.args_type = "device:B,size:o",
.params = "device size",
.help = "resize a block image",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_block_resize,
+ .mhandler.cmd = hmp_block_resize,
},
STEXI
resizes image files, it can not resize block devices like LVM volumes.
ETEXI
+ {
+ .name = "block_stream",
+ .args_type = "device:B,base:s?",
+ .params = "device [base]",
+ .help = "copy data from a backing file into a block device",
+ .mhandler.cmd = hmp_block_stream,
+ },
+
+STEXI
+@item block_stream
+@findex block_stream
+Copy data from a backing file into a block device.
+ETEXI
+
+ {
+ .name = "block_job_set_speed",
+ .args_type = "device:B,value:o",
+ .params = "device value",
+ .help = "set maximum speed for a background block operation",
+ .mhandler.cmd = hmp_block_job_set_speed,
+ },
+
+STEXI
+@item block_job_set_stream
+@findex block_job_set_stream
+Set maximum speed for a background block operation.
+ETEXI
+
+ {
+ .name = "block_job_cancel",
+ .args_type = "device:B",
+ .params = "device",
+ .help = "stop an active block streaming operation",
+ .mhandler.cmd = hmp_block_job_cancel,
+ },
+
+STEXI
+@item block_job_cancel
+@findex block_job_cancel
+Stop an active block streaming operation.
+ETEXI
{
.name = "eject",
.args_type = "force:-f,device:B",
.params = "[-f] device",
.help = "eject a removable medium (use -f to force it)",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_eject,
+ .mhandler.cmd = hmp_eject,
},
STEXI
.args_type = "device:B,target:F,arg:s?",
.params = "device filename [format]",
.help = "change a removable medium, optional format",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_change,
+ .mhandler.cmd = hmp_change,
},
STEXI
.args_type = "",
.params = "",
.help = "resume emulation",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_cont,
+ .mhandler.cmd = hmp_cont,
},
STEXI
@item c or cont
@findex cont
Resume emulation.
+ETEXI
+
+ {
+ .name = "system_wakeup",
+ .args_type = "",
+ .params = "",
+ .help = "wakeup guest from suspend",
+ .mhandler.cmd = hmp_system_wakeup,
+ },
+
+STEXI
+@item system_wakeup
+@findex system_wakeup
+Wakeup guest from suspend.
ETEXI
{
.args_type = "val:l,size:i,filename:s",
.params = "addr size file",
.help = "save to disk virtual memory dump starting at 'addr' of size 'size'",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_memory_save,
+ .mhandler.cmd = hmp_memsave,
},
STEXI
.args_type = "val:l,size:i,filename:s",
.params = "addr size file",
.help = "save to disk physical memory dump starting at 'addr' of size 'size'",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_physical_memory_save,
+ .mhandler.cmd = hmp_pmemsave,
},
STEXI
.args_type = "",
.params = "",
.help = "inject an NMI on all guest's CPUs",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_inject_nmi,
+ .mhandler.cmd = hmp_inject_nmi,
},
#endif
STEXI
.args_type = "",
.params = "",
.help = "cancel the current VM migration",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_migrate_cancel,
+ .mhandler.cmd = hmp_migrate_cancel,
},
STEXI
.params = "value",
.help = "set maximum speed (in bytes) for migrations. "
"Defaults to MB if no size suffix is specified, ie. B/K/M/G/T",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_migrate_set_speed,
+ .mhandler.cmd = hmp_migrate_set_speed,
},
STEXI
.args_type = "value:T",
.params = "value",
.help = "set maximum tolerated downtime (in seconds) for migrations",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_migrate_set_downtime,
+ .mhandler.cmd = hmp_migrate_set_downtime,
},
STEXI
"If format is specified, the snapshot file will\n\t\t\t"
"be created in that format. Otherwise the\n\t\t\t"
"snapshot will be internal! (currently unsupported)",
- .mhandler.cmd_new = do_snapshot_blkdev,
+ .mhandler.cmd = hmp_snapshot_blkdev,
},
STEXI
Snapshot device, using snapshot file as target if provided
ETEXI
-#if defined(TARGET_I386)
{
.name = "drive_add",
.args_type = "pci_addr:s,opts:s",
.params = "[[<domain>:]<bus>:]<slot>\n"
"[file=file][,if=type][,bus=n]\n"
- "[,unit=m][,media=d][index=i]\n"
+ "[,unit=m][,media=d][,index=i]\n"
"[,cyls=c,heads=h,secs=s[,trans=t]]\n"
- "[snapshot=on|off][,cache=on|off]",
+ "[,snapshot=on|off][,cache=on|off]\n"
+ "[,readonly=on|off][,copy-on-read=on|off]",
.help = "add drive to PCI storage controller",
.mhandler.cmd = drive_hot_add,
},
-#endif
STEXI
@item drive_add
"<tlb header> = 32bit x 4\n\t\t\t"
"<tlb header prefix> = 32bit x 4",
.user_print = pcie_aer_inject_error_print,
- .mhandler.cmd_new = do_pcie_aer_inejct_error,
+ .mhandler.cmd_new = do_pcie_aer_inject_error,
},
STEXI
.args_type = "value:M",
.params = "target",
.help = "request VM to change its memory allocation (in MB)",
- .user_print = monitor_user_noop,
- .mhandler.cmd_async = do_balloon,
- .flags = MONITOR_CMD_ASYNC,
+ .mhandler.cmd = hmp_balloon,
},
STEXI
.args_type = "name:s,up:b",
.params = "name on|off",
.help = "change the link status of a network adapter",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_set_link,
+ .mhandler.cmd = hmp_set_link,
},
STEXI
.args_type = "device:B,password:s",
.params = "block_passwd device password",
.help = "set the password of encrypted block devices",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_block_set_passwd,
+ .mhandler.cmd = hmp_block_passwd,
+ },
+
+STEXI
+@item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+@findex block_set_io_throttle
+Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+ETEXI
+
+ {
+ .name = "block_set_io_throttle",
+ .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
+ .params = "device bps bps_rd bps_wr iops iops_rd iops_wr",
+ .help = "change I/O throttle limits for a block drive",
+ .mhandler.cmd = hmp_block_set_io_throttle,
},
STEXI
.args_type = "protocol:s,password:s,connected:s?",
.params = "protocol password action-if-connected",
.help = "set spice/vnc password",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = set_password,
+ .mhandler.cmd = hmp_set_password,
},
STEXI
.args_type = "protocol:s,time:s",
.params = "protocol time",
.help = "set spice/vnc password expire-time",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = expire_password,
+ .mhandler.cmd = hmp_expire_password,
},
STEXI
@item info pci
show emulated PCI device info
@item info tlb
-show virtual to physical memory mappings (i386, SH4, SPARC, and PPC only)
+show virtual to physical memory mappings (i386, SH4, SPARC, PPC, and Xtensa only)
@item info mem
show the active virtual memory mappings (i386 only)
@item info jit
projects / qemu.git / blobdiff