* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
-#include "vl.h"
+#include "hw.h"
+#include "sun4m.h"
+#include "sysemu.h"
+
/* debug misc */
//#define DEBUG_MISC
uint8_t aux1, aux2;
uint8_t diag, mctrl;
uint32_t sysctrl;
+ uint16_t leds;
+ qemu_irq cpu_halt;
+ qemu_irq fdc_tc;
} MiscState;
#define MISC_SIZE 1
#define SYSCTRL_MAXADDR 3
#define SYSCTRL_SIZE (SYSCTRL_MAXADDR + 1)
+#define LED_MAXADDR 1
+#define LED_SIZE (LED_MAXADDR + 1)
+
+#define MISC_MASK 0x0fff0000
+#define MISC_LEDS 0x01600000
+#define MISC_CFG 0x01800000
+#define MISC_DIAG 0x01a00000
+#define MISC_MDM 0x01b00000
+#define MISC_SYS 0x01f00000
+
+#define AUX1_TC 0x02
+
+#define AUX2_PWROFF 0x01
+#define AUX2_PWRINTCLR 0x02
+#define AUX2_PWRFAIL 0x20
+
+#define CFG_PWRINTEN 0x08
+
+#define SYS_RESET 0x01
+#define SYS_RESETSTAT 0x02
static void slavio_misc_update_irq(void *opaque)
{
MiscState *s = opaque;
- if ((s->aux2 & 0x4) && (s->config & 0x8)) {
+ if ((s->aux2 & AUX2_PWRFAIL) && (s->config & CFG_PWRINTEN)) {
MISC_DPRINTF("Raise IRQ\n");
qemu_irq_raise(s->irq);
} else {
MiscState *s = opaque;
MISC_DPRINTF("Power fail: %d, config: %d\n", power_failing, s->config);
- if (power_failing && (s->config & 0x8)) {
- s->aux2 |= 0x4;
+ if (power_failing && (s->config & CFG_PWRINTEN)) {
+ s->aux2 |= AUX2_PWRFAIL;
} else {
- s->aux2 &= ~0x4;
+ s->aux2 &= ~AUX2_PWRFAIL;
}
slavio_misc_update_irq(s);
}
{
MiscState *s = opaque;
- switch (addr & 0xfff0000) {
- case 0x1800000:
+ switch (addr & MISC_MASK) {
+ case MISC_CFG:
MISC_DPRINTF("Write config %2.2x\n", val & 0xff);
s->config = val & 0xff;
slavio_misc_update_irq(s);
break;
- case 0x1900000:
- MISC_DPRINTF("Write aux1 %2.2x\n", val & 0xff);
- s->aux1 = val & 0xff;
- break;
- case 0x1910000:
- val &= 0x3;
- MISC_DPRINTF("Write aux2 %2.2x\n", val);
- val |= s->aux2 & 0x4;
- if (val & 0x2) // Clear Power Fail int
- val &= 0x1;
- s->aux2 = val;
- if (val & 1)
- qemu_system_shutdown_request();
- slavio_misc_update_irq(s);
- break;
- case 0x1a00000:
+ case MISC_DIAG:
MISC_DPRINTF("Write diag %2.2x\n", val & 0xff);
s->diag = val & 0xff;
break;
- case 0x1b00000:
+ case MISC_MDM:
MISC_DPRINTF("Write modem control %2.2x\n", val & 0xff);
s->mctrl = val & 0xff;
break;
- case 0xa000000:
- MISC_DPRINTF("Write power management %2.2x\n", val & 0xff);
- cpu_interrupt(cpu_single_env, CPU_INTERRUPT_HALT);
+ default:
break;
}
}
MiscState *s = opaque;
uint32_t ret = 0;
- switch (addr & 0xfff0000) {
- case 0x1800000:
+ switch (addr & MISC_MASK) {
+ case MISC_CFG:
ret = s->config;
MISC_DPRINTF("Read config %2.2x\n", ret);
break;
- case 0x1900000:
- ret = s->aux1;
