#define DPRINTF(fmt, args...) \
do { printf("TIMER: " fmt , ##args); } while (0)
#else
-#define DPRINTF(fmt, args...)
+#define DPRINTF(fmt, args...) do {} while (0)
#endif
/*
uint32_t count, counthigh, reached;
uint64_t limit;
// processor only
- int running;
+ uint32_t running;
struct SLAVIO_TIMERState *master;
- int slave_index;
+ uint32_t slave_index;
// system only
+ uint32_t num_slaves;
struct SLAVIO_TIMERState *slave[MAX_CPUS];
uint32_t slave_mode;
} SLAVIO_TIMERState;
-#define TIMER_MAXADDR 0x1f
#define SYS_TIMER_SIZE 0x14
#define CPU_TIMER_SIZE 0x10
// Convert from ptimer countdown units
static void slavio_timer_get_out(SLAVIO_TIMERState *s)
{
- uint64_t count;
+ uint64_t count, limit;
+
+ if (s->limit == 0) /* free-run processor or system counter */
+ limit = TIMER_MAX_COUNT32;
+ else
+ limit = s->limit;
+
+ if (s->timer)
+ count = limit - PERIODS_TO_LIMIT(ptimer_get_count(s->timer));
+ else
+ count = 0;
- count = s->limit - PERIODS_TO_LIMIT(ptimer_get_count(s->timer));
DPRINTF("get_out: limit %" PRIx64 " count %x%08x\n", s->limit,
s->counthigh, s->count);
s->count = count & TIMER_COUNT_MASK32;
slavio_timer_get_out(s);
DPRINTF("callback: count %x%08x\n", s->counthigh, s->count);
- if (!slavio_timer_is_user(s)) {
- s->reached = TIMER_REACHED;
+ s->reached = TIMER_REACHED;
+ if (!slavio_timer_is_user(s))
qemu_irq_raise(s->irq);
- }
}
static uint32_t slavio_timer_mem_readl(void *opaque, target_phys_addr_t addr)
SLAVIO_TIMERState *s = opaque;
uint32_t saddr, ret;
- saddr = (addr & TIMER_MAXADDR) >> 2;
+ saddr = addr >> 2;
switch (saddr) {
case TIMER_LIMIT:
// read limit (system counter mode) or read most signifying
if (slavio_timer_is_user(s)) {
// read user timer MSW
slavio_timer_get_out(s);
- ret = s->counthigh;
+ ret = s->counthigh | s->reached;
} else {
// read limit
// clear irq
// of counter (user mode)
slavio_timer_get_out(s);
if (slavio_timer_is_user(s)) // read user timer LSW
- ret = s->count & TIMER_COUNT_MASK32;
+ ret = s->count & TIMER_MAX_COUNT64;
else // read limit
ret = (s->count & TIMER_MAX_COUNT32) | s->reached;
break;
{
SLAVIO_TIMERState *s = opaque;
uint32_t saddr;
- int reload = 0;
DPRINTF("write " TARGET_FMT_plx " %08x\n", addr, val);
- saddr = (addr & TIMER_MAXADDR) >> 2;
+ saddr = addr >> 2;
switch (saddr) {
case TIMER_LIMIT:
if (slavio_timer_is_user(s)) {
+ uint64_t count;
+
// set user counter MSW, reset counter
- qemu_irq_lower(s->irq);
s->limit = TIMER_MAX_COUNT64;
- DPRINTF("processor %d user timer reset\n", s->slave_index);
- ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 1);
+ s->counthigh = val & (TIMER_MAX_COUNT64 >> 32);
+ s->reached = 0;
+ count = ((uint64_t)s->counthigh << 32) | s->count;
+ DPRINTF("processor %d user timer set to %016llx\n", s->slave_index,
+ count);
+ if (s->timer)
+ ptimer_set_count(s->timer, LIMIT_TO_PERIODS(s->limit - count));
} else {
// set limit, reset counter
qemu_irq_lower(s->irq);
s->limit = val & TIMER_MAX_COUNT32;
- if (!s->limit)
- s->limit = TIMER_MAX_COUNT32;
- ptimer_set_limit(s->timer, s->limit >> 9, 1);
+ if (s->timer) {
+ if (s->limit == 0) /* free-run */
+ ptimer_set_limit(s->timer,
+ LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 1);
