* Authors:
*
- * This is based on the "VHDX Format Specification v0.95", published 4/12/2012
+ * This is based on the "VHDX Format Specification v1.00", published 8/25/2012
* by Microsoft:
- * https://www.microsoft.com/en-us/download/details.aspx?id=29681
+ * https://www.microsoft.com/en-us/download/details.aspx?id=34750
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
#include "qemu/module.h"
#include "qemu/crc32c.h"
#include "block/vhdx.h"
+#include "migration/migration.h"
+#include <uuid/uuid.h>
+#include <glib.h>
+
+/* Options for VHDX creation */
+
+#define VHDX_BLOCK_OPT_LOG_SIZE "log_size"
+#define VHDX_BLOCK_OPT_BLOCK_SIZE "block_size"
+#define VHDX_BLOCK_OPT_ZERO "block_state_zero"
+
+typedef enum VHDXImageType {
+ VHDX_TYPE_DYNAMIC = 0,
+ VHDX_TYPE_FIXED,
+ VHDX_TYPE_DIFFERENCING, /* Currently unsupported */
+} VHDXImageType;
/* Several metadata and region table data entries are identified by
* guids in a MS-specific GUID format. */
/* Each parent type must have a valid GUID; this is for parent images
* of type 'VHDX'. If we were to allow e.g. a QCOW2 parent, we would
* need to make up our own QCOW2 GUID type */
-static const MSGUID parent_vhdx_guid = { .data1 = 0xb04aefb7,
+static const MSGUID parent_vhdx_guid __attribute__((unused))
+ = { .data1 = 0xb04aefb7,
.data2 = 0xd19e,
.data3 = 0x4a81,
.data4 = { 0xb7, 0x89, 0x25, 0xb8,
META_PAGE_83_PRESENT | META_LOGICAL_SECTOR_SIZE_PRESENT | \
META_PHYS_SECTOR_SIZE_PRESENT)
-typedef struct VHDXMetadataEntries {
- VHDXMetadataTableEntry file_parameters_entry;
- VHDXMetadataTableEntry virtual_disk_size_entry;
- VHDXMetadataTableEntry page83_data_entry;
- VHDXMetadataTableEntry logical_sector_size_entry;
- VHDXMetadataTableEntry phys_sector_size_entry;
- VHDXMetadataTableEntry parent_locator_entry;
- uint16_t present;
-} VHDXMetadataEntries;
-
typedef struct VHDXSectorInfo {
uint32_t bat_idx; /* BAT entry index */
uint64_t block_offset; /* block offset, in bytes */
} VHDXSectorInfo;
+/* Calculates new checksum.
+ *
+ * Zero is substituted during crc calculation for the original crc field
+ * crc_offset: byte offset in buf of the buffer crc
+ * buf: buffer pointer
+ * size: size of buffer (must be > crc_offset+4)
+ *
+ * Note: The buffer should have all multi-byte data in little-endian format,
+ * and the resulting checksum is in little endian format.
+ */
+uint32_t vhdx_update_checksum(uint8_t *buf, size_t size, int crc_offset)
+{
+ uint32_t crc;
+ assert(buf != NULL);
+ assert(size > (crc_offset + sizeof(crc)));
-typedef struct BDRVVHDXState {
- CoMutex lock;
-
- int curr_header;
- VHDXHeader *headers[2];
-
- VHDXRegionTableHeader rt;
- VHDXRegionTableEntry bat_rt; /* region table for the BAT */
- VHDXRegionTableEntry metadata_rt; /* region table for the metadata */
-
- VHDXMetadataTableHeader metadata_hdr;
- VHDXMetadataEntries metadata_entries;
-
- VHDXFileParameters params;
- uint32_t block_size;
- uint32_t block_size_bits;
- uint32_t sectors_per_block;
- uint32_t sectors_per_block_bits;
-
- uint64_t virtual_disk_size;
- uint32_t logical_sector_size;
- uint32_t physical_sector_size;
-
- uint64_t chunk_ratio;
- uint32_t chunk_ratio_bits;
- uint32_t logical_sector_size_bits;
-
- uint32_t bat_entries;
- VHDXBatEntry *bat;
- uint64_t bat_offset;
-
- VHDXParentLocatorHeader parent_header;
- VHDXParentLocatorEntry *parent_entries;
+ memset(buf + crc_offset, 0, sizeof(crc));
+ crc = crc32c(0xffffffff, buf, size);
+ cpu_to_le32s(&crc);
+ memcpy(buf + crc_offset, &crc, sizeof(crc));
-} BDRVVHDXState;
+ return crc;
+}
uint32_t vhdx_checksum_calc(uint32_t crc, uint8_t *buf, size_t size,
int crc_offset)
}
+/*
+ * This generates a UUID that is compliant with the MS GUIDs used
+ * in the VHDX spec (and elsewhere).
+ */
+void vhdx_guid_generate(MSGUID *guid)
+{
+ uuid_t uuid;
+ assert(guid != NULL);
+
+ uuid_generate(uuid);
+ memcpy(guid, uuid, sizeof(MSGUID));
+}
+
+/* Check for region overlaps inside the VHDX image */
+static int vhdx_region_check(BDRVVHDXState *s, uint64_t start, uint64_t length)
+{
+ int ret = 0;
+ uint64_t end;
+ VHDXRegionEntry *r;
+
+ end = start + length;
+ QLIST_FOREACH(r, &s->regions, entries) {
+ if (!((start >= r->end) || (end <= r->start))) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ }
+
+exit:
+ return ret;
+}
+
+/* Register a region for future checks */
+static void vhdx_region_register(BDRVVHDXState *s,
+ uint64_t start, uint64_t length)
+{
+ VHDXRegionEntry *r;
+
+ r = g_malloc0(sizeof(*r));
+
+ r->start = start;
+ r->end = start + length;
+
+ QLIST_INSERT_HEAD(&s->regions, r, entries);
+}
+
+/* Free all registered regions */
+static void vhdx_region_unregister_all(BDRVVHDXState *s)
+{
+ VHDXRegionEntry *r, *r_next;
+
+ QLIST_FOREACH_SAFE(r, &s->regions, entries, r_next) {
+ QLIST_REMOVE(r, entries);
+ g_free(r);
+ }
+}
+
+static void vhdx_set_shift_bits(BDRVVHDXState *s)
+{
+ s->logical_sector_size_bits = 31 - clz32(s->logical_sector_size);
+ s->sectors_per_block_bits = 31 - clz32(s->sectors_per_block);
+ s->chunk_ratio_bits = 63 - clz64(s->chunk_ratio);
+ s->block_size_bits = 31 - clz32(s->block_size);
+}
+
/*
* Per the MS VHDX Specification, for every VHDX file:
* - The header section is fixed size - 1 MB
return 0;
}
-/* All VHDX structures on disk are little endian */
-static void vhdx_header_le_import(VHDXHeader *h)
+/*
+ * Writes the header to the specified offset.
