curses=""
docs=""
fdt=""
+netmap="no"
pixman=""
sdl=""
virtfs=""
seccomp=""
glusterfs=""
glusterfs_discard="no"
+glusterfs_zerofill="no"
virtio_blk_data_plane=""
gtk=""
gtkabi="2.0"
;;
--cxx=*) CXX="$optarg"
;;
- --iasl=*) iasl="$optarg"
- ;;
--source-path=*) source_path="$optarg"
;;
--cpu=*) cpu="$optarg"
audio_possible_drivers="oss sdl esd pa"
# needed for kinfo_getvmmap(3) in libutil.h
LIBS="-lutil $LIBS"
+ netmap="" # enable netmap autodetect
;;
DragonFly)
bsd="yes"
;;
--cxx=*)
;;
+ --iasl=*) iasl="$optarg"
+ ;;
--objcc=*) objcc="$optarg"
;;
--make=*) make="$optarg"
;;
--enable-vde) vde="yes"
;;
+ --disable-netmap) netmap="no"
+ ;;
+ --enable-netmap) netmap="yes"
+ ;;
--disable-xen) xen="no"
;;
--enable-xen) xen="yes"
esac
done
+if ! has $python; then
+ error_exit "Python not found. Use --python=/path/to/python"
+fi
+
+# Note that if the Python conditional here evaluates True we will exit
+# with status 1 which is a shell 'false' value.
+if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then
+ error_exit "Cannot use '$python', Python 2.4 or later is required." \
+ "Note that Python 3 or later is not yet supported." \
+ "Use --python=/path/to/python to specify a supported Python."
+fi
+
+# The -B switch was added in Python 2.6.
+# If it is supplied, compiled files are not written.
+# Use it for Python versions which support it.
+if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then
+ python="$python -B"
+fi
+
case "$cpu" in
ppc)
CPU_CFLAGS="-m32"
Usage: configure [options]
Options: [defaults in brackets after descriptions]
+Standard options:
+ --help print this message
+ --prefix=PREFIX install in PREFIX [$prefix]
+ --interp-prefix=PREFIX where to find shared libraries, etc.
+ use %M for cpu name [$interp_prefix]
+ --target-list=LIST set target list (default: build everything)
+$(echo Available targets: $default_target_list | \
+ fold -s -w 53 | sed -e 's/^/ /')
+
+Advanced options (experts only):
+ --source-path=PATH path of source code [$source_path]
+ --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]
+ --cc=CC use C compiler CC [$cc]
+ --iasl=IASL use ACPI compiler IASL [$iasl]
+ --host-cc=CC use C compiler CC [$host_cc] for code run at
+ build time
+ --cxx=CXX use C++ compiler CXX [$cxx]
+ --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]
+ --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS
+ --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS
+ --make=MAKE use specified make [$make]
+ --install=INSTALL use specified install [$install]
+ --python=PYTHON use specified python [$python]
+ --smbd=SMBD use specified smbd [$smbd]
+ --static enable static build [$static]
+ --mandir=PATH install man pages in PATH
+ --datadir=PATH install firmware in PATH$confsuffix
+ --docdir=PATH install documentation in PATH$confsuffix
+ --bindir=PATH install binaries in PATH
+ --libdir=PATH install libraries in PATH
+ --sysconfdir=PATH install config in PATH$confsuffix
+ --localstatedir=PATH install local state in PATH (set at runtime on win32)
+ --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]
+ --enable-debug-tcg enable TCG debugging
+ --disable-debug-tcg disable TCG debugging (default)
+ --enable-debug-info enable debugging information (default)
+ --disable-debug-info disable debugging information
+ --enable-debug enable common debug build options
+ --enable-sparse enable sparse checker
+ --disable-sparse disable sparse checker (default)
+ --disable-strip disable stripping binaries
+ --disable-werror disable compilation abort on warning
+ --disable-sdl disable SDL
+ --enable-sdl enable SDL
+ --disable-gtk disable gtk UI
+ --enable-gtk enable gtk UI
+ --disable-virtfs disable VirtFS
+ --enable-virtfs enable VirtFS
+ --disable-vnc disable VNC
+ --enable-vnc enable VNC
+ --disable-cocoa disable Cocoa (Mac OS X only)
+ --enable-cocoa enable Cocoa (default on Mac OS X)
+ --audio-drv-list=LIST set audio drivers list:
+ Available drivers: $audio_possible_drivers
