ifdef CONFIG_USER_ONLY
# user emulator name
-QEMU_PROG=qemu-$(TARGET_ARCH2)
+QEMU_PROG=qemu-$(TARGET_NAME)
+QEMU_PROG_BUILD = $(QEMU_PROG)
else
# system emulator name
+QEMU_PROG=qemu-system-$(TARGET_NAME)$(EXESUF)
ifneq (,$(findstring -mwindows,$(libs_softmmu)))
# Terminate program name with a 'w' because the linker builds a windows executable.
-QEMU_PROGW=qemu-system-$(TARGET_ARCH2)w$(EXESUF)
-endif # windows executable
-QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
+QEMU_PROGW=qemu-system-$(TARGET_NAME)w$(EXESUF)
+$(QEMU_PROG): $(QEMU_PROGW)
+ $(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG)," GEN $(TARGET_DIR)$(QEMU_PROG)")
+QEMU_PROG_BUILD = $(QEMU_PROGW)
+else
+QEMU_PROG_BUILD = $(QEMU_PROG)
endif
-
-PROGS=$(QEMU_PROG)
-ifdef QEMU_PROGW
-PROGS+=$(QEMU_PROGW)
endif
+
+PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
-stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp
+stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
$(QEMU_PROG).stp-installed: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--format=stap \
- --backend=$(TRACE_BACKEND) \
+ --backends=$(TRACE_BACKENDS) \
--binary=$(bindir)/$(QEMU_PROG) \
- --target-arch=$(TARGET_ARCH) \
+ --target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp-installed")
$(QEMU_PROG).stp: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--format=stap \
- --backend=$(TRACE_BACKEND) \
+ --backends=$(TRACE_BACKENDS) \
--binary=$(realpath .)/$(QEMU_PROG) \
- --target-arch=$(TARGET_ARCH) \
+ --target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp")
+$(QEMU_PROG)-simpletrace.stp: $(SRC_PATH)/trace-events
+ $(call quiet-command,$(TRACETOOL) \
+ --format=simpletrace-stap \
+ --backends=$(TRACE_BACKENDS) \
+ --probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
+ < $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
+
else
stap:
endif
# Dummy command so that make thinks it has done something
@true
-CONFIG_NO_PCI = $(if $(subst n,,$(CONFIG_PCI)),n,y)
-CONFIG_NO_KVM = $(if $(subst n,,$(CONFIG_KVM)),n,y)
-CONFIG_NO_XEN = $(if $(subst n,,$(CONFIG_XEN)),n,y)
-
#########################################################
# cpu emulator library
obj-y = exec.o translate-all.o cpu-exec.o
-obj-y += tcg/tcg.o tcg/optimize.o
+obj-y += tcg/tcg.o tcg/tcg-op.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tci.o
obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
obj-y += fpu/softfloat.o
obj-y += target-$(TARGET_BASE_ARCH)/
obj-y += disas.o
-obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
-obj-$(CONFIG_NO_KVM) += kvm-stub.o
+obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
+obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
+
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decContext.o
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decNumber.o
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal32.o
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal64.o
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal128.o
#########################################################
# Linux user emulator target
ifdef CONFIG_BSD_USER
-QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
+QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
+ -I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
obj-y += bsd-user/
obj-y += gdbstub.o user-exec.o
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
-obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o
-obj-y += qtest.o
+obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
+obj-y += qtest.o bootdevice.o
obj-y += hw/
obj-$(CONFIG_FDT) += device_tree.o
obj-$(CONFIG_KVM) += kvm-all.o
LIBS+=$(libs_softmmu)
# xen support
-obj-$(CONFIG_XEN) += xen-all.o xen-mapcache.o
-obj-$(CONFIG_NO_XEN) += xen-stub.o
+obj-$(CONFIG_XEN) += xen-common.o
+obj-$(CONFIG_XEN_I386) += xen-hvm.o xen-mapcache.o
+obj-$(call lnot,$(CONFIG_XEN)) += xen-common-stub.o
+obj-$(call lnot,$(CONFIG_XEN_I386)) += xen-hvm-stub.o
# Hardware support
-ifeq ($(TARGET_ARCH), sparc64)
+ifeq ($(TARGET_NAME), sparc64)
obj-y += hw/sparc64/
else
obj-y += hw/$(TARGET_BASE_ARCH)/
endif
-main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
-
GENERATED_HEADERS += hmp-commands.h qmp-commands-old.h
endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
-nested-vars += obj-y
+dummy := $(call unnest-vars,,obj-y)
+all-obj-y := $(obj-y)
-# This resolves all nested paths, so it must come last
+target-obj-y :=
+block-obj-y :=
+common-obj-y :=
include $(SRC_PATH)/Makefile.objs
-
-all-obj-y = $(obj-y)
-all-obj-y += $(addprefix ../, $(common-obj-y))
-
-ifndef CONFIG_HAIKU
-LIBS+=-lm
-endif
-
-ifdef QEMU_PROGW
-# The linker builds a windows executable. Make also a console executable.
-$(QEMU_PROGW): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
- $(call LINK,$^)
-$(QEMU_PROG): $(QEMU_PROGW)
- $(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG)," GEN $(TARGET_DIR)$(QEMU_PROG)")
-else
-$(QEMU_PROG): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
- $(call LINK,$^)
-endif
+dummy := $(call unnest-vars,,target-obj-y)
+target-obj-y-save := $(target-obj-y)
+dummy := $(call unnest-vars,.., \
+ block-obj-y \
+ block-obj-m \
+ common-obj-y \
+ common-obj-m)
+target-obj-y := $(target-obj-y-save)
+all-obj-y += $(common-obj-y)
+all-obj-y += $(target-obj-y)
+all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y)
+
+$(QEMU_PROG_BUILD): config-devices.mak
+
+# build either PROG or PROGW
+$(QEMU_PROG_BUILD): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
+ $(call LINK, $(filter-out %.mak, $^))
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
install: all
ifneq ($(PROGS),)
- $(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
-ifneq ($(STRIP),)
- $(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
-endif
+ $(call install-prog,$(PROGS),$(DESTDIR)$(bindir))
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
+ $(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
endif
GENERATED_HEADERS += config-target.h
projects / qemu.git / blobdiff