+ else
+ ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 1);
+ }
}
break;
case TIMER_COUNTER:
if (slavio_timer_is_user(s)) {
+ uint64_t count;
+
// set user counter LSW, reset counter
- qemu_irq_lower(s->irq);
s->limit = TIMER_MAX_COUNT64;
- DPRINTF("processor %d user timer reset\n", s->slave_index);
- ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 1);
+ s->count = val & TIMER_MAX_COUNT64;
+ s->reached = 0;
+ count = ((uint64_t)s->counthigh) << 32 | s->count;
+ DPRINTF("processor %d user timer set to %016llx\n", s->slave_index,
+ count);
+ if (s->timer)
+ ptimer_set_count(s->timer, LIMIT_TO_PERIODS(s->limit - count));
} else
DPRINTF("not user timer\n");
break;
case TIMER_COUNTER_NORST:
// set limit without resetting counter
s->limit = val & TIMER_MAX_COUNT32;
- if (!s->limit)
- s->limit = TIMER_MAX_COUNT32;
- ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), reload);
+ if (s->timer) {
+ if (s->limit == 0) /* free-run */
+ ptimer_set_limit(s->timer,
+ LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 0);
+ else
+ ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 0);
+ }
break;
case TIMER_STATUS:
if (slavio_timer_is_user(s)) {
// start/stop user counter
if ((val & 1) && !s->running) {
DPRINTF("processor %d user timer started\n", s->slave_index);
- ptimer_run(s->timer, 0);
+ if (s->timer)
+ ptimer_run(s->timer, 0);
s->running = 1;
} else if (!(val & 1) && s->running) {
DPRINTF("processor %d user timer stopped\n", s->slave_index);
- ptimer_stop(s->timer);
+ if (s->timer)
+ ptimer_stop(s->timer);
s->running = 0;
}
}
if (s->master == NULL) {
unsigned int i;
- for (i = 0; i < MAX_CPUS; i++) {
- if (val & (1 << i)) {
- qemu_irq_lower(s->slave[i]->irq);
- s->slave[i]->limit = -1ULL;
- }
- if ((val & (1 << i)) != (s->slave_mode & (1 << i))) {
- ptimer_stop(s->slave[i]->timer);
- ptimer_set_limit(s->slave[i]->timer,
- LIMIT_TO_PERIODS(s->slave[i]->limit), 1);
- DPRINTF("processor %d timer changed\n",
- s->slave[i]->slave_index);
- ptimer_run(s->slave[i]->timer, 0);
+ for (i = 0; i < s->num_slaves; i++) {
+ unsigned int processor = 1 << i;
+
+ // check for a change in timer mode for this processor
+ if ((val & processor) != (s->slave_mode & processor)) {
+ if (val & processor) { // counter -> user timer
+ qemu_irq_lower(s->slave[i]->irq);
+ // counters are always running
+ ptimer_stop(s->slave[i]->timer);
+ s->slave[i]->running = 0;
+ // user timer limit is always the same
+ s->slave[i]->limit = TIMER_MAX_COUNT64;
+ ptimer_set_limit(s->slave[i]->timer,
+ LIMIT_TO_PERIODS(s->slave[i]->limit),
+ 1);
+ // set this processors user timer bit in config
+ // register
+ s->slave_mode |= processor;
+ DPRINTF("processor %d changed from counter to user "
+ "timer\n", s->slave[i]->slave_index);
+ } else { // user timer -> counter
+ // stop the user timer if it is running
+ if (s->slave[i]->running)
+ ptimer_stop(s->slave[i]->timer);
+ // start the counter
+ ptimer_run(s->slave[i]->timer, 0);
+ s->slave[i]->running = 1;
+ // clear this processors user timer bit in config
+ // register
+ s->slave_mode &= ~processor;
+ DPRINTF("processor %d changed from user timer to "
+ "counter\n", s->slave[i]->slave_index);
+ }
}
}
