#include "sysbus.h"
#include "pci.h"
+#include "pci_host.h"
+#include "apb_pci.h"
/* debug APB */
//#define DEBUG_APB
#define APB_DPRINTF(fmt, ...)
#endif
-typedef target_phys_addr_t pci_addr_t;
-#include "pci_host.h"
+/*
+ * Chipset docs:
+ * PBM: "UltraSPARC IIi User's Manual",
+ * http://www.sun.com/processors/manuals/805-0087.pdf
+ *
+ * APB: "Advanced PCI Bridge (APB) User's Manual",
+ * http://www.sun.com/processors/manuals/805-1251.pdf
+ */
typedef struct APBState {
SysBusDevice busdev;
PCIHostState host_state;
} APBState;
-static void pci_apb_config_writel (void *opaque, target_phys_addr_t addr,
- uint32_t val)
-{
- APBState *s = opaque;
-
-#ifdef TARGET_WORDS_BIGENDIAN
- val = bswap32(val);
-#endif
- APB_DPRINTF("config_writel addr " TARGET_FMT_plx " val %x\n", addr,
- val);
- s->host_state.config_reg = val;
-}
-
-static uint32_t pci_apb_config_readl (void *opaque,
- target_phys_addr_t addr)
-{
- APBState *s = opaque;
- uint32_t val;
-
- val = s->host_state.config_reg;
-#ifdef TARGET_WORDS_BIGENDIAN
- val = bswap32(val);
-#endif
- APB_DPRINTF("config_readl addr " TARGET_FMT_plx " val %x\n", addr,
- val);
- return val;
-}
-
-static CPUWriteMemoryFunc * const pci_apb_config_write[] = {
- &pci_apb_config_writel,
- &pci_apb_config_writel,
- &pci_apb_config_writel,
-};
-
-static CPUReadMemoryFunc * const pci_apb_config_read[] = {
- &pci_apb_config_readl,
- &pci_apb_config_readl,
- &pci_apb_config_readl,
-};
-
static void apb_config_writel (void *opaque, target_phys_addr_t addr,
uint32_t val)
{
&apb_config_readl,
};
-static CPUWriteMemoryFunc * const pci_apb_write[] = {
- &pci_host_data_writeb,
- &pci_host_data_writew,
- &pci_host_data_writel,
-};
-
-static CPUReadMemoryFunc * const pci_apb_read[] = {
- &pci_host_data_readb,
- &pci_host_data_readw,
- &pci_host_data_readl,
-};
-
static void pci_apb_iowriteb (void *opaque, target_phys_addr_t addr,
uint32_t val)
{
- cpu_outb(NULL, addr & IOPORTS_MASK, val);
+ cpu_outb(addr & IOPORTS_MASK, val);
}
static void pci_apb_iowritew (void *opaque, target_phys_addr_t addr,
uint32_t val)
{
- cpu_outw(NULL, addr & IOPORTS_MASK, val);
+ cpu_outw(addr & IOPORTS_MASK, val);
}
static void pci_apb_iowritel (void *opaque, target_phys_addr_t addr,
uint32_t val)
{
- cpu_outl(NULL, addr & IOPORTS_MASK, val);
+ cpu_outl(addr & IOPORTS_MASK, val);
}
static uint32_t pci_apb_ioreadb (void *opaque, target_phys_addr_t addr)
{
uint32_t val;
- val = cpu_inb(NULL, addr & IOPORTS_MASK);
+ val = cpu_inb(addr & IOPORTS_MASK);
return val;
}
{
uint32_t val;
- val = cpu_inw(NULL, addr & IOPORTS_MASK);
+ val = cpu_inw(addr & IOPORTS_MASK);
return val;
}
{
uint32_t val;
- val = cpu_inl(NULL, addr & IOPORTS_MASK);
+ val = cpu_inl(addr & IOPORTS_MASK);
return val;
}
return bus_offset + irq_num;
}
-static void pci_apb_set_irq(qemu_irq *pic, int irq_num, int level)
+static void pci_apb_set_irq(void *opaque, int irq_num, int level)
{
+ qemu_irq *pic = opaque;
+
/* PCI IRQ map onto the first 32 INO. */
qemu_set_irq(pic[irq_num], level);
}
+static void apb_pci_bridge_init(PCIBus *b)
+{
+ PCIDevice *dev = pci_bridge_get_device(b);
+
+ /*
+ * command register:
+ * According to PCI bridge spec, after reset
+ * bus master bit is off
+ * memory space enable bit is off
+ * According to manual (805-1251.pdf).
