*/
#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu-common.h"
+#include "cpu.h"
#include "hw/sysbus.h"
#include "hw/arm/arm.h"
#include "net/net.h"
#include "sysemu/sysemu.h"
#include "hw/boards.h"
#include "hw/block/flash.h"
-#include "sysemu/block-backend.h"
#include "hw/loader.h"
#include "hw/misc/zynq-xadc.h"
#include "hw/ssi/ssi.h"
#include "qemu/error-report.h"
-#include "hw/sd/sd.h"
+#include "hw/sd/sdhci.h"
+#include "hw/char/cadence_uart.h"
+#include "hw/net/cadence_gem.h"
+#include "hw/cpu/a9mpcore.h"
#define NUM_SPI_FLASHES 4
#define NUM_QSPI_FLASHES 2
#define SLCR_XILINX_UNLOCK_KEY 0xdf0d
#define SLCR_XILINX_LOCK_KEY 0x767b
+#define ZYNQ_SDHCI_CAPABILITIES 0x69ec0080 /* Datasheet: UG585 (v1.12.1) */
+
#define ARMV7_IMM16(x) (extract32((x), 0, 12) | \
extract32((x), 12, 4) << 16)
DeviceState *dev;
SysBusDevice *s;
- dev = qdev_create(NULL, "cadence_gem");
+ dev = qdev_create(NULL, TYPE_CADENCE_GEM);
if (nd->used) {
- qemu_check_nic_model(nd, "cadence_gem");
+ qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
qdev_set_nic_properties(dev, nd);
}
qdev_init_nofail(dev);
spi = (SSIBus *)qdev_get_child_bus(dev, bus_name);
for (j = 0; j < num_ss; ++j) {
- flash_dev = ssi_create_slave(spi, "n25q128");
+ DriveInfo *dinfo = drive_get_next(IF_MTD);
+ flash_dev = ssi_create_slave_no_init(spi, "n25q128");
+ if (dinfo) {
+ qdev_prop_set_drive(flash_dev, "drive",
+ blk_by_legacy_dinfo(dinfo), &error_fatal);
+ }
+ qdev_init_nofail(flash_dev);
cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(busdev, i * num_ss + j + 1, cs_line);
static void zynq_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
- const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
- ObjectClass *cpu_oc;
ARMCPU *cpu;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
- DeviceState *dev, *carddev;
+ DeviceState *dev;
SysBusDevice *busdev;
- DriveInfo *di;
- BlockBackend *blk;
qemu_irq pic[64];
int n;
- if (!cpu_model) {
- cpu_model = "cortex-a9";
- }
- cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, cpu_model);
-
- cpu = ARM_CPU(object_new(object_class_get_name(cpu_oc)));
+ cpu = ARM_CPU(object_new(machine->cpu_type));
/* By default A9 CPUs have EL3 enabled. This board does not
* currently support EL3 so the CPU EL3 property is disabled before
/* 256K of on-chip memory */
memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 << 10,
&error_fatal);
- vmstate_register_ram_global(ocm_ram);
memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram);
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000);
- dev = qdev_create(NULL, "a9mpcore_priv");
+ dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
qdev_prop_set_uint32(dev, "num-cpu", 1);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]);
sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[76-IRQ_OFFSET]);
- sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]);
- sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]);
+ cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0));
+ cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1));
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
gem_init(&nd_table[0], 0xE000B000, pic[54-IRQ_OFFSET]);
gem_init(&nd_table[1], 0xE000C000, pic[77-IRQ_OFFSET]);
- dev = qdev_create(NULL, "generic-sdhci");
- qdev_init_nofail(dev);
- sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0100000);
- sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[56-IRQ_OFFSET]);
-
- di = drive_get_next(IF_SD);
- blk = di ? blk_by_legacy_dinfo(di) : NULL;
- carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD);
- qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
- object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal);
-
- dev = qdev_create(NULL, "generic-sdhci");
- qdev_init_nofail(dev);
- sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0101000);
- sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[79-IRQ_OFFSET]);
-
- di = drive_get_next(IF_SD);
- blk = di ? blk_by_legacy_dinfo(di) : NULL;
- carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD);
- qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
- object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal);
+ for (n = 0; n < 2; n++) {
+ int hci_irq = n ? 79 : 56;
+ hwaddr hci_addr = n ? 0xE0101000 : 0xE0100000;
+ DriveInfo *di;
+ BlockBackend *blk;
+ DeviceState *carddev;
+
+ /* Compatible with:
+ * - SD Host Controller Specification Version 2.0 Part A2
+ * - SDIO Specification Version 2.0
+ * - MMC Specification Version 3.31
+ */
+ dev = qdev_create(NULL, TYPE_SYSBUS_SDHCI);
+ qdev_prop_set_uint8(dev, "sd-spec-version", 2);
+ qdev_prop_set_uint64(dev, "capareg", ZYNQ_SDHCI_CAPABILITIES);
+ qdev_init_nofail(dev);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, hci_addr);
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[hci_irq - IRQ_OFFSET]);
+
+ di = drive_get_next(IF_SD);
+ blk = di ? blk_by_legacy_dinfo(di) : NULL;
+ carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD);
+ qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
+ object_property_set_bool(OBJECT(carddev), true, "realized",
+ &error_fatal);
+ }
dev = qdev_create(NULL, TYPE_ZYNQ_XADC);
qdev_init_nofail(dev);
sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
}
+ dev = qdev_create(NULL, "xlnx.ps7-dev-cfg");
+ qdev_init_nofail(dev);
+ busdev = SYS_BUS_DEVICE(dev);
+ sysbus_connect_irq(busdev, 0, pic[40 - IRQ_OFFSET]);
+ sysbus_mmio_map(busdev, 0, 0xF8007000);
+
zynq_binfo.ram_size = ram_size;
zynq_binfo.kernel_filename = kernel_filename;
zynq_binfo.kernel_cmdline = kernel_cmdline;
{
mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9";
mc->init = zynq_init;
- mc->block_default_type = IF_SCSI;
mc->max_cpus = 1;
mc->no_sdcard = 1;
+ mc->ignore_memory_transaction_failures = true;
+ mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
}
DEFINE_MACHINE("xilinx-zynq-a9", zynq_machine_init)
projects / qemu.git / blobdiff