#define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
+typedef enum {
+ BDRV_REQ_COPY_ON_READ = 0x1,
+ BDRV_REQ_ZERO_WRITE = 0x2,
+} BdrvRequestFlags;
+
static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
int64_t sector_num, int nb_sectors,
QEMUIOVector *iov);
static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, QEMUIOVector *qiov);
+ int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
+ BdrvRequestFlags flags);
static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, QEMUIOVector *qiov);
+ int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
+ BdrvRequestFlags flags);
static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
int64_t sector_num,
QEMUIOVector *qiov,
void *opaque,
bool is_write);
static void coroutine_fn bdrv_co_do_rw(void *opaque);
+static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors);
static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
bool is_write, double elapsed_time, uint64_t *wait);
return 0;
}
+/**
+ * The copy-on-read flag is actually a reference count so multiple users may
+ * use the feature without worrying about clobbering its previous state.
+ * Copy-on-read stays enabled until all users have called to disable it.
+ */
+void bdrv_enable_copy_on_read(BlockDriverState *bs)
+{
+ bs->copy_on_read++;
+}
+
+void bdrv_disable_copy_on_read(BlockDriverState *bs)
+{
+ assert(bs->copy_on_read > 0);
+ bs->copy_on_read--;
+}
+
/*
* Common part for opening disk images and files
*/
bs->growable = 0;
bs->buffer_alignment = 512;
+ assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
+ if ((flags & BDRV_O_RDWR) && (flags & BDRV_O_COPY_ON_READ)) {
+ bdrv_enable_copy_on_read(bs);
+ }
+
pstrcpy(bs->filename, sizeof(bs->filename), filename);
bs->backing_file[0] = '\0';
void bdrv_close(BlockDriverState *bs)
{
+ bdrv_flush(bs);
if (bs->drv) {
+ if (bs->job) {
+ block_job_cancel_sync(bs->job);
+ }
+ bdrv_drain_all();
+
if (bs == bs_snapshots) {
bs_snapshots = NULL;
}
#endif
bs->opaque = NULL;
bs->drv = NULL;
+ bs->copy_on_read = 0;
if (bs->file != NULL) {
bdrv_close(bs->file);
}
}
+/*
+ * Wait for pending requests to complete across all BlockDriverStates
+ *
+ * This function does not flush data to disk, use bdrv_flush_all() for that
+ * after calling this function.
+ */
+void bdrv_drain_all(void)
+{
+ BlockDriverState *bs;
+
+ qemu_aio_flush();
+
+ /* If requests are still pending there is a bug somewhere */
+ QTAILQ_FOREACH(bs, &bdrv_states, list) {
+ assert(QLIST_EMPTY(&bs->tracked_requests));
+ assert(qemu_co_queue_empty(&bs->throttled_reqs));
+ }
+}
+
/* make a BlockDriverState anonymous by removing from bdrv_state list.
Also, NULL terminate the device_name to prevent double remove */
void bdrv_make_anon(BlockDriverState *bs)
bs->device_name[0] = '\0';
}
+/*
+ * Add new bs contents at the top of an image chain while the chain is
+ * live, while keeping required fields on the top layer.
+ *
+ * This will modify the BlockDriverState fields, and swap contents
+ * between bs_new and bs_top. Both bs_new and bs_top are modified.
+ *
+ * bs_new is required to be anonymous.
+ *
+ * This function does not create any image files.