+ --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L
+ --block-drv-rw-whitelist=L
+ set block driver read-write whitelist
+ (affects only QEMU, not qemu-img)
+ --block-drv-ro-whitelist=L
+ set block driver read-only whitelist
+ (affects only QEMU, not qemu-img)
+ --disable-xen disable xen backend driver support
+ --enable-xen enable xen backend driver support
+ --disable-xen-pci-passthrough
+ --enable-xen-pci-passthrough
+ --disable-brlapi disable BrlAPI
+ --enable-brlapi enable BrlAPI
+ --disable-vnc-tls disable TLS encryption for VNC server
+ --enable-vnc-tls enable TLS encryption for VNC server
+ --disable-vnc-sasl disable SASL encryption for VNC server
+ --enable-vnc-sasl enable SASL encryption for VNC server
+ --disable-vnc-jpeg disable JPEG lossy compression for VNC server
+ --enable-vnc-jpeg enable JPEG lossy compression for VNC server
+ --disable-vnc-png disable PNG compression for VNC server (default)
+ --enable-vnc-png enable PNG compression for VNC server
+ --disable-vnc-ws disable Websockets support for VNC server
+ --enable-vnc-ws enable Websockets support for VNC server
+ --disable-curses disable curses output
+ --enable-curses enable curses output
+ --disable-curl disable curl connectivity
+ --enable-curl enable curl connectivity
+ --disable-fdt disable fdt device tree
+ --enable-fdt enable fdt device tree
+ --disable-bluez disable bluez stack connectivity
+ --enable-bluez enable bluez stack connectivity
+ --disable-slirp disable SLIRP userspace network connectivity
+ --disable-kvm disable KVM acceleration support
+ --enable-kvm enable KVM acceleration support
+ --disable-rdma disable RDMA-based migration support
+ --enable-rdma enable RDMA-based migration support
+ --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)
+ --enable-system enable all system emulation targets
+ --disable-system disable all system emulation targets
+ --enable-user enable supported user emulation targets
+ --disable-user disable all user emulation targets
+ --enable-linux-user enable all linux usermode emulation targets
+ --disable-linux-user disable all linux usermode emulation targets
+ --enable-bsd-user enable all BSD usermode emulation targets
+ --disable-bsd-user disable all BSD usermode emulation targets
+ --enable-guest-base enable GUEST_BASE support for usermode
+ emulation targets
+ --disable-guest-base disable GUEST_BASE support
+ --enable-pie build Position Independent Executables
+ --disable-pie do not build Position Independent Executables
+ --fmod-lib path to FMOD library
+ --fmod-inc path to FMOD includes
+ --oss-lib path to OSS library
+ --enable-uname-release=R Return R for uname -r in usermode emulation
+ --cpu=CPU Build for host CPU [$cpu]
+ --disable-uuid disable uuid support
+ --enable-uuid enable uuid support
+ --disable-vde disable support for vde network
+ --enable-vde enable support for vde network
+ --disable-netmap disable support for netmap network
+ --enable-netmap enable support for netmap network
+ --disable-linux-aio disable Linux AIO support
+ --enable-linux-aio enable Linux AIO support
+ --disable-cap-ng disable libcap-ng support
+ --enable-cap-ng enable libcap-ng support
+ --disable-attr disables attr and xattr support
+ --enable-attr enable attr and xattr support
+ --disable-blobs disable installing provided firmware blobs
+ --enable-docs enable documentation build
+ --disable-docs disable documentation build
+ --disable-vhost-net disable vhost-net acceleration support
+ --enable-vhost-net enable vhost-net acceleration support
+ --enable-trace-backend=B Set trace backend
+ Available backends: $($python $source_path/scripts/tracetool.py --list-backends)
+ --with-trace-file=NAME Full PATH,NAME of file to store traces
+ Default:trace-<pid>
+ --disable-spice disable spice
+ --enable-spice enable spice
+ --enable-rbd enable building the rados block device (rbd)
+ --disable-libiscsi disable iscsi support
+ --enable-libiscsi enable iscsi support
+ --disable-smartcard-nss disable smartcard nss support
