#
# @snapshots: #optional list of VM snapshots
#
+# @backing-image: #optional info of the backing image (since 1.6)
+#
# Since: 1.3
#
##
'*actual-size': 'int', 'virtual-size': 'int',
'*cluster-size': 'int', '*encrypted': 'bool',
'*backing-filename': 'str', '*full-backing-filename': 'str',
- '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'] } }
+ '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'],
+ '*backing-image': 'ImageInfo' } }
##
# @ImageCheck:
#
# Since: 1.4
##
-{ 'enum': 'DataFormat'
+{ 'enum': 'DataFormat',
'data': [ 'utf8', 'base64' ] }
##
# @dirty-pages-rate: number of pages dirtied by second by the
# guest (since 1.3)
#
+# @mbps: throughput in megabits/sec. (since 1.6)
+#
# Since: 0.14.0
##
{ 'type': 'MigrationStats',
'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
- 'normal-bytes': 'int', 'dirty-pages-rate' : 'int' } }
+ 'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
+ 'mbps' : 'number' } }
##
# @XBZRLECacheStats
# expected downtime in milliseconds for the guest in last walk
# of the dirty bitmap. (since 1.3)
#
+# @setup-time: #optional amount of setup time in milliseconds _before_ the
+# iterations begin but _after_ the QMP command is issued. This is designed
+# to provide an accounting of any activities (such as RDMA pinning) which
+# may be expensive, but do not actually occur during the iterative
+# migration rounds themselves. (since 1.6)
+#
# Since: 0.14.0
##
{ 'type': 'MigrationInfo',
'*xbzrle-cache': 'XBZRLECacheStats',
'*total-time': 'int',
'*expected-downtime': 'int',
- '*downtime': 'int'} }
+ '*downtime': 'int',
+ '*setup-time': 'int'} }
##
# @query-migrate
# This feature allows us to minimize migration traffic for certain work
# loads, by sending compressed difference of the pages
#
+# @x-rdma-pin-all: Controls whether or not the entire VM memory footprint is
+# mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage.
+# Disabled by default. Experimental: may (or may not) be renamed after
+# further testing is complete. (since 1.6)
+#
+# @zero-blocks: During storage migration encode blocks of zeroes efficiently. This
+# essentially saves 1MB of zeroes per block on the wire. Enabling requires
+# source and target VM to support this feature. To enable it is sufficient
+# to enable the capability on the source VM. The feature is disabled by
+# default. (since 1.6)
+#
+# @auto-converge: If enabled, QEMU will automatically throttle down the guest
+# to speed up convergence of RAM migration. (since 1.6)
+#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
- 'data': ['xbzrle'] }
+ 'data': ['xbzrle', 'x-rdma-pin-all', 'auto-converge', 'zero-blocks'] }
##
# @MigrationCapabilityStatus
#
# @iops_wr: write I/O operations per second is specified
#
+# @image: the info of image used (since: 1.6)
+#
+# @bps_max: #optional total max in bytes (Since 1.7)
+#
+# @bps_rd_max: #optional read max in bytes (Since 1.7)
+#
+# @bps_wr_max: #optional write max in bytes (Since 1.7)
+#
+# @iops_max: #optional total I/O operations max (Since 1.7)
+#
+# @iops_rd_max: #optional read I/O operations max (Since 1.7)
+#
+# @iops_wr_max: #optional write I/O operations max (Since 1.7)
+#
+# @iops_size: #optional an I/O size in bytes (Since 1.7)
+#
# Since: 0.14.0
#
# Notes: This interface is only found in @BlockInfo.
'*backing_file': 'str', 'backing_file_depth': 'int',
'encrypted': 'bool', 'encryption_key_missing': 'bool',
'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
- 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int'} }
+ 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
+ 'image': 'ImageInfo',
+ '*bps_max': 'int', '*bps_rd_max': 'int',
+ '*bps_wr_max': 'int', '*iops_max': 'int',
+ '*iops_rd_max': 'int', '*iops_wr_max': 'int',
+ '*iops_size': 'int' } }
##
# @BlockDeviceIoStatus:
##
{ 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] }
+##
+# @BlockDeviceMapEntry:
+#
+# Entry in the metadata map of the device (returned by "qemu-img map")
+#
+# @start: Offset in the image of the first byte described by this entry
+# (in bytes)
+#
+# @length: Length of the range described by this entry (in bytes)
+#
+# @depth: Number of layers (0 = top image, 1 = top image's backing file, etc.)
+# before reaching one for which the range is allocated. The value is
+# in the range 0 to the depth of the image chain - 1.
+#
+# @zero: the sectors in this range read as zeros
+#
+# @data: reading the image will actually read data from a file (in particular,
+# if @offset is present this means that the sectors are not simply
+# preallocated, but contain actual data in raw format)
+#
+# @offset: if present, the image file stores the data for this range in
+# raw format at the given offset.
+#
+# Since 1.7
+##
+{ 'type': 'BlockDeviceMapEntry',
+ 'data': { 'start': 'int', 'length': 'int', 'depth': 'int', 'zero': 'bool',
+ 'data': 'bool', '*offset': 'int' } }
+
##
# @BlockDirtyInfo:
#
#
# Since: 1.1
##
-{ 'enum': 'NewImageMode'
+{ 'enum': 'NewImageMode',
'data': [ 'existing', 'absolute-paths' ] }
##
'data': { 'device': 'str', 'snapshot-file': 'str', '*format': 'str',
'*mode': 'NewImageMode' } }
+##
+# @DriveBackup
+#
+# @device: the name of the device which should be copied.
+#
+# @target: the target of the new image. If the file exists, or if it
+# is a device, the existing file/device will be used as the new
+# destination. If it does not exist, a new file will be created.
+#
+# @format: #optional the format of the new destination, default is to
+# probe if @mode is 'existing', else the format of the source
+#
+# @sync: what parts of the disk image should be copied to the destination
+# (all the disk, only the sectors allocated in the topmost image, or
+# only new I/O).
+#
+# @mode: #optional whether and how QEMU should create a new image, default is
+# 'absolute-paths'.
+#
+# @speed: #optional the maximum speed, in bytes per second
+#
+# @on-source-error: #optional the action to take on an error on the source,
+# default 'report'. 'stop' and 'enospc' can only be used
+# if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+# default 'report' (no limitations, since this applies to
+# a different block device than @device).
+#
+# Note that @on-source-error and @on-target-error only affect background I/O.
+# If an error occurs during a guest write request, the device's rerror/werror
+# actions will be used.
+#
+# Since: 1.6
+##
+{ 'type': 'DriveBackup',
+ 'data': { 'device': 'str', 'target': 'str', '*format': 'str',
+ 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
+ '*speed': 'int',
+ '*on-source-error': 'BlockdevOnError',
+ '*on-target-error': 'BlockdevOnError' } }
+
+##
+# @Abort
+#
+# This action can be used to test transaction failure.
+#
+# Since: 1.6
+###
+{ 'type': 'Abort',
+ 'data': { } }
+
##
# @TransactionAction
#
##
{ 'union': 'TransactionAction',
'data': {
- 'blockdev-snapshot-sync': 'BlockdevSnapshot'
+ 'blockdev-snapshot-sync': 'BlockdevSnapshot',
+ 'drive-backup': 'DriveBackup',
+ 'abort': 'Abort'
} }
##
#
# Generates a synchronous snapshot of a block device.
#
-# @device: the name of the device to generate the snapshot from.
-#
-# @snapshot-file: the target of the new image. If the file exists, or if it
-# is a device, the snapshot will be created in the existing
-# file/device. If does not exist, a new file will be created.
-#
-# @format: #optional the format of the snapshot image, default is 'qcow2'.
-#
-# @mode: #optional whether and how QEMU should create a new image, default is
-# 'absolute-paths'.
+# For the arguments, see the documentation of BlockdevSnapshot.
#
# Returns: nothing on success
# If @device is not a valid block device, DeviceNotFound
# Since 0.14.0
##
{ 'command': 'blockdev-snapshot-sync',
- 'data': { 'device': 'str', 'snapshot-file': 'str', '*format': 'str',
- '*mode': 'NewImageMode'} }
+ 'data': 'BlockdevSnapshot' }
##
# @human-monitor-command:
'data': { 'device': 'str', '*base': 'str', 'top': 'str',
'*speed': 'int' } }
+##
+# @drive-backup
+#
+# Start a point-in-time copy of a block device to a new destination. The
+# status of ongoing drive-backup operations can be checked with
+# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
+# The operation can be stopped before it has completed using the
+# block-job-cancel command.
+#
+# For the arguments, see the documentation of DriveBackup.
+#
+# Returns: nothing on success
+# If @device is not a valid block device, DeviceNotFound
+#
+# Since 1.6
+##
+{ 'command': 'drive-backup', 'data': 'DriveBackup' }
+
##
# @drive-mirror
#
#
# @iops_wr: write I/O operations per second
#
+# @bps_max: #optional total max in bytes (Since 1.7)
+#
+# @bps_rd_max: #optional read max in bytes (Since 1.7)
+#
+# @bps_wr_max: #optional write max in bytes (Since 1.7)
+#
+# @iops_max: #optional total I/O operations max (Since 1.7)
+#
+# @iops_rd_max: #optional read I/O operations max (Since 1.7)
+#
+# @iops_wr_max: #optional write I/O operations max (Since 1.7)
+#
+# @iops_size: #optional an I/O size in bytes (Since 1.7)
+#
# Returns: Nothing on success
# If @device is not a valid block device, DeviceNotFound
#
##
{ 'command': 'block_set_io_throttle',
'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
- 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int' } }
+ 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
+ '*bps_max': 'int', '*bps_rd_max': 'int',
+ '*bps_wr_max': 'int', '*iops_max': 'int',
+ '*iops_rd_max': 'int', '*iops_wr_max': 'int',
+ '*iops_size': 'int' } }
##
# @block-stream:
##
{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
-##
-# @TargetType
-#
-# Target CPU emulation type
-#
-# These parameters correspond to the softmmu binary CPU name that is currently
-# running.