- MISC_DPRINTF("Read aux1 %2.2x\n", ret);
- break;
- case 0x1910000:
- ret = s->aux2;
- MISC_DPRINTF("Read aux2 %2.2x\n", ret);
- break;
- case 0x1a00000:
+ case MISC_DIAG:
ret = s->diag;
MISC_DPRINTF("Read diag %2.2x\n", ret);
break;
- case 0x1b00000:
+ case MISC_MDM:
ret = s->mctrl;
MISC_DPRINTF("Read modem control %2.2x\n", ret);
break;
- case 0xa000000:
- MISC_DPRINTF("Read power management %2.2x\n", ret);
+ default:
break;
}
return ret;
static CPUReadMemoryFunc *slavio_misc_mem_read[3] = {
slavio_misc_mem_readb,
- slavio_misc_mem_readb,
- slavio_misc_mem_readb,
+ NULL,
+ NULL,
};
static CPUWriteMemoryFunc *slavio_misc_mem_write[3] = {
slavio_misc_mem_writeb,
- slavio_misc_mem_writeb,
- slavio_misc_mem_writeb,
+ NULL,
+ NULL,
+};
+
+static void slavio_aux1_mem_writeb(void *opaque, target_phys_addr_t addr,
+ uint32_t val)
+{
+ MiscState *s = opaque;
+
+ MISC_DPRINTF("Write aux1 %2.2x\n", val & 0xff);
+ if (val & AUX1_TC) {
+ // Send a pulse to floppy terminal count line
+ if (s->fdc_tc) {
+ qemu_irq_raise(s->fdc_tc);
+ qemu_irq_lower(s->fdc_tc);
+ }
+ val &= ~AUX1_TC;
+ }
+ s->aux1 = val & 0xff;
+}
+
+static uint32_t slavio_aux1_mem_readb(void *opaque, target_phys_addr_t addr)
+{
+ MiscState *s = opaque;
+ uint32_t ret = 0;
+
+ ret = s->aux1;
+ MISC_DPRINTF("Read aux1 %2.2x\n", ret);
+
+ return ret;
+}
+
+static CPUReadMemoryFunc *slavio_aux1_mem_read[3] = {
+ slavio_aux1_mem_readb,
+ NULL,
+ NULL,
+};
+
+static CPUWriteMemoryFunc *slavio_aux1_mem_write[3] = {
+ slavio_aux1_mem_writeb,
+ NULL,
+ NULL,
+};
+
+static void slavio_aux2_mem_writeb(void *opaque, target_phys_addr_t addr,
+ uint32_t val)
+{
+ MiscState *s = opaque;
+
+ val &= AUX2_PWRINTCLR | AUX2_PWROFF;
+ MISC_DPRINTF("Write aux2 %2.2x\n", val);
+ val |= s->aux2 & AUX2_PWRFAIL;
+ if (val & AUX2_PWRINTCLR) // Clear Power Fail int
+ val &= AUX2_PWROFF;
+ s->aux2 = val;
+ if (val & AUX2_PWROFF)
+ qemu_system_shutdown_request();
+ slavio_misc_update_irq(s);
+}
+
+static uint32_t slavio_aux2_mem_readb(void *opaque, target_phys_addr_t addr)
+{
+ MiscState *s = opaque;
+ uint32_t ret = 0;
+
+ ret = s->aux2;
+ MISC_DPRINTF("Read aux2 %2.2x\n", ret);
+
+ return ret;
+}
+
+static CPUReadMemoryFunc *slavio_aux2_mem_read[3] = {
+ slavio_aux2_mem_readb,
+ NULL,
+ NULL,
+};
+
+static CPUWriteMemoryFunc *slavio_aux2_mem_write[3] = {
+ slavio_aux2_mem_writeb,
+ NULL,
+ NULL,
+};
+
+static void apc_mem_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+ MiscState *s = opaque;
+
+ MISC_DPRINTF("Write power management %2.2x\n", val & 0xff);
+ qemu_irq_raise(s->cpu_halt);
+}
+
