vhost-user: add multi queue support

[qemu.git] / hw / ide / ahci.h

diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h
index 9a4064f892bf7ab369ab89fc4689726aef16917f..501c002c3172b46ea3deced1e4cd255194581da6 100644 (file)
--- a/hw/ide/ahci.h
+++ b/hw/ide/ahci.h
@@ -132,26 +132,7 @@
 #define PORT_CMD_ICC_PARTIAL      (0x2 << 28) /* Put i/f in partial state */
 #define PORT_CMD_ICC_SLUMBER      (0x6 << 28) /* Put i/f in slumber state */
 
-#define PORT_IRQ_STAT_DHRS        (1 << 0) /* Device to Host Register FIS */
-#define PORT_IRQ_STAT_PSS         (1 << 1) /* PIO Setup FIS */
-#define PORT_IRQ_STAT_DSS         (1 << 2) /* DMA Setup FIS */
-#define PORT_IRQ_STAT_SDBS        (1 << 3) /* Set Device Bits */
-#define PORT_IRQ_STAT_UFS         (1 << 4) /* Unknown FIS */
-#define PORT_IRQ_STAT_DPS         (1 << 5) /* Descriptor Processed */
-#define PORT_IRQ_STAT_PCS         (1 << 6) /* Port Connect Change Status */
-#define PORT_IRQ_STAT_DMPS        (1 << 7) /* Device Mechanical Presence
-                                              Status */
-#define PORT_IRQ_STAT_PRCS        (1 << 22) /* File Ready Status */
-#define PORT_IRQ_STAT_IPMS        (1 << 23) /* Incorrect Port Multiplier
-                                               Status */
-#define PORT_IRQ_STAT_OFS         (1 << 24) /* Overflow Status */
-#define PORT_IRQ_STAT_INFS        (1 << 26) /* Interface Non-Fatal Error
-                                               Status */
-#define PORT_IRQ_STAT_IFS         (1 << 27) /* Interface Fatal Error */
-#define PORT_IRQ_STAT_HBDS        (1 << 28) /* Host Bus Data Error Status */
-#define PORT_IRQ_STAT_HBFS        (1 << 29) /* Host Bus Fatal Error Status */
-#define PORT_IRQ_STAT_TFES        (1 << 30) /* Task File Error Status */
-#define PORT_IRQ_STAT_CPDS        (1U << 31) /* Code Port Detect Status */
+#define PORT_CMD_RO_MASK          0x007dffe0 /* Which CMD bits are read only? */
 
 /* ap->flags bits */
 #define AHCI_FLAG_NO_NCQ                  (1 << 24)
@@ -177,7 +158,10 @@
 #define AHCI_SCR_SCTL_DET                 0xf
 
 #define SATA_FIS_TYPE_REGISTER_H2D        0x27
-#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
+#define   SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
+#define SATA_FIS_TYPE_REGISTER_D2H        0x34
+#define SATA_FIS_TYPE_PIO_SETUP           0x5f
+#define SATA_FIS_TYPE_SDB                 0xA1
 
 #define AHCI_CMD_HDR_CMD_FIS_LEN           0x1f
 #define AHCI_CMD_HDR_PRDT_LEN              16
@@ -201,10 +185,15 @@
 
 #define AHCI_COMMAND_TABLE_ACMD            0x40
 
+#define AHCI_PRDT_SIZE_MASK                0x3fffff
+
 #define IDE_FEATURE_DMA                    1
 
 #define READ_FPDMA_QUEUED                  0x60
 #define WRITE_FPDMA_QUEUED                 0x61
+#define NCQ_NON_DATA                       0x63
+#define RECEIVE_FPDMA_QUEUED               0x65
+#define SEND_FPDMA_QUEUED                  0x64
 
 #define RES_FIS_DSFIS                      0x00
 #define RES_FIS_PSFIS                      0x20
@@ -260,7 +249,7 @@ typedef struct AHCIDevice AHCIDevice;
 
 typedef struct NCQTransferState {
     AHCIDevice *drive;
-    BlockDriverAIOCB *aiocb;
+    BlockAIOCB *aiocb;
     QEMUSGList sglist;
     BlockAcctCookie acct;
     uint16_t sector_count;
@@ -346,9 +335,19 @@ typedef struct NCQFrame {
     uint8_t reserved10;
 } QEMU_PACKED NCQFrame;
 
+typedef struct SDBFIS {
+    uint8_t type;
+    uint8_t flags;
+    uint8_t status;
+    uint8_t error;
+    uint32_t payload;
+} QEMU_PACKED SDBFIS;
+
 void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
 void ahci_uninit(AHCIState *s);
 
 void ahci_reset(AHCIState *s);
 
+void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd);
+
 #endif /* HW_IDE_AHCI_H */