# Since: 1.3
#
##
-
{ 'struct': 'SnapshotInfo',
'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int',
'date-sec': 'int', 'date-nsec': 'int',
#
# Since: 1.7
##
-
{ 'union': 'ImageInfoSpecific',
'data': {
'qcow2': 'ImageInfoSpecificQCow2',
# Since: 1.3
#
##
-
{ 'struct': 'ImageInfo',
'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool',
'*actual-size': 'int', 'virtual-size': 'int',
# Since: 1.4
#
##
-
{ 'struct': 'ImageCheck',
'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int',
'*image-end-offset': 'int', '*corruptions': 'int', '*leaks': 'int',
# 2.3: 'host_floppy' deprecated
# 2.5: 'host_floppy' dropped
# 2.6: 'luks' added
+# 2.8: 'replication' added
#
# @backing_file: #optional the name of the backing file (for copy-on-write)
#
#
# Since: 2.5
##
-
{ 'struct': 'BlockDeviceTimedStats',
'data': { 'interval_length': 'int', 'min_rd_latency_ns': 'int',
'max_rd_latency_ns': 'int', 'avg_rd_latency_ns': 'int',
# @job-id: #optional identifier for the newly-created block job. If
# omitted, the device name will be used. (Since 2.7)
#
-# @device: the name of the device which should be copied.
+# @device: the device name or node-name of a root node which should be copied.
#
# @target: the target of the new image. If the file exists, or if it
# is a device, the existing file/device will be used as the new
# Must be present if sync is "incremental", must NOT be present
# otherwise. (Since 2.4)
#
+# @compress: #optional true to compress data, if the target format supports it.
+# (default: false) (since 2.8)
+#
# @on-source-error: #optional the action to take on an error on the source,
# default 'report'. 'stop' and 'enospc' can only be used
# if the block device supports io-status (see BlockInfo).
{ 'struct': 'DriveBackup',
'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
'*format': 'str', 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
- '*speed': 'int', '*bitmap': 'str',
+ '*speed': 'int', '*bitmap': 'str', '*compress': 'bool',
'*on-source-error': 'BlockdevOnError',
'*on-target-error': 'BlockdevOnError' } }
# @job-id: #optional identifier for the newly-created block job. If
# omitted, the device name will be used. (Since 2.7)
#
-# @device: the name of the device which should be copied.
+# @device: the device name or node-name of a root node which should be copied.
#
-# @target: the name of the backup target device.
+# @target: the device name or node-name of the backup target node.
#
# @sync: what parts of the disk image should be copied to the destination
# (all the disk, only the sectors allocated in the topmost image, or
# @speed: #optional the maximum speed, in bytes per second. The default is 0,
# for unlimited.
#
+# @compress: #optional true to compress data, if the target format supports it.
+# (default: false) (since 2.8)
+#
# @on-source-error: #optional the action to take on an error on the source,
# default 'report'. 'stop' and 'enospc' can only be used
# if the block device supports io-status (see BlockInfo).
'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
'sync': 'MirrorSyncMode',
'*speed': 'int',
+ '*compress': 'bool',
'*on-source-error': 'BlockdevOnError',
'*on-target-error': 'BlockdevOnError' } }
# @image-node-name: The name of the block driver state node of the
# image to modify.
#
-# @device: The name of the device that owns image-node-name.
+# @device: The device name or node-name of the root node that owns
+# image-node-name.
#
# @backing-file: The string to write as the backing file. This
# string is not validated, so care should be taken
# @job-id: #optional identifier for the newly-created block job. If
# omitted, the device name will be used. (Since 2.7)
#
-# @device: the name of the device
+# @device: the device name or node-name of a root node
#
# @base: #optional The file name of the backing image to write data into.
# If not specified, this is the deepest backing image
# For the arguments, see the documentation of DriveBackup.
#
# Returns: nothing on success
-# If @device is not a valid block device, DeviceNotFound
+# If @device is not a valid block device, GenericError
#
# Since 1.6
##
-{ 'command': 'drive-backup', 'data': 'DriveBackup' }
+{ 'command': 'drive-backup', 'boxed': true,
+ 'data': 'DriveBackup' }
##
# @blockdev-backup
#
# For the arguments, see the documentation of BlockdevBackup.
#
+# Returns: nothing on success
+# If @device is not a valid block device, DeviceNotFound
+#
# Since 2.3
##
-{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' }
+{ 'command': 'blockdev-backup', 'boxed': true,
+ 'data': 'BlockdevBackup' }
##
# See DriveMirror for parameter descriptions
#
# Returns: nothing on success
-# If @device is not a valid block device, DeviceNotFound
+# If @device is not a valid block device, GenericError
#
# Since 1.3
##
# @job-id: #optional identifier for the newly-created block job. If
# omitted, the device name will be used. (Since 2.7)
#
-# @device: the name of the device whose writes should be mirrored.