+ */
+void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
+{
+ BlockDriverState tmp;
+
+ /* bs_new must be anonymous */
+ assert(bs_new->device_name[0] == '\0');
+
+ tmp = *bs_new;
+
+ /* there are some fields that need to stay on the top layer: */
+
+ /* dev info */
+ tmp.dev_ops = bs_top->dev_ops;
+ tmp.dev_opaque = bs_top->dev_opaque;
+ tmp.dev = bs_top->dev;
+ tmp.buffer_alignment = bs_top->buffer_alignment;
+ tmp.copy_on_read = bs_top->copy_on_read;
+
+ /* i/o timing parameters */
+ tmp.slice_time = bs_top->slice_time;
+ tmp.slice_start = bs_top->slice_start;
+ tmp.slice_end = bs_top->slice_end;
+ tmp.io_limits = bs_top->io_limits;
+ tmp.io_base = bs_top->io_base;
+ tmp.throttled_reqs = bs_top->throttled_reqs;
+ tmp.block_timer = bs_top->block_timer;
+ tmp.io_limits_enabled = bs_top->io_limits_enabled;
+
+ /* geometry */
+ tmp.cyls = bs_top->cyls;
+ tmp.heads = bs_top->heads;
+ tmp.secs = bs_top->secs;
+ tmp.translation = bs_top->translation;
+
+ /* r/w error */
+ tmp.on_read_error = bs_top->on_read_error;
+ tmp.on_write_error = bs_top->on_write_error;
+
+ /* i/o status */
+ tmp.iostatus_enabled = bs_top->iostatus_enabled;
+ tmp.iostatus = bs_top->iostatus;
+
+ /* keep the same entry in bdrv_states */
+ pstrcpy(tmp.device_name, sizeof(tmp.device_name), bs_top->device_name);
+ tmp.list = bs_top->list;
+
+ /* The contents of 'tmp' will become bs_top, as we are
+ * swapping bs_new and bs_top contents. */
+ tmp.backing_hd = bs_new;
+ pstrcpy(tmp.backing_file, sizeof(tmp.backing_file), bs_top->filename);
+ bdrv_get_format(bs_top, tmp.backing_format, sizeof(tmp.backing_format));
+
+ /* swap contents of the fixed new bs and the current top */
+ *bs_new = *bs_top;
+ *bs_top = tmp;
+
+ /* device_name[] was carried over from the old bs_top. bs_new
+ * shouldn't be in bdrv_states, so we need to make device_name[]
+ * reflect the anonymity of bs_new
+ */
+ bs_new->device_name[0] = '\0';
+
+ /* clear the copied fields in the new backing file */
+ bdrv_detach_dev(bs_new, bs_new->dev);
+
+ qemu_co_queue_init(&bs_new->throttled_reqs);
+ memset(&bs_new->io_base, 0, sizeof(bs_new->io_base));
+ memset(&bs_new->io_limits, 0, sizeof(bs_new->io_limits));
+ bdrv_iostatus_disable(bs_new);
+
+ /* we don't use bdrv_io_limits_disable() for this, because we don't want
+ * to affect or delete the block_timer, as it has been moved to bs_top */
+ bs_new->io_limits_enabled = false;
+ bs_new->block_timer = NULL;
+ bs_new->slice_time = 0;
+ bs_new->slice_start = 0;
+ bs_new->slice_end = 0;
+}
+
void bdrv_delete(BlockDriverState *bs)
{
assert(!bs->dev);
+ assert(!bs->job);
+ assert(!bs->in_use);
/* remove from list, if necessary */
bdrv_make_anon(bs);
}
}
+void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
+ BlockQMPEventAction action, int is_read)
+{
+ QObject *data;
+ const char *action_str;
+
+ switch (action) {
+ case BDRV_ACTION_REPORT:
+ action_str = "report";
+ break;
+ case BDRV_ACTION_IGNORE:
+ action_str = "ignore";
+ break;
+ case BDRV_ACTION_STOP:
+ action_str = "stop";
+ break;
+ default:
+ abort();
+ }
+
+ data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
+ bdrv->device_name,
+ action_str,
+ is_read ? "read" : "write");
+ monitor_protocol_event(QEVENT_BLOCK_IO_ERROR, data);
+
+ qobject_decref(data);
+}
+
+static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
+{
+ QObject *data;
+
+ data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
+ bdrv_get_device_name(bs), ejected);
+ monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
+
+ qobject_decref(data);
+}
+
static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
{
if (bs->dev_ops && bs->dev_ops->change_media_cb) {
+ bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
bs->dev_ops->change_media_cb(bs->dev_opaque, load);
+ if (tray_was_closed) {
+ /* tray open */
+ bdrv_emit_qmp_eject_event(bs, true);
+ }
+ if (load) {
+ /* tray close */
+ bdrv_emit_qmp_eject_event(bs, false);
+ }
}
}
return -EACCES;
}
+ if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
+ return -EBUSY;
+ }
+
backing_drv = bs->backing_hd->drv;
ro = bs->backing_hd->read_only;
strncpy(filename, bs->backing_hd->filename, sizeof(filename));
buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
for (sector = 0; sector < total_sectors; sector += n) {
- if (drv->bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n)) {
+ if (bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n)) {
if (bdrv_read(bs, sector, buf, n) != 0) {
ret = -EIO;
return ret;
}
-void bdrv_commit_all(void)
+int bdrv_commit_all(void)
{
BlockDriverState *bs;
QTAILQ_FOREACH(bs, &bdrv_states, list) {
- bdrv_commit(bs);
+ int ret = bdrv_commit(bs);
+ if (ret < 0) {
+ return ret;
+ }
+ }
+ return 0;
+}
+
+struct BdrvTrackedRequest {
+ BlockDriverState *bs;
+ int64_t sector_num;
+ int nb_sectors;
+ bool is_write;
+ QLIST_ENTRY(BdrvTrackedRequest) list;
+ Coroutine *co; /* owner, used for deadlock detection */
+ CoQueue wait_queue; /* coroutines blocked on this request */
+};
+
+/**
+ * Remove an active request from the tracked requests list
+ *
+ * This function should be called when a tracked request is completing.
