UNCHECKED_GOALS := %clean TAGS cscope ctags dist \
html info pdf txt \
help check-help print-% \
- docker docker-% vm-test vm-build-%
+ docker docker-% vm-help vm-test vm-build-%
print-%:
@echo '$*=$($*)'
config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios $(SRC_PATH)/VERSION
@echo $@ is out-of-date, running configure
- @# TODO: The next lines include code which supports a smooth
- @# transition from old configurations without config.status.
- @# This code can be removed after QEMU 1.7.
- @if test -x config.status; then \
- ./config.status; \
- else \
- sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh; \
- fi
+ @./config.status
else
config-host.mak:
ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
include $(SRC_PATH)/rules.mak
-# notempy and lor are defined in rules.mak
-CONFIG_TOOLS := $(call notempty,$(TOOLS))
+# lor is defined in rules.mak
CONFIG_BLOCK := $(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS))
# Create QEMU_PKGVERSION and FULL_VERSION strings
endif
endif
+# Sphinx does not allow building manuals into the same directory as
+# the source files, so if we're doing an in-tree QEMU build we must
+# build the manuals into a subdirectory (and then install them from
+# there for 'make install'). For an out-of-tree build we can just
+# use the docs/ subdirectory in the build tree as normal.
+ifeq ($(realpath $(SRC_PATH)),$(realpath .))
+MANUAL_BUILDDIR := docs/built
+else
+MANUAL_BUILDDIR := docs
+endif
+
ifdef BUILD_DOCS
-DOCS=qemu-doc.html qemu-doc.txt qemu.1 qemu-img.1 qemu-nbd.8 qemu-ga.8
+DOCS=qemu-doc.html qemu-doc.txt qemu.1 qemu-img.1 qemu-nbd.8 $(MANUAL_BUILDDIR)/interop/qemu-ga.8
DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7
DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7
DOCS+=docs/qemu-block-drivers.7
qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
-SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
-SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
+TARGET_DIRS_RULES := $(foreach t, all clean install, $(addsuffix /$(t), $(TARGET_DIRS)))
-$(SOFTMMU_SUBDIR_RULES): $(authz-obj-y)
-$(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
-$(SOFTMMU_SUBDIR_RULES): $(chardev-obj-y)
-$(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
-$(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
-$(SOFTMMU_SUBDIR_RULES): config-all-devices.mak
-$(SOFTMMU_SUBDIR_RULES): $(edk2-decompressed)
+SOFTMMU_ALL_RULES=$(filter %-softmmu/all, $(TARGET_DIRS_RULES))
+$(SOFTMMU_ALL_RULES): $(authz-obj-y)
+$(SOFTMMU_ALL_RULES): $(block-obj-y)
+$(SOFTMMU_ALL_RULES): $(chardev-obj-y)
+$(SOFTMMU_ALL_RULES): $(crypto-obj-y)
+$(SOFTMMU_ALL_RULES): $(io-obj-y)
+$(SOFTMMU_ALL_RULES): config-all-devices.mak
+$(SOFTMMU_ALL_RULES): $(edk2-decompressed)
-subdir-%:
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
+.PHONY: $(TARGET_DIRS_RULES)
+# The $(TARGET_DIRS_RULES) are of the form SUBDIR/GOAL, so that
+# $(dir $@) yields the sub-directory, and $(notdir $@) yields the sub-goal
+$(TARGET_DIRS_RULES):
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" $(notdir $@),)
DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_srcdir=$(SRC_PATH)/dtc/libfdt
DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
DTC_CPPFLAGS=-I$(BUILD_DIR)/dtc -I$(SRC_PATH)/dtc -I$(SRC_PATH)/dtc/libfdt
-subdir-dtc: .git-submodule-status dtc/libfdt dtc/tests
+.PHONY: dtc/all
+dtc/all: .git-submodule-status dtc/libfdt dtc/tests
$(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt/libfdt.a,)
dtc/%: .git-submodule-status
CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
CAP_CFLAGS += -DCAPSTONE_HAS_X86
-subdir-capstone: .git-submodule-status
+.PHONY: capstone/all
+capstone/all: .git-submodule-status
$(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
-subdir-slirp: .git-submodule-status
- $(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp BUILD_DIR="$(BUILD_DIR)/slirp" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)")
-
-$(SUBDIR_RULES): libqemuutil.a $(common-obj-y) \
+.PHONY: slirp/all
+slirp/all: .git-submodule-status
+ $(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp \
+ BUILD_DIR="$(BUILD_DIR)/slirp" \
+ PKG_CONFIG="$(PKG_CONFIG)" \
+ CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" \
+ CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)")
+
+# Compatibility gunk to keep make working across the rename of targets
+# for recursion, to be removed some time after 4.1.