- s->slave_mode = val & ((1 << MAX_CPUS) - 1);
} else
DPRINTF("not system timer\n");
break;
}
static CPUReadMemoryFunc *slavio_timer_mem_read[3] = {
- slavio_timer_mem_readl,
- slavio_timer_mem_readl,
+ NULL,
+ NULL,
slavio_timer_mem_readl,
};
static CPUWriteMemoryFunc *slavio_timer_mem_write[3] = {
- slavio_timer_mem_writel,
- slavio_timer_mem_writel,
+ NULL,
+ NULL,
slavio_timer_mem_writel,
};
qemu_put_be64s(f, &s->limit);
qemu_put_be32s(f, &s->count);
qemu_put_be32s(f, &s->counthigh);
- qemu_put_be32(f, 0); // Was irq
qemu_put_be32s(f, &s->reached);
qemu_put_be32s(f, &s->running);
- qemu_put_be32s(f, 0); // Was mode
- qemu_put_ptimer(f, s->timer);
+ if (s->timer)
+ qemu_put_ptimer(f, s->timer);
}
static int slavio_timer_load(QEMUFile *f, void *opaque, int version_id)
{
SLAVIO_TIMERState *s = opaque;
- uint32_t tmp;
- if (version_id != 2)
+ if (version_id != 3)
return -EINVAL;
qemu_get_be64s(f, &s->limit);
qemu_get_be32s(f, &s->count);
qemu_get_be32s(f, &s->counthigh);
- qemu_get_be32s(f, &tmp); // Was irq
qemu_get_be32s(f, &s->reached);
qemu_get_be32s(f, &s->running);
- qemu_get_be32s(f, &tmp); // Was mode
- qemu_get_ptimer(f, s->timer);
+ if (s->timer)
+ qemu_get_ptimer(f, s->timer);
return 0;
}
{
SLAVIO_TIMERState *s = opaque;
- if (slavio_timer_is_user(s))
- s->limit = TIMER_MAX_COUNT64;
- else
- s->limit = TIMER_MAX_COUNT32;
+ s->limit = 0;
s->count = 0;
s->reached = 0;
- ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 1);
- ptimer_run(s->timer, 0);
+ s->slave_mode = 0;
+ if (!s->master || s->slave_index < s->master->num_slaves) {
+ ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 1);
+ ptimer_run(s->timer, 0);
+ }
s->running = 1;
qemu_irq_lower(s->irq);
}
static SLAVIO_TIMERState *slavio_timer_init(target_phys_addr_t addr,
qemu_irq irq,
SLAVIO_TIMERState *master,
- int slave_index)
+ uint32_t slave_index)
{
int slavio_timer_io_memory;
SLAVIO_TIMERState *s;
QEMUBH *bh;
s = qemu_mallocz(sizeof(SLAVIO_TIMERState));
- if (!s)
- return s;
s->irq = irq;
s->master = master;
s->slave_index = slave_index;
- bh = qemu_bh_new(slavio_timer_irq, s);
- s->timer = ptimer_init(bh);
- ptimer_set_period(s->timer, TIMER_PERIOD);
+ if (!master || slave_index < master->num_slaves) {
+ bh = qemu_bh_new(slavio_timer_irq, s);
+ s->timer = ptimer_init(bh);
+ ptimer_set_period(s->timer, TIMER_PERIOD);
+ }
slavio_timer_io_memory = cpu_register_io_memory(0, slavio_timer_mem_read,
slavio_timer_mem_write, s);
else
cpu_register_physical_memory(addr, SYS_TIMER_SIZE,
slavio_timer_io_memory);
- register_savevm("slavio_timer", addr, 2, slavio_timer_save,
+ register_savevm("slavio_timer", addr, 3, slavio_timer_save,
slavio_timer_load, s);
qemu_register_reset(slavio_timer_reset, s);
slavio_timer_reset(s);
}
void slavio_timer_init_all(target_phys_addr_t base, qemu_irq master_irq,
- qemu_irq *cpu_irqs)
+ qemu_irq *cpu_irqs, unsigned int num_cpus)
{
SLAVIO_TIMERState *master;
unsigned int i;
master = slavio_timer_init(base + SYS_TIMER_OFFSET, master_irq, NULL, 0);
+ master->num_slaves = num_cpus;
+
for (i = 0; i < MAX_CPUS; i++) {
master->slave[i] = slavio_timer_init(base + (target_phys_addr_t)
CPU_TIMER_OFFSET(i),
projects / qemu.git / blobdiff