+ --enable-smartcard-nss enable smartcard nss support
+ --disable-libusb disable libusb (for usb passthrough)
+ --enable-libusb enable libusb (for usb passthrough)
+ --disable-usb-redir disable usb network redirection support
+ --enable-usb-redir enable usb network redirection support
+ --disable-guest-agent disable building of the QEMU Guest Agent
+ --enable-guest-agent enable building of the QEMU Guest Agent
+ --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent
+ --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)
+ --disable-seccomp disable seccomp support
+ --enable-seccomp enables seccomp support
+ --with-coroutine=BACKEND coroutine backend. Supported options:
+ gthread, ucontext, sigaltstack, windows
+ --disable-coroutine-pool disable coroutine freelist (worse performance)
+ --enable-coroutine-pool enable coroutine freelist (better performance)
+ --enable-glusterfs enable GlusterFS backend
+ --disable-glusterfs disable GlusterFS backend
+ --enable-gcov enable test coverage analysis with gcov
+ --gcov=GCOV use specified gcov [$gcov_tool]
+ --enable-tpm enable TPM support
+ --disable-libssh2 disable ssh block device support
+ --enable-libssh2 enable ssh block device support
+ --disable-vhdx disables support for the Microsoft VHDX image format
+ --enable-vhdx enable support for the Microsoft VHDX image format
+
+NOTE: The object files are built at the place where configure is launched
EOF
-echo "Standard options:"
-echo " --help print this message"
-echo " --prefix=PREFIX install in PREFIX [$prefix]"
-echo " --interp-prefix=PREFIX where to find shared libraries, etc."
-echo " use %M for cpu name [$interp_prefix]"
-echo " --target-list=LIST set target list (default: build everything)"
-echo "Available targets: $default_target_list" | \
- fold -s -w 53 | sed -e 's/^/ /'
-echo ""
-echo "Advanced options (experts only):"
-echo " --source-path=PATH path of source code [$source_path]"
-echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]"
-echo " --cc=CC use C compiler CC [$cc]"
-echo " --iasl=IASL use ACPI compiler IASL [$iasl]"
-echo " --host-cc=CC use C compiler CC [$host_cc] for code run at"
-echo " build time"
-echo " --cxx=CXX use C++ compiler CXX [$cxx]"
-echo " --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]"
-echo " --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS"
-echo " --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS"
-echo " --make=MAKE use specified make [$make]"
-echo " --install=INSTALL use specified install [$install]"
-echo " --python=PYTHON use specified python [$python]"
-echo " --smbd=SMBD use specified smbd [$smbd]"
-echo " --static enable static build [$static]"
-echo " --mandir=PATH install man pages in PATH"
-echo " --datadir=PATH install firmware in PATH$confsuffix"
-echo " --docdir=PATH install documentation in PATH$confsuffix"
-echo " --bindir=PATH install binaries in PATH"
-echo " --libdir=PATH install libraries in PATH"
-echo " --sysconfdir=PATH install config in PATH$confsuffix"
-echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)"
-echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]"
-echo " --enable-debug-tcg enable TCG debugging"
-echo " --disable-debug-tcg disable TCG debugging (default)"
-echo " --enable-debug-info enable debugging information (default)"
-echo " --disable-debug-info disable debugging information"
-echo " --enable-debug enable common debug build options"
-echo " --enable-sparse enable sparse checker"
-echo " --disable-sparse disable sparse checker (default)"
-echo " --disable-strip disable stripping binaries"
-echo " --disable-werror disable compilation abort on warning"
-echo " --disable-sdl disable SDL"
-echo " --enable-sdl enable SDL"
-echo " --disable-gtk disable gtk UI"
-echo " --enable-gtk enable gtk UI"
-echo " --disable-virtfs disable VirtFS"
-echo " --enable-virtfs enable VirtFS"
-echo " --disable-vnc disable VNC"
-echo " --enable-vnc enable VNC"
-echo " --disable-cocoa disable Cocoa (Mac OS X only)"