+ */
+static void tracked_request_end(BdrvTrackedRequest *req)
+{
+ QLIST_REMOVE(req, list);
+ qemu_co_queue_restart_all(&req->wait_queue);
+}
+
+/**
+ * Add an active request to the tracked requests list
+ */
+static void tracked_request_begin(BdrvTrackedRequest *req,
+ BlockDriverState *bs,
+ int64_t sector_num,
+ int nb_sectors, bool is_write)
+{
+ *req = (BdrvTrackedRequest){
+ .bs = bs,
+ .sector_num = sector_num,
+ .nb_sectors = nb_sectors,
+ .is_write = is_write,
+ .co = qemu_coroutine_self(),
+ };
+
+ qemu_co_queue_init(&req->wait_queue);
+
+ QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
+}
+
+/**
+ * Round a region to cluster boundaries
+ */
+static void round_to_clusters(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors,
+ int64_t *cluster_sector_num,
+ int *cluster_nb_sectors)
+{
+ BlockDriverInfo bdi;
+
+ if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
+ *cluster_sector_num = sector_num;
+ *cluster_nb_sectors = nb_sectors;
+ } else {
+ int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
+ *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
+ *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
+ nb_sectors, c);
}
}
+static bool tracked_request_overlaps(BdrvTrackedRequest *req,
+ int64_t sector_num, int nb_sectors) {
+ /* aaaa bbbb */
+ if (sector_num >= req->sector_num + req->nb_sectors) {
+ return false;
+ }
+ /* bbbb aaaa */
+ if (req->sector_num >= sector_num + nb_sectors) {
+ return false;
+ }
+ return true;
+}
+
+static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors)
+{
+ BdrvTrackedRequest *req;
+ int64_t cluster_sector_num;
+ int cluster_nb_sectors;
+ bool retry;
+
+ /* If we touch the same cluster it counts as an overlap. This guarantees
+ * that allocating writes will be serialized and not race with each other
+ * for the same cluster. For example, in copy-on-read it ensures that the
+ * CoR read and write operations are atomic and guest writes cannot
+ * interleave between them.
+ */
+ round_to_clusters(bs, sector_num, nb_sectors,
+ &cluster_sector_num, &cluster_nb_sectors);
+
+ do {
+ retry = false;
+ QLIST_FOREACH(req, &bs->tracked_requests, list) {
+ if (tracked_request_overlaps(req, cluster_sector_num,
+ cluster_nb_sectors)) {
+ /* Hitting this means there was a reentrant request, for
+ * example, a block driver issuing nested requests. This must
+ * never happen since it means deadlock.
+ */
+ assert(qemu_coroutine_self() != req->co);
+
+ qemu_co_queue_wait(&req->wait_queue);
+ retry = true;
+ break;
+ }
+ }
+ } while (retry);
+}
+
/*
* Return values:
* 0 - success
if (!rwco->is_write) {
rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
- rwco->nb_sectors, rwco->qiov);
+ rwco->nb_sectors, rwco->qiov, 0);
} else {
rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
- rwco->nb_sectors, rwco->qiov);
+ rwco->nb_sectors, rwco->qiov, 0);
}
}
qemu_iovec_init_external(&qiov, &iov, 1);
+ /**
+ * In sync call context, when the vcpu is blocked, this throttling timer
+ * will not fire; so the I/O throttling function has to be disabled here
+ * if it has been enabled.