+ *
+ * This will optionally read in buffer data from disk (otherwise zero-fill),
+ * and then update the header checksum. Header is converted to proper
+ * endianness before being written to the specified file offset
+ */
+static int vhdx_write_header(BlockDriverState *bs_file, VHDXHeader *hdr,
+ uint64_t offset, bool read)
+{
+ uint8_t *buffer = NULL;
+ int ret;
+ VHDXHeader *header_le;
+
+ assert(bs_file != NULL);
+ assert(hdr != NULL);
+
+ /* the header checksum is not over just the packed size of VHDXHeader,
+ * but rather over the entire 'reserved' range for the header, which is
+ * 4KB (VHDX_HEADER_SIZE). */
+
+ buffer = qemu_blockalign(bs_file, VHDX_HEADER_SIZE);
+ if (read) {
+ /* if true, we can't assume the extra reserved bytes are 0 */
+ ret = bdrv_pread(bs_file, offset, buffer, VHDX_HEADER_SIZE);
+ if (ret < 0) {
+ goto exit;
+ }
+ } else {
+ memset(buffer, 0, VHDX_HEADER_SIZE);
+ }
+
+ /* overwrite the actual VHDXHeader portion */
+ header_le = (VHDXHeader *)buffer;
+ memcpy(header_le, hdr, sizeof(VHDXHeader));
+ vhdx_header_le_export(hdr, header_le);
+ vhdx_update_checksum(buffer, VHDX_HEADER_SIZE,
+ offsetof(VHDXHeader, checksum));
+ ret = bdrv_pwrite_sync(bs_file, offset, header_le, sizeof(VHDXHeader));
+
+exit:
+ qemu_vfree(buffer);
+ return ret;
+}
+
+/* Update the VHDX headers
+ *
+ * This follows the VHDX spec procedures for header updates.
+ *
+ * - non-current header is updated with largest sequence number
+ */
+static int vhdx_update_header(BlockDriverState *bs, BDRVVHDXState *s,
+ bool generate_data_write_guid, MSGUID *log_guid)
{
- assert(h != NULL);
+ int ret = 0;
+ int hdr_idx = 0;
+ uint64_t header_offset = VHDX_HEADER1_OFFSET;
- le32_to_cpus(&h->signature);
- le32_to_cpus(&h->checksum);
- le64_to_cpus(&h->sequence_number);
+ VHDXHeader *active_header;
+ VHDXHeader *inactive_header;
- leguid_to_cpus(&h->file_write_guid);
- leguid_to_cpus(&h->data_write_guid);
- leguid_to_cpus(&h->log_guid);
+ /* operate on the non-current header */
+ if (s->curr_header == 0) {
+ hdr_idx = 1;
+ header_offset = VHDX_HEADER2_OFFSET;
+ }
+
+ active_header = s->headers[s->curr_header];
+ inactive_header = s->headers[hdr_idx];
+
+ inactive_header->sequence_number = active_header->sequence_number + 1;
+
+ /* a new file guid must be generated before any file write, including
+ * headers */
+ inactive_header->file_write_guid = s->session_guid;
+
+ /* a new data guid only needs to be generated before any guest-visible
+ * writes (i.e. something observable via virtual disk read) */
+ if (generate_data_write_guid) {
+ vhdx_guid_generate(&inactive_header->data_write_guid);
+ }
+
+ /* update the log guid if present */
+ if (log_guid) {
+ inactive_header->log_guid = *log_guid;
+ }
- le16_to_cpus(&h->log_version);
- le16_to_cpus(&h->version);
- le32_to_cpus(&h->log_length);
- le64_to_cpus(&h->log_offset);
+ ret = vhdx_write_header(bs->file, inactive_header, header_offset, true);
+ if (ret < 0) {
+ goto exit;
+ }
+ s->curr_header = hdr_idx;
+
+exit:
+ return ret;
}
+/*
+ * The VHDX spec calls for header updates to be performed twice, so that both
+ * the current and non-current header have valid info
+ */
+int vhdx_update_headers(BlockDriverState *bs, BDRVVHDXState *s,
+ bool generate_data_write_guid, MSGUID *log_guid)
+{
+ int ret;
+
+ ret = vhdx_update_header(bs, s, generate_data_write_guid, log_guid);
+ if (ret < 0) {
+ return ret;
+ }
+ ret = vhdx_update_header(bs, s, generate_data_write_guid, log_guid);
+ return ret;
+}
/* opens the specified header block from the VHDX file header section */
-static int vhdx_parse_header(BlockDriverState *bs, BDRVVHDXState *s)
+static void vhdx_parse_header(BlockDriverState *bs, BDRVVHDXState *s,
+ Error **errp)
{
- int ret = 0;
+ int ret;
VHDXHeader *header1;
VHDXHeader *header2;
bool h1_valid = false;
uint64_t h2_seq = 0;
uint8_t *buffer;
+ /* header1 & header2 are freed in vhdx_close() */
header1 = qemu_blockalign(bs, sizeof(VHDXHeader));
header2 = qemu_blockalign(bs, sizeof(VHDXHeader));
}
/* copy over just the relevant portion that we need */
memcpy(header1, buffer, sizeof(VHDXHeader));
- vhdx_header_le_import(header1);
- if (vhdx_checksum_is_valid(buffer, VHDX_HEADER_SIZE, 4) &&
- !memcmp(&header1->signature, "head", 4) &&
- header1->version == 1) {
- h1_seq = header1->sequence_number;
- h1_valid = true;
+ if (vhdx_checksum_is_valid(buffer, VHDX_HEADER_SIZE, 4)) {
+ vhdx_header_le_import(header1);
+ if (header1->signature == VHDX_HEADER_SIGNATURE &&
+ header1->version == 1) {
+ h1_seq = header1->sequence_number;
+ h1_valid = true;
+ }
}
ret = bdrv_pread(bs->file, VHDX_HEADER2_OFFSET, buffer, VHDX_HEADER_SIZE);
}
/* copy over just the relevant portion that we need */
memcpy(header2, buffer, sizeof(VHDXHeader));
- vhdx_header_le_import(header2);
- if (vhdx_checksum_is_valid(buffer, VHDX_HEADER_SIZE, 4) &&
- !memcmp(&header2->signature, "head", 4) &&
- header2->version == 1) {
- h2_seq = header2->sequence_number;
- h2_valid = true;
+ if (vhdx_checksum_is_valid(buffer, VHDX_HEADER_SIZE, 4)) {
+ vhdx_header_le_import(header2);
+ if (header2->signature == VHDX_HEADER_SIGNATURE &&
+ header2->version == 1) {
+ h2_seq = header2->sequence_number;
+ h2_valid = true;
+ }
}
/* If there is only 1 valid header (or no valid headers), we
} else if (!h1_valid && h2_valid) {
s->curr_header = 1;
} else if (!h1_valid && !h2_valid) {
- ret = -EINVAL;
goto fail;
} else {
/* If both headers are valid, then we choose the active one by the
} else if (h2_seq > h1_seq) {
s->curr_header = 1;
} else {
- ret = -EINVAL;
- goto fail;
+ /* The Microsoft Disk2VHD tool will create 2 identical
+ * headers, with identical sequence numbers. If the headers are
+ * identical, don't consider the file corrupt */
+ if (!memcmp(header1, header2, sizeof(VHDXHeader))) {
+ s->curr_header = 0;
+ } else {
+ goto fail;
+ }
}
}
- ret = 0;
-
+ vhdx_region_register(s, s->headers[s->curr_header]->log_offset,
+ s->headers[s->curr_header]->log_length);
goto exit;
fail:
- qerror_report(ERROR_CLASS_GENERIC_ERROR, "No valid VHDX header found");
+ error_setg_errno(errp, -ret, "No valid VHDX header found");
qemu_vfree(header1);
qemu_vfree(header2);
s->headers[0] = NULL;