-echo " --enable-cocoa enable Cocoa (default on Mac OS X)"
-echo " --audio-drv-list=LIST set audio drivers list:"
-echo " Available drivers: $audio_possible_drivers"
-echo " --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L"
-echo " --block-drv-rw-whitelist=L"
-echo " set block driver read-write whitelist"
-echo " (affects only QEMU, not qemu-img)"
-echo " --block-drv-ro-whitelist=L"
-echo " set block driver read-only whitelist"
-echo " (affects only QEMU, not qemu-img)"
-echo " --disable-xen disable xen backend driver support"
-echo " --enable-xen enable xen backend driver support"
-echo " --disable-xen-pci-passthrough"
-echo " --enable-xen-pci-passthrough"
-echo " --disable-brlapi disable BrlAPI"
-echo " --enable-brlapi enable BrlAPI"
-echo " --disable-vnc-tls disable TLS encryption for VNC server"
-echo " --enable-vnc-tls enable TLS encryption for VNC server"
-echo " --disable-vnc-sasl disable SASL encryption for VNC server"
-echo " --enable-vnc-sasl enable SASL encryption for VNC server"
-echo " --disable-vnc-jpeg disable JPEG lossy compression for VNC server"
-echo " --enable-vnc-jpeg enable JPEG lossy compression for VNC server"
-echo " --disable-vnc-png disable PNG compression for VNC server (default)"
-echo " --enable-vnc-png enable PNG compression for VNC server"
-echo " --disable-vnc-ws disable Websockets support for VNC server"
-echo " --enable-vnc-ws enable Websockets support for VNC server"
-echo " --disable-curses disable curses output"
-echo " --enable-curses enable curses output"
-echo " --disable-curl disable curl connectivity"
-echo " --enable-curl enable curl connectivity"
-echo " --disable-fdt disable fdt device tree"
-echo " --enable-fdt enable fdt device tree"
-echo " --disable-bluez disable bluez stack connectivity"
-echo " --enable-bluez enable bluez stack connectivity"
-echo " --disable-slirp disable SLIRP userspace network connectivity"
-echo " --disable-kvm disable KVM acceleration support"
-echo " --enable-kvm enable KVM acceleration support"
-echo " --disable-rdma disable RDMA-based migration support"
-echo " --enable-rdma enable RDMA-based migration support"
-echo " --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)"
-echo " --enable-system enable all system emulation targets"
-echo " --disable-system disable all system emulation targets"
-echo " --enable-user enable supported user emulation targets"
-echo " --disable-user disable all user emulation targets"
-echo " --enable-linux-user enable all linux usermode emulation targets"
-echo " --disable-linux-user disable all linux usermode emulation targets"
-echo " --enable-bsd-user enable all BSD usermode emulation targets"
-echo " --disable-bsd-user disable all BSD usermode emulation targets"
-echo " --enable-guest-base enable GUEST_BASE support for usermode"
-echo " emulation targets"
-echo " --disable-guest-base disable GUEST_BASE support"
-echo " --enable-pie build Position Independent Executables"
-echo " --disable-pie do not build Position Independent Executables"
-echo " --fmod-lib path to FMOD library"
-echo " --fmod-inc path to FMOD includes"
-echo " --oss-lib path to OSS library"
-echo " --enable-uname-release=R Return R for uname -r in usermode emulation"
-echo " --cpu=CPU Build for host CPU [$cpu]"
-echo " --disable-uuid disable uuid support"
-echo " --enable-uuid enable uuid support"
-echo " --disable-vde disable support for vde network"
-echo " --enable-vde enable support for vde network"
-echo " --disable-linux-aio disable Linux AIO support"
-echo " --enable-linux-aio enable Linux AIO support"
-echo " --disable-cap-ng disable libcap-ng support"
-echo " --enable-cap-ng enable libcap-ng support"
-echo " --disable-attr disables attr and xattr support"
-echo " --enable-attr enable attr and xattr support"
-echo " --disable-blobs disable installing provided firmware blobs"
-echo " --enable-docs enable documentation build"
-echo " --disable-docs disable documentation build"
