DEF("drive", HAS_ARG, QEMU_OPTION_drive,
"-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
" [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
- " [,cache=writethrough|writeback|unsafe|none][,format=f]\n"
+ " [,cache=writethrough|writeback|none|unsafe][,format=f]\n"
" [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
" [,readonly=on|off]\n"
" use 'file' as a drive image\n", QEMU_ARCH_ALL)
qemu -soundhw sb16,adlib disk.img
qemu -soundhw es1370 disk.img
qemu -soundhw ac97 disk.img
+qemu -soundhw hda disk.img
qemu -soundhw all disk.img
qemu -soundhw ?
@end example
@code{-device @var{driver},?}.
ETEXI
-#ifdef CONFIG_LINUX
DEFHEADING(File system options:)
DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev,
- "-fsdev local,id=id,path=path,security_model=[mapped|passthrough]\n",
+ "-fsdev local,id=id,path=path,security_model=[mapped|passthrough|none]\n",
QEMU_ARCH_ALL)
STEXI
@end table
ETEXI
-#endif
-#ifdef CONFIG_LINUX
DEFHEADING(Virtual File system pass-through options:)
DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs,
- "-virtfs local,path=path,mount_tag=tag,security_model=[mapped|passthrough]\n",
+ "-virtfs local,path=path,mount_tag=tag,security_model=[mapped|passthrough|none]\n",
QEMU_ARCH_ALL)
STEXI
@end table
ETEXI
-#endif
DEFHEADING()
Enable SDL.
ETEXI
+DEF("spice", HAS_ARG, QEMU_OPTION_spice,
+ "-spice <args> enable spice\n", QEMU_ARCH_ALL)
+STEXI
+@item -spice @var{option}[,@var{option}[,...]]
+@findex -spice
+Enable the spice remote desktop protocol. Valid options are
+
+@table @option
+
+@item port=<nr>
+Set the TCP port spice is listening on for plaintext channels.
+
+@item addr=<addr>
+Set the IP address spice is listening on. Default is any address.
+
+@item ipv4
+@item ipv6
+Force using the specified IP version.
+
+@item password=<secret>
+Set the password you need to authenticate.
+
+@item disable-ticketing
+Allow client connects without authentication.
+
+@item tls-port=<nr>
+Set the TCP port spice is listening on for encrypted channels.
+
+@item x509-dir=<dir>
+Set the x509 file directory. Expects same filenames as -vnc $display,x509=$dir
+
+@item x509-key-file=<file>
+@item x509-key-password=<file>
+@item x509-cert-file=<file>
+@item x509-cacert-file=<file>
+@item x509-dh-key-file=<file>
+The x509 file names can also be configured individually.
+
+@item tls-ciphers=<list>
+Specify which ciphers to use.
+
+@item tls-channel=[main|display|inputs|record|playback|tunnel]
+@item plaintext-channel=[main|display|inputs|record|playback|tunnel]
+Force specific channel to be used with or without TLS encryption. The
+options can be specified multiple times to configure multiple
+channels. The special name "default" can be used to set the default
+mode. For channels which are not explicitly forced into one mode the
+spice client is allowed to pick tls/plaintext as he pleases.
+
+@item image-compression=[auto_glz|auto_lz|quic|glz|lz|off]
+Configure image compression (lossless).
+Default is auto_glz.
+
+@item jpeg-wan-compression=[auto|never|always]
+@item zlib-glz-wan-compression=[auto|never|always]
+Configure wan image compression (lossy for slow links).
+Default is auto.
+
+@item streaming-video=[off|all|filter]
+Configure video stream detection. Default is filter.
+
+@item agent-mouse=[on|off]
+Enable/disable passing mouse events via vdagent. Default is on.
+
+@item playback-compression=[on|off]
+Enable/disable audio stream compression (using celt 0.5.1). Default is on.
+
+@end table
+ETEXI
+
DEF("portrait", 0, QEMU_OPTION_portrait,
"-portrait rotate graphical output 90 deg left (only PXA LCD)\n",
QEMU_ARCH_ALL)
use the VNC server until the ACLs have been loaded. This can be
achieved using the @code{acl} monitor command.
+@item lossy
+
+Enable lossy compression methods (gradient, JPEG, ...). If this
+option is set, VNC client may receive lossy framebuffer updates
+depending on its encoding settings. Enabling this option can save
+a lot of bandwidth at the expense of quality.
+
@end table
ETEXI
"-chardev serial,id=id,path=path[,mux=on|off]\n"
#else
"-chardev pty,id=id[,mux=on|off]\n"
- "-chardev stdio,id=id[,mux=on|off]\n"
+ "-chardev stdio,id=id[,mux=on|off][,signal=on|off]\n"
#endif
#ifdef CONFIG_BRLAPI
"-chardev braille,id=id[,mux=on|off]\n"
@option{pty} is not available on Windows hosts.
-@item -chardev stdio ,id=@var{id}
+@item -chardev stdio ,id=@var{id} [,signal=on|off]
Connect to standard input and standard output of the qemu process.
-@option{stdio} does not take any options. @option{stdio} is not available on
-Windows hosts.
+
+@option{signal} controls if signals are enabled on the terminal, that includes
+exiting QEMU with the key sequence @key{Control-c}. This option is enabled by
+default, use @option{signal=off} to disable it.
+
+@option{stdio} is not available on Windows hosts.
@item -chardev braille ,id=@var{id}
@var{sysconfdir}/target-@var{ARCH}.conf on startup. The @code{-nodefconfig}
option will prevent QEMU from loading these configuration files at startup.
ETEXI
+#ifdef CONFIG_SIMPLE_TRACE
+DEF("trace", HAS_ARG, QEMU_OPTION_trace,
+ "-trace\n"
+ " Specify a trace file to log traces to\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -trace
+@findex -trace
+Specify a trace file to log output traces to.
+ETEXI
+#endif
HXCOMM This is the last statement. Insert new options before this line!
STEXI
projects / qemu.git / blobdiff