+#######################################################################
+# Target-independent parts used in system and user emulation
+universal-obj-y =
+
#######################################################################
# QObject
qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
qobject-obj-y += qerror.o error.o qemu-error.o
+universal-obj-y += $(qobject-obj-y)
+
+#######################################################################
+# QOM
+qom-obj-y = qom/
+
+universal-obj-y += $(qom-obj-y)
+
#######################################################################
# oslib-obj-y is code depending on the OS (win32 vs posix)
oslib-obj-y = osdep.o
block-obj-y += $(coroutine-obj-y) $(qobject-obj-y) $(version-obj-y)
block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
-
-block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
-block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
-block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
-block-nested-y += qed-check.o
-block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
-block-nested-y += stream.o
-block-nested-$(CONFIG_WIN32) += raw-win32.o
-block-nested-$(CONFIG_POSIX) += raw-posix.o
-block-nested-$(CONFIG_LIBISCSI) += iscsi.o
-block-nested-$(CONFIG_CURL) += curl.o
-block-nested-$(CONFIG_RBD) += rbd.o
-
-block-obj-y += $(addprefix block/, $(block-nested-y))
-
-net-obj-y = net.o
-net-nested-y = queue.o checksum.o util.o
-net-nested-y += socket.o
-net-nested-y += dump.o
-net-nested-$(CONFIG_POSIX) += tap.o
-net-nested-$(CONFIG_LINUX) += tap-linux.o
-net-nested-$(CONFIG_WIN32) += tap-win32.o
-net-nested-$(CONFIG_BSD) += tap-bsd.o
-net-nested-$(CONFIG_SOLARIS) += tap-solaris.o
-net-nested-$(CONFIG_AIX) += tap-aix.o
-net-nested-$(CONFIG_HAIKU) += tap-haiku.o
-net-nested-$(CONFIG_SLIRP) += slirp.o
-net-nested-$(CONFIG_VDE) += vde.o
-net-obj-y += $(addprefix net/, $(net-nested-y))
+block-obj-y += block/
ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS)$(CONFIG_PCI),yyy)
# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
# only pull in the actual virtio-9p device if we also enabled virtio.
CONFIG_REALLY_VIRTFS=y
-fsdev-nested-y = qemu-fsdev.o virtio-9p-marshal.o
-else
-fsdev-nested-y = qemu-fsdev-dummy.o
endif
-fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))
######################################################################
# Target independent part of system emulation. The long term path is to
# single QEMU executable should support all CPUs and machines.
common-obj-y = $(block-obj-y) blockdev.o
-common-obj-y += $(net-obj-y)
-common-obj-y += $(qobject-obj-y)
-common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
+common-obj-y += net.o net/
+common-obj-y += qom/
common-obj-y += readline.o console.o cursor.o
common-obj-y += $(oslib-obj-y)
common-obj-$(CONFIG_WIN32) += os-win32.o
common-obj-$(CONFIG_POSIX) += os-posix.o
+common-obj-$(CONFIG_LINUX) += fsdev/
+extra-obj-$(CONFIG_LINUX) += fsdev/
+
common-obj-y += tcg-runtime.o host-utils.o main-loop.o
common-obj-y += irq.o input.o
common-obj-$(CONFIG_PTIMER) += ptimer.o
common-obj-y += scsi-disk.o cdrom.o
common-obj-y += scsi-generic.o scsi-bus.o
common-obj-y += hid.o
-common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
-common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o usb-audio.o
+common-obj-y += usb/core.o usb/bus.o usb/desc.o usb/dev-hub.o
+common-obj-y += usb/host-$(HOST_USB).o
+common-obj-y += usb/dev-hid.o usb/dev-storage.o usb/dev-wacom.o
+common-obj-y += usb/dev-serial.o usb/dev-network.o usb/dev-audio.o
common-obj-$(CONFIG_SSI) += ssi.o
common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
common-obj-$(CONFIG_SD) += sd.o
-common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
-common-obj-y += bt-hci-csr.o