+subdir-dtc: dtc/all
+subdir-capstone: capstone/all
+subdir-slirp: slirp/all
+
+$(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
$(qom-obj-y) $(crypto-user-obj-$(CONFIG_USER_ONLY))
-ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
+ROM_DIRS = $(addprefix pc-bios/, $(ROMS))
+ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS)))
# Only keep -O and -g cflags
-romsubdir-%:
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/" CFLAGS="$(filter -O% -g%,$(CFLAGS))",)
+.PHONY: $(ROM_DIRS_RULES)
+$(ROM_DIRS_RULES):
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" CFLAGS="$(filter -O% -g%,$(CFLAGS))" $(notdir $@),)
-ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
-
-recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
+.PHONY: recurse-all recurse-clean recurse-install
+recurse-all: $(addsuffix /all, $(TARGET_DIRS) $(ROM_DIRS))
+recurse-clean: $(addsuffix /clean, $(TARGET_DIRS) $(ROM_DIRS))
+recurse-install: $(addsuffix /install, $(TARGET_DIRS))
+$(addsuffix /install, $(TARGET_DIRS)): all
$(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h
$(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.o")
qemu-ga: qemu-ga$(EXESUF) $(QGA_VSS_PROVIDER) $(QEMU_GA_MSI)
endif
-elf2dmp$(EXESUF): LIBS += $(CURL_LIBS)
elf2dmp$(EXESUF): $(elf2dmp-obj-y)
$(call LINK, $^)
"CLEAN", "coverage files")
endif
-clean:
+clean: recurse-clean
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f qemu-options.def
! -path ./roms/edk2/BaseTools/Source/Python/UPT/Dll/sqlite3.dll \
-exec rm {} +
rm -f $(edk2-decompressed)
- rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga$(EXESUF) TAGS cscope.* *.pod *~ */*~
+ rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) TAGS cscope.* *.pod *~ */*~
rm -f fsdev/*.pod scsi/*.pod
rm -f qemu-img-cmds.h
rm -f ui/shader/*-vert.h ui/shader/*-frag.h
rm -f $(foreach f,$(generated-files-y),$(f) $(f)-timestamp)
rm -f qapi-gen-timestamp
rm -rf qga/qapi-generated
- for d in $(ALL_SUBDIRS); do \
- if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
- rm -f $$d/qemu-options.def; \
- done
rm -f config-all-devices.mak
VERSION ?= $(shell cat VERSION)
qemu-%.tar.bz2:
$(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
-# Sphinx does not allow building manuals into the same directory as
-# the source files, so if we're doing an in-tree QEMU build we must
-# build the manuals into a subdirectory (and then install them from
-# there for 'make install'). For an out-of-tree build we can just
-# use the docs/ subdirectory in the build tree as normal.
-ifeq ($(realpath $(SRC_PATH)),$(realpath .))
-MANUAL_BUILDDIR := docs/built
-else
-MANUAL_BUILDDIR := docs
-endif
-
define clean-manual =
rm -rf $(MANUAL_BUILDDIR)/$1/_static
rm -f $(MANUAL_BUILDDIR)/$1/objects.inv $(MANUAL_BUILDDIR)/$1/searchindex.js $(MANUAL_BUILDDIR)/$1/*.html
distclean: clean
rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi qemu-monitor-info.texi
+ rm -f tests/tcg/config-*.mak
rm -f config-all-devices.mak config-all-disas.mak config.status
rm -f $(SUBDIR_DEVICES_MAK)
rm -f po/*.mo tests/qemu-iotests/common.env
ifdef INSTALL_BLOBS
BLOBS=bios.bin bios-256k.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \
-vgabios-ramfb.bin vgabios-bochs-display.bin \
+vgabios-ramfb.bin vgabios-bochs-display.bin vgabios-ati.bin \
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
efi-e1000e.rom efi-vmxnet3.rom \
+qemu-nsis.bmp \
bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin \
s390-ccw.img s390-netboot.img \
-spapr-rtas.bin slof.bin skiboot.lid \
+slof.bin skiboot.lid \
palcode-clipper \
u-boot.e500 u-boot-sam460-20100605.bin \
qemu_vga.ndrv \
edk2-licenses.txt \
-hppa-firmware.img
+hppa-firmware.img \
+opensbi-riscv32-virt-fw_jump.bin \
+opensbi-riscv64-sifive_u-fw_jump.bin opensbi-riscv64-virt-fw_jump.bin
+
DESCS=50-edk2-i386-secure.json 50-edk2-x86_64-secure.json \
60-edk2-aarch64.json 60-edk2-arm.json 60-edk2-i386.json 60-edk2-x86_64.json
endif
# Note that we manually filter-out the non-Sphinx documentation which
-# is currently built into the docs/interop directory in the build tree.
+# is currently built into the docs/interop directory in the build tree,
+# and also any sphinx-built manpages.
define install-manual =
for d in $$(cd $(MANUAL_BUILDDIR) && find $1 -type d); do $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/$$d"; done
-for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done
+for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name '*.[0-9]' -o -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done
endef
# Note that we deliberately do not install the "devel" manual: it is
$(INSTALL_DATA) docs/interop/qemu-qmp-ref.7 "$(DESTDIR)$(mandir)/man7"
$(INSTALL_DATA) docs/qemu-block-drivers.7 "$(DESTDIR)$(mandir)/man7"
$(INSTALL_DATA) docs/qemu-cpu-models.7 "$(DESTDIR)$(mandir)/man7"
-ifneq ($(TOOLS),)
+ifeq ($(CONFIG_TOOLS),y)
$(INSTALL_DATA) qemu-img.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) scripts/qemu-trace-stap.1 "$(DESTDIR)$(mandir)/man1"
endif
ifneq (,$(findstring qemu-ga,$(TOOLS)))
- $(INSTALL_DATA) qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
+ $(INSTALL_DATA) $(MANUAL_BUILDDIR)/interop/qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) docs/interop/qemu-ga-ref.txt "$(DESTDIR)$(qemu_docdir)"
$(INSTALL_DATA) docs/interop/qemu-ga-ref.7 "$(DESTDIR)$(mandir)/man7"
ICON_SIZES=16x16 24x24 32x32 48x48 64x64 128x128 256x256 512x512
install: all $(if $(BUILD_DOCS),install-doc) install-datadir install-localstatedir \
- $(if $(INSTALL_BLOBS),$(edk2-decompressed))
+ $(if $(INSTALL_BLOBS),$(edk2-decompressed)) \
+ recurse-install
ifneq ($(TOOLS),)
- $(call install-prog,$(subst qemu-ga,qemu-ga$(EXESUF),$(TOOLS)),$(DESTDIR)$(bindir))
+ $(call install-prog,$(TOOLS),$(DESTDIR)$(bindir))
endif
ifneq ($(CONFIG_MODULES),)
$(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/firmware"
set -e; tmpf=$$(mktemp); trap 'rm -f -- "$$tmpf"' EXIT; \
for x in $(DESCS); do \
- sed -e 's,@DATADIR@,$(DESTDIR)$(qemu_datadir),' \
+ sed -e 's,@DATADIR@,$(qemu_datadir),' \
"$(SRC_PATH)/pc-bios/descriptors/$$x" > "$$tmpf"; \
