* pcsys_introduction:: Introduction
* pcsys_quickstart:: Quick Start
* sec_invocation:: Invocation
-* pcsys_keys:: Keys
+* pcsys_keys:: Keys in the graphical frontends
+* mux_keys:: Keys in the character backend multiplexer
* pcsys_monitor:: QEMU Monitor
* disk_images:: Disk Images
* pcsys_network:: Network emulation
@item
Serial ports
@item
+IPMI BMC, either and internal or external one
+@item
Creative SoundBlaster 16 sound card
@item
ENSONIQ AudioPCI ES1370 sound card
@example
@c man begin SYNOPSIS
-usage: qemu-system-i386 [options] [@var{disk_image}]
+@command{qemu-system-i386} [@var{options}] [@var{disk_image}]
@c man end
@end example
@c man end
@node pcsys_keys
-@section Keys
+@section Keys in the graphical frontends
@c man begin OPTIONS
In the virtual consoles, you can use @key{Ctrl-Up}, @key{Ctrl-Down},
@key{Ctrl-PageUp} and @key{Ctrl-PageDown} to move in the back log.
-@kindex Ctrl-a h
-During emulation, if you are using the @option{-nographic} option, use
-@key{Ctrl-a h} to get terminal commands:
+@c man end
+
+@node mux_keys
+@section Keys in the character backend multiplexer
+
+@c man begin OPTIONS
+
+During emulation, if you are using a character backend multiplexer
+(which is the default if you are using @option{-nographic}) then
+several commands are available via an escape sequence. These
+key sequences all start with an escape character, which is @key{Ctrl-a}
+by default, but can be changed with @option{-echr}. The list below assumes
+you're using the default.
@table @key
@item Ctrl-a h
@kindex Ctrl-a h
-@item Ctrl-a ?
-@kindex Ctrl-a ?
Print this help
@item Ctrl-a x
@kindex Ctrl-a x
Send break (magic sysrq in Linux)
@item Ctrl-a c
@kindex Ctrl-a c
-Switch between console and monitor
+Rotate between the frontends connected to the multiplexer (usually
+this switches between the monitor and the console)
@item Ctrl-a Ctrl-a
-@kindex Ctrl-a a
-Send Ctrl-a
+@kindex Ctrl-a Ctrl-a
+Send the escape character to the frontend
@end table
@c man end
@include qemu-monitor.texi
+@include qemu-monitor-info.texi
+
@subsection Integer expressions
The monitor understands integers expressions for every integer
File name of a base image (see @option{create} subcommand).
@item compat6
Create a VMDK version 6 image (instead of version 4)
+@item hwversion
+Specify vmdk virtual hardware version. Compat6 flag cannot be enabled
+if hwversion is specified.
@item subformat
Specifies which VMDK subformat to use. Valid options are
@code{monolithicSparse} (default),
When using the built-in TFTP server, the router is also the TFTP
server.
-When using the @option{-redir} option, TCP or UDP connections can be
-redirected from the host to the guest. It allows for example to
-redirect X11, telnet or SSH connections.
+When using the @option{'-netdev user,hostfwd=...'} option, TCP or UDP
+connections can be redirected from the host to the guest. It allows for
+example to redirect X11, telnet or SSH connections.
@subsection Connecting VLANs between QEMU instances
@subsection Inter-VM Shared Memory device
-With KVM enabled on a Linux host, a shared memory device is available. Guests
-map a POSIX shared memory region into the guest as a PCI device that enables
-zero-copy communication to the application level of the guests. The basic
-syntax is:
+On Linux hosts, a shared memory device is available. The basic syntax
+is:
+
+@example
+qemu-system-x86_64 -device ivshmem-plain,memdev=@var{hostmem}
+@end example
+
+where @var{hostmem} names a host memory backend. For a POSIX shared
+memory backend, use something like
@example
-qemu-system-i386 -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
+-object memory-backend-file,size=1M,share,mem-path=/dev/shm/ivshmem,id=@var{hostmem}
@end example
If desired, interrupts can be sent between guest VMs accessing the same shared
memory server is:
@example
-qemu-system-i386 -device ivshmem,size=<size in format accepted by -m>[,chardev=<id>]
- [,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master]
-qemu-system-i386 -chardev socket,path=<path>,id=<id>
+# First start the ivshmem server once and for all
+ivshmem-server -p @var{pidfile} -S @var{path} -m @var{shm-name} -l @var{shm-size} -n @var{vectors}
+
+# Then start your qemu instances with matching arguments
+qemu-system-x86_64 -device ivshmem-doorbell,vectors=@var{vectors},chardev=@var{id}
+ -chardev socket,path=@var{path},id=@var{id}
@end example
When using the server, the guest will be assigned a VM ID (>=0) that allows guests
using the same server to communicate via interrupts. Guests can read their
-VM ID from a device register (see example code). Since receiving the shared
-memory region from the server is asynchronous, there is a (small) chance the
-guest may boot before the shared memory is attached. To allow an application
-to ensure shared memory is attached, the VM ID register will return -1 (an
-invalid VM ID) until the memory is attached. Once the shared memory is
-attached, the VM ID will return the guest's valid VM ID. With these semantics,
-the guest application can check to ensure the shared memory is attached to the
-guest before proceeding.
