*
*/
-#ifndef _QEMU_VIRTIO_SCSI_H
-#define _QEMU_VIRTIO_SCSI_H
+#ifndef QEMU_VIRTIO_SCSI_H
+#define QEMU_VIRTIO_SCSI_H
+/* Override CDB/sense data size: they are dynamic (guest controlled) in QEMU */
+#define VIRTIO_SCSI_CDB_SIZE 0
+#define VIRTIO_SCSI_SENSE_SIZE 0
+#include "standard-headers/linux/virtio_scsi.h"
#include "hw/virtio/virtio.h"
#include "hw/pci/pci.h"
#include "hw/scsi/scsi.h"
#include "sysemu/iothread.h"
-#include "hw/virtio/dataplane/vring.h"
#define TYPE_VIRTIO_SCSI_COMMON "virtio-scsi-common"
#define VIRTIO_SCSI_COMMON(obj) \
#define VIRTIO_SCSI(obj) \
OBJECT_CHECK(VirtIOSCSI, (obj), TYPE_VIRTIO_SCSI)
-
-/* The ID for virtio_scsi */
-#define VIRTIO_ID_SCSI 8
-
-/* Feature Bits */
-#define VIRTIO_SCSI_F_INOUT 0
-#define VIRTIO_SCSI_F_HOTPLUG 1
-#define VIRTIO_SCSI_F_CHANGE 2
-
#define VIRTIO_SCSI_VQ_SIZE 128
-#define VIRTIO_SCSI_CDB_SIZE 32
-#define VIRTIO_SCSI_SENSE_SIZE 96
#define VIRTIO_SCSI_MAX_CHANNEL 0
#define VIRTIO_SCSI_MAX_TARGET 255
#define VIRTIO_SCSI_MAX_LUN 16383
-/* Response codes */
-#define VIRTIO_SCSI_S_OK 0
-#define VIRTIO_SCSI_S_OVERRUN 1
-#define VIRTIO_SCSI_S_ABORTED 2
-#define VIRTIO_SCSI_S_BAD_TARGET 3
-#define VIRTIO_SCSI_S_RESET 4
-#define VIRTIO_SCSI_S_BUSY 5
-#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
-#define VIRTIO_SCSI_S_TARGET_FAILURE 7
-#define VIRTIO_SCSI_S_NEXUS_FAILURE 8
-#define VIRTIO_SCSI_S_FAILURE 9
-#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10
-#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11
-#define VIRTIO_SCSI_S_INCORRECT_LUN 12
-
-/* Controlq type codes. */
-#define VIRTIO_SCSI_T_TMF 0
-#define VIRTIO_SCSI_T_AN_QUERY 1
-#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2
-
-/* Valid TMF subtypes. */
-#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0
-#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1
-#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2
-#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3
-#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4
-#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5
-#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6
-#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7
-
-/* Events. */
-#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000
-#define VIRTIO_SCSI_T_NO_EVENT 0
-#define VIRTIO_SCSI_T_TRANSPORT_RESET 1
-#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
-#define VIRTIO_SCSI_T_PARAM_CHANGE 3
-
-/* Reasons for transport reset event */
-#define VIRTIO_SCSI_EVT_RESET_HARD 0
-#define VIRTIO_SCSI_EVT_RESET_RESCAN 1
-#define VIRTIO_SCSI_EVT_RESET_REMOVED 2
-
-/* SCSI command request, followed by CDB and data-out */
-typedef struct {
- uint8_t lun[8]; /* Logical Unit Number */
- uint64_t tag; /* Command identifier */
- uint8_t task_attr; /* Task attribute */
- uint8_t prio;
- uint8_t crn;
-} QEMU_PACKED VirtIOSCSICmdReq;
-
-/* Response, followed by sense data and data-in */
-typedef struct {
- uint32_t sense_len; /* Sense data length */