+# @device: the device name or node-name of a root node whose writes should be
+# mirrored.
#
# @target: the target of the new image. If the file exists, or if it
# is a device, the existing file/device will be used as the new
# @job-id: #optional identifier for the newly-created block job. If
# omitted, the device name will be used. (Since 2.7)
#
-# @device: the name of the device whose writes should be mirrored.
+# @device: The device name or node-name of a root node whose writes should be
+# mirrored.
#
# @target: the id or node-name of the block device to mirror to. This mustn't be
# attached to guest.
#
# A set of parameters describing block throttling.
#
-# @device: The name of the device
+# @device: #optional Block device name (deprecated, use @id instead)
+#
+# @id: #optional The name or QOM path of the guest device (since: 2.8)
#
# @bps: total throughput limit in bytes per second
#
# Since: 1.1
##
{ 'struct': 'BlockIOThrottle',
- 'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
- 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
+ 'data': { '*device': 'str', '*id': 'str', 'bps': 'int', 'bps_rd': 'int',
+ 'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
'*bps_max': 'int', '*bps_rd_max': 'int',
'*bps_wr_max': 'int', '*iops_max': 'int',
'*iops_rd_max': 'int', '*iops_wr_max': 'int',
# @job-id: #optional identifier for the newly-created block job. If
# omitted, the device name will be used. (Since 2.7)
#
-# @device: the device name
+# @device: the device name or node-name of a root node
#
# @base: #optional the common backing file name
#
# 'stop' and 'enospc' can only be used if the block device
# supports io-status (see BlockInfo). Since 1.3.
#
-# Returns: Nothing on success
-# If @device does not exist, DeviceNotFound
-#
# Since: 1.1
##
{ 'command': 'block-stream',
'data': [ 'archipelago', 'blkdebug', 'blkverify', 'bochs', 'cloop',
'dmg', 'file', 'ftp', 'ftps', 'gluster', 'host_cdrom',
'host_device', 'http', 'https', 'luks', 'null-aio', 'null-co',
- 'parallels', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'tftp',
- 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
+ 'parallels', 'qcow', 'qcow2', 'qed', 'quorum', 'raw',
+ 'replication', 'tftp', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
##
# @BlockdevOptionsFile
#
-# Driver specific block device options for the file backend and similar
-# protocols.
+# Driver specific block device options for the file backend.
#
# @filename: path to the image file
+# @aio: #optional AIO backend (default: threads) (since: 2.8)
#
# Since: 1.7
##
{ 'struct': 'BlockdevOptionsFile',
- 'data': { 'filename': 'str' } }
+ 'data': { 'filename': 'str',
+ '*aio': 'BlockdevAioOptions' } }
##
# @BlockdevOptionsNull
#
# @tcp: host address and port number
#
+# This is similar to SocketAddress, only distinction:
+#
+# 1. GlusterServer is a flat union, SocketAddress is a simple union.
+# A flat union is nicer than simple because it avoids nesting
+# (i.e. more {}) on the wire.
+#
+# 2. GlusterServer lacks case 'fd', since gluster doesn't let you
+# pass in a file descriptor.
+#
+# GlusterServer is actually not Gluster-specific, its a
+# compatibility evolved into an alternate for SocketAddress.
+#
# Since: 2.7
##
{ 'union': 'GlusterServer',
#
# @debug-level: #optional libgfapi log level (default '4' which is Error)
#
+# @logfile: #optional libgfapi log file (default /dev/stderr)
+#
# Since: 2.7
##
{ 'struct': 'BlockdevOptionsGluster',
'data': { 'volume': 'str',
'path': 'str',
'server': ['GlusterServer'],
- '*debug-level': 'int' } }
+ '*debug-level': 'int',
+ '*logfile': 'str' } }
+
+##
+# @ReplicationMode
+#
+# An enumeration of replication modes.
+#
+# @primary: Primary mode, the vm's state will be sent to secondary QEMU.
+#
+# @secondary: Secondary mode, receive the vm's state from primary QEMU.