-
-The @option{role} argument can be set to either master or peer and will affect
-how the shared memory is migrated. With @option{role=master}, the guest will
-copy the shared memory on migration to the destination host. With
-@option{role=peer}, the guest will not be able to migrate with the device attached.
-With the @option{peer} case, the device should be detached and then reattached
-after migration using the PCI hotplug support.
+VM ID from a device register (see ivshmem-spec.txt).
+
+@subsubsection Migration with ivshmem
+
+With device property @option{master=on}, the guest will copy the shared
+memory on migration to the destination host. With @option{master=off},
+the guest will not be able to migrate with the device attached. In the
+latter case, the device should be detached and then reattached after
+migration using the PCI hotplug support.
+
+At most one of the devices sharing the same memory can be master. The
+master must complete migration before you plug back the other devices.
+
+@subsubsection ivshmem and hugepages
+
+Instead of specifying the <shm size> using POSIX shm, you may specify
+a memory backend that has hugepage support:
+
+@example
+qemu-system-x86_64 -object memory-backend-file,size=1G,mem-path=/dev/hugepages/my-shmem-file,share,id=mb1
+ -device ivshmem-plain,memdev=mb1
+@end example
+
+ivshmem-server also supports hugepages mount points with the
+@option{-m} memory path argument.
@node direct_linux_boot
@section Direct Linux Boot
This USB device implements the USB Transport Layer of HCI. Example
usage:
@example
-qemu-system-i386 [...OPTIONS...] -usbdevice bt:hci,vlan=3 -bt device:keyboard,vlan=3
+@command{qemu-system-i386} [...@var{OPTIONS}...] @option{-usbdevice} bt:hci,vlan=3 @option{-bt} device:keyboard,vlan=3
@end example
@end table
@subsubsection Share a directory between Unix and Windows
-See @ref{sec_invocation} about the help of the option @option{-smb}.
+See @ref{sec_invocation} about the help of the option
+@option{'-netdev user,smb=...'}.
@subsubsection Windows XP security problem
@subsection Command line options
@example
-usage: qemu-i386 [-h] [-d] [-L path] [-s size] [-cpu model] [-g port] [-B offset] [-R size] program [arguments...]
+@command{qemu-i386} [@option{-h]} [@option{-d]} [@option{-L} @var{path}] [@option{-s} @var{size}] [@option{-cpu} @var{model}] [@option{-g} @var{port}] [@option{-B} @var{offset}] [@option{-R} @var{size}] @var{program} [@var{arguments}...]
@end example
@table @option
@subsection Command line options
@example
-usage: qemu-sparc64 [-h] [-d] [-L path] [-s size] [-bsd type] program [arguments...]
+@command{qemu-sparc64} [@option{-h]} [@option{-d]} [@option{-L} @var{path}] [@option{-s} @var{size}] [@option{-bsd} @var{type}] @var{program} [@var{arguments}...]
@end example
@table @option
@item pkg-config: @uref{http://www.freedesktop.org/wiki/Software/pkg-config/}
@item autoconf: @uref{http://www.gnu.org/software/autoconf/autoconf.html}
@item automake: @uref{http://www.gnu.org/software/automake/}
-@item libtool: @uref{http://www.gnu.org/software/libtool/}
@item pixman: @uref{http://www.pixman.org/}
@end enumerate
projects / qemu.git / blobdiff