# @write_threshold: configured write threshold for the device.
# 0 if disabled. (Since 2.3)
#
+# @dirty-bitmaps: dirty bitmaps information (only present if node
+# has one or more dirty bitmaps) (Since 4.2)
+#
# Since: 0.14.0
#
##
'*bps_wr_max_length': 'int', '*iops_max_length': 'int',
'*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
'*iops_size': 'int', '*group': 'str', 'cache': 'BlockdevCacheInfo',
- 'write_threshold': 'int' } }
+ 'write_threshold': 'int', '*dirty-bitmaps': ['BlockDirtyInfo'] } }
##
# @BlockDeviceIoStatus:
#
# @dirty-bitmaps: dirty bitmaps information (only present if the
# driver has one or more dirty bitmaps) (Since 2.0)
+# Deprecated in 4.2; see BlockDeviceInfo instead.
#
# @io-status: @BlockDeviceIoStatus. Only present if the device
# supports it and the VM is configured to stop on errors
#
# @none: only copy data written from now on
#
-# @incremental: only copy data described by the dirty bitmap. Since: 2.4
+# @incremental: only copy data described by the dirty bitmap. (since: 2.4)
+#
+# @bitmap: only copy data described by the dirty bitmap. (since: 4.2)
+# Behavior on completion is determined by the BitmapSyncMode.
#
# Since: 1.3
##
{ 'enum': 'MirrorSyncMode',
- 'data': ['top', 'full', 'none', 'incremental'] }
+ 'data': ['top', 'full', 'none', 'incremental', 'bitmap'] }
+
+##
+# @BitmapSyncMode:
+#
+# An enumeration of possible behaviors for the synchronization of a bitmap
+# when used for data copy operations.
+#
+# @on-success: The bitmap is only synced when the operation is successful.
+# This is the behavior always used for 'INCREMENTAL' backups.
+#
+# @never: The bitmap is never synchronized with the operation, and is
+# treated solely as a read-only manifest of blocks to copy.
+#
+# @always: The bitmap is always synchronized with the operation,
+# regardless of whether or not the operation was successful.
+#
+# Since: 4.2
+##
+{ 'enum': 'BitmapSyncMode',
+ 'data': ['on-success', 'never', 'always'] }
##
# @MirrorCopyMode:
'data': { 'node': 'str', 'overlay': 'str' } }
##
-# @DriveBackup:
+# @BackupCommon:
#
# @job-id: identifier for the newly-created block job. If
# omitted, the device name will be used. (Since 2.7)
#
# @device: the device name or node-name of a root node which should be copied.
#
-# @target: the target of the new image. If the file exists, or if it
-# is a device, the existing file/device will be used as the new
-# destination. If it does not exist, a new file will be created.
-#
-# @format: the format of the new destination, default is to
-# probe if @mode is 'existing', else the format of the source
-#
# @sync: what parts of the disk image should be copied to the destination
# (all the disk, only the sectors allocated in the topmost image, from a
# dirty bitmap, or only new I/O).
#
-# @mode: whether and how QEMU should create a new image, default is
-# 'absolute-paths'.
+# @speed: the maximum speed, in bytes per second. The default is 0,
+# for unlimited.
#
-# @speed: the maximum speed, in bytes per second
+# @bitmap: The name of a dirty bitmap to use.
+# Must be present if sync is "bitmap" or "incremental".
+# Can be present if sync is "full" or "top".
+# Must not be present otherwise.
+# (Since 2.4 (drive-backup), 3.1 (blockdev-backup))
#
-# @bitmap: the name of dirty bitmap if sync is "incremental".
-# Must be present if sync is "incremental", must NOT be present
-# otherwise. (Since 2.4)
+# @bitmap-mode: Specifies the type of data the bitmap should contain after
+# the operation concludes.
+# Must be present if a bitmap was provided,
+# Must NOT be present otherwise. (Since 4.2)
#
# @compress: true to compress data, if the target format supports it.
# (default: false) (since 2.8)
# I/O. If an error occurs during a guest write request, the device's
# rerror/werror actions will be used.
#
-# Since: 1.6
+# Since: 4.2
##
-{ 'struct': 'DriveBackup',
- 'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
- '*format': 'str', 'sync': 'MirrorSyncMode',
- '*mode': 'NewImageMode', '*speed': 'int',
- '*bitmap': 'str', '*compress': 'bool',
+{ 'struct': 'BackupCommon',
+ 'data': { '*job-id': 'str', 'device': 'str',
+ 'sync': 'MirrorSyncMode', '*speed': 'int',
+ '*bitmap': 'str', '*bitmap-mode': 'BitmapSyncMode',
+ '*compress': 'bool',
'*on-source-error': 'BlockdevOnError',
'*on-target-error': 'BlockdevOnError',
'*auto-finalize': 'bool', '*auto-dismiss': 'bool' } }
##
-# @BlockdevBackup:
-#
-# @job-id: identifier for the newly-created block job. If
-# omitted, the device name will be used. (Since 2.7)
-#
-# @device: the device name or node-name of a root node which should be copied.
