* Copyright (c) 2006-2007 CodeSourcery.
* Written by Paul Brook
*
- * This code is licenced under the GPL.
+ * This code is licensed under the GPL.
*/
#include "sysbus.h"
/* Bitbanded IO. Each word corresponds to a single bit. */
-/* Get the byte address of the real memory for a bitband acess. */
+/* Get the byte address of the real memory for a bitband access. */
static inline uint32_t bitband_addr(void * opaque, uint32_t addr)
{
uint32_t res;
cpu_physical_memory_write(addr, (uint8_t *)&v, 4);
}
-static CPUReadMemoryFunc * const bitband_readfn[] = {
- bitband_readb,
- bitband_readw,
- bitband_readl
-};
-
-static CPUWriteMemoryFunc * const bitband_writefn[] = {
- bitband_writeb,
- bitband_writew,
- bitband_writel
+static const MemoryRegionOps bitband_ops = {
+ .old_mmio = {
+ .read = { bitband_readb, bitband_readw, bitband_readl, },
+ .write = { bitband_writeb, bitband_writew, bitband_writel, },
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
};
typedef struct {
SysBusDevice busdev;
+ MemoryRegion iomem;
uint32_t base;
} BitBandState;
static int bitband_init(SysBusDevice *dev)
{
BitBandState *s = FROM_SYSBUS(BitBandState, dev);
- int iomemtype;
- iomemtype = cpu_register_io_memory(bitband_readfn, bitband_writefn,
- &s->base, DEVICE_NATIVE_ENDIAN);
- sysbus_init_mmio(dev, 0x02000000, iomemtype);
+ memory_region_init_io(&s->iomem, &bitband_ops, &s->base, "bitband",
+ 0x02000000);
+ sysbus_init_mmio(dev, &s->iomem);
return 0;
}
static void armv7m_reset(void *opaque)
{
- cpu_reset((CPUState *)opaque);
+ ARMCPU *cpu = opaque;
+
+ cpu_reset(CPU(cpu));
}
/* Init CPU and memory for a v7-M based board.
flash_size and sram_size are in kb.
Returns the NVIC array. */
-qemu_irq *armv7m_init(int flash_size, int sram_size,
+qemu_irq *armv7m_init(MemoryRegion *address_space_mem,
+ int flash_size, int sram_size,
const char *kernel_filename, const char *cpu_model)
{
- CPUState *env;
+ ARMCPU *cpu;
+ CPUARMState *env;
DeviceState *nvic;
/* FIXME: make this local state. */
static qemu_irq pic[64];
uint64_t lowaddr;
int i;
int big_endian;
+ MemoryRegion *sram = g_new(MemoryRegion, 1);
+ MemoryRegion *flash = g_new(MemoryRegion, 1);
+ MemoryRegion *hack = g_new(MemoryRegion, 1);
flash_size *= 1024;
sram_size *= 1024;
- if (!cpu_model)
+ if (cpu_model == NULL) {
cpu_model = "cortex-m3";
- env = cpu_init(cpu_model);
- if (!env) {
+ }
+ cpu = cpu_arm_init(cpu_model);
+ if (cpu == NULL) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
+ env = &cpu->env;
#if 0
/* > 32Mb SRAM gets complicated because it overlaps the bitband area.
#endif
/* Flash programming is done via the SCU, so pretend it is ROM. */
- cpu_register_physical_memory(0, flash_size,
- qemu_ram_alloc(NULL, "armv7m.flash",
- flash_size) | IO_MEM_ROM);
- cpu_register_physical_memory(0x20000000, sram_size,
- qemu_ram_alloc(NULL, "armv7m.sram",
- sram_size) | IO_MEM_RAM);
+ memory_region_init_ram(flash, "armv7m.flash", flash_size);
+ vmstate_register_ram_global(flash);
+ memory_region_set_readonly(flash, true);
+ memory_region_add_subregion(address_space_mem, 0, flash);
+ memory_region_init_ram(sram, "armv7m.sram", sram_size);
+ vmstate_register_ram_global(sram);
+ memory_region_add_subregion(address_space_mem, 0x20000000, sram);
armv7m_bitband_init();
nvic = qdev_create(NULL, "armv7m_nvic");
env->nvic = nvic;
qdev_init_nofail(nvic);
- cpu_pic = arm_pic_init_cpu(env);
+ cpu_pic = arm_pic_init_cpu(cpu);
sysbus_connect_irq(sysbus_from_qdev(nvic), 0, cpu_pic[ARM_PIC_CPU_IRQ]);
for (i = 0; i < 64; i++) {
pic[i] = qdev_get_gpio_in(nvic, i);
/* Hack to map an additional page of ram at the top of the address
space. This stops qemu complaining about executing code outside RAM
when returning from an exception. */
- cpu_register_physical_memory(0xfffff000, 0x1000,
- qemu_ram_alloc(NULL, "armv7m.hack",
- 0x1000) | IO_MEM_RAM);
+ memory_region_init_ram(hack, "armv7m.hack", 0x1000);
+ vmstate_register_ram_global(hack);
+ memory_region_add_subregion(address_space_mem, 0xfffff000, hack);
- qemu_register_reset(armv7m_reset, env);
+ qemu_register_reset(armv7m_reset, cpu);
return pic;
}
-static SysBusDeviceInfo bitband_info = {
- .init = bitband_init,
- .qdev.name = "ARM,bitband-memory",
- .qdev.size = sizeof(BitBandState),
- .qdev.props = (Property[]) {
- DEFINE_PROP_UINT32("base", BitBandState, base, 0),
- DEFINE_PROP_END_OF_LIST(),
- }
+static Property bitband_properties[] = {
+ DEFINE_PROP_UINT32("base", BitBandState, base, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void bitband_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = bitband_init;
+ dc->props = bitband_properties;
+}
+
+static TypeInfo bitband_info = {
+ .name = "ARM,bitband-memory",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BitBandState),
+ .class_init = bitband_class_init,
};
-static void armv7m_register_devices(void)
+static void armv7m_register_types(void)
{
- sysbus_register_withprop(&bitband_info);
+ type_register_static(&bitband_info);
}
-device_init(armv7m_register_devices)
+type_init(armv7m_register_types)
projects / qemu.git / blobdiff