@end example
ETEXI
-DEF("balloon", HAS_ARG, QEMU_OPTION_balloon,
- "-balloon virtio[,addr=str]\n"
- " enable virtio balloon device (deprecated)\n", QEMU_ARCH_ALL)
-STEXI
-@item -balloon virtio[,addr=@var{addr}]
-@findex -balloon
-Enable virtio balloon device, optionally with PCI address @var{addr}. This
-option is deprecated, use @option{-device virtio-balloon} instead.
-ETEXI
-
DEF("device", HAS_ARG, QEMU_OPTION_device,
"-device driver[,prop[=value][,...]]\n"
" add device (based on driver)\n"
@item cache-size
The maximum total size of the L2 table and refcount block caches in bytes
-(default: 1048576 bytes or 8 clusters, whichever is larger)
+(default: the sum of l2-cache-size and refcount-cache-size)
@item l2-cache-size
The maximum size of the L2 table cache in bytes
-(default: 4/5 of the total cache size)
+(default: if cache-size is not specified - 32M on Linux platforms, and 8M on
+non-Linux platforms; otherwise, as large as possible within the cache-size,
+while permitting the requested or the minimal refcount cache size)
@item refcount-cache-size
The maximum size of the refcount block cache in bytes
-(default: 1/5 of the total cache size)
+(default: 4 times the cluster size; or if cache-size is specified, the part of
+it which is not used for the L2 cache)
@item cache-clean-interval
Clean unused entries in the L2 and refcount caches. The interval is in seconds.
-The default value is 0 and it disables this feature.
+The default value is 600 on supporting platforms, and 0 on other platforms.
+Setting it to 0 disables this feature.
@item pass-discard-request
Whether discard requests to the qcow2 device should be forwarded to the data
slows down the IDE transfers).
ETEXI
-HXCOMM Deprecated by -rtc
-DEF("rtc-td-hack", 0, QEMU_OPTION_rtc_td_hack, "", QEMU_ARCH_I386)
-
DEF("no-fd-bootchk", 0, QEMU_OPTION_no_fd_bootchk,
"-no-fd-bootchk disable boot signature checking for floppy disks\n",
QEMU_ARCH_I386)
@table @option
ETEXI
-HXCOMM Legacy slirp options (now moved to -net user):
-#ifdef CONFIG_SLIRP
-DEF("tftp", HAS_ARG, QEMU_OPTION_tftp, "", QEMU_ARCH_ALL)
-DEF("bootp", HAS_ARG, QEMU_OPTION_bootp, "", QEMU_ARCH_ALL)
-DEF("redir", HAS_ARG, QEMU_OPTION_redir, "", QEMU_ARCH_ALL)
-#ifndef _WIN32
-DEF("smb", HAS_ARG, QEMU_OPTION_smb, "", QEMU_ARCH_ALL)
-#endif
-#endif
-
DEF("netdev", HAS_ARG, QEMU_OPTION_netdev,
#ifdef CONFIG_SLIRP
"-netdev user,id=str[,ipv4[=on|off]][,net=addr[/mask]][,host=addr]\n"
@end table
-Note: Legacy stand-alone options -tftp, -bootp, -smb and -redir are still
-processed and applied to -net user. Mixing them with the new configuration
-syntax gives undefined results. Their use for new applications is discouraged
-as they will be removed from future versions.
-
@item -netdev tap,id=@var{id}[,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,br=@var{bridge}][,helper=@var{helper}]
Configure a host TAP network backend with ID @var{id}.
HXCOMM Silently ignored for compatibility
DEF("clock", HAS_ARG, QEMU_OPTION_clock, "", QEMU_ARCH_ALL)
-HXCOMM Options deprecated by -rtc
-DEF("localtime", 0, QEMU_OPTION_localtime, "", QEMU_ARCH_ALL)
-DEF("startdate", HAS_ARG, QEMU_OPTION_startdate, "", QEMU_ARCH_ALL)
-
DEF("rtc", HAS_ARG, QEMU_OPTION_rtc, \
- "-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]\n" \
+ "-rtc [base=utc|localtime|<datetime>][,clock=host|rt|vm][,driftfix=none|slew]\n" \
" set the RTC base and clock, enable drift fix for clock ticks (x86 only)\n",
QEMU_ARCH_ALL)
STEXI
-@item -rtc [base=utc|localtime|@var{date}][,clock=host|vm][,driftfix=none|slew]
+@item -rtc [base=utc|localtime|@var{datetime}][,clock=host|rt|vm][,driftfix=none|slew]
@findex -rtc
Specify @option{base} as @code{utc} or @code{localtime} to let the RTC start at the current
UTC or local time, respectively. @code{localtime} is required for correct date in
-MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the
+MS-DOS or Windows. To start at a specific point in time, provide @var{datetime} in the
format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC.
By default the RTC is driven by the host system time. This allows using of the
RTC as accurate reference clock inside the guest, specifically if the host
time is smoothly following an accurate external reference clock, e.g. via NTP.
If you want to isolate the guest time from the host, you can set @option{clock}
-to @code{rt} instead. To even prevent it from progressing during suspension,
-you can set it to @code{vm}.
+to @code{rt} instead, which provides a host monotonic clock if host support it.
+To even prevent the RTC from progressing during suspension, you can set @option{clock}
+to @code{vm} (virtual clock). @samp{clock=vm} is recommended especially in
+icount mode in order to preserve determinism; however, note that in icount mode
+the speed of the virtual clock is variable and can in general differ from the
+host clock.
Enable @option{driftfix} (i386 targets only) if you experience time drift problems,
specifically with Windows' ACPI HAL. This option will try to figure out how
command line and device configuration into file or dash @code{-}) character to print the
output to stdout. This can be later used as input file for @code{-readconfig} option.
ETEXI
-HXCOMM Deprecated, same as -no-user-config
-DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig, "", QEMU_ARCH_ALL)
+
DEF("no-user-config", 0, QEMU_OPTION_nouserconfig,
"-no-user-config\n"
" do not load default user-provided config files at startup\n",
The @code{-no-user-config} option makes QEMU not load any of the user-provided
config files on @var{sysconfdir}.
ETEXI
+
DEF("trace", HAS_ARG, QEMU_OPTION_trace,
"-trace [[enable=]<pattern>][,events=<file>][,file=<file>]\n"
" specify tracing options\n",
projects / qemu.git / blobdiff