#include "block.h"
#include "audio/audio.h"
#include "boards.h"
+#include "blockdev.h"
#undef REG_FMT
-#if TARGET_PHYS_ADDR_BITS == 32
-#define REG_FMT "0x%02x"
-#else
#define REG_FMT "0x%02lx"
-#endif
/* Spitz Flash */
#define FLASH_BASE 0x0c000000
return ecc_digest(&s->ecc, nand_getio(s->nand));
default:
- zaurus_printf("Bad register offset " REG_FMT "\n", addr);
+ zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr);
}
return 0;
}
break;
default:
- zaurus_printf("Bad register offset " REG_FMT "\n", addr);
+ zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr);
}
}
{
int iomemtype;
SLNANDState *s;
- CPUReadMemoryFunc *sl_readfn[] = {
+ CPUReadMemoryFunc * const sl_readfn[] = {
sl_readb,
sl_readb,
sl_readl,
};
- CPUWriteMemoryFunc *sl_writefn[] = {
+ CPUWriteMemoryFunc * const sl_writefn[] = {
sl_writeb,
sl_writeb,
sl_writeb,
else if (size == FLASH_1024M)
s->nand = nand_init(NAND_MFR_SAMSUNG, 0xf1);
- iomemtype = cpu_register_io_memory(0, sl_readfn,
+ iomemtype = cpu_register_io_memory(sl_readfn,
sl_writefn, s);
cpu_register_physical_memory(FLASH_BASE, 0x40, iomemtype);
- register_savevm("sl_flash", 0, 0, sl_save, sl_load, s);
+ register_savevm(NULL, "sl_flash", 0, 0, sl_save, sl_load, s);
}
/* Spitz Keyboard */
s->fifopos = 0;
}
- qemu_mod_timer(s->kbdtimer, qemu_get_clock(vm_clock) + ticks_per_sec / 32);
+ qemu_mod_timer(s->kbdtimer, qemu_get_clock(vm_clock) +
+ get_ticks_per_sec() / 32);
}
static void spitz_keyboard_pre_map(SpitzKeyboardState *s)
spitz_keyboard_pre_map(s);
qemu_add_kbd_event_handler((QEMUPutKBDEvent *) spitz_keyboard_handler, s);
- register_savevm("spitz_keyboard", 0, 0,
+ register_savevm(NULL, "spitz_keyboard", 0, 0,
spitz_keyboard_save, spitz_keyboard_load, s);
}
return 0;
}
-static void spitz_lcdtg_init(SSISlave *dev)
+static int spitz_lcdtg_init(SSISlave *dev)
{
SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev);
s->bl_power = 0;
s->bl_intensity = 0x20;
- register_savevm("spitz-lcdtg", -1, 1,
+ register_savevm(&dev->qdev, "spitz-lcdtg", -1, 1,
spitz_lcdtg_save, spitz_lcdtg_load, s);
+ return 0;
}
/* SSP devices */
return 0;
}
-static void corgi_ssp_init(SSISlave *dev)
+static int corgi_ssp_init(SSISlave *dev)
{
CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev);
qdev_init_gpio_in(&dev->qdev, corgi_ssp_gpio_cs, 3);
- s->bus[0] = ssi_create_bus();
- qdev_attach_child_bus(&dev->qdev, "ssi0", s->bus[0]);
- s->bus[1] = ssi_create_bus();
- qdev_attach_child_bus(&dev->qdev, "ssi1", s->bus[1]);
- s->bus[2] = ssi_create_bus();
- qdev_attach_child_bus(&dev->qdev, "ssi2", s->bus[2]);
-
- register_savevm("spitz_ssp", -1, 1, spitz_ssp_save, spitz_ssp_load, s);
+ s->bus[0] = ssi_create_bus(&dev->qdev, "ssi0");
+ s->bus[1] = ssi_create_bus(&dev->qdev, "ssi1");
+ s->bus[2] = ssi_create_bus(&dev->qdev, "ssi2");
+
+ register_savevm(&dev->qdev, "spitz_ssp", -1, 1,
+ spitz_ssp_save, spitz_ssp_load, s);
+ return 0;
}
static void spitz_ssp_attach(PXA2xxState *cpu)
mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp");
bus = qdev_get_child_bus(mux, "ssi0");
- dev = ssi_create_slave(bus, "spitz-lcdtg");
+ ssi_create_slave(bus, "spitz-lcdtg");
bus = qdev_get_child_bus(mux, "ssi1");
dev = ssi_create_slave(bus, "ads7846");
static void spitz_microdrive_attach(PXA2xxState *cpu, int slot)
