/*
* QEMU Parallel PORT emulation
- *
- * Copyright (c) 2003-2004 Fabrice Bellard
- *
+ *
+ * Copyright (c) 2003-2005 Fabrice Bellard
+ * Copyright (c) 2007 Marko Kohtala
+ *
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
-#include "vl.h"
+#include "hw.h"
+#include "qemu-char.h"
+#include "isa.h"
+#include "pc.h"
+#include "sysemu.h"
//#define DEBUG_PARALLEL
+#ifdef DEBUG_PARALLEL
+#define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
+#else
+#define pdebug(fmt, ...) ((void)0)
+#endif
+
+#define PARA_REG_DATA 0
+#define PARA_REG_STS 1
+#define PARA_REG_CTR 2
+#define PARA_REG_EPP_ADDR 3
+#define PARA_REG_EPP_DATA 4
+
/*
* These are the definitions for the Printer Status Register
*/
#define PARA_STS_PAPER 0x20 /* Out of paper */
#define PARA_STS_ONLINE 0x10 /* Online */
#define PARA_STS_ERROR 0x08 /* Error complement */
+#define PARA_STS_TMOUT 0x01 /* EPP timeout */
/*
* These are the definitions for the Printer Control Register
*/
+#define PARA_CTR_DIR 0x20 /* Direction (1=read, 0=write) */
#define PARA_CTR_INTEN 0x10 /* IRQ Enable */
#define PARA_CTR_SELECT 0x08 /* Select In complement */
#define PARA_CTR_INIT 0x04 /* Initialize Printer complement */
#define PARA_CTR_AUTOLF 0x02 /* Auto linefeed complement */
#define PARA_CTR_STROBE 0x01 /* Strobe complement */
-struct ParallelState {
- uint8_t data;
- uint8_t status; /* read only register */
+#define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
+
+typedef struct ParallelState {
+ uint8_t dataw;
+ uint8_t datar;
+ uint8_t status;
uint8_t control;
- int irq;
+ qemu_irq irq;
int irq_pending;
CharDriverState *chr;
-};
+ int hw_driver;
+ int epp_timeout;
+ uint32_t last_read_offset; /* For debugging */
+ /* Memory-mapped interface */
+ int it_shift;
+} ParallelState;
+
+typedef struct ISAParallelState {
+ ISADevice dev;
+ uint32_t index;
+ uint32_t iobase;
+ uint32_t isairq;
+ ParallelState state;
+} ISAParallelState;
static void parallel_update_irq(ParallelState *s)
{
if (s->irq_pending)
- pic_set_irq(s->irq, 1);
+ qemu_irq_raise(s->irq);
else
- pic_set_irq(s->irq, 0);
+ qemu_irq_lower(s->irq);
}
-static void parallel_ioport_write(void *opaque, uint32_t addr, uint32_t val)
+static void
+parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
{
ParallelState *s = opaque;
-
+
+ pdebug("write addr=0x%02x val=0x%02x\n", addr, val);
+
addr &= 7;
-#ifdef DEBUG_PARALLEL
- printf("parallel: write addr=0x%02x val=0x%02x\n", addr, val);
-#endif
switch(addr) {
- case 0:
- s->data = val;
+ case PARA_REG_DATA:
+ s->dataw = val;
parallel_update_irq(s);
break;
- case 2:
+ case PARA_REG_CTR:
+ val |= 0xc0;
if ((val & PARA_CTR_INIT) == 0 ) {
s->status = PARA_STS_BUSY;
s->status |= PARA_STS_ACK;
if (val & PARA_CTR_STROBE) {
s->status &= ~PARA_STS_BUSY;
if ((s->control & PARA_CTR_STROBE) == 0)
- qemu_chr_write(s->chr, &s->data, 1);
+ qemu_chr_fe_write(s->chr, &s->dataw, 1);
} else {
if (s->control & PARA_CTR_INTEN) {
s->irq_pending = 1;
}
}
-static uint32_t parallel_ioport_read(void *opaque, uint32_t addr)
+static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
+{
+ ParallelState *s = opaque;
+ uint8_t parm = val;
+ int dir;
+
+ /* Sometimes programs do several writes for timing purposes on old
+ HW. Take care not to waste time on writes that do nothing. */
+
+ s->last_read_offset = ~0U;
+
+ addr &= 7;
+ switch(addr) {
+ case PARA_REG_DATA:
+ if (s->dataw == val)
+ return;
+ pdebug("wd%02x\n", val);
+ qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
+ s->dataw = val;
+ break;
+ case PARA_REG_STS:
+ pdebug("ws%02x\n", val);
+ if (val & PARA_STS_TMOUT)
+ s->epp_timeout = 0;
+ break;
+ case PARA_REG_CTR:
+ val |= 0xc0;
+ if (s->control == val)
+ return;
+ pdebug("wc%02x\n", val);
+
+ if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
+ if (val & PARA_CTR_DIR) {
+ dir = 1;
+ } else {