-echo " --disable-vhost-net disable vhost-net acceleration support"
-echo " --enable-vhost-net enable vhost-net acceleration support"
-echo " --enable-trace-backend=B Set trace backend"
-echo " Available backends:" $($python "$source_path"/scripts/tracetool.py --list-backends)
-echo " --with-trace-file=NAME Full PATH,NAME of file to store traces"
-echo " Default:trace-<pid>"
-echo " --disable-spice disable spice"
-echo " --enable-spice enable spice"
-echo " --enable-rbd enable building the rados block device (rbd)"
-echo " --disable-libiscsi disable iscsi support"
-echo " --enable-libiscsi enable iscsi support"
-echo " --disable-smartcard-nss disable smartcard nss support"
-echo " --enable-smartcard-nss enable smartcard nss support"
-echo " --disable-libusb disable libusb (for usb passthrough)"
-echo " --enable-libusb enable libusb (for usb passthrough)"
-echo " --disable-usb-redir disable usb network redirection support"
-echo " --enable-usb-redir enable usb network redirection support"
-echo " --disable-guest-agent disable building of the QEMU Guest Agent"
-echo " --enable-guest-agent enable building of the QEMU Guest Agent"
-echo " --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent"
-echo " --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)"
-echo " --disable-seccomp disable seccomp support"
-echo " --enable-seccomp enables seccomp support"
-echo " --with-coroutine=BACKEND coroutine backend. Supported options:"
-echo " gthread, ucontext, sigaltstack, windows"
-echo " --disable-coroutine-pool disable coroutine freelist (worse performance)"
-echo " --enable-coroutine-pool enable coroutine freelist (better performance)"
-echo " --enable-glusterfs enable GlusterFS backend"
-echo " --disable-glusterfs disable GlusterFS backend"
-echo " --enable-gcov enable test coverage analysis with gcov"
-echo " --gcov=GCOV use specified gcov [$gcov_tool]"
-echo " --enable-tpm enable TPM support"
-echo " --disable-libssh2 disable ssh block device support"
-echo " --enable-libssh2 enable ssh block device support"
-echo " --disable-vhdx disables support for the Microsoft VHDX image format"
-echo " --enable-vhdx enable support for the Microsoft VHDX image format"
-echo ""
-echo "NOTE: The object files are built at the place where configure is launched"
exit 1
fi
fi
fi
-if ! has $python; then
- error_exit "Python not found. Use --python=/path/to/python"
-fi
-
-# Note that if the Python conditional here evaluates True we will exit
-# with status 1 which is a shell 'false' value.
-if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then
- error_exit "Cannot use '$python', Python 2.4 or later is required." \
- "Note that Python 3 or later is not yet supported." \
- "Use --python=/path/to/python to specify a supported Python."
-fi
-
-# The -B switch was added in Python 2.6.
-# If it is supplied, compiled files are not written.
-# Use it for Python versions which support it.
-if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then
- python="$python -B"
-fi
-
if test -z "${target_list+xxx}" ; then
target_list="$default_target_list"
else
fi
fi
+##########################################
+# netmap headers probe
+if test "$netmap" != "no" ; then
+ cat > $TMPC << EOF
+#include <inttypes.h>
+#include <net/if.h>
+#include <net/netmap.h>
+#include <net/netmap_user.h>
+int main(void) { return 0; }
+EOF
+ if compile_prog "" "" ; then
+ netmap=yes
+ else
+ if test "$netmap" = "yes" ; then
+ feature_not_found "netmap"
+ fi
+ netmap=no
+ fi
+fi
+
##########################################
# libcap-ng library probe
if test "$cap_ng" != "no" ; then
if $pkg_config --atleast-version=5 glusterfs-api; then
glusterfs_discard="yes"
fi
+ if $pkg_config --atleast-version=6 glusterfs-api; then
+ glusterfs_zerofill="yes"
+ fi
else
if test "$glusterfs" = "yes" ; then
feature_not_found "GlusterFS backend support"
##########################################
# Do we have libiscsi
-# We check for iscsi_unmap_sync() to make sure we have a
-# recent enough version of libiscsi.