{
PCMCIACardState *md;
- int index;
BlockDriverState *bs;
+ DriveInfo *dinfo;
- index = drive_get_index(IF_IDE, 0, 0);
- if (index == -1)
+ dinfo = drive_get(IF_IDE, 0, 0);
+ if (!dinfo)
return;
- bs = drives_table[index].bdrv;
+ bs = dinfo->bdrv;
if (bdrv_is_inserted(bs) && !bdrv_is_removable(bs)) {
- md = dscm1xxxx_init(bs);
+ md = dscm1xxxx_init(dinfo);
pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md);
}
}
#define SPITZ_GPIO_WM 5
-#ifdef HAS_AUDIO
static void spitz_wm8750_addr(void *opaque, int line, int level)
{
i2c_slave *wm = (i2c_slave *) opaque;
else
i2c_set_slave_address(wm, SPITZ_WM_ADDRL);
}
-#endif
static void spitz_i2c_setup(PXA2xxState *cpu)
{
/* Attach the CPU on one end of our I2C bus. */
i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
-#ifdef HAS_AUDIO
DeviceState *wm;
/* Attach a WM8750 to the bus */
cpu->i2s->codec_out = wm8750_dac_dat;
cpu->i2s->codec_in = wm8750_adc_dat;
wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s);
-#endif
}
static void spitz_akita_i2c_setup(PXA2xxState *cpu)
sl_flash_register(cpu, (model == spitz) ? FLASH_128M : FLASH_1024M);
cpu_register_physical_memory(0, SPITZ_ROM,
- qemu_ram_alloc(SPITZ_ROM) | IO_MEM_ROM);
+ qemu_ram_alloc(NULL, "spitz.rom", SPITZ_ROM) | IO_MEM_ROM);
/* Setup peripherals */
spitz_keyboard_register(cpu);
/* A 4.0 GB microdrive is permanently sitting in CF slot 0. */
spitz_microdrive_attach(cpu, 0);
- /* Setup initial (reset) machine state */
- cpu->env->regs[15] = spitz_binfo.loader_start;
-
spitz_binfo.kernel_filename = kernel_filename;
spitz_binfo.kernel_cmdline = kernel_cmdline;
spitz_binfo.initrd_filename = initrd_filename;
kernel_cmdline, initrd_filename, cpu_model, terrier, 0x33f);
}
-QEMUMachine akitapda_machine = {
+static QEMUMachine akitapda_machine = {
.name = "akita",
.desc = "Akita PDA (PXA270)",
.init = akita_init,
};
-QEMUMachine spitzpda_machine = {
+static QEMUMachine spitzpda_machine = {
.name = "spitz",
.desc = "Spitz PDA (PXA270)",
.init = spitz_init,
};
-QEMUMachine borzoipda_machine = {
+static QEMUMachine borzoipda_machine = {
.name = "borzoi",
.desc = "Borzoi PDA (PXA270)",
.init = borzoi_init,
};
-QEMUMachine terrierpda_machine = {
+static QEMUMachine terrierpda_machine = {
.name = "terrier",
.desc = "Terrier PDA (PXA270)",
.init = terrier_init,
};
+static void spitz_machine_init(void)
+{
+ qemu_register_machine(&akitapda_machine);
+ qemu_register_machine(&spitzpda_machine);
+ qemu_register_machine(&borzoipda_machine);
+ qemu_register_machine(&terrierpda_machine);
+}
+
+machine_init(spitz_machine_init);
+
static SSISlaveInfo corgi_ssp_info = {
+ .qdev.name = "corgi-ssp",
+ .qdev.size = sizeof(CorgiSSPState),
.init = corgi_ssp_init,
.transfer = corgi_ssp_transfer
};
static SSISlaveInfo spitz_lcdtg_info = {
+ .qdev.name = "spitz-lcdtg",
+ .qdev.size = sizeof(SpitzLCDTG),
.init = spitz_lcdtg_init,
.transfer = spitz_lcdtg_transfer
};
static void spitz_register_devices(void)
{
- ssi_register_slave("corgi-ssp", sizeof(CorgiSSPState), &corgi_ssp_info);
- ssi_register_slave("spitz-lcdtg", sizeof(SpitzLCDTG), &spitz_lcdtg_info);
+ ssi_register_slave(&corgi_ssp_info);
+ ssi_register_slave(&spitz_lcdtg_info);
}
device_init(spitz_register_devices)
projects / qemu.git / blobdiff