+ * the reset value should be zero unless the boot pin is tied high
+ * (which is true) and thus it should be PCI_COMMAND_MEMORY.
+ */
+ pci_set_word(dev->config + PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ dev->config[PCI_LATENCY_TIMER] = 0x10;
+ dev->config[PCI_HEADER_TYPE] |= PCI_HEADER_TYPE_MULTI_FUNCTION;
+}
+
PCIBus *pci_apb_init(target_phys_addr_t special_base,
target_phys_addr_t mem_base,
qemu_irq *pic, PCIBus **bus2, PCIBus **bus3)
/* Ultrasparc PBM main bus */
dev = qdev_create(NULL, "pbm");
- qdev_init(dev);
+ qdev_init_nofail(dev);
s = sysbus_from_qdev(dev);
/* apb_config */
sysbus_mmio_map(s, 0, special_base + 0x2000ULL);
/* mem_data */
sysbus_mmio_map(s, 3, mem_base);
d = FROM_SYSBUS(APBState, s);
- d->host_state.bus = pci_register_bus(NULL, "pci",
+ d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci",
pci_apb_set_irq, pci_pbm_map_irq, pic,
0, 32);
pci_create_simple(d->host_state.bus, 0, "pbm");
/* APB secondary busses */
- *bus2 = pci_bridge_init(d->host_state.bus, 8, PCI_VENDOR_ID_SUN,
- PCI_DEVICE_ID_SUN_SIMBA, pci_apb_map_irq,
+ *bus2 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 0),
+ PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
+ pci_apb_map_irq,
"Advanced PCI Bus secondary bridge 1");
- *bus3 = pci_bridge_init(d->host_state.bus, 9, PCI_VENDOR_ID_SUN,
- PCI_DEVICE_ID_SUN_SIMBA, pci_apb_map_irq,
+ apb_pci_bridge_init(*bus2);
+
+ *bus3 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 1),
+ PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
+ pci_apb_map_irq,
"Advanced PCI Bus secondary bridge 2");
+ apb_pci_bridge_init(*bus3);
return d->host_state.bus;
}
-static void pci_pbm_init_device(SysBusDevice *dev)
+static int pci_pbm_init_device(SysBusDevice *dev)
{
APBState *s;
pci_apb_iowrite, s);
sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
/* mem_config */
- pci_mem_config = cpu_register_io_memory(pci_apb_config_read,
- pci_apb_config_write, s);
+ pci_mem_config = pci_host_conf_register_mmio(&s->host_state);
sysbus_init_mmio(dev, 0x10ULL, pci_mem_config);
/* mem_data */
- pci_mem_data = cpu_register_io_memory(pci_apb_read,
- pci_apb_write, &s->host_state);
+ pci_mem_data = pci_host_data_register_mmio(&s->host_state);
sysbus_init_mmio(dev, 0x10000000ULL, pci_mem_data);
+ return 0;
}
-static void pbm_pci_host_init(PCIDevice *d)
+static int pbm_pci_host_init(PCIDevice *d)
{
pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_SUN);
pci_config_set_device_id(d->config, PCI_DEVICE_ID_SUN_SABRE);
pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
d->config[0x0D] = 0x10; // latency_timer
d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
+ return 0;
}
static PCIDeviceInfo pbm_pci_host_info = {
projects / qemu.git / blobdiff