s->headers[1] = NULL;
exit:
qemu_vfree(buffer);
- return ret;
}
goto fail;
}
memcpy(&s->rt, buffer, sizeof(s->rt));
- le32_to_cpus(&s->rt.signature);
- le32_to_cpus(&s->rt.checksum);
- le32_to_cpus(&s->rt.entry_count);
- le32_to_cpus(&s->rt.reserved);
offset += sizeof(s->rt);
- if (!vhdx_checksum_is_valid(buffer, VHDX_HEADER_BLOCK_SIZE, 4) ||
- memcmp(&s->rt.signature, "regi", 4)) {
+ if (!vhdx_checksum_is_valid(buffer, VHDX_HEADER_BLOCK_SIZE, 4)) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ vhdx_region_header_le_import(&s->rt);
+
+ if (s->rt.signature != VHDX_REGION_SIGNATURE) {
ret = -EINVAL;
goto fail;
}
+
/* Per spec, maximum region table entry count is 2047 */
if (s->rt.entry_count > 2047) {
ret = -EINVAL;
memcpy(&rt_entry, buffer + offset, sizeof(rt_entry));
offset += sizeof(rt_entry);
- leguid_to_cpus(&rt_entry.guid);
- le64_to_cpus(&rt_entry.file_offset);
- le32_to_cpus(&rt_entry.length);
- le32_to_cpus(&rt_entry.data_bits);
+ vhdx_region_entry_le_import(&rt_entry);
+
+ /* check for region overlap between these entries, and any
+ * other memory regions in the file */
+ ret = vhdx_region_check(s, rt_entry.file_offset, rt_entry.length);
+ if (ret < 0) {
+ goto fail;
+ }
+
+ vhdx_region_register(s, rt_entry.file_offset, rt_entry.length);
/* see if we recognize the entry */
if (guid_eq(rt_entry.guid, bat_guid)) {
goto fail;
}
}
+
+ if (!bat_rt_found || !metadata_rt_found) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
ret = 0;
fail:
memcpy(&s->metadata_hdr, buffer, sizeof(s->metadata_hdr));
offset += sizeof(s->metadata_hdr);
- le64_to_cpus(&s->metadata_hdr.signature);
- le16_to_cpus(&s->metadata_hdr.reserved);
- le16_to_cpus(&s->metadata_hdr.entry_count);
+ vhdx_metadata_header_le_import(&s->metadata_hdr);
- if (memcmp(&s->metadata_hdr.signature, "metadata", 8)) {
+ if (s->metadata_hdr.signature != VHDX_METADATA_SIGNATURE) {
ret = -EINVAL;
goto exit;
}
memcpy(&md_entry, buffer + offset, sizeof(md_entry));
offset += sizeof(md_entry);
- leguid_to_cpus(&md_entry.item_id);
- le32_to_cpus(&md_entry.offset);
- le32_to_cpus(&md_entry.length);
- le32_to_cpus(&md_entry.data_bits);
- le32_to_cpus(&md_entry.reserved2);
+ vhdx_metadata_entry_le_import(&md_entry);
if (guid_eq(md_entry.item_id, file_param_guid)) {
if (s->metadata_entries.present & META_FILE_PARAMETER_PRESENT) {
le32_to_cpus(&s->logical_sector_size);
le32_to_cpus(&s->physical_sector_size);
- if (s->logical_sector_size == 0 || s->params.block_size == 0) {
+ if (s->params.block_size < VHDX_BLOCK_SIZE_MIN ||
+ s->params.block_size > VHDX_BLOCK_SIZE_MAX) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* only 2 supported sector sizes */
+ if (s->logical_sector_size != 512 && s->logical_sector_size != 4096) {
ret = -EINVAL;
goto exit;
}
- /* both block_size and sector_size are guaranteed powers of 2 */
+ /* Both block_size and sector_size are guaranteed powers of 2, below.
+ Due to range checks above, s->sectors_per_block can never be < 256 */
s->sectors_per_block = s->params.block_size / s->logical_sector_size;
s->chunk_ratio = (VHDX_MAX_SECTORS_PER_BLOCK) *
(uint64_t)s->logical_sector_size /
goto exit;
}
- s->logical_sector_size_bits = 31 - clz32(s->logical_sector_size);
- s->sectors_per_block_bits = 31 - clz32(s->sectors_per_block);
- s->chunk_ratio_bits = 63 - clz64(s->chunk_ratio);
- s->block_size_bits = 31 - clz32(s->block_size);
+ vhdx_set_shift_bits(s);
ret = 0;
return ret;
}
-/* Parse the replay log. Per the VHDX spec, if the log is present
- * it must be replayed prior to opening the file, even read-only.
- *
- * If read-only, we must replay the log in RAM (or refuse to open
- * a dirty VHDX file read-only */
-static int vhdx_parse_log(BlockDriverState *bs, BDRVVHDXState *s)
+/*
+ * Calculate the number of BAT entries, including sector
+ * bitmap entries.
+ */
+static void vhdx_calc_bat_entries(BDRVVHDXState *s)
{
- int ret = 0;
- int i;
- VHDXHeader *hdr;
-
- hdr = s->headers[s->curr_header];
+ uint32_t data_blocks_cnt, bitmap_blocks_cnt;
- /* either the log guid, or log length is zero,
- * then a replay log is present */
- for (i = 0; i < sizeof(hdr->log_guid.data4); i++) {
- ret |= hdr->log_guid.data4[i];
- }
- if (hdr->log_guid.data1 == 0 &&
- hdr->log_guid.data2 == 0 &&
- hdr->log_guid.data3 == 0 &&
- ret == 0) {
- goto exit;
+ data_blocks_cnt = s->virtual_disk_size >> s->block_size_bits;
+ if (s->virtual_disk_size - (data_blocks_cnt << s->block_size_bits)) {
+ data_blocks_cnt++;
}
-
- /* per spec, only log version of 0 is supported */
- if (hdr->log_version != 0) {
- ret = -EINVAL;
- goto exit;
+ bitmap_blocks_cnt = data_blocks_cnt >> s->chunk_ratio_bits;
+ if (data_blocks_cnt - (bitmap_blocks_cnt << s->chunk_ratio_bits)) {
+ bitmap_blocks_cnt++;
}
- if (hdr->log_length == 0) {
- goto exit;
+ if (s->parent_entries) {
+ s->bat_entries = bitmap_blocks_cnt * (s->chunk_ratio + 1);
+ } else {
+ s->bat_entries = data_blocks_cnt +
+ ((data_blocks_cnt - 1) >> s->chunk_ratio_bits);
}
- /* We currently do not support images with logs to replay */
- ret = -ENOTSUP;
-
-exit:
- return ret;
}
+static void vhdx_close(BlockDriverState *bs)
+{
+ BDRVVHDXState *s = bs->opaque;
+ qemu_vfree(s->headers[0]);
+ s->headers[0] = NULL;
+ qemu_vfree(s->headers[1]);
+ s->headers[1] = NULL;
+ qemu_vfree(s->bat);
+ s->bat = NULL;
+ qemu_vfree(s->parent_entries);
+ s->parent_entries = NULL;
+ migrate_del_blocker(s->migration_blocker);
+ error_free(s->migration_blocker);
+ qemu_vfree(s->log.hdr);
+ s->log.hdr = NULL;
+ vhdx_region_unregister_all(s);
+}
-static int vhdx_open(BlockDriverState *bs, QDict *options, int flags)
+static int vhdx_open(BlockDriverState *bs, QDict *options, int flags,
+ Error **errp)
{
BDRVVHDXState *s = bs->opaque;
int ret = 0;
uint32_t i;
uint64_t signature;
- uint32_t data_blocks_cnt, bitmap_blocks_cnt;
-
+ Error *local_err = NULL;
s->bat = NULL;
+ s->first_visible_write = true;
qemu_co_mutex_init(&s->lock);
+ QLIST_INIT(&s->regions);
/* validate the file signature */
ret = bdrv_pread(bs->file, 0, &signature, sizeof(uint64_t));
goto fail;
}
- ret = vhdx_parse_header(bs, s);
- if (ret) {
+ /* This is used for any header updates, for the file_write_guid.