- uint32_t resid; /* Residual bytes in data buffer */
- uint16_t status_qualifier; /* Status qualifier */
- uint8_t status; /* Command completion status */
- uint8_t response; /* Response values */
-} QEMU_PACKED VirtIOSCSICmdResp;
-
-/* Task Management Request */
-typedef struct {
- uint32_t type;
- uint32_t subtype;
- uint8_t lun[8];
- uint64_t tag;
-} QEMU_PACKED VirtIOSCSICtrlTMFReq;
-
-typedef struct {
- uint8_t response;
-} QEMU_PACKED VirtIOSCSICtrlTMFResp;
-
-/* Asynchronous notification query/subscription */
-typedef struct {
- uint32_t type;
- uint8_t lun[8];
- uint32_t event_requested;
-} QEMU_PACKED VirtIOSCSICtrlANReq;
-
-typedef struct {
- uint32_t event_actual;
- uint8_t response;
-} QEMU_PACKED VirtIOSCSICtrlANResp;
-
-typedef struct {
- uint32_t event;
- uint8_t lun[8];
- uint32_t reason;
-} QEMU_PACKED VirtIOSCSIEvent;
-
-typedef struct {
- uint32_t num_queues;
- uint32_t seg_max;
- uint32_t max_sectors;
- uint32_t cmd_per_lun;
- uint32_t event_info_size;
- uint32_t sense_size;
- uint32_t cdb_size;
- uint16_t max_channel;
- uint16_t max_target;
- uint32_t max_lun;
-} QEMU_PACKED VirtIOSCSIConfig;
+typedef struct virtio_scsi_cmd_req VirtIOSCSICmdReq;
+typedef struct virtio_scsi_cmd_resp VirtIOSCSICmdResp;
+typedef struct virtio_scsi_ctrl_tmf_req VirtIOSCSICtrlTMFReq;
+typedef struct virtio_scsi_ctrl_tmf_resp VirtIOSCSICtrlTMFResp;
+typedef struct virtio_scsi_ctrl_an_req VirtIOSCSICtrlANReq;
+typedef struct virtio_scsi_ctrl_an_resp VirtIOSCSICtrlANResp;
+typedef struct virtio_scsi_event VirtIOSCSIEvent;
+typedef struct virtio_scsi_config VirtIOSCSIConfig;
struct VirtIOSCSIConf {
uint32_t num_queues;
uint32_t cmd_per_lun;
char *vhostfd;
char *wwpn;
+ uint32_t boot_tpgt;
IOThread *iothread;
};
struct VirtIOSCSI;
-typedef struct {
- struct VirtIOSCSI *parent;
- Vring vring;
- EventNotifier host_notifier;
- EventNotifier guest_notifier;
-} VirtIOSCSIVring;
-
typedef struct VirtIOSCSICommon {
VirtIODevice parent_obj;
VirtIOSCSIConf conf;
/* Fields for dataplane below */
AioContext *ctx; /* one iothread per virtio-scsi-pci for now */
- /* Vring is used instead of vq in dataplane code, because of the underlying
- * memory layer thread safety */
- VirtIOSCSIVring *ctrl_vring;
- VirtIOSCSIVring *event_vring;
- VirtIOSCSIVring **cmd_vrings;
bool dataplane_started;
bool dataplane_starting;
bool dataplane_stopping;
- bool dataplane_disabled;
- Notifier migration_state_notifier;
+ bool dataplane_fenced;
+ uint32_t host_features;
} VirtIOSCSI;
typedef struct VirtIOSCSIReq {
+ /* Note:
+ * - fields up to resp_iov are initialized by virtio_scsi_init_req;
+ * - fields starting at vring are zeroed by virtio_scsi_init_req.
+ * */
+ VirtQueueElement elem;
+
VirtIOSCSI *dev;
VirtQueue *vq;
QEMUSGList qsgl;
QEMUIOVector resp_iov;
- /* Note:
- * - fields before elem are initialized by virtio_scsi_init_req;
- * - elem is uninitialized at the time of allocation.
- * - fields after elem are zeroed by virtio_scsi_init_req.
