/* QMP checker flags */
#define QMP_ACCEPT_UNKNOWNS 1
-/* Protects mon_list, monitor_qapi_event_state. */
+/* Protects mon_list, monitor_qapi_event_state, monitor_destroyed. */
static QemuMutex monitor_lock;
static GHashTable *monitor_qapi_event_state;
static QTAILQ_HEAD(mon_list, Monitor) mon_list;
+static bool monitor_destroyed;
/* Protects mon_fdsets */
static QemuMutex mon_fdsets_lock;
*/
static void qmp_unregister_commands_hack(void)
{
-#ifndef CONFIG_REPLICATION
- qmp_unregister_command(&qmp_commands, "xen-set-replication");
- qmp_unregister_command(&qmp_commands, "query-xen-replication-status");
- qmp_unregister_command(&qmp_commands, "xen-colo-do-checkpoint");
-#endif
#ifndef TARGET_I386
qmp_unregister_command(&qmp_commands, "rtc-reset-reinjection");
qmp_unregister_command(&qmp_commands, "query-sev");
if (l > line_size)
l = line_size;
if (is_physical) {
- cpu_physical_memory_read(addr, buf, l);
+ AddressSpace *as = cs ? cs->as : &address_space_memory;
+ MemTxResult r = address_space_read(as, addr,
+ MEMTXATTRS_UNSPECIFIED, buf, l);
+ if (r != MEMTX_OK) {
+ monitor_printf(mon, " Cannot access memory\n");
+ break;
+ }
} else {
if (cpu_memory_rw_debug(cs, addr, buf, l, 0) < 0) {
monitor_printf(mon, " Cannot access memory\n");
{
int ret;
uint64_t val;
- char *end;
+ const char *end;
while (qemu_isspace(*p)) {
p++;
* processing commands only on a very busy monitor. To achieve that,
* when we process one request on a specific monitor, we put that
* monitor to the end of mon_list queue.
+ *
+ * Note: if the function returned with non-NULL, then the caller will
+ * be with mon->qmp.qmp_queue_lock held, and the caller is responsible
+ * to release it.
*/
-static QMPRequest *monitor_qmp_requests_pop_any(void)
+static QMPRequest *monitor_qmp_requests_pop_any_with_lock(void)
{
QMPRequest *req_obj = NULL;
Monitor *mon;
QTAILQ_FOREACH(mon, &mon_list, entry) {
qemu_mutex_lock(&mon->qmp.qmp_queue_lock);
req_obj = g_queue_pop_head(mon->qmp.qmp_requests);
- qemu_mutex_unlock(&mon->qmp.qmp_queue_lock);
if (req_obj) {
+ /* With the lock of corresponding queue held */
break;
}
+ qemu_mutex_unlock(&mon->qmp.qmp_queue_lock);
}
if (req_obj) {
static void monitor_qmp_bh_dispatcher(void *data)
{
- QMPRequest *req_obj = monitor_qmp_requests_pop_any();
+ QMPRequest *req_obj = monitor_qmp_requests_pop_any_with_lock();
QDict *rsp;
bool need_resume;
+ Monitor *mon;
if (!req_obj) {
return;
}
+ mon = req_obj->mon;
/* qmp_oob_enabled() might change after "qmp_capabilities" */
- need_resume = !qmp_oob_enabled(req_obj->mon);
+ need_resume = !qmp_oob_enabled(mon) ||
+ mon->qmp.qmp_requests->length == QMP_REQ_QUEUE_LEN_MAX - 1;
+ qemu_mutex_unlock(&mon->qmp.qmp_queue_lock);
if (req_obj->req) {
trace_monitor_qmp_cmd_in_band(qobject_get_try_str(req_obj->id) ?: "");
- monitor_qmp_dispatch(req_obj->mon, req_obj->req, req_obj->id);
+ monitor_qmp_dispatch(mon, req_obj->req, req_obj->id);
} else {
assert(req_obj->err);
rsp = qmp_error_response(req_obj->err);
req_obj->err = NULL;
- monitor_qmp_respond(req_obj->mon, rsp, NULL);
+ monitor_qmp_respond(mon, rsp, NULL);
qobject_unref(rsp);
}
if (need_resume) {
/* Pairs with the monitor_suspend() in handle_qmp_command() */
- monitor_resume(req_obj->mon);
+ monitor_resume(mon);
}
qmp_request_free(req_obj);
qemu_bh_schedule(qmp_dispatcher_bh);
}
-#define QMP_REQ_QUEUE_LEN_MAX (8)
-
static void handle_qmp_command(void *opaque, QObject *req, Error *err)
{
Monitor *mon = opaque;
qemu_mutex_lock(&mon->qmp.qmp_queue_lock);
/*
- * If OOB is not enabled on the current monitor, we'll emulate the
- * old behavior that we won't process the current monitor any more
- * until it has responded. This helps make sure that as long as
- * OOB is not enabled, the server will never drop any command.