+ * The spec dictates that a new value should be used for the first
+ * header update */
+ vhdx_guid_generate(&s->session_guid);
+
+ vhdx_parse_header(bs, s, &local_err);
+ if (local_err != NULL) {
+ error_propagate(errp, local_err);
+ ret = -EINVAL;
goto fail;
}
- ret = vhdx_parse_log(bs, s);
- if (ret) {
+ ret = vhdx_parse_log(bs, s, &s->log_replayed_on_open, errp);
+ if (ret < 0) {
goto fail;
}
ret = vhdx_open_region_tables(bs, s);
- if (ret) {
+ if (ret < 0) {
goto fail;
}
ret = vhdx_parse_metadata(bs, s);
- if (ret) {
+ if (ret < 0) {
goto fail;
}
+
s->block_size = s->params.block_size;
/* the VHDX spec dictates that virtual_disk_size is always a multiple of
* logical_sector_size */
bs->total_sectors = s->virtual_disk_size >> s->logical_sector_size_bits;
- data_blocks_cnt = s->virtual_disk_size >> s->block_size_bits;
- if (s->virtual_disk_size - (data_blocks_cnt << s->block_size_bits)) {
- data_blocks_cnt++;
- }
- bitmap_blocks_cnt = data_blocks_cnt >> s->chunk_ratio_bits;
- if (data_blocks_cnt - (bitmap_blocks_cnt << s->chunk_ratio_bits)) {
- bitmap_blocks_cnt++;
- }
-
- if (s->parent_entries) {
- s->bat_entries = bitmap_blocks_cnt * (s->chunk_ratio + 1);
- } else {
- s->bat_entries = data_blocks_cnt +
- ((data_blocks_cnt - 1) >> s->chunk_ratio_bits);
- }
+ vhdx_calc_bat_entries(s);
s->bat_offset = s->bat_rt.file_offset;
goto fail;
}
- s->bat = qemu_blockalign(bs, s->bat_rt.length);
+ /* s->bat is freed in vhdx_close() */
+ s->bat = qemu_try_blockalign(bs->file, s->bat_rt.length);
+ if (s->bat == NULL) {
+ ret = -ENOMEM;
+ goto fail;
+ }
ret = bdrv_pread(bs->file, s->bat_offset, s->bat, s->bat_rt.length);
if (ret < 0) {
goto fail;
}
+ uint64_t payblocks = s->chunk_ratio;
+ /* endian convert, and verify populated BAT field file offsets against
+ * region table and log entries */
for (i = 0; i < s->bat_entries; i++) {
le64_to_cpus(&s->bat[i]);
+ if (payblocks--) {
+ /* payload bat entries */
+ if ((s->bat[i] & VHDX_BAT_STATE_BIT_MASK) ==
+ PAYLOAD_BLOCK_FULLY_PRESENT) {
+ ret = vhdx_region_check(s, s->bat[i] & VHDX_BAT_FILE_OFF_MASK,
+ s->block_size);
+ if (ret < 0) {
+ goto fail;
+ }
+ }
+ } else {
+ payblocks = s->chunk_ratio;
+ /* Once differencing files are supported, verify sector bitmap
+ * blocks here */
+ }
}
if (flags & BDRV_O_RDWR) {
- ret = -ENOTSUP;
- goto fail;
+ ret = vhdx_update_headers(bs, s, false, NULL);
+ if (ret < 0) {
+ goto fail;
+ }
}
- /* TODO: differencing files, write */
+ /* TODO: differencing files */
+
+ /* Disable migration when VHDX images are used */
+ error_setg(&s->migration_blocker, "The vhdx format used by node '%s' "
+ "does not support live migration",
+ bdrv_get_device_or_node_name(bs));
+ migrate_add_blocker(s->migration_blocker);
return 0;
fail:
- qemu_vfree(s->headers[0]);
- qemu_vfree(s->headers[1]);
- qemu_vfree(s->bat);
- qemu_vfree(s->parent_entries);
+ vhdx_close(bs);
return ret;
}
sinfo->bytes_avail = sinfo->sectors_avail << s->logical_sector_size_bits;
- sinfo->file_offset = s->bat[sinfo->bat_idx] >> VHDX_BAT_FILE_OFF_BITS;
+ sinfo->file_offset = s->bat[sinfo->bat_idx] & VHDX_BAT_FILE_OFF_MASK;
sinfo->block_offset = block_offset << s->logical_sector_size_bits;
* in the block, and add in the payload data block offset
* in the file, in bytes, to get the final read address */
- sinfo->file_offset <<= 20; /* now in bytes, rather than 1MB units */
sinfo->file_offset += sinfo->block_offset;
}
+static int vhdx_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
+{
+ BDRVVHDXState *s = bs->opaque;
+
+ bdi->cluster_size = s->block_size;
+
+ bdi->unallocated_blocks_are_zero =
+ (s->params.data_bits & VHDX_PARAMS_HAS_PARENT) == 0;
+
+ return 0;
+}
+
static coroutine_fn int vhdx_co_readv(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov)
/* check the payload block state */
switch (s->bat[sinfo.bat_idx] & VHDX_BAT_STATE_BIT_MASK) {
case PAYLOAD_BLOCK_NOT_PRESENT: /* fall through */
- case PAYLOAD_BLOCK_UNDEFINED: /* fall through */
- case PAYLOAD_BLOCK_UNMAPPED: /* fall through */
+ case PAYLOAD_BLOCK_UNDEFINED:
+ case PAYLOAD_BLOCK_UNMAPPED:
+ case PAYLOAD_BLOCK_UNMAPPED_v095:
case PAYLOAD_BLOCK_ZERO:
/* return zero */
qemu_iovec_memset(&hd_qiov, 0, 0, sinfo.bytes_avail);
break;
- case PAYLOAD_BLOCK_FULL_PRESENT:
+ case PAYLOAD_BLOCK_FULLY_PRESENT:
qemu_co_mutex_unlock(&s->lock);
ret = bdrv_co_readv(bs->file,
sinfo.file_offset >> BDRV_SECTOR_BITS,
return ret;
}
+/*
+ * Allocate a new payload block at the end of the file.
