TARGET_ARCH2=armeb
endif
endif
+ifeq ($(TARGET_ARCH),sh4)
+ ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
+ TARGET_ARCH2=sh4eb
+ endif
+endif
ifeq ($(TARGET_ARCH),mips)
ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=mipsel
endif
ifeq ($(ARCH),i386)
-CFLAGS+=-fomit-frame-pointer
-OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2
+HELPER_CFLAGS:=$(CFLAGS) -fomit-frame-pointer
+OP_CFLAGS:=$(CFLAGS) -mpreferred-stack-boundary=2 -fomit-frame-pointer
ifeq ($(HAVE_GCC3_OPTIONS),yes)
OP_CFLAGS+= -falign-functions=0 -fno-gcse
else
endif
ifeq ($(ARCH),sparc)
-CFLAGS+=-m32 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
+ifeq ($(CONFIG_SOLARIS),yes)
+CFLAGS+=-mcpu=ultrasparc -m32 -ffixed-g2 -ffixed-g3
+LDFLAGS+=-m32
+OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -fno-omit-frame-pointer -ffixed-i0
+else
+CFLAGS+=-mcpu=ultrasparc -m32 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
LDFLAGS+=-m32
OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
HELPER_CFLAGS=$(CFLAGS) -ffixed-i0 -mflat
# -static is used to avoid g1/g3 usage by the dynamic linker
LDFLAGS+=-Wl,-T,$(SRC_PATH)/sparc.ld -static
endif
+endif
ifeq ($(ARCH),sparc64)
-CFLAGS+=-m64 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
+CFLAGS+=-mcpu=ultrasparc -m64 -ffixed-g1 -ffixed-g4 -ffixed-g5 -ffixed-g7
LDFLAGS+=-m64
+LDFLAGS+=-Wl,-T,$(SRC_PATH)/sparc64.ld
OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
endif
main.o: CFLAGS+=-p
endif
-OBJS= elfload.o main.o syscall.o mmap.o signal.o path.o osdep.o thunk.o
+OBJS= main.o syscall.o mmap.o signal.o path.o osdep.o thunk.o \
+ elfload.o linuxload.o
+ifdef TARGET_HAS_BFLT
+OBJS+= flatload.o
+endif
+
ifeq ($(TARGET_ARCH), i386)
OBJS+= vm86.o
endif
nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
nwfpe/double_cpdo.o nwfpe/extended_cpdo.o arm-semi.o
endif
+ifeq ($(TARGET_ARCH), m68k)
+OBJS+= m68k-sim.o m68k-semi.o
+endif
SRCS:= $(OBJS:.o=.c)
OBJS+= libqemu.a
LIBOBJS+= op_helper.o helper.o
endif
+ifeq ($(TARGET_BASE_ARCH), m68k)
+LIBOBJS+= helper.o
+endif
+
# NOTE: the disassembler code is only needed for debugging
LIBOBJS+=disas.o
ifeq ($(findstring i386, $(TARGET_ARCH) $(ARCH)),i386)
endif
# must use static linking to avoid leaving stuff in virtual address space
-VL_OBJS=vl.o osdep.o block.o readline.o monitor.o pci.o console.o loader.o
-VL_OBJS+=block-cow.o block-qcow.o aes.o block-vmdk.o block-cloop.o block-dmg.o block-bochs.o block-vpc.o block-vvfat.o
+VL_OBJS=vl.o osdep.o readline.o monitor.o pci.o console.o loader.o isa_mmio.o
+VL_OBJS+=block.o block-raw.o
+VL_OBJS+=block-cow.o block-qcow.o aes.o block-vmdk.o block-cloop.o block-dmg.o block-bochs.o block-vpc.o block-vvfat.o block-qcow2.o
ifdef CONFIG_WIN32
VL_OBJS+=tap-win32.o
endif
ifdef CONFIG_ADLIB
SOUND_HW += fmopl.o adlib.o
endif
+AUDIODRV+= wavcapture.o
+
+# SCSI layer
+VL_OBJS+= scsi-disk.o cdrom.o lsi53c895a.o
# USB layer
-VL_OBJS+= usb.o usb-hub.o usb-uhci.o usb-linux.o usb-hid.o
+VL_OBJS+= usb.o usb-hub.o usb-linux.o usb-hid.o usb-ohci.o usb-msd.o
# PCI network cards
-VL_OBJS+= ne2000.o rtl8139.o
+VL_OBJS+= ne2000.o rtl8139.o pcnet.o