+# We check for iscsi_write16_sync() to make sure we have a
+# at least version 1.4.0 of libiscsi.
if test "$libiscsi" != "no" ; then
cat > $TMPC << EOF
#include <stdio.h>
#include <iscsi/iscsi.h>
-int main(void) { iscsi_unmap_sync(NULL,0,0,0,NULL,0); return 0; }
+int main(void) { iscsi_write16_sync(NULL,0,0,NULL,0,0,0,0,0,0,0); return 0; }
EOF
if $pkg_config --atleast-version=1.7.0 libiscsi; then
libiscsi="yes"
fi
fi
+# We also need to know the API version because there was an
+# API change from 1.4.0 to 1.5.0.
+if test "$libiscsi" = "yes"; then
+ cat >$TMPC <<EOF
+#include <iscsi/iscsi.h>
+int main(void)
+{
+ iscsi_read10_task(0, 0, 0, 0, 0, 0, 0);
+ return 0;
+}
+EOF
+ if compile_prog "" "-liscsi"; then
+ libiscsi_version="1.4.0"
+ fi
+fi
##########################################
# Do we need libm
echo "GUEST_BASE $guest_base"
echo "PIE $pie"
echo "vde support $vde"
+echo "netmap support $netmap"
echo "Linux AIO support $linux_aio"
echo "ATTR/XATTR support $attr"
echo "Install blobs $blobs"
echo "libusb $libusb"
echo "usb net redir $usb_redir"
echo "GLX support $glx"
+if test "$libiscsi_version" = "1.4.0"; then
+echo "libiscsi support $libiscsi (1.4.0)"
+else
echo "libiscsi support $libiscsi"
+fi
echo "build guest agent $guest_agent"
echo "QGA VSS support $guest_agent_with_vss"
echo "seccomp support $seccomp"
if test "$vde" = "yes" ; then
echo "CONFIG_VDE=y" >> $config_host_mak
fi
+if test "$netmap" = "yes" ; then
+ echo "CONFIG_NETMAP=y" >> $config_host_mak
+fi
if test "$cap_ng" = "yes" ; then
echo "CONFIG_LIBCAP=y" >> $config_host_mak
fi
if test "$libiscsi" = "yes" ; then
echo "CONFIG_LIBISCSI=y" >> $config_host_mak
+ if test "$libiscsi_version" = "1.4.0"; then
+ echo "CONFIG_LIBISCSI_1_4=y" >> $config_host_mak
+ fi
fi
if test "$seccomp" = "yes"; then
echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
fi
+if test "$glusterfs_zerofill" = "yes" ; then
+ echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
+fi
+
if test "$libssh2" = "yes" ; then
echo "CONFIG_LIBSSH2=y" >> $config_host_mak
fi
aarch64)
TARGET_BASE_ARCH=arm
bflt="yes"
- gdb_xml_files="aarch64-core.xml"
+ gdb_xml_files="aarch64-core.xml aarch64-fpu.xml"
;;
cris)
;;
*)
esac
case "$target_name" in
- arm|i386|x86_64|ppcemb|ppc|ppc64|s390x)
+ aarch64|arm|i386|x86_64|ppcemb|ppc|ppc64|s390x)
# Make sure the target and host cpus are compatible
if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
\( "$target_name" = "$cpu" -o \
do
FILES="$FILES pc-bios/`basename $bios_file`"
done
+for test_file in `find $source_path/tests/acpi-test-data -type f`
+do
+ FILES="$FILES tests/acpi-test-data`echo $test_file | sed -e 's/.*acpi-test-data//'`"
+done
mkdir -p $DIRS
for f in $FILES ; do
if [ -e "$source_path/$f" ] && [ "$source_path" != `pwd` ]; then
projects / qemu.git / blobdiff