+static uint32_t apc_mem_readb(void *opaque, target_phys_addr_t addr)
+{
+ uint32_t ret = 0;
+
+ MISC_DPRINTF("Read power management %2.2x\n", ret);
+ return ret;
+}
+
+static CPUReadMemoryFunc *apc_mem_read[3] = {
+ apc_mem_readb,
+ NULL,
+ NULL,
+};
+
+static CPUWriteMemoryFunc *apc_mem_write[3] = {
+ apc_mem_writeb,
+ NULL,
+ NULL,
};
static uint32_t slavio_sysctrl_mem_readl(void *opaque, target_phys_addr_t addr)
val);
switch (saddr) {
case 0:
- if (val & 1) {
- s->sysctrl = 0x2;
+ if (val & SYS_RESET) {
+ s->sysctrl = SYS_RESETSTAT;
qemu_system_reset_request();
}
break;
}
static CPUReadMemoryFunc *slavio_sysctrl_mem_read[3] = {
- slavio_sysctrl_mem_readl,
- slavio_sysctrl_mem_readl,
+ NULL,
+ NULL,
slavio_sysctrl_mem_readl,
};
static CPUWriteMemoryFunc *slavio_sysctrl_mem_write[3] = {
- slavio_sysctrl_mem_writel,
- slavio_sysctrl_mem_writel,
+ NULL,
+ NULL,
slavio_sysctrl_mem_writel,
};
+static uint32_t slavio_led_mem_readw(void *opaque, target_phys_addr_t addr)
+{
+ MiscState *s = opaque;
+ uint32_t ret = 0, saddr;
+
+ saddr = addr & LED_MAXADDR;
+ switch (saddr) {
+ case 0:
+ ret = s->leds;
+ break;
+ default:
+ break;
+ }
+ MISC_DPRINTF("Read diagnostic LED reg 0x" TARGET_FMT_plx " = %x\n", addr,
+ ret);
+ return ret;
+}
+
+static void slavio_led_mem_writew(void *opaque, target_phys_addr_t addr,
+ uint32_t val)
+{
+ MiscState *s = opaque;
+ uint32_t saddr;
+
+ saddr = addr & LED_MAXADDR;
+ MISC_DPRINTF("Write diagnostic LED reg 0x" TARGET_FMT_plx " = %x\n", addr,
+ val);
+ switch (saddr) {
+ case 0:
+ s->leds = val;
+ break;
+ default:
+ break;
+ }
+}
+
+static CPUReadMemoryFunc *slavio_led_mem_read[3] = {
+ NULL,
+ slavio_led_mem_readw,
+ NULL,
+};
+
+static CPUWriteMemoryFunc *slavio_led_mem_write[3] = {
+ NULL,
+ slavio_led_mem_writew,
+ NULL,
+};
+
static void slavio_misc_save(QEMUFile *f, void *opaque)
{
MiscState *s = opaque;
- int tmp;
+ uint32_t tmp = 0;
uint8_t tmp8;
- tmp = 0;
qemu_put_be32s(f, &tmp); /* ignored, was IRQ. */
qemu_put_8s(f, &s->config);
qemu_put_8s(f, &s->aux1);
static int slavio_misc_load(QEMUFile *f, void *opaque, int version_id)
{
MiscState *s = opaque;
- int tmp;
+ uint32_t tmp;
uint8_t tmp8;
if (version_id != 1)
}
void *slavio_misc_init(target_phys_addr_t base, target_phys_addr_t power_base,
- qemu_irq irq)
+ target_phys_addr_t aux1_base,
+ target_phys_addr_t aux2_base, qemu_irq irq,
+ qemu_irq cpu_halt, qemu_irq **fdc_tc)
{
- int slavio_misc_io_memory;
+ int io;
MiscState *s;
s = qemu_mallocz(sizeof(MiscState));
if (!s)
return NULL;
- /* 8 bit registers */
- slavio_misc_io_memory = cpu_register_io_memory(0, slavio_misc_mem_read,