+ dir = 0;
+ }
+ qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
+ parm &= ~PARA_CTR_DIR;
+ }
+
+ qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
+ s->control = val;
+ break;
+ case PARA_REG_EPP_ADDR:
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
+ /* Controls not correct for EPP address cycle, so do nothing */
+ pdebug("wa%02x s\n", val);
+ else {
+ struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
+ if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
+ s->epp_timeout = 1;
+ pdebug("wa%02x t\n", val);
+ }
+ else
+ pdebug("wa%02x\n", val);
+ }
+ break;
+ case PARA_REG_EPP_DATA:
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("we%02x s\n", val);
+ else {
+ struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
+ if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
+ s->epp_timeout = 1;
+ pdebug("we%02x t\n", val);
+ }
+ else
+ pdebug("we%02x\n", val);
+ }
+ break;
+ }
+}
+
+static void
+parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
+{
+ ParallelState *s = opaque;
+ uint16_t eppdata = cpu_to_le16(val);
+ int err;
+ struct ParallelIOArg ioarg = {
+ .buffer = &eppdata, .count = sizeof(eppdata)
+ };
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("we%04x s\n", val);
+ return;
+ }
+ err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
+ if (err) {
+ s->epp_timeout = 1;
+ pdebug("we%04x t\n", val);
+ }
+ else
+ pdebug("we%04x\n", val);
+}
+
+static void
+parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
+{
+ ParallelState *s = opaque;
+ uint32_t eppdata = cpu_to_le32(val);
+ int err;
+ struct ParallelIOArg ioarg = {
+ .buffer = &eppdata, .count = sizeof(eppdata)
+ };
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("we%08x s\n", val);
+ return;
+ }
+ err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
+ if (err) {
+ s->epp_timeout = 1;
+ pdebug("we%08x t\n", val);
+ }
+ else
+ pdebug("we%08x\n", val);
+}
+
+static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
{
ParallelState *s = opaque;
uint32_t ret = 0xff;
addr &= 7;
switch(addr) {
- case 0:
- ret = s->data;
+ case PARA_REG_DATA:
+ if (s->control & PARA_CTR_DIR)
+ ret = s->datar;
+ else
+ ret = s->dataw;
break;
- case 1:
+ case PARA_REG_STS:
ret = s->status;
s->irq_pending = 0;
if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
if (s->status & PARA_STS_ACK)
s->status &= ~PARA_STS_ACK;
else {
- /* XXX Fixme: wait 5 microseconds */
+ /* XXX Fixme: wait 5 microseconds */
s->status |= PARA_STS_ACK;
s->status |= PARA_STS_BUSY;
}
}
parallel_update_irq(s);
break;
- case 2:
+ case PARA_REG_CTR:
ret = s->control;
break;
}
-#ifdef DEBUG_PARALLEL
- printf("parallel: read addr=0x%02x val=0x%02x\n", addr, ret);
-#endif
+ pdebug("read addr=0x%02x val=0x%02x\n", addr, ret);
return ret;
}
-static int parallel_can_receive(ParallelState *s)
+static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
{
- return 0;
+ ParallelState *s = opaque;
+ uint8_t ret = 0xff;
+ addr &= 7;
+ switch(addr) {
+ case PARA_REG_DATA:
+ qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
+ if (s->last_read_offset != addr || s->datar != ret)
+ pdebug("rd%02x\n", ret);
+ s->datar = ret;
+ break;
+ case PARA_REG_STS:
+ qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
+ ret &= ~PARA_STS_TMOUT;
+ if (s->epp_timeout)
+ ret |= PARA_STS_TMOUT;
+ if (s->last_read_offset != addr || s->status != ret)
+ pdebug("rs%02x\n", ret);
+ s->status = ret;
+ break;
+ case PARA_REG_CTR:
+ /* s->control has some bits fixed to 1. It is zero only when
+ it has not been yet written to. */
+ if (s->control == 0) {
+ qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
+ if (s->last_read_offset != addr)
+ pdebug("rc%02x\n", ret);
+ s->control = ret;
+ }
+ else {
+ ret = s->control;
+ if (s->last_read_offset != addr)
+ pdebug("rc%02x\n", ret);
+ }
+ break;
+ case PARA_REG_EPP_ADDR:
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
+ /* Controls not correct for EPP addr cycle, so do nothing */
+ pdebug("ra%02x s\n", ret);
+ else {
+ struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
+ if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
+ s->epp_timeout = 1;
+ pdebug("ra%02x t\n", ret);
+ }
+ else
+ pdebug("ra%02x\n", ret);
+ }
+ break;
+ case PARA_REG_EPP_DATA:
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("re%02x s\n", ret);
+ else {
+ struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
+ if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
+ s->epp_timeout = 1;
+ pdebug("re%02x t\n", ret);
+ }
+ else
+ pdebug("re%02x\n", ret);
+ }
+ break;
+ }
+ s->last_read_offset = addr;
+ return ret;
}
-static void parallel_receive_byte(ParallelState *s, int ch)
+static uint32_t
+parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
{
+ ParallelState *s = opaque;
+ uint32_t ret;
+ uint16_t eppdata = ~0;
+ int err;
+ struct ParallelIOArg ioarg = {
+ .buffer = &eppdata, .count = sizeof(eppdata)
+ };
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("re%04x s\n", eppdata);
+ return eppdata;
+ }
+ err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
+ ret = le16_to_cpu(eppdata);
+
+ if (err) {
+ s->epp_timeout = 1;
+ pdebug("re%04x t\n", ret);
+ }
+ else
+ pdebug("re%04x\n", ret);
+ return ret;
}
-static int parallel_can_receive1(void *opaque)
+static uint32_t
+parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
{
ParallelState *s = opaque;
- return parallel_can_receive(s);
+ uint32_t ret;
+ uint32_t eppdata = ~0U;
+ int err;
+ struct ParallelIOArg ioarg = {
+ .buffer = &eppdata, .count = sizeof(eppdata)
+ };
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("re%08x s\n", eppdata);
+ return eppdata;
+ }
+ err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
+ ret = le32_to_cpu(eppdata);
+
+ if (err) {
+ s->epp_timeout = 1;
+ pdebug("re%08x t\n", ret);
+ }
+ else
+ pdebug("re%08x\n", ret);
+ return ret;
}
-static void parallel_receive1(void *opaque, const uint8_t *buf, int size)
+static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
{
- ParallelState *s = opaque;
- parallel_receive_byte(s, buf[0]);
+ pdebug("wecp%d=%02x\n", addr & 7, val);
}
-static void parallel_event(void *opaque, int event)
+static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
{
+ uint8_t ret = 0xff;
+
+ pdebug("recp%d:%02x\n", addr & 7, ret);
+ return ret;
}
-/* If fd is zero, it means that the parallel device uses the console */
-ParallelState *parallel_init(int base, int irq, CharDriverState *chr)
+static void parallel_reset(void *opaque)
{
- ParallelState *s;
+ ParallelState *s = opaque;
- s = qemu_mallocz(sizeof(ParallelState));
- if (!s)
- return NULL;
- s->irq = irq;
- s->data = 0;
+ s->datar = ~0;
+ s->dataw = ~0;
s->status = PARA_STS_BUSY;
s->status |= PARA_STS_ACK;
s->status |= PARA_STS_ONLINE;
s->status |= PARA_STS_ERROR;
+ s->status |= PARA_STS_TMOUT;
s->control = PARA_CTR_SELECT;
s->control |= PARA_CTR_INIT;
+ s->control |= 0xc0;
+ s->irq_pending = 0;
+ s->hw_driver = 0;
+ s->epp_timeout = 0;
+ s->last_read_offset = ~0U;
+}
+
+static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
+
+static int parallel_isa_initfn(ISADevice *dev)
+{
+ static int index;
+ ISAParallelState *isa = DO_UPCAST(ISAParallelState, dev, dev);
+ ParallelState *s = &isa->state;
+ int base;
+ uint8_t dummy;
+
+ if (!s->chr) {
+ fprintf(stderr, "Can't create parallel device, empty char device\n");
+ exit(1);
+ }
+
+ if (isa->index == -1)
+ isa->index = index;
+ if (isa->index >= MAX_PARALLEL_PORTS)
+ return -1;
+ if (isa->iobase == -1)
+ isa->iobase = isa_parallel_io[isa->index];
+ index++;
+
+ base = isa->iobase;
+ isa_init_irq(dev, &s->irq, isa->isairq);
+ qemu_register_reset(parallel_reset, s);
+