+#
+# Since: 2.8
+##
+{ 'enum' : 'ReplicationMode', 'data' : [ 'primary', 'secondary' ] }
+
+##
+# @BlockdevOptionsReplication
+#
+# Driver specific block device options for replication
+#
+# @mode: the replication mode
+#
+# @top-id: #optional In secondary mode, node name or device ID of the root
+# node who owns the replication node chain. Must not be given in
+# primary mode.
+#
+# Since: 2.8
+##
+{ 'struct': 'BlockdevOptionsReplication',
+ 'base': 'BlockdevOptionsGenericFormat',
+ 'data': { 'mode': 'ReplicationMode',
+ '*top-id': 'str' } }
+
+##
+# @BlockdevOptionsCurl
+#
+# Driver specific block device options for the curl backend.
+#
+# @filename: path to the image file
+#
+# Since: 1.7
+##
+{ 'struct': 'BlockdevOptionsCurl',
+ 'data': { 'filename': 'str' } }
##
# @BlockdevOptions
# block devices, independent of the block driver:
#
# @driver: block driver name
-# @id: #optional id by which the new block device can be referred to.
-# This option is only allowed on the top level of blockdev-add.
-# A BlockBackend will be created by blockdev-add if and only if
-# this option is given.
-# @node-name: #optional the name of a block driver state node (Since 2.0).
-# This option is required on the top level of blockdev-add if
-# the @id option is not given there.
+# @node-name: #optional the node name of the new node (Since 2.0).
+# This option is required on the top level of blockdev-add.
# @discard: #optional discard-related options (default: ignore)
# @cache: #optional cache-related options
-# @aio: #optional AIO backend (default: threads)
# @read-only: #optional whether the block device should be read-only
# (default: false)
# @detect-zeroes: #optional detect and optimize zero writes (Since 2.1)
##
{ 'union': 'BlockdevOptions',
'base': { 'driver': 'BlockdevDriver',
-# TODO 'id' is a BB-level option, remove it
- '*id': 'str',
'*node-name': 'str',
'*discard': 'BlockdevDiscardOptions',
'*cache': 'BlockdevCacheOptions',
- '*aio': 'BlockdevAioOptions',
'*read-only': 'bool',
'*detect-zeroes': 'BlockdevDetectZeroesOptions' },
'discriminator': 'driver',
'cloop': 'BlockdevOptionsGenericFormat',
'dmg': 'BlockdevOptionsGenericFormat',
'file': 'BlockdevOptionsFile',
- 'ftp': 'BlockdevOptionsFile',
- 'ftps': 'BlockdevOptionsFile',
+ 'ftp': 'BlockdevOptionsCurl',
+ 'ftps': 'BlockdevOptionsCurl',
'gluster': 'BlockdevOptionsGluster',
'host_cdrom': 'BlockdevOptionsFile',
'host_device':'BlockdevOptionsFile',
- 'http': 'BlockdevOptionsFile',
- 'https': 'BlockdevOptionsFile',
+ 'http': 'BlockdevOptionsCurl',
+ 'https': 'BlockdevOptionsCurl',
# TODO iscsi: Wait for structured options
'luks': 'BlockdevOptionsLUKS',
# TODO nbd: Should take InetSocketAddress for 'host'?
'quorum': 'BlockdevOptionsQuorum',
'raw': 'BlockdevOptionsGenericFormat',
# TODO rbd: Wait for structured options
+ 'replication':'BlockdevOptionsReplication',
# TODO sheepdog: Wait for structured options
# TODO ssh: Should take InetSocketAddress for 'host'?
- 'tftp': 'BlockdevOptionsFile',
+ 'tftp': 'BlockdevOptionsCurl',
'vdi': 'BlockdevOptionsGenericFormat',
'vhdx': 'BlockdevOptionsGenericFormat',
'vmdk': 'BlockdevOptionsGenericCOWFormat',
# block drivers among other things. Stay away from it unless you want
# to help with its development.
#
-# @options: block device options for the new device
+# For the arguments, see the documentation of BlockdevOptions.
#
# Since: 1.7
##
-{ 'command': 'blockdev-add', 'data': { 'options': 'BlockdevOptions' } }
+{ 'command': 'blockdev-add', 'data': 'BlockdevOptions', 'boxed': true }
##
# @x-blockdev-del:
#
# Deletes a block device that has been added using blockdev-add.
-# The selected device can be either a block backend or a graph node.