+ *
+ * Allocation will happen at 1MB alignment inside the file
+ *
+ * Returns the file offset start of the new payload block
+ */
+static int vhdx_allocate_block(BlockDriverState *bs, BDRVVHDXState *s,
+ uint64_t *new_offset)
+{
+ *new_offset = bdrv_getlength(bs->file);
+
+ /* per the spec, the address for a block is in units of 1MB */
+ *new_offset = ROUND_UP(*new_offset, 1024 * 1024);
+
+ return bdrv_truncate(bs->file, *new_offset + s->block_size);
+}
+
+/*
+ * Update the BAT table entry with the new file offset, and the new entry
+ * state */
+static void vhdx_update_bat_table_entry(BlockDriverState *bs, BDRVVHDXState *s,
+ VHDXSectorInfo *sinfo,
+ uint64_t *bat_entry_le,
+ uint64_t *bat_offset, int state)
+{
+ /* The BAT entry is a uint64, with 44 bits for the file offset in units of
+ * 1MB, and 3 bits for the block state. */
+ if ((state == PAYLOAD_BLOCK_ZERO) ||
+ (state == PAYLOAD_BLOCK_UNDEFINED) ||
+ (state == PAYLOAD_BLOCK_NOT_PRESENT) ||
+ (state == PAYLOAD_BLOCK_UNMAPPED)) {
+ s->bat[sinfo->bat_idx] = 0; /* For PAYLOAD_BLOCK_ZERO, the
+ FileOffsetMB field is denoted as
+ 'reserved' in the v1.0 spec. If it is
+ non-zero, MS Hyper-V will fail to read
+ the disk image */
+ } else {
+ s->bat[sinfo->bat_idx] = sinfo->file_offset;
+ }
+
+ s->bat[sinfo->bat_idx] |= state & VHDX_BAT_STATE_BIT_MASK;
+ *bat_entry_le = cpu_to_le64(s->bat[sinfo->bat_idx]);
+ *bat_offset = s->bat_offset + sinfo->bat_idx * sizeof(VHDXBatEntry);
+
+}
+
+/* Per the spec, on the first write of guest-visible data to the file the
+ * data write guid must be updated in the header */
+int vhdx_user_visible_write(BlockDriverState *bs, BDRVVHDXState *s)
+{
+ int ret = 0;
+ if (s->first_visible_write) {
+ s->first_visible_write = false;
+ ret = vhdx_update_headers(bs, s, true, NULL);
+ }
+ return ret;
+}
static coroutine_fn int vhdx_co_writev(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov)
{
- return -ENOTSUP;
+ int ret = -ENOTSUP;
+ BDRVVHDXState *s = bs->opaque;
+ VHDXSectorInfo sinfo;
+ uint64_t bytes_done = 0;
+ uint64_t bat_entry = 0;
+ uint64_t bat_entry_offset = 0;
+ QEMUIOVector hd_qiov;
+ struct iovec iov1 = { 0 };
+ struct iovec iov2 = { 0 };
+ int sectors_to_write;
+ int bat_state;
+ uint64_t bat_prior_offset = 0;
+ bool bat_update = false;
+
+ qemu_iovec_init(&hd_qiov, qiov->niov);
+
+ qemu_co_mutex_lock(&s->lock);
+
+ ret = vhdx_user_visible_write(bs, s);
+ if (ret < 0) {
+ goto exit;
+ }
+
+ while (nb_sectors > 0) {
+ bool use_zero_buffers = false;
+ bat_update = false;
+ if (s->params.data_bits & VHDX_PARAMS_HAS_PARENT) {
+ /* not supported yet */
+ ret = -ENOTSUP;
+ goto exit;
+ } else {
+ vhdx_block_translate(s, sector_num, nb_sectors, &sinfo);
+ sectors_to_write = sinfo.sectors_avail;
+
+ qemu_iovec_reset(&hd_qiov);
+ /* check the payload block state */
+ bat_state = s->bat[sinfo.bat_idx] & VHDX_BAT_STATE_BIT_MASK;
+ switch (bat_state) {
+ case PAYLOAD_BLOCK_ZERO:
+ /* in this case, we need to preserve zero writes for
+ * data that is not part of this write, so we must pad
+ * the rest of the buffer to zeroes */
+
+ /* if we are on a posix system with ftruncate() that extends
+ * a file, then it is zero-filled for us. On Win32, the raw
+ * layer uses SetFilePointer and SetFileEnd, which does not
+ * zero fill AFAIK */
+
+ /* Queue another write of zero buffers if the underlying file
+ * does not zero-fill on file extension */
+
+ if (bdrv_has_zero_init(bs->file) == 0) {
+ use_zero_buffers = true;
+
+ /* zero fill the front, if any */
+ if (sinfo.block_offset) {
+ iov1.iov_len = sinfo.block_offset;
+ iov1.iov_base = qemu_blockalign(bs, iov1.iov_len);
+ memset(iov1.iov_base, 0, iov1.iov_len);
+ qemu_iovec_concat_iov(&hd_qiov, &iov1, 1, 0,
+ iov1.iov_len);
+ sectors_to_write += iov1.iov_len >> BDRV_SECTOR_BITS;
+ }
+
+ /* our actual data */
+ qemu_iovec_concat(&hd_qiov, qiov, bytes_done,
+ sinfo.bytes_avail);
+
+ /* zero fill the back, if any */
+ if ((sinfo.bytes_avail - sinfo.block_offset) <
+ s->block_size) {
+ iov2.iov_len = s->block_size -
+ (sinfo.bytes_avail + sinfo.block_offset);
+ iov2.iov_base = qemu_blockalign(bs, iov2.iov_len);
+ memset(iov2.iov_base, 0, iov2.iov_len);
+ qemu_iovec_concat_iov(&hd_qiov, &iov2, 1, 0,
+ iov2.iov_len);
+ sectors_to_write += iov2.iov_len >> BDRV_SECTOR_BITS;
+ }
+ }
+ /* fall through */
+ case PAYLOAD_BLOCK_NOT_PRESENT: /* fall through */
+ case PAYLOAD_BLOCK_UNMAPPED:
+ case PAYLOAD_BLOCK_UNMAPPED_v095:
+ case PAYLOAD_BLOCK_UNDEFINED:
+ bat_prior_offset = sinfo.file_offset;
+ ret = vhdx_allocate_block(bs, s, &sinfo.file_offset);
+ if (ret < 0) {
+ goto exit;
+ }
+ /* once we support differencing files, this may also be
+ * partially present */
+ /* update block state to the newly specified state */
+ vhdx_update_bat_table_entry(bs, s, &sinfo, &bat_entry,
+ &bat_entry_offset,
+ PAYLOAD_BLOCK_FULLY_PRESENT);
+ bat_update = true;
+ /* since we just allocated a block, file_offset is the
+ * beginning of the payload block. It needs to be the
+ * write address, which includes the offset into the block */
+ if (!use_zero_buffers) {
+ sinfo.file_offset += sinfo.block_offset;
+ }
+ /* fall through */
+ case PAYLOAD_BLOCK_FULLY_PRESENT:
+ /* if the file offset address is in the header zone,
+ * there is a problem */
+ if (sinfo.file_offset < (1024 * 1024)) {
+ ret = -EFAULT;
+ goto error_bat_restore;
+ }
+
+ if (!use_zero_buffers) {
+ qemu_iovec_concat(&hd_qiov, qiov, bytes_done,
+ sinfo.bytes_avail);
+ }
+ /* block exists, so we can just overwrite it */
+ qemu_co_mutex_unlock(&s->lock);
+ ret = bdrv_co_writev(bs->file,
+ sinfo.file_offset >> BDRV_SECTOR_BITS,
+ sectors_to_write, &hd_qiov);
+ qemu_co_mutex_lock(&s->lock);
+ if (ret < 0) {
+ goto error_bat_restore;
+ }
+ break;
+ case PAYLOAD_BLOCK_PARTIALLY_PRESENT:
+ /* we don't yet support difference files, fall through
+ * to error */
+ default:
+ ret = -EIO;
+ goto exit;
+ break;
+ }
+
+ if (bat_update) {
+ /* this will update the BAT entry into the log journal, and
+ * then flush the log journal out to disk */
+ ret = vhdx_log_write_and_flush(bs, s, &bat_entry,
+ sizeof(VHDXBatEntry),
+ bat_entry_offset);
+ if (ret < 0) {
+ goto exit;
+ }
+ }
+
+ nb_sectors -= sinfo.sectors_avail;
+ sector_num += sinfo.sectors_avail;
+ bytes_done += sinfo.bytes_avail;
+
+ }
+ }
+
+ goto exit;
+
+error_bat_restore:
+ if (bat_update) {
+ /* keep metadata in sync, and restore the bat entry state
+ * if error. */
+ sinfo.file_offset = bat_prior_offset;
+ vhdx_update_bat_table_entry(bs, s, &sinfo, &bat_entry,
+ &bat_entry_offset, bat_state);
+ }
+exit:
+ qemu_vfree(iov1.iov_base);
+ qemu_vfree(iov2.iov_base);
+ qemu_co_mutex_unlock(&s->lock);
+ qemu_iovec_destroy(&hd_qiov);
+ return ret;
}
-static void vhdx_close(BlockDriverState *bs)
+
+/*
+ * Create VHDX Headers
+ *
+ * There are 2 headers, and the highest sequence number will represent
+ * the active header
+ */
+static int vhdx_create_new_headers(BlockDriverState *bs, uint64_t image_size,
+ uint32_t log_size)
+{
+ int ret = 0;
+ VHDXHeader *hdr = NULL;
+
+ hdr = g_new0(VHDXHeader, 1);
+
+ hdr->signature = VHDX_HEADER_SIGNATURE;
+ hdr->sequence_number = g_random_int();
+ hdr->log_version = 0;
+ hdr->version = 1;
+ hdr->log_length = log_size;
+ hdr->log_offset = VHDX_HEADER_SECTION_END;
+ vhdx_guid_generate(&hdr->file_write_guid);
+ vhdx_guid_generate(&hdr->data_write_guid);
+
+ ret = vhdx_write_header(bs, hdr, VHDX_HEADER1_OFFSET, false);
+ if (ret < 0) {
+ goto exit;
+ }
+ hdr->sequence_number++;
+ ret = vhdx_write_header(bs, hdr, VHDX_HEADER2_OFFSET, false);
+ if (ret < 0) {
+ goto exit;
+ }
+
+exit:
+ g_free(hdr);
+ return ret;
+}
+
+#define VHDX_METADATA_ENTRY_BUFFER_SIZE \
+ (sizeof(VHDXFileParameters) +\
+ sizeof(VHDXVirtualDiskSize) +\
+ sizeof(VHDXPage83Data) +\
+ sizeof(VHDXVirtualDiskLogicalSectorSize) +\
+ sizeof(VHDXVirtualDiskPhysicalSectorSize))
+
+/*
+ * Create the Metadata entries.
