#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
#define TX_TIMER_INTERVAL 150000 /* 150 us */
+/* Limit the number of packets that can be sent via a single flush
+ * of the TX queue. This gives us a guaranteed exit condition and
+ * ensures fairness in the io path. 256 conveniently matches the
+ * length of the TX queue and shows a good balance of performance
+ * and latency. */
+#define TX_BURST 256
+
+typedef struct virtio_net_conf
+{
+ uint32_t txtimer;
+ int32_t txburst;
+ char *tx;
+} virtio_net_conf;
+
/* Maximum packet size we can receive from tap device: header + 64k */
#define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
struct virtio_net_config
{
- /* The config defining mac address (6 bytes) */
- uint8_t mac[6];
+ /* The config defining mac address ($ETH_ALEN bytes) */
+ uint8_t mac[ETH_ALEN];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
uint16_t status;
-} __attribute__((packed));
+} QEMU_PACKED;
/* This is the first element of the scatter-gather list. If you don't
* specify GSO or CSUM features, you can simply ignore the header. */
uint16_t num_buffers; /* Number of merged rx buffers */
};
-void virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn);
-
/*
* Control virtqueue data structures
*
#define VIRTIO_NET_ERR 1
/*
- * Control the RX mode, ie. promisucous and allmulti. PROMISC and
- * ALLMULTI commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable. These commands
- * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable. Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
*/
#define VIRTIO_NET_CTRL_RX_MODE 0
#define VIRTIO_NET_CTRL_RX_MODE_PROMISC 0
#define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI 1
+ #define VIRTIO_NET_CTRL_RX_MODE_ALLUNI 2
+ #define VIRTIO_NET_CTRL_RX_MODE_NOMULTI 3
+ #define VIRTIO_NET_CTRL_RX_MODE_NOUNI 4
+ #define VIRTIO_NET_CTRL_RX_MODE_NOBCAST 5
/*
* Control the MAC filter table.
#define VIRTIO_NET_CTRL_MAC 1
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor. Del is the
+ * opposite of add. Both commands expect an out entry containing a 2
+ * byte VLAN ID. VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN 2
+ #define VIRTIO_NET_CTRL_VLAN_ADD 0
+ #define VIRTIO_NET_CTRL_VLAN_DEL 1
+
+#define DEFINE_VIRTIO_NET_FEATURES(_state, _field) \
+ DEFINE_VIRTIO_COMMON_FEATURES(_state, _field), \
+ DEFINE_PROP_BIT("csum", _state, _field, VIRTIO_NET_F_CSUM, true), \
+ DEFINE_PROP_BIT("guest_csum", _state, _field, VIRTIO_NET_F_GUEST_CSUM, true), \
+ DEFINE_PROP_BIT("gso", _state, _field, VIRTIO_NET_F_GSO, true), \
+ DEFINE_PROP_BIT("guest_tso4", _state, _field, VIRTIO_NET_F_GUEST_TSO4, true), \
+ DEFINE_PROP_BIT("guest_tso6", _state, _field, VIRTIO_NET_F_GUEST_TSO6, true), \
+ DEFINE_PROP_BIT("guest_ecn", _state, _field, VIRTIO_NET_F_GUEST_ECN, true), \
+ DEFINE_PROP_BIT("guest_ufo", _state, _field, VIRTIO_NET_F_GUEST_UFO, true), \
+ DEFINE_PROP_BIT("host_tso4", _state, _field, VIRTIO_NET_F_HOST_TSO4, true), \
+ DEFINE_PROP_BIT("host_tso6", _state, _field, VIRTIO_NET_F_HOST_TSO6, true), \
+ DEFINE_PROP_BIT("host_ecn", _state, _field, VIRTIO_NET_F_HOST_ECN, true), \
+ DEFINE_PROP_BIT("host_ufo", _state, _field, VIRTIO_NET_F_HOST_UFO, true), \
+ DEFINE_PROP_BIT("mrg_rxbuf", _state, _field, VIRTIO_NET_F_MRG_RXBUF, true), \
+ DEFINE_PROP_BIT("status", _state, _field, VIRTIO_NET_F_STATUS, true), \
+ DEFINE_PROP_BIT("ctrl_vq", _state, _field, VIRTIO_NET_F_CTRL_VQ, true), \
+ DEFINE_PROP_BIT("ctrl_rx", _state, _field, VIRTIO_NET_F_CTRL_RX, true), \
+ DEFINE_PROP_BIT("ctrl_vlan", _state, _field, VIRTIO_NET_F_CTRL_VLAN, true), \
+ DEFINE_PROP_BIT("ctrl_rx_extra", _state, _field, VIRTIO_NET_F_CTRL_RX_EXTRA, true)
#endif