*/
#include "hw/usb/hcd-ehci.h"
+#include "trace.h"
/* Capability Registers Base Address - section 2.2 */
#define CAPLENGTH 0x0000 /* 1-byte, 0x0001 reserved */
static void ehci_wakeup(USBPort *port)
{
EHCIState *s = port->opaque;
- uint32_t portsc = s->portsc[port->index];
+ uint32_t *portsc = &s->portsc[port->index];
- if (portsc & PORTSC_POWNER) {
+ if (*portsc & PORTSC_POWNER) {
USBPort *companion = s->companion_ports[port->index];
if (companion->ops->wakeup) {
companion->ops->wakeup(companion);
return;
}
+ if (*portsc & PORTSC_SUSPEND) {
+ trace_usb_ehci_port_wakeup(port->index);
+ *portsc |= PORTSC_FPRES;
+ ehci_raise_irq(s, USBSTS_PCD);
+ }
+
qemu_bh_schedule(s->async_bh);
}
}
}
+ if ((val & PORTSC_SUSPEND) && !(*portsc & PORTSC_SUSPEND)) {
+ trace_usb_ehci_port_suspend(port);
+ }
+ if (!(val & PORTSC_FPRES) && (*portsc & PORTSC_FPRES)) {
+ trace_usb_ehci_port_resume(port);
+ val &= ~PORTSC_SUSPEND;
+ }
+
*portsc &= ~PORTSC_RO_MASK;
*portsc |= val;
trace_usb_ehci_portsc_change(addr + s->portscbase, addr >> 2, *portsc, old);
{
uint32_t cpage, offset, bytes, plen;
dma_addr_t page;
- USBBus *bus = &p->queue->ehci->bus;
- BusState *qbus = BUS(bus);
cpage = get_field(p->qtd.token, QTD_TOKEN_CPAGE);
bytes = get_field(p->qtd.token, QTD_TOKEN_TBYTES);
offset = p->qtd.bufptr[0] & ~QTD_BUFPTR_MASK;
- qemu_sglist_init(&p->sgl, qbus->parent, 5, p->queue->ehci->as);
+ qemu_sglist_init(&p->sgl, p->queue->ehci->device, 5, p->queue->ehci->as);
while (bytes > 0) {
if (cpage > 4) {
return -1;
}
- qemu_sglist_init(&ehci->isgl, DEVICE(ehci), 2, ehci->as);
+ qemu_sglist_init(&ehci->isgl, ehci->device, 2, ehci->as);
if (off + len > 4096) {
/* transfer crosses page border */
uint32_t len2 = off + len - 4096;
.minimum_version_id = 1,
.pre_save = usb_ehci_pre_save,
.post_load = usb_ehci_post_load,
- .fields = (VMStateField[]) {
+ .fields = (VMStateField[]) {
/* mmio registers */
VMSTATE_UINT32(usbcmd, EHCIState),
VMSTATE_UINT32(usbsts, EHCIState),
s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, ehci_frame_timer, s);
s->async_bh = qemu_bh_new(ehci_frame_timer, s);
+ s->device = dev;
qemu_register_reset(ehci_reset, s);
qemu_add_vm_change_state_handler(usb_ehci_vm_state_change, s);