-#
-# Since: 1.2.0
-##
-{ 'enum': 'TargetType',
- 'data': [ 'alpha', 'arm', 'cris', 'i386', 'lm32', 'm68k', 'microblazeel',
- 'microblaze', 'mips64el', 'mips64', 'mipsel', 'mips', 'moxie',
- 'or32', 'ppc64', 'ppcemb', 'ppc', 's390x', 'sh4eb', 'sh4',
- 'sparc64', 'sparc', 'unicore32', 'x86_64', 'xtensaeb', 'xtensa' ] }
-
##
# @TargetInfo:
#
# Since: 1.2.0
##
{ 'type': 'TargetInfo',
- 'data': { 'arch': 'TargetType' } }
+ 'data': { 'arch': 'str' } }
##
# @query-target:
# @addr: socket address to listen on (server=true)
# or connect to (server=false)
# @server: #optional create server socket (default: true)
-# @wait: #optional wait for connect (not used for server
-# sockets, default: false)
+# @wait: #optional wait for incoming connection on server
+# sockets (default: false).
# @nodelay: #optional set TCP_NODELAY socket option (default: false)
-# @telnet: #optional enable telnet protocol (default: false)
+# @telnet: #optional enable telnet protocol on server
+# sockets (default: false)
#
# Since: 1.4
##
'*rows' : 'int' } }
##
-# @ChardevMemory:
+# @ChardevRingbuf:
#
-# Configuration info for memory chardevs
+# Configuration info for ring buffer chardevs.
#
-# @size: #optional Ringbuffer size, must be power of two, default is 65536
+# @size: #optional ring buffer size, must be power of two, default is 65536
#
# Since: 1.5
##
-{ 'type': 'ChardevMemory', 'data': { '*size' : 'int' } }
+{ 'type': 'ChardevRingbuf', 'data': { '*size' : 'int' } }
##
# @ChardevBackend:
'spicevmc' : 'ChardevSpiceChannel',
'spiceport' : 'ChardevSpicePort',
'vc' : 'ChardevVC',
- 'memory' : 'ChardevMemory' } }
+ 'ringbuf': 'ChardevRingbuf',
+ # next one is just for compatibility
+ 'memory' : 'ChardevRingbuf' } }
##
# @ChardevReturn:
'*cpuid-input-ecx': 'int',
'cpuid-register': 'X86CPURegister32',
'features': 'int' } }
+
+##
+# @RxState:
+#
+# Packets receiving state
+#
+# @normal: filter assigned packets according to the mac-table
+#
+# @none: don't receive any assigned packet
+#
+# @all: receive all assigned packets
+#
+# Since: 1.6
+##
+{ 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] }
+
+##
+# @RxFilterInfo:
+#
+# Rx-filter information for a NIC.
+#
+# @name: net client name
+#
+# @promiscuous: whether promiscuous mode is enabled
+#
+# @multicast: multicast receive state
+#
+# @unicast: unicast receive state
+#
+# @broadcast-allowed: whether to receive broadcast
+#
+# @multicast-overflow: multicast table is overflowed or not
+#
+# @unicast-overflow: unicast table is overflowed or not
+#
+# @main-mac: the main macaddr string
+#
+# @vlan-table: a list of active vlan id
+#
+# @unicast-table: a list of unicast macaddr string
+#
+# @multicast-table: a list of multicast macaddr string
+#
+# Since 1.6
+##
+
+{ 'type': 'RxFilterInfo',
+ 'data': {
+ 'name': 'str',
+ 'promiscuous': 'bool',
+ 'multicast': 'RxState',
+ 'unicast': 'RxState',
+ 'broadcast-allowed': 'bool',
+ 'multicast-overflow': 'bool',
+ 'unicast-overflow': 'bool',
+ 'main-mac': 'str',
+ 'vlan-table': ['int'],
+ 'unicast-table': ['str'],
+ 'multicast-table': ['str'] }}
+
+##
+# @query-rx-filter:
+#
+# Return rx-filter information for all NICs (or for the given NIC).
+#
+# @name: #optional net client name
+#
+# Returns: list of @RxFilterInfo for all NICs (or for the given NIC).
+# Returns an error if the given @name doesn't exist, or given
+# NIC doesn't support rx-filter querying, or given net client
+# isn't a NIC.
+#
+# Since: 1.6
+##
+{ 'command': 'query-rx-filter', 'data': { '*name': 'str' },
+ 'returns': ['RxFilterInfo'] }
projects / qemu.git / blobdiff