+ *
+ * For more details on the entries, see section 3.5 (pg 29) in the
+ * VHDX 1.00 specification.
+ *
+ * We support 5 metadata entries (all required by spec):
+ * File Parameters,
+ * Virtual Disk Size,
+ * Page 83 Data,
+ * Logical Sector Size,
+ * Physical Sector Size
+ *
+ * The first 64KB of the Metadata section is reserved for the metadata
+ * header and entries; beyond that, the metadata items themselves reside.
+ */
+static int vhdx_create_new_metadata(BlockDriverState *bs,
+ uint64_t image_size,
+ uint32_t block_size,
+ uint32_t sector_size,
+ uint64_t metadata_offset,
+ VHDXImageType type)
+{
+ int ret = 0;
+ uint32_t offset = 0;
+ void *buffer = NULL;
+ void *entry_buffer;
+ VHDXMetadataTableHeader *md_table;;
+ VHDXMetadataTableEntry *md_table_entry;
+
+ /* Metadata entries */
+ VHDXFileParameters *mt_file_params;
+ VHDXVirtualDiskSize *mt_virtual_size;
+ VHDXPage83Data *mt_page83;
+ VHDXVirtualDiskLogicalSectorSize *mt_log_sector_size;
+ VHDXVirtualDiskPhysicalSectorSize *mt_phys_sector_size;
+
+ entry_buffer = g_malloc0(VHDX_METADATA_ENTRY_BUFFER_SIZE);
+
+ mt_file_params = entry_buffer;
+ offset += sizeof(VHDXFileParameters);
+ mt_virtual_size = entry_buffer + offset;
+ offset += sizeof(VHDXVirtualDiskSize);
+ mt_page83 = entry_buffer + offset;
+ offset += sizeof(VHDXPage83Data);
+ mt_log_sector_size = entry_buffer + offset;
+ offset += sizeof(VHDXVirtualDiskLogicalSectorSize);
+ mt_phys_sector_size = entry_buffer + offset;
+
+ mt_file_params->block_size = cpu_to_le32(block_size);
+ if (type == VHDX_TYPE_FIXED) {
+ mt_file_params->data_bits |= VHDX_PARAMS_LEAVE_BLOCKS_ALLOCED;
+ cpu_to_le32s(&mt_file_params->data_bits);
+ }
+
+ vhdx_guid_generate(&mt_page83->page_83_data);
+ cpu_to_leguids(&mt_page83->page_83_data);
+ mt_virtual_size->virtual_disk_size = cpu_to_le64(image_size);
+ mt_log_sector_size->logical_sector_size = cpu_to_le32(sector_size);
+ mt_phys_sector_size->physical_sector_size = cpu_to_le32(sector_size);
+
+ buffer = g_malloc0(VHDX_HEADER_BLOCK_SIZE);
+ md_table = buffer;
+
+ md_table->signature = VHDX_METADATA_SIGNATURE;
+ md_table->entry_count = 5;
+ vhdx_metadata_header_le_export(md_table);
+
+
+ /* This will reference beyond the reserved table portion */
+ offset = 64 * KiB;
+
+ md_table_entry = buffer + sizeof(VHDXMetadataTableHeader);
+
+ md_table_entry[0].item_id = file_param_guid;
+ md_table_entry[0].offset = offset;
+ md_table_entry[0].length = sizeof(VHDXFileParameters);
+ md_table_entry[0].data_bits |= VHDX_META_FLAGS_IS_REQUIRED;
+ offset += md_table_entry[0].length;
+ vhdx_metadata_entry_le_export(&md_table_entry[0]);
+
+ md_table_entry[1].item_id = virtual_size_guid;
+ md_table_entry[1].offset = offset;
+ md_table_entry[1].length = sizeof(VHDXVirtualDiskSize);
+ md_table_entry[1].data_bits |= VHDX_META_FLAGS_IS_REQUIRED |
+ VHDX_META_FLAGS_IS_VIRTUAL_DISK;
+ offset += md_table_entry[1].length;
+ vhdx_metadata_entry_le_export(&md_table_entry[1]);
+
+ md_table_entry[2].item_id = page83_guid;
+ md_table_entry[2].offset = offset;
+ md_table_entry[2].length = sizeof(VHDXPage83Data);
+ md_table_entry[2].data_bits |= VHDX_META_FLAGS_IS_REQUIRED |
+ VHDX_META_FLAGS_IS_VIRTUAL_DISK;
+ offset += md_table_entry[2].length;
+ vhdx_metadata_entry_le_export(&md_table_entry[2]);
+
+ md_table_entry[3].item_id = logical_sector_guid;
+ md_table_entry[3].offset = offset;
+ md_table_entry[3].length = sizeof(VHDXVirtualDiskLogicalSectorSize);
+ md_table_entry[3].data_bits |= VHDX_META_FLAGS_IS_REQUIRED |
+ VHDX_META_FLAGS_IS_VIRTUAL_DISK;
+ offset += md_table_entry[3].length;
+ vhdx_metadata_entry_le_export(&md_table_entry[3]);
+
+ md_table_entry[4].item_id = phys_sector_guid;
+ md_table_entry[4].offset = offset;
+ md_table_entry[4].length = sizeof(VHDXVirtualDiskPhysicalSectorSize);
+ md_table_entry[4].data_bits |= VHDX_META_FLAGS_IS_REQUIRED |
+ VHDX_META_FLAGS_IS_VIRTUAL_DISK;
+ vhdx_metadata_entry_le_export(&md_table_entry[4]);
+
+ ret = bdrv_pwrite(bs, metadata_offset, buffer, VHDX_HEADER_BLOCK_SIZE);
+ if (ret < 0) {
+ goto exit;
+ }
+
+ ret = bdrv_pwrite(bs, metadata_offset + (64 * KiB), entry_buffer,
+ VHDX_METADATA_ENTRY_BUFFER_SIZE);
+ if (ret < 0) {
+ goto exit;
+ }
+
+
+exit:
+ g_free(buffer);
+ g_free(entry_buffer);
+ return ret;
+}
+
+/* This create the actual BAT itself. We currently only support
+ * 'Dynamic' and 'Fixed' image types.
+ *
+ * Dynamic images: default state of the BAT is all zeroes.
+ *
+ * Fixed images: default state of the BAT is fully populated, with
+ * file offsets and state PAYLOAD_BLOCK_FULLY_PRESENT.
