DEF("boot", HAS_ARG, QEMU_OPTION_boot,
"-boot [order=drives][,once=drives][,menu=on|off]\n"
- " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time]\n"
+ " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time][,strict=on|off]\n"
" 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n"
" 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on\n"
" 'sp_time': the period that splash picture last if menu=on, unit is ms\n"
" 'rb_timeout': the timeout before guest reboot when boot failed, unit is ms\n",
QEMU_ARCH_ALL)
STEXI
-@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}]
+@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}][,strict=on|off]
@findex -boot
Specify boot order @var{drives} as a string of drive letters. Valid
drive letters depend on the target achitecture. The x86 PC uses: a, b
reboot, qemu passes '-1' to bios by default. Currently Seabios for X86
system support it.
+Do strict boot via @option{strict=on} as far as firmware/BIOS
+supports it. This only effects when boot priority is changed by
+bootindex options. The default is non-strict boot.
+
@example
# try to boot from network first, then from hard disk
qemu-system-i386 -boot order=nc
@item websocket
Opens an additional TCP listening port dedicated to VNC Websocket connections.
-By defintion the Websocket port is 5700+@var{display}. If @var{host} is
+By definition the Websocket port is 5700+@var{display}. If @var{host} is
specified connections will only be allowed from this host.
As an alternative the Websocket port could be specified by using
@code{websocket}=@var{port}.
+TLS encryption for the Websocket connection is supported if the required
+certificates are specified with the VNC option @option{x509}.
@item password
"-net tap[,vlan=n][,name=str],ifname=name\n"
" connect the host TAP network interface to VLAN 'n'\n"
#else
- "-net tap[,vlan=n][,name=str][,fd=h][,fds=x:y:...:z][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostfds=x:y:...:z][,vhostforce=on|off]\n"
+ "-net tap[,vlan=n][,name=str][,fd=h][,fds=x:y:...:z][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostfds=x:y:...:z][,vhostforce=on|off][,queues=n]\n"
" connect the host TAP network interface to VLAN 'n'\n"
" use network scripts 'file' (default=" DEFAULT_NETWORK_SCRIPT ")\n"
" to configure it and 'dfile' (default=" DEFAULT_NETWORK_DOWN_SCRIPT ")\n"
" use vhostforce=on to force vhost on for non-MSIX virtio guests\n"
" use 'vhostfd=h' to connect to an already opened vhost net device\n"
" use 'vhostfds=x:y:...:z to connect to multiple already opened vhost net devices\n"
+ " use 'queues=n' to specify the number of queues to be created for multiqueue TAP\n"
"-net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]\n"
" connects a host TAP network interface to a host bridge device 'br'\n"
" (default=" DEFAULT_BRIDGE_INTERFACE ") using the program 'helper'\n"
"-chardev msmouse,id=id[,mux=on|off]\n"
"-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]\n"
" [,mux=on|off]\n"
- "-chardev ringbuf,id=id[,size=size]\n"
+ "-chardev memory,id=id[,size=size]\n"
"-chardev file,id=id,path=path[,mux=on|off]\n"
"-chardev pipe,id=id,path=path[,mux=on|off]\n"
#ifdef _WIN32
@option{udp},
@option{msmouse},
@option{vc},
-@option{ringbuf},
+@option{memory},
@option{file},
@option{pipe},
@option{console},
@option{cols} and @option{rows} specify that the console be sized to fit a text
console with the given dimensions.
-@item -chardev ringbuf ,id=@var{id} [,size=@var{size}]
+@item -chardev memory ,id=@var{id} [,size=@var{size}]
Create a ring buffer with fixed size @option{size}.
@var{size} must be a power of two, and defaults to @code{64K}).
qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket
@end example
+@item SSH
+QEMU supports SSH (Secure Shell) access to remote disks.
+
+Examples:
+@example
+qemu-system-i386 -drive file=ssh://user@@host/path/to/disk.img
+qemu-system-i386 -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img
+@end example
+
+Currently authentication must be done using ssh-agent. Other
+authentication methods may be supported in future.
+
@item Sheepdog
Sheepdog is a distributed storage system for QEMU.
QEMU supports using either local sheepdog devices or remote networked
devices.