+common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o
+common-obj-y += bt-hci-csr.o usb/dev-bluetooth.o
common-obj-y += buffered_file.o migration.o migration-tcp.o
common-obj-y += qemu-char.o #aio.o
common-obj-y += msmouse.o ps2.o
common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
common-obj-$(CONFIG_WIN32) += version.o
-common-obj-$(CONFIG_SPICE) += ui/spice-core.o ui/spice-input.o ui/spice-display.o spice-qemu-char.o
-
-include $(SRC_PATH)/qom/Makefile
-common-obj-y += $(addprefix qom/, $(qom-y))
-
-audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
-audio-obj-$(CONFIG_SDL) += sdlaudio.o
-audio-obj-$(CONFIG_OSS) += ossaudio.o
-audio-obj-$(CONFIG_SPICE) += spiceaudio.o
-audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
-audio-obj-$(CONFIG_ALSA) += alsaaudio.o
-audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
-audio-obj-$(CONFIG_FMOD) += fmodaudio.o
-audio-obj-$(CONFIG_ESD) += esdaudio.o
-audio-obj-$(CONFIG_PA) += paaudio.o
-audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o
-audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
-audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
-audio-obj-y += wavcapture.o
-common-obj-y += $(addprefix audio/, $(audio-obj-y))
-
-ui-obj-y += keymaps.o
-ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
-ui-obj-$(CONFIG_COCOA) += cocoa.o
-ui-obj-$(CONFIG_CURSES) += curses.o
-vnc-obj-y += vnc.o d3des.o
-vnc-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
-vnc-obj-y += vnc-enc-tight.o vnc-palette.o
-vnc-obj-y += vnc-enc-zrle.o
-vnc-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
-vnc-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
-ifdef CONFIG_VNC_THREAD
-vnc-obj-y += vnc-jobs-async.o
-else
-vnc-obj-y += vnc-jobs-sync.o
-endif
-common-obj-y += $(addprefix ui/, $(ui-obj-y))
-common-obj-$(CONFIG_VNC) += $(addprefix ui/, $(vnc-obj-y))
+common-obj-$(CONFIG_SPICE) += spice-qemu-char.o
+
+common-obj-y += audio/
+common-obj-y += ui/
common-obj-y += iov.o acl.o
common-obj-$(CONFIG_POSIX) += compatfd.o
common-obj-y += notify.o event_notifier.o
common-obj-y += qemu-timer.o qemu-timer-common.o
-slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
-slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
-slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o arp_table.o
-common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
+common-obj-$(CONFIG_SLIRP) += slirp/
# xen backend driver support
common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o
user-obj-y += envlist.o path.o
user-obj-y += tcg-runtime.o host-utils.o
user-obj-y += cutils.o cache-utils.o
+user-obj-y += module.o
+user-obj-y += qemu-user.o
user-obj-y += $(trace-obj-y)
+user-obj-y += qom/
######################################################################
# libhw
hw-obj-y =
hw-obj-y += vl.o loader.o
hw-obj-$(CONFIG_VIRTIO) += virtio-console.o
-hw-obj-y += usb-libhw.o
+hw-obj-y += usb/libhw.o
hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
hw-obj-y += fw_cfg.o
-hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
+hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o pci_bridge_dev.o
hw-obj-$(CONFIG_PCI) += msix.o msi.o
+hw-obj-$(CONFIG_PCI) += shpc.o
+hw-obj-$(CONFIG_PCI) += slotid_cap.o
hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
hw-obj-y += watchdog.o
hw-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
hw-obj-$(CONFIG_PCSPK) += pcspk.o
hw-obj-$(CONFIG_PCKBD) += pckbd.o
-hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o
-hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o
-hw-obj-$(CONFIG_USB_EHCI) += usb-ehci.o
-hw-obj-$(CONFIG_USB_XHCI) += usb-xhci.o
+hw-obj-$(CONFIG_USB_UHCI) += usb/hcd-uhci.o
+hw-obj-$(CONFIG_USB_OHCI) += usb/hcd-ohci.o
+hw-obj-$(CONFIG_USB_EHCI) += usb/hcd-ehci.o