+ */
+static int vhdx_create_bat(BlockDriverState *bs, BDRVVHDXState *s,
+ uint64_t image_size, VHDXImageType type,
+ bool use_zero_blocks, uint64_t file_offset,
+ uint32_t length)
+{
+ int ret = 0;
+ uint64_t data_file_offset;
+ uint64_t total_sectors = 0;
+ uint64_t sector_num = 0;
+ uint64_t unused;
+ int block_state;
+ VHDXSectorInfo sinfo;
+
+ assert(s->bat == NULL);
+
+ /* this gives a data start after BAT/bitmap entries, and well
+ * past any metadata entries (with a 4 MB buffer for future
+ * expansion */
+ data_file_offset = file_offset + length + 5 * MiB;
+ total_sectors = image_size >> s->logical_sector_size_bits;
+
+ if (type == VHDX_TYPE_DYNAMIC) {
+ /* All zeroes, so we can just extend the file - the end of the BAT
+ * is the furthest thing we have written yet */
+ ret = bdrv_truncate(bs, data_file_offset);
+ if (ret < 0) {
+ goto exit;
+ }
+ } else if (type == VHDX_TYPE_FIXED) {
+ ret = bdrv_truncate(bs, data_file_offset + image_size);
+ if (ret < 0) {
+ goto exit;
+ }
+ } else {
+ ret = -ENOTSUP;
+ goto exit;
+ }
+
+ if (type == VHDX_TYPE_FIXED ||
+ use_zero_blocks ||
+ bdrv_has_zero_init(bs) == 0) {
+ /* for a fixed file, the default BAT entry is not zero */
+ s->bat = g_try_malloc0(length);
+ if (length && s->bat == NULL) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+ block_state = type == VHDX_TYPE_FIXED ? PAYLOAD_BLOCK_FULLY_PRESENT :
+ PAYLOAD_BLOCK_NOT_PRESENT;
+ block_state = use_zero_blocks ? PAYLOAD_BLOCK_ZERO : block_state;
+ /* fill the BAT by emulating sector writes of sectors_per_block size */
+ while (sector_num < total_sectors) {
+ vhdx_block_translate(s, sector_num, s->sectors_per_block, &sinfo);
+ sinfo.file_offset = data_file_offset +
+ (sector_num << s->logical_sector_size_bits);
+ sinfo.file_offset = ROUND_UP(sinfo.file_offset, MiB);
+ vhdx_update_bat_table_entry(bs, s, &sinfo, &unused, &unused,
+ block_state);
+ cpu_to_le64s(&s->bat[sinfo.bat_idx]);
+ sector_num += s->sectors_per_block;
+ }
+ ret = bdrv_pwrite(bs, file_offset, s->bat, length);
+ if (ret < 0) {
+ goto exit;
+ }
+ }
+
+
+
+exit:
+ g_free(s->bat);
+ return ret;
+}
+
+/* Creates the region table header, and region table entries.
+ * There are 2 supported region table entries: BAT, and Metadata/
+ *
+ * As the calculations for the BAT region table are also needed
+ * to create the BAT itself, we will also cause the BAT to be
+ * created.
+ */
+static int vhdx_create_new_region_table(BlockDriverState *bs,
+ uint64_t image_size,
+ uint32_t block_size,
+ uint32_t sector_size,
+ uint32_t log_size,
+ bool use_zero_blocks,
+ VHDXImageType type,
+ uint64_t *metadata_offset)
+{
+ int ret = 0;
+ uint32_t offset = 0;
+ void *buffer = NULL;
+ uint64_t bat_file_offset;
+ uint32_t bat_length;
+ BDRVVHDXState *s = NULL;
+ VHDXRegionTableHeader *region_table;
+ VHDXRegionTableEntry *rt_bat;
+ VHDXRegionTableEntry *rt_metadata;
+
+ assert(metadata_offset != NULL);
+
+ /* Populate enough of the BDRVVHDXState to be able to use the
+ * pre-existing BAT calculation, translation, and update functions */
+ s = g_new0(BDRVVHDXState, 1);
+
+ s->chunk_ratio = (VHDX_MAX_SECTORS_PER_BLOCK) *
+ (uint64_t) sector_size / (uint64_t) block_size;
+
+ s->sectors_per_block = block_size / sector_size;
+ s->virtual_disk_size = image_size;
+ s->block_size = block_size;
+ s->logical_sector_size = sector_size;
+
+ vhdx_set_shift_bits(s);
+
+ vhdx_calc_bat_entries(s);
+
+ /* At this point the VHDX state is populated enough for creation */
+
+ /* a single buffer is used so we can calculate the checksum over the
+ * entire 64KB block */
+ buffer = g_malloc0(VHDX_HEADER_BLOCK_SIZE);
+ region_table = buffer;
+ offset += sizeof(VHDXRegionTableHeader);
+ rt_bat = buffer + offset;
+ offset += sizeof(VHDXRegionTableEntry);
+ rt_metadata = buffer + offset;
+
+ region_table->signature = VHDX_REGION_SIGNATURE;
+ region_table->entry_count = 2; /* BAT and Metadata */
+
+ rt_bat->guid = bat_guid;
+ rt_bat->length = ROUND_UP(s->bat_entries * sizeof(VHDXBatEntry), MiB);
+ rt_bat->file_offset = ROUND_UP(VHDX_HEADER_SECTION_END + log_size, MiB);
+ s->bat_offset = rt_bat->file_offset;
+
+ rt_metadata->guid = metadata_guid;
+ rt_metadata->file_offset = ROUND_UP(rt_bat->file_offset + rt_bat->length,
+ MiB);
+ rt_metadata->length = 1 * MiB; /* min size, and more than enough */
+ *metadata_offset = rt_metadata->file_offset;
+
+ bat_file_offset = rt_bat->file_offset;
+ bat_length = rt_bat->length;
+
+ vhdx_region_header_le_export(region_table);
+ vhdx_region_entry_le_export(rt_bat);
+ vhdx_region_entry_le_export(rt_metadata);
+
+ vhdx_update_checksum(buffer, VHDX_HEADER_BLOCK_SIZE,
+ offsetof(VHDXRegionTableHeader, checksum));
+
+
+ /* The region table gives us the data we need to create the BAT,
+ * so do that now */
+ ret = vhdx_create_bat(bs, s, image_size, type, use_zero_blocks,
+ bat_file_offset, bat_length);
+ if (ret < 0) {
+ goto exit;
+ }
+
+ /* Now write out the region headers to disk */
+ ret = bdrv_pwrite(bs, VHDX_REGION_TABLE_OFFSET, buffer,
+ VHDX_HEADER_BLOCK_SIZE);
+ if (ret < 0) {
+ goto exit;
+ }
+
+ ret = bdrv_pwrite(bs, VHDX_REGION_TABLE2_OFFSET, buffer,
+ VHDX_HEADER_BLOCK_SIZE);
+ if (ret < 0) {
+ goto exit;
+ }
+
+exit:
+ g_free(s);
+ g_free(buffer);
+ return ret;
+}
+
+/* We need to create the following elements:
+ *
+ * .-----------------------------------------------------------------.
+ * | (A) | (B) | (C) | (D) | (E) |
+ * | File ID | Header1 | Header 2 | Region Tbl 1 | Region Tbl 2 |
+ * | | | | | |
+ * .-----------------------------------------------------------------.
