trace: enable tracing in qemu-nbd

[qemu.git] / Makefile.target

diff --git a/Makefile.target b/Makefile.target
index 2262d89354dfab40e7244b9ffd327cf2d22a98be..d720b3e73362067b794c39546653540e1cfc84f9 100644 (file)
--- a/Makefile.target
+++ b/Makefile.target
@@ -1,11 +1,13 @@
 # -*- Mode: makefile -*-
 
+BUILD_DIR?=$(CURDIR)/..
+
 include ../config-host.mak
 include config-target.mak
 include config-devices.mak
 include $(SRC_PATH)/rules.mak
 
-$(call set-vpath, $(SRC_PATH))
+$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
 ifdef CONFIG_LINUX
 QEMU_CFLAGS += -I../linux-headers
 endif
@@ -46,7 +48,7 @@ else
 TARGET_TYPE=system
 endif
 
-$(QEMU_PROG).stp-installed: $(SRC_PATH)/trace-events
+$(QEMU_PROG).stp-installed: $(BUILD_DIR)/trace-events-all
        $(call quiet-command,$(TRACETOOL) \
                --format=stap \
                --backends=$(TRACE_BACKENDS) \
@@ -55,7 +57,7 @@ $(QEMU_PROG).stp-installed: $(SRC_PATH)/trace-events
                --target-type=$(TARGET_TYPE) \
                < $< > $@,"  GEN   $(TARGET_DIR)$(QEMU_PROG).stp-installed")
 
-$(QEMU_PROG).stp: $(SRC_PATH)/trace-events
+$(QEMU_PROG).stp: $(BUILD_DIR)/trace-events-all
        $(call quiet-command,$(TRACETOOL) \
                --format=stap \
                --backends=$(TRACE_BACKENDS) \
@@ -64,7 +66,7 @@ $(QEMU_PROG).stp: $(SRC_PATH)/trace-events
                --target-type=$(TARGET_TYPE) \
                < $< > $@,"  GEN   $(TARGET_DIR)$(QEMU_PROG).stp")
 
-$(QEMU_PROG)-simpletrace.stp: $(SRC_PATH)/trace-events
+$(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace-events-all
        $(call quiet-command,$(TRACETOOL) \
                --format=simpletrace-stap \
                --backends=$(TRACE_BACKENDS) \
@@ -83,8 +85,11 @@ all: $(PROGS) stap
 #########################################################
 # cpu emulator library
 obj-y = exec.o translate-all.o cpu-exec.o
+obj-y += translate-common.o
+obj-y += cpu-exec-common.o
 obj-y += tcg/tcg.o tcg/tcg-op.o tcg/optimize.o
 obj-$(CONFIG_TCG_INTERPRETER) += tci.o
+obj-y += tcg/tcg-common.o
 obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
 obj-y += fpu/softfloat.o
 obj-y += target-$(TARGET_BASE_ARCH)/
@@ -103,7 +108,12 @@ obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal128.o
 
 ifdef CONFIG_LINUX_USER
 
-QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) -I$(SRC_PATH)/linux-user
+# Note that we only add linux-user/host/$ARCH if it exists, and
+# that it must come before linux-user/host/generic in the search path.
+QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) \
+             $(patsubst %,-I%,$(wildcard $(SRC_PATH)/linux-user/host/$(ARCH))) \
+             -I$(SRC_PATH)/linux-user/host/generic \
+             -I$(SRC_PATH)/linux-user
 
 obj-y += linux-user/
 obj-y += gdbstub.o thunk.o user-exec.o
@@ -129,12 +139,12 @@ ifdef CONFIG_SOFTMMU
 obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
 obj-y += qtest.o bootdevice.o
 obj-y += hw/
-obj-$(CONFIG_FDT) += device_tree.o
 obj-$(CONFIG_KVM) += kvm-all.o
-obj-y += memory.o savevm.o cputlb.o
+obj-y += memory.o cputlb.o
 obj-y += memory_mapping.o
 obj-y += dump.o
-LIBS+=$(libs_softmmu)
+obj-y += migration/ram.o migration/savevm.o
+LIBS := $(libs_softmmu) $(LIBS)
 
 # xen support
 obj-$(CONFIG_XEN) += xen-common.o
@@ -149,7 +159,7 @@ else
 obj-y += hw/$(TARGET_BASE_ARCH)/
 endif
 
-GENERATED_HEADERS += hmp-commands.h qmp-commands-old.h
+GENERATED_HEADERS += hmp-commands.h hmp-commands-info.h qmp-commands-old.h
 
 endif # CONFIG_SOFTMMU
 
@@ -168,26 +178,41 @@ target-obj-y-save := $(target-obj-y)
 dummy := $(call unnest-vars,.., \
                block-obj-y \
                block-obj-m \
+               crypto-obj-y \
+               crypto-aes-obj-y \
+               qom-obj-y \
+               io-obj-y \
                common-obj-y \
                common-obj-m)
 target-obj-y := $(target-obj-y-save)
 all-obj-y += $(common-obj-y)
 all-obj-y += $(target-obj-y)
+all-obj-y += $(qom-obj-y)
 all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y)
+all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
+all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
+all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
 
 $(QEMU_PROG_BUILD): config-devices.mak
 
 # build either PROG or PROGW
 $(QEMU_PROG_BUILD): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
        $(call LINK, $(filter-out %.mak, $^))
+ifdef CONFIG_DARWIN
+       $(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"  REZ   $(TARGET_DIR)$@")
+       $(call quiet-command,SetFile -a C $@,"  SETFILE $(TARGET_DIR)$@")
+endif
 
 gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
        $(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES),"  GEN   $(TARGET_DIR)$@")
 
-hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
+hmp-commands.h: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
+       $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")
+
+hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
        $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")
 
-qmp-commands-old.h: $(SRC_PATH)/qmp-commands.hx
+qmp-commands-old.h: $(SRC_PATH)/qmp-commands.hx $(SRC_PATH)/scripts/hxtool
        $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")
 
 clean: