*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
*/
-#include "vl.h"
+#include "hw.h"
+#include "audio/audio.h"
+#include "sysemu.h"
+#include "console.h"
+#include "omap.h"
+#include "boards.h"
+#include "arm-misc.h"
+#include "devices.h"
+#include "loader.h"
+#include "exec-memory.h"
-static uint32_t static_readb(void *opaque, target_phys_addr_t offset)
+static uint32_t static_readb(void *opaque, hwaddr offset)
{
uint32_t *val = (uint32_t *) opaque;
return *val >> ((offset & 3) << 3);
}
-static uint32_t static_readh(void *opaque, target_phys_addr_t offset) {
+static uint32_t static_readh(void *opaque, hwaddr offset)
+{
uint32_t *val = (uint32_t *) opaque;
return *val >> ((offset & 1) << 3);
}
-static uint32_t static_readw(void *opaque, target_phys_addr_t offset) {
+static uint32_t static_readw(void *opaque, hwaddr offset)
+{
uint32_t *val = (uint32_t *) opaque;
return *val >> ((offset & 0) << 3);
}
-static void static_write(void *opaque, target_phys_addr_t offset,
+static void static_write(void *opaque, hwaddr offset,
uint32_t value)
{
#ifdef SPY
#endif
}
-static CPUReadMemoryFunc *static_readfn[] = {
- static_readb,
- static_readh,
- static_readw,
-};
-
-static CPUWriteMemoryFunc *static_writefn[] = {
- static_write,
- static_write,
- static_write,
+static const MemoryRegionOps static_ops = {
+ .old_mmio = {
+ .read = { static_readb, static_readh, static_readw, },
+ .write = { static_write, static_write, static_write, },
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
};
/* Palm Tunsgten|E support */
#define PALMTE_MMC2_GPIO 7
#define PALMTE_MMC3_GPIO 11
+static MouseTransformInfo palmte_pointercal = {
+ .x = 320,
+ .y = 320,
+ .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
+};
+
static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
{
- qemu_irq p_int = omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO];
+ uWireSlave *tsc;
+
+ tsc = tsc2102_init(qdev_get_gpio_in(cpu->gpio, PALMTE_PINTDAV_GPIO));
- omap_uwire_attach(
- cpu->microwire,
- tsc2102_init(qemu_irq_invert(p_int)),
- 0);
+ omap_uwire_attach(cpu->microwire, tsc, 0);
+ omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
+
+ tsc210x_set_transform(tsc, &palmte_pointercal);
}
static struct {
!(keycode & 0x80));
}
-static void palmte_init(int ram_size, int vga_ram_size, int boot_device,
- DisplayState *ds, const char **fd_filename, int snapshot,
- const char *kernel_filename, const char *kernel_cmdline,
- const char *initrd_filename, const char *cpu_model)
+static void palmte_onoff_gpios(void *opaque, int line, int level)
+{
+ switch (line) {
+ case 0:
+ printf("%s: current to MMC/SD card %sabled.\n",
+ __FUNCTION__, level ? "dis" : "en");
+ break;
+ case 1:
+ printf("%s: internal speaker amplifier %s.\n",
+ __FUNCTION__, level ? "down" : "on");
+ break;
+
+ /* These LCD & Audio output signals have not been identified yet. */
+ case 2:
+ case 3:
+ case 4:
+ printf("%s: LCD GPIO%i %s.\n",
+ __FUNCTION__, line - 1, level ? "high" : "low");
+ break;
+ case 5:
+ case 6:
+ printf("%s: Audio GPIO%i %s.\n",
+ __FUNCTION__, line - 4, level ? "high" : "low");
+ break;
+ }
+}
+
+static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
{
- struct omap_mpu_state_s *cpu;
+ qemu_irq *misc_gpio;
+
+ omap_mmc_handlers(cpu->mmc,
+ qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO),
+ qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
+ [PALMTE_MMC_SWITCH_GPIO]));
+
+ misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
+ qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]);
+ qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]);
+ qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]);
+ qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]);
+ qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]);
+ omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]);
+ omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]);
+
+ /* Reset some inputs to initial state. */
+ qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO));
+ qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USB_OR_DC_GPIO));
+ qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, 4));
+ qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_HEADPHONES_GPIO));
+ qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
+ qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
+ qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
+ qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
+}
+
+static struct arm_boot_info palmte_binfo = {
+ .loader_start = OMAP_EMIFF_BASE,
+ .ram_size = 0x02000000,
+ .board_id = 0x331,
+};
+
+static void palmte_init(QEMUMachineInitArgs *args)
+{
+ const char *cpu_model = args->cpu_model;
+ const char *kernel_filename = args->kernel_filename;
+ const char *kernel_cmdline = args->kernel_cmdline;
+ const char *initrd_filename = args->initrd_filename;
+ MemoryRegion *address_space_mem = get_system_memory();
+ struct omap_mpu_state_s *mpu;
int flash_size = 0x00800000;
- int sdram_size = 0x02000000;
- int io;
+ int sdram_size = palmte_binfo.ram_size;
static uint32_t cs0val = 0xffffffff;
static uint32_t cs1val = 0x0000e1a0;
static uint32_t cs2val = 0x0000e1a0;
static uint32_t cs3val = 0xe1a0e1a0;
- ram_addr_t phys_flash;
int rom_size, rom_loaded = 0;
+ DisplayState *ds = get_displaystate();
+ MemoryRegion *flash = g_new(MemoryRegion, 1);
+ MemoryRegion *cs = g_new(MemoryRegion, 4);
- if (ram_size < flash_size + sdram_size + OMAP15XX_SRAM_SIZE) {
- fprintf(stderr, "This architecture uses %i bytes of memory\n",
- flash_size + sdram_size + OMAP15XX_SRAM_SIZE);
- exit(1);
- }
-
- cpu = omap310_mpu_init(sdram_size, ds, cpu_model);
+ mpu = omap310_mpu_init(address_space_mem, sdram_size, cpu_model);
/* External Flash (EMIFS) */
- cpu_register_physical_memory(OMAP_CS0_BASE, flash_size,
- (phys_flash = qemu_ram_alloc(flash_size)) | IO_MEM_ROM);
+ memory_region_init_ram(flash, "palmte.flash", flash_size);
+ vmstate_register_ram_global(flash);
+ memory_region_set_readonly(flash, true);
+ memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE, flash);
- io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs0val);
- cpu_register_physical_memory(OMAP_CS0_BASE + flash_size,
- OMAP_CS0_SIZE - flash_size, io);
- io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs1val);
- cpu_register_physical_memory(OMAP_CS1_BASE, OMAP_CS1_SIZE, io);
- io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs2val);
- cpu_register_physical_memory(OMAP_CS2_BASE, OMAP_CS2_SIZE, io);
- io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs3val);
- cpu_register_physical_memory(OMAP_CS3_BASE, OMAP_CS3_SIZE, io);
+ memory_region_init_io(&cs[0], &static_ops, &cs0val, "palmte-cs0",
+ OMAP_CS0_SIZE - flash_size);
+ memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE + flash_size,
+ &cs[0]);
+ memory_region_init_io(&cs[1], &static_ops, &cs1val, "palmte-cs1",
+ OMAP_CS1_SIZE);
+ memory_region_add_subregion(address_space_mem, OMAP_CS1_BASE, &cs[1]);
+ memory_region_init_io(&cs[2], &static_ops, &cs2val, "palmte-cs2",
+ OMAP_CS2_SIZE);
+ memory_region_add_subregion(address_space_mem, OMAP_CS2_BASE, &cs[2]);
+ memory_region_init_io(&cs[3], &static_ops, &cs3val, "palmte-cs3",
+ OMAP_CS3_SIZE);
+ memory_region_add_subregion(address_space_mem, OMAP_CS3_BASE, &cs[3]);
- palmte_microwire_setup(cpu);
+ palmte_microwire_setup(mpu);
- qemu_add_kbd_event_handler(palmte_button_event, cpu);
+ qemu_add_kbd_event_handler(palmte_button_event, mpu);
- omap_mmc_handlers(cpu->mmc,
- omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
- qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
- [PALMTE_MMC_SWITCH_GPIO]));
+ palmte_gpio_setup(mpu);
/* Setup initial (reset) machine state */
if (nb_option_roms) {
- rom_size = get_image_size(option_rom[0]);
- if (rom_size > flash_size)
+ rom_size = get_image_size(option_rom[0].name);
+ if (rom_size > flash_size) {
fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
__FUNCTION__, rom_size, flash_size);
- else if (rom_size > 0 && load_image(option_rom[0],
- phys_ram_base + phys_flash) > 0) {
+ rom_size = 0;
+ }
+ if (rom_size > 0) {
+ rom_size = load_image_targphys(option_rom[0].name, OMAP_CS0_BASE,
+ flash_size);
rom_loaded = 1;
- cpu->env->regs[15] = 0x00000000;
- } else
+ }
+ if (rom_size < 0) {
fprintf(stderr, "%s: error loading '%s'\n",
- __FUNCTION__, option_rom[0]);
+ __FUNCTION__, option_rom[0].name);
+ }
}
if (!rom_loaded && !kernel_filename) {
/* Load the kernel. */
if (kernel_filename) {
- /* Start at bootloader. */
- cpu->env->regs[15] = OMAP_EMIFF_BASE;
-
- arm_load_kernel(cpu->env, sdram_size, kernel_filename, kernel_cmdline,
- initrd_filename, 0x331, OMAP_EMIFF_BASE);
+ palmte_binfo.kernel_filename = kernel_filename;
+ palmte_binfo.kernel_cmdline = kernel_cmdline;
+ palmte_binfo.initrd_filename = initrd_filename;
+ arm_load_kernel(mpu->cpu, &palmte_binfo);
}
- dpy_resize(ds, 320, 320);
+ /* FIXME: We shouldn't really be doing this here. The LCD controller
+ will set the size once configured, so this just sets an initial
+ size until the guest activates the display. */
+ ds->surface = qemu_resize_displaysurface(ds, 320, 320);
+ dpy_gfx_resize(ds);
}
-QEMUMachine palmte_machine = {
- "cheetah",
- "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
- palmte_init,
+static QEMUMachine palmte_machine = {
+ .name = "cheetah",
+ .desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
+ .init = palmte_init,
};
+
+static void palmte_machine_init(void)
+{
+ qemu_register_machine(&palmte_machine);
+}
+
+machine_init(palmte_machine_init);
projects / qemu.git / blobdiff