# @KVMMissingCap: the requested operation can't be fulfilled because a
# required KVM capability is missing
#
-# @MigrationExpected: the requested operation can't be fulfilled because a
-# migration process is expected
-#
# Since: 1.2
##
{ 'enum': 'ErrorClass',
'data': [ 'GenericError', 'CommandNotFound', 'DeviceEncrypted',
- 'DeviceNotActive', 'DeviceNotFound', 'KVMMissingCap',
- 'MigrationExpected' ] }
+ 'DeviceNotActive', 'DeviceNotFound', 'KVMMissingCap' ] }
##
# @add_client
#
# @finish-migrate: guest is paused to finish the migration process
#
-# @inmigrate: guest is paused waiting for an incoming migration
+# @inmigrate: guest is paused waiting for an incoming migration. Note
+# that this state does not tell whether the machine will start at the
+# end of the migration. This depends on the command-line -S option and
+# any invocation of 'stop' or 'cont' that has happened since QEMU was
+# started.
#
# @internal-error: An internal error that prevents further guest execution
# has occurred
#
# @normal : number of normal pages (since 1.2)
#
-# @normal-bytes : number of normal bytes sent (since 1.2)
+# @normal-bytes: number of normal bytes sent (since 1.2)
+#
+# @dirty-pages-rate: number of pages dirtied by second by the
+# guest (since 1.3)
#
# Since: 0.14.0
##
{ 'type': 'MigrationStats',
'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
- 'duplicate': 'int', 'normal': 'int', 'normal-bytes': 'int' } }
+ 'duplicate': 'int', 'normal': 'int', 'normal-bytes': 'int',
+ 'dirty-pages-rate' : 'int' } }
##
# @XBZRLECacheStats
# If migration has ended, it returns the total migration
# time. (since 1.2)
#
+# @downtime: #optional only present when migration finishes correctly
+# total downtime in milliseconds for the guest.
+# (since 1.3)
+#
+# @expected-downtime: #optional only present while migration is active
+# expected downtime in milliseconds for the guest in last walk
+# of the dirty bitmap. (since 1.3)
+#
# Since: 0.14.0
##
{ 'type': 'MigrationInfo',
'data': {'*status': 'str', '*ram': 'MigrationStats',
'*disk': 'MigrationStats',
'*xbzrle-cache': 'XBZRLECacheStats',
- '*total-time': 'int'} }
+ '*total-time': 'int',
+ '*expected-downtime': 'int',
+ '*downtime': 'int'} }
##
# @query-migrate
##
{ 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] }
+##
+# @BlockDirtyInfo:
+#
+# Block dirty bitmap information.
+#
+# @count: number of dirty bytes according to the dirty bitmap
+#
+# Since: 1.3
+##
+{ 'type': 'BlockDirtyInfo',
+ 'data': {'count': 'int'} }
+
##
# @BlockInfo:
#
# @tray_open: #optional True if the device has a tray and it is open
# (only present if removable is true)
#
+# @dirty: #optional dirty bitmap information (only present if the dirty
+# bitmap is enabled)
+#
# @io-status: #optional @BlockDeviceIoStatus. Only present if the device
# supports it and the VM is configured to stop on errors
#
{ 'type': 'BlockInfo',
'data': {'device': 'str', 'type': 'str', 'removable': 'bool',
'locked': 'bool', '*inserted': 'BlockDeviceInfo',
- '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus'} }
+ '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus',
+ '*dirty': 'BlockDirtyInfo' } }
##
# @query-block:
{ 'enum': 'BlockdevOnError',
'data': ['report', 'ignore', 'enospc', 'stop'] }
+##
+# @MirrorSyncMode:
+#
+# An enumeration of possible behaviors for the initial synchronization
+# phase of storage mirroring.
+#
+# @top: copies data in the topmost image to the destination
+#
+# @full: copies data from all images to the destination
+#
+# @none: only copy data written from now on
+#
+# Since: 1.3
+##
+{ 'enum': 'MirrorSyncMode',
+ 'data': ['top', 'full', 'none'] }
+
##
# @BlockJobInfo:
#
# Since: 0.14.0
#
# Notes: This function will succeed even if the guest is already in the stopped
-# state
+# state. In "inmigrate" state, it will ensure that the guest
+# remains paused once migration finishes, as if the -S option was
+# passed on the command line.
##
{ 'command': 'stop' }
# Since: 0.14.0
#
# Returns: If successful, nothing
-# If the QEMU is waiting for an incoming migration, MigrationExpected
# If QEMU was started with an encrypted block device and a key has
# not yet been set, DeviceEncrypted.
#
-# Notes: This command will succeed if the guest is currently running.
+# Notes: This command will succeed if the guest is currently running. It
+# will also succeed if the guest is in the "inmigrate" state; in
+# this case, the effect of the command is to make sure the guest
+# starts once migration finishes, removing the effect of the -S
+# command line option if it was passed.
##
{ 'command': 'cont' }
'data': { 'device': 'str', '*base': 'str', 'top': 'str',
'*speed': 'int' } }
+##
+# @drive-mirror
+#
+# Start mirroring a block device's writes to a new destination.
+#
+# @device: the name of the device whose writes should be mirrored.
+#
+# @target: the target of the new image. If the file exists, or if it
+# is a device, the existing file/device will be used as the new
+# destination. If it does not exist, a new file will be created.
+#
+# @format: #optional the format of the new destination, default is to
+# probe if @mode is 'existing', else the format of the source
+#
+# @mode: #optional whether and how QEMU should create a new image, default is
+# 'absolute-paths'.
