/pc-bios/*.rom \
$source_path/pc-bios/*.dtb \
$source_path/pc-bios/*.img \
$source_path/pc-bios/openbios-* \
$source_path/pc-bios/u-boot.* \
+ $source_path/pc-bios/edk2-*.fd.bz2 \
$source_path/pc-bios/palcode-*
do
LINKS="$LINKS pc-bios/$(basename $bios_file)"
projects / qemu.git / blobdiff