+hw-obj-$(CONFIG_USB_XHCI) += usb/hcd-xhci.o
hw-obj-$(CONFIG_FDC) += fdc.o
hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
hw-obj-$(CONFIG_I82374) += i82374.o
hw-obj-$(CONFIG_HPET) += hpet.o
hw-obj-$(CONFIG_APPLESMC) += applesmc.o
-hw-obj-$(CONFIG_SMARTCARD) += usb-ccid.o ccid-card-passthru.o
+hw-obj-$(CONFIG_SMARTCARD) += usb/dev-smartcard-reader.o ccid-card-passthru.o
hw-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
-hw-obj-$(CONFIG_USB_REDIR) += usb-redir.o
+hw-obj-$(CONFIG_USB_REDIR) += usb/redirect.o
hw-obj-$(CONFIG_I8259) += i8259_common.o i8259.o
# PPC devices
hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
+hw-obj-y += qtest.o
+
# Sound
sound-obj-y =
sound-obj-$(CONFIG_SB16) += sb16.o
libdis-$(CONFIG_S390_DIS) += s390-dis.o
libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o
+libdis-$(CONFIG_LM32_DIS) += lm32-dis.o
######################################################################
# trace
ifeq ($(TRACE_BACKEND),dtrace)
-trace.h: trace.h-timestamp trace-dtrace.h
-else
-trace.h: trace.h-timestamp
+TRACE_H_EXTRA_DEPS=trace-dtrace.h
endif
+trace.h: trace.h-timestamp $(TRACE_H_EXTRA_DEPS)
trace.h-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
- $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -h < $< > $@," GEN trace.h")
+ $(call quiet-command,$(TRACETOOL) \
+ --format=h \
+ --backend=$(TRACE_BACKEND) \
+ < $< > $@," GEN trace.h")
@cmp -s $@ trace.h || cp $@ trace.h
trace.c: trace.c-timestamp
trace.c-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
- $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -c < $< > $@," GEN trace.c")
+ $(call quiet-command,$(TRACETOOL) \
+ --format=c \
+ --backend=$(TRACE_BACKEND) \
+ < $< > $@," GEN trace.c")
@cmp -s $@ trace.c || cp $@ trace.c
trace.o: trace.c $(GENERATED_HEADERS)
# rule file. So we use '.dtrace' instead
trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
- $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -d < $< > $@," GEN trace-dtrace.dtrace")
+ $(call quiet-command,$(TRACETOOL) \
+ --format=d \
+ --backend=$(TRACE_BACKEND) \
+ < $< > $@," GEN trace-dtrace.dtrace")
@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
- $(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o")
+ $(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o")
ifeq ($(LIBTOOL),)
trace-dtrace.lo: trace-dtrace.dtrace
trace-obj-y = trace.o
endif
-trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o
-
-trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
+trace-obj-$(CONFIG_TRACE_DEFAULT) += trace/default.o
+trace-obj-$(CONFIG_TRACE_SIMPLE) += trace/simple.o
trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
-
-trace-nested-$(CONFIG_TRACE_STDERR) += stderr.o
-
-trace-nested-y += control.o
-
-trace-obj-y += $(addprefix trace/, $(trace-nested-y))
+trace-obj-$(CONFIG_TRACE_STDERR) += trace/stderr.o
+trace-obj-y += trace/control.o
$(trace-obj-y): $(GENERATED_HEADERS)
######################################################################
# qapi
-qapi-nested-y = qapi-visit-core.o qapi-dealloc-visitor.o qmp-input-visitor.o
-qapi-nested-y += qmp-output-visitor.o qmp-registry.o qmp-dispatch.o
-qapi-nested-y += string-input-visitor.o string-output-visitor.o
-qapi-obj-y = $(addprefix qapi/, $(qapi-nested-y))
+qapi-obj-y = qapi/
-common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o $(qapi-obj-y)
+common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o
common-obj-y += qmp.o hmp.o
+universal-obj-y += $(qapi-obj-y)
+
######################################################################
# guest agent
QEMU_CFLAGS+=$(GLIB_CFLAGS)
+nested-vars += \
+ block-obj-y \
+ qom-obj-y \
+ qapi-obj-y \
+ user-obj-y \
+ common-obj-y \
+ extra-obj-y
+dummy := $(call unnest-vars)
projects / qemu.git / blobdiff