$(INSTALL_DATA) "$$tmpf" \
"$(DESTDIR)$(qemu_datadir)/firmware/$$x"; \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
done
$(INSTALL_DATA) $(BUILD_DIR)/trace-events-all "$(DESTDIR)$(qemu_datadir)/trace-events-all"
- for d in $(TARGET_DIRS); do \
- $(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
- done
.PHONY: ctags
ctags:
sphinxdocs: $(MANUAL_BUILDDIR)/devel/index.html $(MANUAL_BUILDDIR)/interop/index.html $(MANUAL_BUILDDIR)/specs/index.html
# Canned command to build a single manual
-build-manual = $(call quiet-command,sphinx-build $(if $(V),,-q) -W -n -b html -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
+# Arguments: $1 = manual name, $2 = Sphinx builder ('html' or 'man')
+build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" sphinx-build $(if $(V),,-q) -W -n -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
# We assume all RST files in the manual's directory are used in it
manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst) $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py
$(MANUAL_BUILDDIR)/devel/index.html: $(call manual-deps,devel)
- $(call build-manual,devel)
+ $(call build-manual,devel,html)
$(MANUAL_BUILDDIR)/interop/index.html: $(call manual-deps,interop)
- $(call build-manual,interop)
+ $(call build-manual,interop,html)
$(MANUAL_BUILDDIR)/specs/index.html: $(call manual-deps,specs)
- $(call build-manual,specs)
+ $(call build-manual,specs,html)
+
+$(MANUAL_BUILDDIR)/interop/qemu-ga.8: $(call manual-deps,interop)
+ $(call build-manual,interop,man)
qemu-options.texi: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
qemu-img.1: qemu-img.texi qemu-option-trace.texi qemu-img-cmds.texi
fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi
qemu-nbd.8: qemu-nbd.texi qemu-option-trace.texi
-qemu-ga.8: qemu-ga.texi
docs/qemu-block-drivers.7: docs/qemu-block-drivers.texi
docs/qemu-cpu-models.7: docs/qemu-cpu-models.texi
scripts/qemu-trace-stap.1: scripts/qemu-trace-stap.texi
txt: qemu-doc.txt docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
qemu-doc.html qemu-doc.info qemu-doc.pdf qemu-doc.txt: \
- qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-option-trace.texi \
- qemu-deprecated.texi qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \
+ qemu-img.texi qemu-nbd.texi qemu-options.texi \
+ qemu-tech.texi qemu-option-trace.texi \
+ qemu-deprecated.texi qemu-monitor.texi qemu-img-cmds.texi \
qemu-monitor-info.texi docs/qemu-block-drivers.texi \
docs/qemu-cpu-models.texi docs/security.texi
INSTDIR=/tmp/qemu-nsis
-$(INSTALLER): $(SRC_PATH)/qemu.nsi
+$(INSTALLER): install-doc $(SRC_PATH)/qemu.nsi
$(MAKE) install prefix=${INSTDIR}
ifdef SIGNCODE
(cd ${INSTDIR}; \
@$(if $(TARGET_DIRS), \
echo 'Architecture specific targets:'; \
$(foreach t, $(TARGET_DIRS), \
- printf " %-30s - Build for %s\\n" $(patsubst %,subdir-%,$(t)) $(t);) \
+ printf " %-30s - Build for %s\\n" $(t)/all $(t);) \
echo '')
@echo 'Cleaning targets:'
@echo ' clean - Remove most generated files but keep the config'
@echo ''
@echo 'Test targets:'
@echo ' check - Run all tests (check-help for details)'
- @echo ' docker - Help about targets running tests inside Docker containers'
- @echo ' vm-test - Help about targets running tests inside VM'
+ @echo ' docker - Help about targets running tests inside containers'
+ @echo ' vm-help - Help about targets running tests inside VM'
@echo ''
@echo 'Documentation targets:'
@echo ' html info pdf txt'
projects / qemu.git / blobdiff