-#
-# In the former case the backend will be destroyed, along with its
-# inserted medium if there's any. The command will fail if the backend
-# or its medium are in use.
-#
-# In the latter case the node will be destroyed. The command will fail
-# if the node is attached to a block backend or is otherwise being
-# used.
-#
-# One of @id or @node-name must be specified, but not both.
+# The command will fail if the node is attached to a device or is
+# otherwise being used.
#
# This command is still a work in progress and is considered
# experimental. Stay away from it unless you want to help with its
# development.
#
-# @id: #optional Name of the block backend device to delete.
-#
-# @node-name: #optional Name of the graph node to delete.
+# @node-name: Name of the graph node to delete.
#
# Since: 2.5
##
-{ 'command': 'x-blockdev-del', 'data': { '*id': 'str', '*node-name': 'str' } }
+{ 'command': 'x-blockdev-del', 'data': { 'node-name': 'str' } }
##
# @blockdev-open-tray:
# to it
# - if the guest device does not have an actual tray
#
-# @device: block device name
+# @device: #optional Block device name (deprecated, use @id instead)
+#
+# @id: #optional The name or QOM path of the guest device (since: 2.8)
#
# @force: #optional if false (the default), an eject request will be sent to
# the guest if it has locked the tray (and the tray will not be opened
# Since: 2.5
##
{ 'command': 'blockdev-open-tray',
- 'data': { 'device': 'str',
+ 'data': { '*device': 'str',
+ '*id': 'str',
'*force': 'bool' } }
##
#
# If the tray was already closed before, this will be a no-op.
#
-# @device: block device name
+# @device: #optional Block device name (deprecated, use @id instead)
+#
+# @id: #optional The name or QOM path of the guest device (since: 2.8)
#
# Since: 2.5
##
{ 'command': 'blockdev-close-tray',
- 'data': { 'device': 'str' } }
+ 'data': { '*device': 'str',
+ '*id': 'str' } }
##
# @x-blockdev-remove-medium:
# This command is still a work in progress and is considered experimental.
# Stay away from it unless you want to help with its development.
#
-# @device: block device name
+# @device: #optional Block device name (deprecated, use @id instead)
+#
+# @id: #optional The name or QOM path of the guest device (since: 2.8)
#
# Since: 2.5
##
{ 'command': 'x-blockdev-remove-medium',
- 'data': { 'device': 'str' } }
+ 'data': { '*device': 'str',
+ '*id': 'str' } }
##
# @x-blockdev-insert-medium:
# This command is still a work in progress and is considered experimental.
# Stay away from it unless you want to help with its development.
#
-# @device: block device name
+# @device: #optional Block device name (deprecated, use @id instead)
+#
+# @id: #optional The name or QOM path of the guest device (since: 2.8)
#
# @node-name: name of a node in the block driver state graph
#
# Since: 2.5
##
{ 'command': 'x-blockdev-insert-medium',
- 'data': { 'device': 'str',
+ 'data': { '*device': 'str',
+ '*id': 'str',
'node-name': 'str'} }
# combines blockdev-open-tray, x-blockdev-remove-medium,
# x-blockdev-insert-medium and blockdev-close-tray).
#
-# @device: block device name
+# @device: #optional Block device name (deprecated, use @id instead)
+#
+# @id: #optional The name or QOM path of the guest device
+# (since: 2.8)
#
# @filename: filename of the new image to be loaded
#
# Since: 2.5
##
{ 'command': 'blockdev-change-medium',
- 'data': { 'device': 'str',
+ 'data': { '*device': 'str',
+ '*id': 'str',
'filename': 'str',
'*format': 'str',
'*read-only-mode': 'BlockdevChangeReadOnlyMode' } }
#
# Emitted when a disk I/O error occurs
#
-# @device: device name
+# @device: device name. This is always present for compatibility
+# reasons, but it can be empty ("") if the image does not
+# have a device name associated.
+#
+# @node-name: node name. Note that errors may be reported for the root node
+# that is directly attached to a guest device rather than for the
+# node where the error occurred. (Since: 2.8)
#
# @operation: I/O operation
#
# Since: 0.13.0
##
{ 'event': 'BLOCK_IO_ERROR',
- 'data': { 'device': 'str', 'operation': 'IoOperationType',
+ 'data': { 'device': 'str', 'node-name': 'str', 'operation': 'IoOperationType',
'action': 'BlockErrorAction', '*nospace': 'bool',
'reason': 'str' } }
projects / qemu.git / blobdiff