+ * 0 64KB 128KB 192KB 256KB 320KB
+ *
+ *
+ * .---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
+ * | (F) | (G) | (H) | |
+ * | Journal Log | BAT / Bitmap | Metadata | .... data ...... |
+ * | | | | |
+ * .---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
+ * 1MB
+ */
+static int vhdx_create(const char *filename, QemuOpts *opts, Error **errp)
+{
+ int ret = 0;
+ uint64_t image_size = (uint64_t) 2 * GiB;
+ uint32_t log_size = 1 * MiB;
+ uint32_t block_size = 0;
+ uint64_t signature;
+ uint64_t metadata_offset;
+ bool use_zero_blocks = false;
+
+ gunichar2 *creator = NULL;
+ glong creator_items;
+ BlockDriverState *bs;
+ char *type = NULL;
+ VHDXImageType image_type;
+ Error *local_err = NULL;
+
+ image_size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
+ BDRV_SECTOR_SIZE);
+ log_size = qemu_opt_get_size_del(opts, VHDX_BLOCK_OPT_LOG_SIZE, 0);
+ block_size = qemu_opt_get_size_del(opts, VHDX_BLOCK_OPT_BLOCK_SIZE, 0);
+ type = qemu_opt_get_del(opts, BLOCK_OPT_SUBFMT);
+ use_zero_blocks = qemu_opt_get_bool_del(opts, VHDX_BLOCK_OPT_ZERO, true);
+
+ if (image_size > VHDX_MAX_IMAGE_SIZE) {
+ error_setg_errno(errp, EINVAL, "Image size too large; max of 64TB");
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ if (type == NULL) {
+ type = g_strdup("dynamic");
+ }
+
+ if (!strcmp(type, "dynamic")) {
+ image_type = VHDX_TYPE_DYNAMIC;
+ } else if (!strcmp(type, "fixed")) {
+ image_type = VHDX_TYPE_FIXED;
+ } else if (!strcmp(type, "differencing")) {
+ error_setg_errno(errp, ENOTSUP,
+ "Differencing files not yet supported");
+ ret = -ENOTSUP;
+ goto exit;
+ } else {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* These are pretty arbitrary, and mainly designed to keep the BAT
+ * size reasonable to load into RAM */
+ if (block_size == 0) {
+ if (image_size > 32 * TiB) {
+ block_size = 64 * MiB;
+ } else if (image_size > (uint64_t) 100 * GiB) {
+ block_size = 32 * MiB;
+ } else if (image_size > 1 * GiB) {
+ block_size = 16 * MiB;
+ } else {
+ block_size = 8 * MiB;
+ }
+ }
+
+
+ /* make the log size close to what was specified, but must be
+ * min 1MB, and multiple of 1MB */
+ log_size = ROUND_UP(log_size, MiB);
+
+ block_size = ROUND_UP(block_size, MiB);
+ block_size = block_size > VHDX_BLOCK_SIZE_MAX ? VHDX_BLOCK_SIZE_MAX :
+ block_size;
+
+ ret = bdrv_create_file(filename, opts, &local_err);
+ if (ret < 0) {
+ error_propagate(errp, local_err);
+ goto exit;
+ }
+
+ bs = NULL;
+ ret = bdrv_open(&bs, filename, NULL, NULL, BDRV_O_RDWR | BDRV_O_PROTOCOL,
+ NULL, &local_err);
+ if (ret < 0) {
+ error_propagate(errp, local_err);
+ goto exit;
+ }
+
+ /* Create (A) */
+
+ /* The creator field is optional, but may be useful for
+ * debugging / diagnostics */
+ creator = g_utf8_to_utf16("QEMU v" QEMU_VERSION, -1, NULL,
+ &creator_items, NULL);
+ signature = cpu_to_le64(VHDX_FILE_SIGNATURE);
+ ret = bdrv_pwrite(bs, VHDX_FILE_ID_OFFSET, &signature, sizeof(signature));
+ if (ret < 0) {
+ goto delete_and_exit;
+ }
+ if (creator) {
+ ret = bdrv_pwrite(bs, VHDX_FILE_ID_OFFSET + sizeof(signature),
+ creator, creator_items * sizeof(gunichar2));
+ if (ret < 0) {
+ goto delete_and_exit;
+ }
+ }
+
+
+ /* Creates (B),(C) */
+ ret = vhdx_create_new_headers(bs, image_size, log_size);
+ if (ret < 0) {
+ goto delete_and_exit;
+ }
+
+ /* Creates (D),(E),(G) explicitly. (F) created as by-product */
+ ret = vhdx_create_new_region_table(bs, image_size, block_size, 512,
+ log_size, use_zero_blocks, image_type,
+ &metadata_offset);
+ if (ret < 0) {
+ goto delete_and_exit;
+ }
+
+ /* Creates (H) */
+ ret = vhdx_create_new_metadata(bs, image_size, block_size, 512,
+ metadata_offset, image_type);
+ if (ret < 0) {
+ goto delete_and_exit;
+ }
+
+
+delete_and_exit:
+ bdrv_unref(bs);
+exit:
+ g_free(type);
+ g_free(creator);
+ return ret;
+}
+
+/* If opened r/w, the VHDX driver will automatically replay the log,
+ * if one is present, inside the vhdx_open() call.
+ *
+ * If qemu-img check -r all is called, the image is automatically opened
+ * r/w and any log has already been replayed, so there is nothing (currently)
+ * for us to do here
+ */
+static int vhdx_check(BlockDriverState *bs, BdrvCheckResult *result,
+ BdrvCheckMode fix)
{
BDRVVHDXState *s = bs->opaque;
- qemu_vfree(s->headers[0]);
- qemu_vfree(s->headers[1]);
- qemu_vfree(s->bat);
- qemu_vfree(s->parent_entries);
+
+ if (s->log_replayed_on_open) {
+ result->corruptions_fixed++;
+ }
+ return 0;
}
+static QemuOptsList vhdx_create_opts = {
+ .name = "vhdx-create-opts",
+ .head = QTAILQ_HEAD_INITIALIZER(vhdx_create_opts.head),
+ .desc = {
+ {
+ .name = BLOCK_OPT_SIZE,
+ .type = QEMU_OPT_SIZE,
+ .help = "Virtual disk size; max of 64TB."
+ },
+ {
+ .name = VHDX_BLOCK_OPT_LOG_SIZE,
+ .type = QEMU_OPT_SIZE,
+ .def_value_str = stringify(DEFAULT_LOG_SIZE),
+ .help = "Log size; min 1MB."
+ },
+ {
+ .name = VHDX_BLOCK_OPT_BLOCK_SIZE,
+ .type = QEMU_OPT_SIZE,
+ .def_value_str = stringify(0),
+ .help = "Block Size; min 1MB, max 256MB. " \
+ "0 means auto-calculate based on image size."
+ },
+ {
+ .name = BLOCK_OPT_SUBFMT,
+ .type = QEMU_OPT_STRING,
+ .help = "VHDX format type, can be either 'dynamic' or 'fixed'. "\
+ "Default is 'dynamic'."
+ },
+ {
+ .name = VHDX_BLOCK_OPT_ZERO,
+ .type = QEMU_OPT_BOOL,
+ .help = "Force use of payload blocks of type 'ZERO'. "\
+ "Non-standard, but default. Do not set to 'off' when "\
+ "using 'qemu-img convert' with subformat=dynamic."
+ },
+ { NULL }
+ }
+};
+
static BlockDriver bdrv_vhdx = {
.format_name = "vhdx",
.instance_size = sizeof(BDRVVHDXState),
.bdrv_reopen_prepare = vhdx_reopen_prepare,
.bdrv_co_readv = vhdx_co_readv,
.bdrv_co_writev = vhdx_co_writev,
+ .bdrv_create = vhdx_create,
+ .bdrv_get_info = vhdx_get_info,
+ .bdrv_check = vhdx_check,
+ .bdrv_has_zero_init = bdrv_has_zero_init_1,
+
+ .create_opts = &vhdx_create_opts,
};
static void bdrv_vhdx_init(void)
projects / qemu.git / blobdiff