+#
+# @speed: #optional the maximum speed, in bytes per second
+#
+# @sync: what parts of the disk image should be copied to the destination
+# (all the disk, only the sectors allocated in the topmost image, or
+# only new I/O).
+#
+# @on-source-error: #optional the action to take on an error on the source,
+# default 'report'. 'stop' and 'enospc' can only be used
+# if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+# default 'report' (no limitations, since this applies to
+# a different block device than @device).
+#
+# Returns: nothing on success
+# If @device is not a valid block device, DeviceNotFound
+#
+# Since 1.3
+##
+{ 'command': 'drive-mirror',
+ 'data': { 'device': 'str', 'target': 'str', '*format': 'str',
+ 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
+ '*speed': 'int', '*on-source-error': 'BlockdevOnError',
+ '*on-target-error': 'BlockdevOnError' } }
+
+##
# @migrate_cancel
#
# Cancel the current executing migration process.
##
{ 'command': 'block-job-resume', 'data': { 'device': 'str' } }
+##
+# @block-job-complete:
+#
+# Manually trigger completion of an active background block operation. This
+# is supported for drive mirroring, where it also switches the device to
+# write to the target path only. The ability to complete is signaled with
+# a BLOCK_JOB_READY event.
+#
+# This command completes an active background block operation synchronously.
+# The ordering of this command's return with the BLOCK_JOB_COMPLETED event
+# is not defined. Note that if an I/O error occurs during the processing of
+# this command: 1) the command itself will fail; 2) the error will be processed
+# according to the rerror/werror arguments that were specified when starting
+# the operation.
+#
+# A cancelled or paused job cannot be completed.
+#
+# @device: the device name
+#
+# Returns: Nothing on success
+# If no background operation is active on this device, DeviceNotActive
+#
+# Since: 1.3
+##
+{ 'command': 'block-job-complete', 'data': { 'device': 'str' } }
+
##
# @ObjectTypeInfo:
#
#
# @dns: #optional guest-visible address of the virtual nameserver
#
+# @dnssearch: #optional list of DNS suffixes to search, passed as DHCP option
+# to the guest
+#
# @smb: #optional root directory of the built-in SMB server
#
# @smbserver: #optional IP address of the built-in SMB server
'*bootfile': 'str',
'*dhcpstart': 'str',
'*dns': 'str',
+ '*dnssearch': ['String'],
'*smb': 'str',
'*smbserver': 'str',
'*hostfwd': ['String'],
'id': 'str',
'opts': 'NetClientOptions' } }
+##
+# @InetSocketAddress
+#
+# Captures a socket address or address range in the Internet namespace.
+#
+# @host: host part of the address
+#
+# @port: port part of the address, or lowest port if @to is present
+#
+# @to: highest port to try
+#
+# @ipv4: whether to accept IPv4 addresses, default try both IPv4 and IPv6
+# #optional
+#
+# @ipv6: whether to accept IPv6 addresses, default try both IPv4 and IPv6
+# #optional
+#
+# Since 1.3
+##
+{ 'type': 'InetSocketAddress',
+ 'data': {
+ 'host': 'str',
+ 'port': 'str',
+ '*to': 'uint16',
+ '*ipv4': 'bool',
+ '*ipv6': 'bool' } }
+
+##
+# @UnixSocketAddress
+#
+# Captures a socket address in the local ("Unix socket") namespace.
+#
+# @path: filesystem path to use
+#
+# Since 1.3
+##
+{ 'type': 'UnixSocketAddress',
+ 'data': {
+ 'path': 'str' } }
+
+##
+# @SocketAddress
+#
+# Captures the address of a socket, which could also be a named file descriptor
+#
+# Since 1.3
+##
+{ 'union': 'SocketAddress',
+ 'data': {
+ 'inet': 'InetSocketAddress',
+ 'unix': 'UnixSocketAddress',
+ 'fd': 'String' } }
+
##
# @getfd:
#
#
# Returns: @AddfdInfo on success
# If file descriptor was not received, FdNotSupplied
-# If @fdset-id does not exist, InvalidParameterValue
+# If @fdset-id is a negative value, InvalidParameterValue
#
# Notes: The list of fd sets is shared by all monitor connections.
#
# Since: 0.14.0
##
{ 'command': 'screendump', 'data': {'filename': 'str'} }
+
+##
+# @nbd-server-start:
+#
+# Start an NBD server listening on the given host and port. Block
+# devices can then be exported using @nbd-server-add. The NBD
+# server will present them as named exports; for example, another
+# QEMU instance could refer to them as "nbd:HOST:PORT:exportname=NAME".
+#
+# @addr: Address on which to listen.
+#
+# Returns: error if the server is already running.
+#
+# Since: 1.3.0
+##
+{ 'command': 'nbd-server-start',
+ 'data': { 'addr': 'SocketAddress' } }
+
+##
+# @nbd-server-add:
+#
+# Export a device to QEMU's embedded NBD server.
+#
+# @device: Block device to be exported
+#
+# @writable: Whether clients should be able to write to the device via the
+# NBD connection (default false). #optional
+#
+# Returns: error if the device is already marked for export.
+#
+# Since: 1.3.0
+##
+{ 'command': 'nbd-server-add', 'data': {'device': 'str', '*writable': 'bool'} }
+
+##
+# @nbd-server-stop:
+#
+# Stop QEMU's embedded NBD server, and unregister all devices previously
+# added via @nbd-server-add.
+#
+# Since: 1.3.0
+##
+{ 'command': 'nbd-server-stop' }
projects / qemu.git / blobdiff