-static int cp15_user_ok(CPUARMState *env, uint32_t insn)
-{
- int cpn = (insn >> 16) & 0xf;
- int cpm = insn & 0xf;
- int op = ((insn >> 5) & 7) | ((insn >> 18) & 0x38);
-
- if (arm_feature(env, ARM_FEATURE_V7) && cpn == 9) {
- /* Performance monitor registers fall into three categories:
- * (a) always UNDEF in usermode
- * (b) UNDEF only if PMUSERENR.EN is 0
- * (c) always read OK and UNDEF on write (PMUSERENR only)
- */
- if ((cpm == 12 && (op < 6)) ||
- (cpm == 13 && (op < 3))) {
- return env->cp15.c9_pmuserenr;
- } else if (cpm == 14 && op == 0 && (insn & ARM_CP_RW_BIT)) {
- /* PMUSERENR, read only */
- return 1;
- }
- return 0;
- }
-
- if (cpn == 13 && cpm == 0) {
- /* TLS register. */
- if (op == 2 || (op == 3 && (insn & ARM_CP_RW_BIT)))
- return 1;
- }
- return 0;
-}
-
-static int cp15_tls_load_store(CPUARMState *env, DisasContext *s, uint32_t insn, uint32_t rd)
-{
- TCGv tmp;
- int cpn = (insn >> 16) & 0xf;
- int cpm = insn & 0xf;
- int op = ((insn >> 5) & 7) | ((insn >> 18) & 0x38);
-
- if (!arm_feature(env, ARM_FEATURE_V6K))
- return 0;
-
- if (!(cpn == 13 && cpm == 0))
- return 0;
-
- if (insn & ARM_CP_RW_BIT) {
- switch (op) {
- case 2:
- tmp = load_cpu_field(cp15.c13_tls1);
- break;
- case 3:
- tmp = load_cpu_field(cp15.c13_tls2);
- break;
- case 4:
- tmp = load_cpu_field(cp15.c13_tls3);
- break;
- default:
- return 0;
- }
- store_reg(s, rd, tmp);
-
- } else {
- tmp = load_reg(s, rd);
- switch (op) {
- case 2:
- store_cpu_field(tmp, cp15.c13_tls1);
- break;
- case 3:
- store_cpu_field(tmp, cp15.c13_tls2);
- break;
- case 4:
- store_cpu_field(tmp, cp15.c13_tls3);
- break;
- default:
- tcg_temp_free_i32(tmp);
- return 0;
- }
- }
- return 1;
-}
-
-/* Disassemble system coprocessor (cp15) instruction. Return nonzero if
- instruction is not defined. */
-static int disas_cp15_insn(CPUARMState *env, DisasContext *s, uint32_t insn)
-{
- uint32_t rd;
- TCGv tmp, tmp2;
-
- /* M profile cores use memory mapped registers instead of cp15. */
- if (arm_feature(env, ARM_FEATURE_M))
- return 1;
-
- if ((insn & (1 << 25)) == 0) {
- if (insn & (1 << 20)) {
- /* mrrc */
- return 1;
- }
- /* mcrr. Used for block cache operations, so implement as no-op. */
- return 0;
- }
- if ((insn & (1 << 4)) == 0) {
- /* cdp */
- return 1;
- }
- /* We special case a number of cp15 instructions which were used
- * for things which are real instructions in ARMv7. This allows
- * them to work in linux-user mode which doesn't provide functional
- * get_cp15/set_cp15 helpers, and is more efficient anyway.
- */
- switch ((insn & 0x0fff0fff)) {
- case 0x0e070f90:
- /* 0,c7,c0,4: Standard v6 WFI (also used in some pre-v6 cores).
- * In v7, this must NOP.
- */
- if (IS_USER(s)) {
- return 1;
- }
- if (!arm_feature(env, ARM_FEATURE_V7)) {
- /* Wait for interrupt. */
- gen_set_pc_im(s->pc);
- s->is_jmp = DISAS_WFI;
- }
- return 0;
- case 0x0e070f58:
- /* 0,c7,c8,2: Not all pre-v6 cores implemented this WFI,
- * so this is slightly over-broad.
- */
- if (!IS_USER(s) && !arm_feature(env, ARM_FEATURE_V6)) {
- /* Wait for interrupt. */
- gen_set_pc_im(s->pc);
- s->is_jmp = DISAS_WFI;
- return 0;
- }
- /* Otherwise continue to handle via helper function.
- * In particular, on v7 and some v6 cores this is one of
- * the VA-PA registers.
- */
- break;
- case 0x0e070f3d:
- /* 0,c7,c13,1: prefetch-by-MVA in v6, NOP in v7 */
- if (arm_feature(env, ARM_FEATURE_V6)) {
- return IS_USER(s) ? 1 : 0;
- }
- break;
- case 0x0e070f95: /* 0,c7,c5,4 : ISB */
- case 0x0e070f9a: /* 0,c7,c10,4: DSB */
- case 0x0e070fba: /* 0,c7,c10,5: DMB */
- /* Barriers in both v6 and v7 */
- if (arm_feature(env, ARM_FEATURE_V6)) {
- return 0;
- }
- break;
- default:
- break;
- }
-
- if (IS_USER(s) && !cp15_user_ok(env, insn)) {
- return 1;
- }
-
- rd = (insn >> 12) & 0xf;
-
- if (cp15_tls_load_store(env, s, insn, rd))
- return 0;
-
- tmp2 = tcg_const_i32(insn);
- if (insn & ARM_CP_RW_BIT) {
- tmp = tcg_temp_new_i32();
- gen_helper_get_cp15(tmp, cpu_env, tmp2);
- /* If the destination register is r15 then sets condition codes. */
- if (rd != 15)
- store_reg(s, rd, tmp);
- else
- tcg_temp_free_i32(tmp);
- } else {
- tmp = load_reg(s, rd);
- gen_helper_set_cp15(cpu_env, tmp2, tmp);
- tcg_temp_free_i32(tmp);
- /* Normally we would always end the TB here, but Linux
- * arch/arm/mach-pxa/sleep.S expects two instructions following
- * an MMU enable to execute from cache. Imitate this behaviour. */
- if (!arm_feature(env, ARM_FEATURE_XSCALE) ||
- (insn & 0x0fff0fff) != 0x0e010f10)
- gen_lookup_tb(s);
- }
- tcg_temp_free_i32(tmp2);
- return 0;
-}
-
projects / qemu.git / blobdiff