ifeq ($(TARGET_BASE_ARCH), i386)
# Hardware support
VL_OBJS+= ide.o pckbd.o ps2.o vga.o $(SOUND_HW) dma.o $(AUDIODRV)
VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
-VL_OBJS+= cirrus_vga.o mixeng.o apic.o parallel.o
+VL_OBJS+= cirrus_vga.o mixeng.o apic.o parallel.o acpi.o piix_pci.o
+VL_OBJS+= usb-uhci.o
DEFINES += -DHAS_AUDIO
endif
ifeq ($(TARGET_BASE_ARCH), ppc)
VL_OBJS+= ppc.o ide.o pckbd.o ps2.o vga.o $(SOUND_HW) dma.o $(AUDIODRV)
VL_OBJS+= mc146818rtc.o serial.o i8259.o i8254.o fdc.o m48t59.o
VL_OBJS+= ppc_prep.o ppc_chrp.o cuda.o adb.o openpic.o heathrow_pic.o mixeng.o
+VL_OBJS+= grackle_pci.o prep_pci.o unin_pci.o
DEFINES += -DHAS_AUDIO
endif
ifeq ($(TARGET_ARCH), mips)
-VL_OBJS+= mips_r4k.o dma.o vga.o serial.o i8254.o i8259.o
-#VL_OBJS+= #ide.o pckbd.o fdc.o m48t59.o
+VL_OBJS+= mips_r4k.o mips_timer.o dma.o vga.o serial.o i8254.o i8259.o ide.o
+#VL_OBJS+= #pckbd.o fdc.o m48t59.o
endif
ifeq ($(TARGET_BASE_ARCH), sparc)
ifeq ($(TARGET_ARCH), sparc64)
-VL_OBJS+= sun4u.o ide.o pckbd.o ps2.o vga.o
+VL_OBJS+= sun4u.o ide.o pckbd.o ps2.o vga.o apb_pci.o
VL_OBJS+= fdc.o mc146818rtc.o serial.o m48t59.o
VL_OBJS+= cirrus_vga.o parallel.o
else
-VL_OBJS+= sun4m.o tcx.o lance.o iommu.o m48t59.o slavio_intctl.o
-VL_OBJS+= slavio_timer.o slavio_serial.o slavio_misc.o fdc.o esp.o
+VL_OBJS+= sun4m.o tcx.o pcnet.o iommu.o m48t59.o slavio_intctl.o
+VL_OBJS+= slavio_timer.o slavio_serial.o slavio_misc.o fdc.o esp.o sparc32_dma.o
+VL_OBJS+= cs4231.o
endif
endif
ifeq ($(TARGET_BASE_ARCH), arm)
VL_OBJS+= integratorcp.o versatilepb.o ps2.o smc91c111.o arm_pic.o arm_timer.o
VL_OBJS+= arm_boot.o pl011.o pl050.o pl080.o pl110.o pl190.o
+VL_OBJS+= versatile_pci.o
+VL_OBJS+= arm_gic.o realview.o arm_sysctl.o
endif
ifeq ($(TARGET_BASE_ARCH), sh4)
VL_OBJS+= shix.o sh7750.o sh7750_regnames.o tc58128.o
ifndef CONFIG_DARWIN
ifndef CONFIG_WIN32
ifndef CONFIG_SOLARIS
-VL_LIBS=-lutil
+VL_LIBS=-lutil -lrt
endif
endif
endif
VL_LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/ia64.ld
endif
+ifeq ($(ARCH),sparc64)
+VL_LDFLAGS+=-m64
+VL_LDFLAGS+=-Wl,-T,$(SRC_PATH)/sparc64.ld
+endif
+
ifdef CONFIG_WIN32
SDL_LIBS := $(filter-out -mwindows, $(SDL_LIBS)) -mconsole
endif
op.o: op.c
$(CC) $(OP_CFLAGS) $(DEFINES) -c -o $@ $<
+# HELPER_CFLAGS is used for all the code compiled with static register
+# variables
+ifeq ($(TARGET_BASE_ARCH), i386)
+# XXX: rename helper.c to op_helper.c
helper.o: helper.c
$(CC) $(HELPER_CFLAGS) $(DEFINES) -c -o $@ $<
+else
+op_helper.o: op_helper.c
+ $(CC) $(HELPER_CFLAGS) $(DEFINES) -c -o $@ $<
+endif
+
+cpu-exec.o: cpu-exec.c
+ $(CC) $(HELPER_CFLAGS) $(DEFINES) -c -o $@ $<
+
+# Note: this is a workaround. The real fix is to avoid compiling
+# cpu_signal_handler() in cpu-exec.c.
+signal.o: signal.c
+ $(CC) $(HELPER_CFLAGS) $(DEFINES) -c -o $@ $<
ifeq ($(TARGET_BASE_ARCH), i386)
op.o: op.c opreg_template.h ops_template.h ops_template_mem.h ops_mem.h ops_sse.h
tc58128.o: tc58128.c
endif
+$(OBJS) $(LIBOBJS) $(VL_OBJS): config.h ../config-host.h
+
%.o: %.c
$(CC) $(CFLAGS) $(DEFINES) -c -o $@ $<
projects / qemu.git / blobdiff