- slavio_misc_mem_write, s);
- // Slavio control
- cpu_register_physical_memory(base + 0x1800000, MISC_SIZE,
- slavio_misc_io_memory);
- // AUX 1
- cpu_register_physical_memory(base + 0x1900000, MISC_SIZE,
- slavio_misc_io_memory);
- // AUX 2
- cpu_register_physical_memory(base + 0x1910000, MISC_SIZE,
- slavio_misc_io_memory);
- // Diagnostics
- cpu_register_physical_memory(base + 0x1a00000, MISC_SIZE,
- slavio_misc_io_memory);
- // Modem control
- cpu_register_physical_memory(base + 0x1b00000, MISC_SIZE,
- slavio_misc_io_memory);
- // Power management
- cpu_register_physical_memory(power_base, MISC_SIZE, slavio_misc_io_memory);
-
- /* 32 bit registers */
- slavio_misc_io_memory = cpu_register_io_memory(0, slavio_sysctrl_mem_read,
- slavio_sysctrl_mem_write,
- s);
- // System control
- cpu_register_physical_memory(base + 0x1f00000, SYSCTRL_SIZE,
- slavio_misc_io_memory);
+ if (base) {
+ /* 8 bit registers */
+ io = cpu_register_io_memory(0, slavio_misc_mem_read,
+ slavio_misc_mem_write, s);
+ // Slavio control
+ cpu_register_physical_memory_offset(base + MISC_CFG, MISC_SIZE, io,
+ MISC_CFG);
+ // Diagnostics
+ cpu_register_physical_memory_offset(base + MISC_DIAG, MISC_SIZE, io,
+ MISC_DIAG);
+ // Modem control
+ cpu_register_physical_memory_offset(base + MISC_MDM, MISC_SIZE, io,
+ MISC_MDM);
+
+ /* 16 bit registers */
+ io = cpu_register_io_memory(0, slavio_led_mem_read,
+ slavio_led_mem_write, s);
+ /* ss600mp diag LEDs */
+ cpu_register_physical_memory(base + MISC_LEDS, MISC_SIZE, io);
+
+ /* 32 bit registers */
+ io = cpu_register_io_memory(0, slavio_sysctrl_mem_read,
+ slavio_sysctrl_mem_write, s);
+ // System control
+ cpu_register_physical_memory(base + MISC_SYS, SYSCTRL_SIZE, io);
+ }
+
+ // AUX 1 (Misc System Functions)
+ if (aux1_base) {
+ io = cpu_register_io_memory(0, slavio_aux1_mem_read,
+ slavio_aux1_mem_write, s);
+ cpu_register_physical_memory(aux1_base, MISC_SIZE, io);
+ }
+
+ // AUX 2 (Software Powerdown Control)
+ if (aux2_base) {
+ io = cpu_register_io_memory(0, slavio_aux2_mem_read,
+ slavio_aux2_mem_write, s);
+ cpu_register_physical_memory(aux2_base, MISC_SIZE, io);
+ }
+
+ // Power management (APC) XXX: not a Slavio device
+ if (power_base) {
+ io = cpu_register_io_memory(0, apc_mem_read, apc_mem_write, s);
+ cpu_register_physical_memory(power_base, MISC_SIZE, io);
+ }
s->irq = irq;
+ s->cpu_halt = cpu_halt;
+ *fdc_tc = &s->fdc_tc;
register_savevm("slavio_misc", base, 1, slavio_misc_save, slavio_misc_load,
s);
qemu_register_reset(slavio_misc_reset, s);
slavio_misc_reset(s);
+
return s;
}
projects / qemu.git / blobdiff