- * */
-
- VirtQueueElement elem;
- /* Set by dataplane code. */
- VirtIOSCSIVring *vring;
-
union {
/* Used for two-stage request submission */
QTAILQ_ENTRY(VirtIOSCSIReq) next;
VirtIOSCSIEvent event;
} resp;
union {
- struct {
- VirtIOSCSICmdReq cmd;
- uint8_t cdb[];
- } QEMU_PACKED;
+ VirtIOSCSICmdReq cmd;
VirtIOSCSICtrlTMFReq tmf;
VirtIOSCSICtrlANReq an;
} req;
} VirtIOSCSIReq;
-QEMU_BUILD_BUG_ON(offsetof(VirtIOSCSIReq, req.cdb) !=
- offsetof(VirtIOSCSIReq, req.cmd) + sizeof(VirtIOSCSICmdReq));
-
-#define DEFINE_VIRTIO_SCSI_PROPERTIES(_state, _conf_field) \
- DEFINE_PROP_UINT32("num_queues", _state, _conf_field.num_queues, 1), \
- DEFINE_PROP_UINT32("max_sectors", _state, _conf_field.max_sectors, 0xFFFF),\
- DEFINE_PROP_UINT32("cmd_per_lun", _state, _conf_field.cmd_per_lun, 128)
-
-#define DEFINE_VIRTIO_SCSI_FEATURES(_state, _feature_field) \
- DEFINE_PROP_BIT("any_layout", _state, _feature_field, \
- VIRTIO_F_ANY_LAYOUT, true), \
- DEFINE_PROP_BIT("hotplug", _state, _feature_field, VIRTIO_SCSI_F_HOTPLUG, \
- true), \
- DEFINE_PROP_BIT("param_change", _state, _feature_field, \
- VIRTIO_SCSI_F_CHANGE, true)
-
-typedef void (*HandleOutput)(VirtIODevice *, VirtQueue *);
-
void virtio_scsi_common_realize(DeviceState *dev, Error **errp,
- HandleOutput ctrl, HandleOutput evt,
- HandleOutput cmd);
+ VirtIOHandleOutput ctrl, VirtIOHandleOutput evt,
+ VirtIOHandleOutput cmd);
void virtio_scsi_common_unrealize(DeviceState *dev, Error **errp);
-void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
-bool virtio_scsi_handle_cmd_req_prepare(VirtIOSCSI *s, VirtIOSCSIReq *req);
-void virtio_scsi_handle_cmd_req_submit(VirtIOSCSI *s, VirtIOSCSIReq *req);
-VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq);
+bool virtio_scsi_handle_event_vq(VirtIOSCSI *s, VirtQueue *vq);
+bool virtio_scsi_handle_cmd_vq(VirtIOSCSI *s, VirtQueue *vq);
+bool virtio_scsi_handle_ctrl_vq(VirtIOSCSI *s, VirtQueue *vq);
+void virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq, VirtIOSCSIReq *req);
void virtio_scsi_free_req(VirtIOSCSIReq *req);
void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
uint32_t event, uint32_t reason);
-void virtio_scsi_set_iothread(VirtIOSCSI *s, IOThread *iothread);
-void virtio_scsi_dataplane_start(VirtIOSCSI *s);
-void virtio_scsi_dataplane_stop(VirtIOSCSI *s);
-void virtio_scsi_vring_push_notify(VirtIOSCSIReq *req);
-VirtIOSCSIReq *virtio_scsi_pop_req_vring(VirtIOSCSI *s,
- VirtIOSCSIVring *vring);
+void virtio_scsi_dataplane_setup(VirtIOSCSI *s, Error **errp);
+int virtio_scsi_dataplane_start(VirtIODevice *s);
+void virtio_scsi_dataplane_stop(VirtIODevice *s);
-#endif /* _QEMU_VIRTIO_SCSI_H */
+#endif /* QEMU_VIRTIO_SCSI_H */
projects / qemu.git / blobdiff