+ * Suspend the monitor when we can't queue more requests after
+ * this one. Dequeuing in monitor_qmp_bh_dispatcher() will resume
+ * it. Note that when OOB is disabled, we queue at most one
+ * command, for backward compatibility.
*/
- if (!qmp_oob_enabled(mon)) {
+ if (!qmp_oob_enabled(mon) ||
+ mon->qmp.qmp_requests->length == QMP_REQ_QUEUE_LEN_MAX - 1) {
monitor_suspend(mon);
- } else {
- /* Drop the request if queue is full. */
- if (mon->qmp.qmp_requests->length >= QMP_REQ_QUEUE_LEN_MAX) {
- qemu_mutex_unlock(&mon->qmp.qmp_queue_lock);
- /*
- * FIXME @id's scope is just @mon, and broadcasting it is
- * wrong. If another monitor's client has a command with
- * the same ID in flight, the event will incorrectly claim
- * that command was dropped.
- */
- qapi_event_send_command_dropped(id,
- COMMAND_DROP_REASON_QUEUE_FULL);
- qmp_request_free(req_obj);
- return;
- }
}
/*
* handled in time order. Ownership for req_obj, req, id,
* etc. will be delivered to the handler side.
*/
+ assert(mon->qmp.qmp_requests->length < QMP_REQ_QUEUE_LEN_MAX);
g_queue_push_tail(mon->qmp.qmp_requests, req_obj);
qemu_mutex_unlock(&mon->qmp.qmp_queue_lock);
static void monitor_list_append(Monitor *mon)
{
qemu_mutex_lock(&monitor_lock);
- QTAILQ_INSERT_HEAD(&mon_list, mon, entry);
+ /*
+ * This prevents inserting new monitors during monitor_cleanup().
+ * A cleaner solution would involve the main thread telling other
+ * threads to terminate, waiting for their termination.
+ */
+ if (!monitor_destroyed) {
+ QTAILQ_INSERT_HEAD(&mon_list, mon, entry);
+ mon = NULL;
+ }
qemu_mutex_unlock(&monitor_lock);
+
+ if (mon) {
+ monitor_data_destroy(mon);
+ g_free(mon);
+ }
}
static void monitor_qmp_setup_handlers_bh(void *opaque)
{
Monitor *mon = g_malloc(sizeof(*mon));
bool use_readline = flags & MONITOR_USE_READLINE;
- bool use_oob = flags & MONITOR_USE_OOB;
-
- if (use_oob) {
- if (!qemu_chr_has_feature(chr, QEMU_CHAR_FEATURE_GCONTEXT)) {
- error_report("Monitor out-of-band is not supported with "
- "%s typed chardev backend",
- object_get_typename(OBJECT(chr)));
- exit(1);
- }
- if (use_readline) {
- error_report("Monitor out-of-band is only supported by QMP");
- exit(1);
- }
- }
- monitor_data_init(mon, false, use_oob);
+ /* Note: we run QMP monitor in I/O thread when @chr supports that */
+ monitor_data_init(mon, false,
+ (flags & MONITOR_USE_CONTROL)
+ && qemu_chr_has_feature(chr,
+ QEMU_CHAR_FEATURE_GCONTEXT));
qemu_chr_fe_init(&mon->chr, chr, &error_abort);
mon->flags = flags;
/* Flush output buffers and destroy monitors */
qemu_mutex_lock(&monitor_lock);
+ monitor_destroyed = true;
QTAILQ_FOREACH_SAFE(mon, &mon_list, entry, next) {
QTAILQ_REMOVE(&mon_list, mon, entry);
+ /* Permit QAPI event emission from character frontend release */
+ qemu_mutex_unlock(&monitor_lock);
monitor_flush(mon);
monitor_data_destroy(mon);
+ qemu_mutex_lock(&monitor_lock);
g_free(mon);
}
qemu_mutex_unlock(&monitor_lock);
},{
.name = "pretty",
.type = QEMU_OPT_BOOL,
- },{
- .name = "x-oob",
- .type = QEMU_OPT_BOOL,
},
{ /* end of list */ }
},
projects / qemu.git / blobdiff