-#
-# @target: the device name or node-name of the backup target node.
-#
-# @sync: what parts of the disk image should be copied to the destination
-# (all the disk, only the sectors allocated in the topmost image, or
-# only new I/O).
-#
-# @speed: the maximum speed, in bytes per second. The default is 0,
-# for unlimited.
-#
-# @bitmap: the name of dirty bitmap if sync is "incremental".
-# Must be present if sync is "incremental", must NOT be present
-# otherwise. (Since 3.1)
-#
-# @compress: true to compress data, if the target format supports it.
-# (default: false) (since 2.8)
+# @DriveBackup:
#
-# @on-source-error: the action to take on an error on the source,
-# default 'report'. 'stop' and 'enospc' can only be used
-# if the block device supports io-status (see BlockInfo).
+# @target: the target of the new image. If the file exists, or if it
+# is a device, the existing file/device will be used as the new
+# destination. If it does not exist, a new file will be created.
#
-# @on-target-error: the action to take on an error on the target,
-# default 'report' (no limitations, since this applies to
-# a different block device than @device).
+# @format: the format of the new destination, default is to
+# probe if @mode is 'existing', else the format of the source
#
-# @auto-finalize: When false, this job will wait in a PENDING state after it has
-# finished its work, waiting for @block-job-finalize before
-# making any block graph changes.
-# When true, this job will automatically
-# perform its abort or commit actions.
-# Defaults to true. (Since 2.12)
+# @mode: whether and how QEMU should create a new image, default is
+# 'absolute-paths'.
#
-# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
-# has completely ceased all work, and awaits @block-job-dismiss.
-# When true, this job will automatically disappear from the query
-# list without user intervention.
-# Defaults to true. (Since 2.12)
+# Since: 1.6
+##
+{ 'struct': 'DriveBackup',
+ 'base': 'BackupCommon',
+ 'data': { 'target': 'str',
+ '*format': 'str',
+ '*mode': 'NewImageMode' } }
+
+##
+# @BlockdevBackup:
#
-# Note: @on-source-error and @on-target-error only affect background
-# I/O. If an error occurs during a guest write request, the device's
-# rerror/werror actions will be used.
+# @target: the device name or node-name of the backup target node.
#
# Since: 2.3
##
{ 'struct': 'BlockdevBackup',
- 'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
- 'sync': 'MirrorSyncMode', '*speed': 'int',
- '*bitmap': 'str', '*compress': 'bool',
- '*on-source-error': 'BlockdevOnError',
- '*on-target-error': 'BlockdevOnError',
- '*auto-finalize': 'bool', '*auto-dismiss': 'bool' } }
+ 'base': 'BackupCommon',
+ 'data': { 'target': 'str' } }
##
# @blockdev-snapshot-sync:
#
# @file Node to create the image format on
# @size Size of the virtual disk in bytes
+# @preallocation Preallocation mode for the new image
+# (since: 4.2)
+# (default: off; allowed values: off, metadata, falloc, full)
#
# Since: 2.12
##
{ 'struct': 'BlockdevCreateOptionsLUKS',
'base': 'QCryptoBlockCreateOptionsLUKS',
'data': { 'file': 'BlockdevRef',
- 'size': 'size' } }
+ 'size': 'size',
+ '*preallocation': 'PreallocMode' } }
##
# @BlockdevCreateOptionsNfs:
# @off: no preallocation
# @metadata: preallocate only for metadata
# @falloc: like @full preallocation but allocate disk space by
-# posix_fallocate() rather than writing zeros.
-# @full: preallocate all data by writing zeros to device to ensure disk
-# space is really available. @full preallocation also sets up
-# metadata correctly.
+# posix_fallocate() rather than writing data.
+# @full: preallocate all data by writing it to the device to ensure
+# disk space is really available. This data may or may not be
+# zero, depending on the image format and storage.
+# @full preallocation also sets up metadata correctly.
#
# Since: 2.2
##
projects / qemu.git / blobdiff