Syntax for specifying a sheepdog device
-@table @list
-``sheepdog:<vdiname>''
-
-``sheepdog:<vdiname>:<snapid>''
-
-``sheepdog:<vdiname>:<tag>''
-
-``sheepdog:<host>:<port>:<vdiname>''
-
-``sheepdog:<host>:<port>:<vdiname>:<snapid>''
-
-``sheepdog:<host>:<port>:<vdiname>:<tag>''
-@end table
+@example
+sheepdog[+tcp|+unix]://[host:port]/vdiname[?socket=path][#snapid|#tag]
+@end example
Example
@example
-qemu-system-i386 --drive file=sheepdog:192.0.2.1:30000:MyVirtualMachine
+qemu-system-i386 --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine
@end example
See also @url{http://http://www.osrg.net/sheepdog/}.
Example
@example
-qemu-system-x86_84 --drive file=gluster://192.0.2.1/testvol/a.img
+qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img
@end example
See also @url{http://www.gluster.org}.
ETEXI
DEFHEADING()
+#ifdef CONFIG_TPM
+DEFHEADING(TPM device options:)
+
+DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \
+ "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n"
+ " use path to provide path to a character device; default is /dev/tpm0\n"
+ " use cancel-path to provide path to TPM's cancel sysfs entry; if\n"
+ " not provided it will be searched for in /sys/class/misc/tpm?/device\n",
+ QEMU_ARCH_ALL)
+STEXI
+
+The general form of a TPM device option is:
+@table @option
+
+@item -tpmdev @var{backend} ,id=@var{id} [,@var{options}]
+@findex -tpmdev
+Backend type must be:
+@option{passthrough}.
+
+The specific backend type will determine the applicable options.
+The @code{-tpmdev} option creates the TPM backend and requires a
+@code{-device} option that specifies the TPM frontend interface model.
+
+Options to each backend are described below.
+
+Use 'help' to print all available TPM backend types.
+@example
+qemu -tpmdev help
+@end example
+
+@item -tpmdev passthrough, id=@var{id}, path=@var{path}, cancel-path=@var{cancel-path}
+
+(Linux-host only) Enable access to the host's TPM using the passthrough
+driver.
+
+@option{path} specifies the path to the host's TPM device, i.e., on
+a Linux host this would be @code{/dev/tpm0}.
+@option{path} is optional and by default @code{/dev/tpm0} is used.
+
+@option{cancel-path} specifies the path to the host TPM device's sysfs
+entry allowing for cancellation of an ongoing TPM command.
+@option{cancel-path} is optional and by default QEMU will search for the
+sysfs entry to use.
+
+Some notes about using the host's TPM with the passthrough driver:
+
+The TPM device accessed by the passthrough driver must not be
+used by any other application on the host.
+
+Since the host's firmware (BIOS/UEFI) has already initialized the TPM,
+the VM's firmware (BIOS/UEFI) will not be able to initialize the
+TPM again and may therefore not show a TPM-specific menu that would
+otherwise allow the user to configure the TPM, e.g., allow the user to
+enable/disable or activate/deactivate the TPM.
+Further, if TPM ownership is released from within a VM then the host's TPM
+will get disabled and deactivated. To enable and activate the
+TPM again afterwards, the host has to be rebooted and the user is
+required to enter the firmware's menu to enable and activate the TPM.
+If the TPM is left disabled and/or deactivated most TPM commands will fail.
+
+To create a passthrough TPM use the following two options:
+@example
+-tpmdev passthrough,id=tpm0 -device tpm-tis,tpmdev=tpm0
+@end example
+Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
+@code{tpmdev=tpm0} in the device option.
+
+@end table
+
+ETEXI
+
+DEFHEADING()
+
+#endif
+
DEFHEADING(Linux/Multiboot boot specific:)
STEXI
serial port).
The default device is @code{vc} in graphical mode and @code{stdio} in
non graphical mode.
+Use @code{-monitor none} to disable the default monitor.
ETEXI
DEF("qmp", HAS_ARG, QEMU_OPTION_qmp, \
"-qmp dev like -monitor but opens in 'control' mode\n",
Do not start CPU at startup (you must type 'c' in the monitor).
ETEXI
+DEF("realtime", HAS_ARG, QEMU_OPTION_realtime,
+ "-realtime [mlock=on|off]\n"
+ " run qemu with realtime features\n"
+ " mlock=on|off controls mlock support (default: on)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -realtime mlock=on|off
+@findex -realtime
+Run qemu with realtime features.
+mlocking qemu and guest memory can be enabled via @option{mlock=on}
+(enabled by default).
+ETEXI
+
DEF("gdb", HAS_ARG, QEMU_OPTION_gdb, \
"-gdb dev wait for gdb connection on 'dev'\n", QEMU_ARCH_ALL)
STEXI
projects / qemu.git / blobdiff