+ if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
+ s->hw_driver = 1;
+ s->status = dummy;
+ }
+
+ if (s->hw_driver) {
+ register_ioport_write(base, 8, 1, parallel_ioport_write_hw, s);
+ register_ioport_read(base, 8, 1, parallel_ioport_read_hw, s);
+ isa_init_ioport_range(dev, base, 8);
+
+ register_ioport_write(base+4, 1, 2, parallel_ioport_eppdata_write_hw2, s);
+ register_ioport_read(base+4, 1, 2, parallel_ioport_eppdata_read_hw2, s);
+ register_ioport_write(base+4, 1, 4, parallel_ioport_eppdata_write_hw4, s);
+ register_ioport_read(base+4, 1, 4, parallel_ioport_eppdata_read_hw4, s);
+ isa_init_ioport(dev, base+4);
+ register_ioport_write(base+0x400, 8, 1, parallel_ioport_ecp_write, s);
+ register_ioport_read(base+0x400, 8, 1, parallel_ioport_ecp_read, s);
+ isa_init_ioport_range(dev, base+0x400, 8);
+ }
+ else {
+ register_ioport_write(base, 8, 1, parallel_ioport_write_sw, s);
+ register_ioport_read(base, 8, 1, parallel_ioport_read_sw, s);
+ isa_init_ioport_range(dev, base, 8);
+ }
+ return 0;
+}
+
+/* Memory mapped interface */
+static uint32_t parallel_mm_readb (void *opaque, target_phys_addr_t addr)
+{
+ ParallelState *s = opaque;
+
+ return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFF;
+}
+
+static void parallel_mm_writeb (void *opaque,
+ target_phys_addr_t addr, uint32_t value)
+{
+ ParallelState *s = opaque;
- register_ioport_write(base, 8, 1, parallel_ioport_write, s);
- register_ioport_read(base, 8, 1, parallel_ioport_read, s);
+ parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFF);
+}
+
+static uint32_t parallel_mm_readw (void *opaque, target_phys_addr_t addr)
+{
+ ParallelState *s = opaque;
+
+ return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFFFF;
+}
+
+static void parallel_mm_writew (void *opaque,
+ target_phys_addr_t addr, uint32_t value)
+{
+ ParallelState *s = opaque;
+
+ parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFFFF);
+}
+
+static uint32_t parallel_mm_readl (void *opaque, target_phys_addr_t addr)
+{
+ ParallelState *s = opaque;
+
+ return parallel_ioport_read_sw(s, addr >> s->it_shift);
+}
+
+static void parallel_mm_writel (void *opaque,
+ target_phys_addr_t addr, uint32_t value)
+{
+ ParallelState *s = opaque;
+
+ parallel_ioport_write_sw(s, addr >> s->it_shift, value);
+}
+
+static CPUReadMemoryFunc * const parallel_mm_read_sw[] = {
+ ¶llel_mm_readb,
+ ¶llel_mm_readw,
+ ¶llel_mm_readl,
+};
+
+static CPUWriteMemoryFunc * const parallel_mm_write_sw[] = {
+ ¶llel_mm_writeb,
+ ¶llel_mm_writew,
+ ¶llel_mm_writel,
+};
+
+/* If fd is zero, it means that the parallel device uses the console */
+bool parallel_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq,
+ CharDriverState *chr)
+{
+ ParallelState *s;
+ int io_sw;
+
+ s = g_malloc0(sizeof(ParallelState));
+ s->irq = irq;
s->chr = chr;
- qemu_chr_add_read_handler(chr, parallel_can_receive1, parallel_receive1, s);
- qemu_chr_add_event_handler(chr, parallel_event);
- return s;
+ s->it_shift = it_shift;
+ qemu_register_reset(parallel_reset, s);
+
+ io_sw = cpu_register_io_memory(parallel_mm_read_sw, parallel_mm_write_sw,
+ s, DEVICE_NATIVE_ENDIAN);
+ cpu_register_physical_memory(base, 8 << it_shift, io_sw);
+ return true;
}
+
+static ISADeviceInfo parallel_isa_info = {
+ .qdev.name = "isa-parallel",
+ .qdev.size = sizeof(ISAParallelState),
+ .init = parallel_isa_initfn,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("index", ISAParallelState, index, -1),
+ DEFINE_PROP_HEX32("iobase", ISAParallelState, iobase, -1),
+ DEFINE_PROP_UINT32("irq", ISAParallelState, isairq, 7),
+ DEFINE_PROP_CHR("chardev", ISAParallelState, state.chr),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+};
+
+static void parallel_register_devices(void)
+{
+ isa_qdev_register(¶llel_isa_info);
+}
+
+device_init(parallel_register_devices)
projects / qemu.git / blobdiff