+ */
+ if (bs->io_limits_enabled) {
+ fprintf(stderr, "Disabling I/O throttling on '%s' due "
+ "to synchronous I/O.\n", bdrv_get_device_name(bs));
+ bdrv_io_limits_disable(bs);
+ }
+
if (qemu_in_coroutine()) {
/* Fast-path if already in coroutine context */
bdrv_rw_co_entry(&rwco);
return 0;
}
+static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
+{
+ /* Perform I/O through a temporary buffer so that users who scribble over
+ * their read buffer while the operation is in progress do not end up
+ * modifying the image file. This is critical for zero-copy guest I/O
+ * where anything might happen inside guest memory.
+ */
+ void *bounce_buffer;
+
+ BlockDriver *drv = bs->drv;
+ struct iovec iov;
+ QEMUIOVector bounce_qiov;
+ int64_t cluster_sector_num;
+ int cluster_nb_sectors;
+ size_t skip_bytes;
+ int ret;
+
+ /* Cover entire cluster so no additional backing file I/O is required when
+ * allocating cluster in the image file.
+ */
+ round_to_clusters(bs, sector_num, nb_sectors,
+ &cluster_sector_num, &cluster_nb_sectors);
+
+ trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
+ cluster_sector_num, cluster_nb_sectors);
+
+ iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
+ iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
+ qemu_iovec_init_external(&bounce_qiov, &iov, 1);
+
+ ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
+ &bounce_qiov);
+ if (ret < 0) {
+ goto err;
+ }
+
+ if (drv->bdrv_co_write_zeroes &&
+ buffer_is_zero(bounce_buffer, iov.iov_len)) {
+ ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
+ cluster_nb_sectors);
+ } else {
+ ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
+ &bounce_qiov);
+ }
+
+ if (ret < 0) {
+ /* It might be okay to ignore write errors for guest requests. If this
+ * is a deliberate copy-on-read then we don't want to ignore the error.
+ * Simply report it in all cases.
+ */
+ goto err;
+ }
+
+ skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
+ qemu_iovec_from_buffer(qiov, bounce_buffer + skip_bytes,
+ nb_sectors * BDRV_SECTOR_SIZE);
+
+err:
+ qemu_vfree(bounce_buffer);
+ return ret;
+}
+
/*
* Handle a read request in coroutine context
*/
static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
+ int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
+ BdrvRequestFlags flags)
{
BlockDriver *drv = bs->drv;
+ BdrvTrackedRequest req;
+ int ret;
if (!drv) {
return -ENOMEDIUM;
bdrv_io_limits_intercept(bs, false, nb_sectors);
}
- return drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
+ if (bs->copy_on_read) {
+ flags |= BDRV_REQ_COPY_ON_READ;
+ }
+ if (flags & BDRV_REQ_COPY_ON_READ) {
+ bs->copy_on_read_in_flight++;
+ }
+
+ if (bs->copy_on_read_in_flight) {
+ wait_for_overlapping_requests(bs, sector_num, nb_sectors);
+ }
+
+ tracked_request_begin(&req, bs, sector_num, nb_sectors, false);
+
+ if (flags & BDRV_REQ_COPY_ON_READ) {
+ int pnum;
+
+ ret = bdrv_co_is_allocated(bs, sector_num, nb_sectors, &pnum);
+ if (ret < 0) {
+ goto out;
+ }
+
+ if (!ret || pnum != nb_sectors) {
+ ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
+ goto out;
+ }
+ }
+
+ ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
+
+out:
+ tracked_request_end(&req);
+
+ if (flags & BDRV_REQ_COPY_ON_READ) {
+ bs->copy_on_read_in_flight--;
+ }
+
+ return ret;
}
int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
{
trace_bdrv_co_readv(bs, sector_num, nb_sectors);
- return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov);
+ return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
+}
+
+int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
+{
+ trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
+
+ return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
+ BDRV_REQ_COPY_ON_READ);
+}
+
+static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors)
+{
+ BlockDriver *drv = bs->drv;
+ QEMUIOVector qiov;
+ struct iovec iov;
+ int ret;
+
+ /* TODO Emulate only part of misaligned requests instead of letting block
+ * drivers return -ENOTSUP and emulate everything */
+
+ /* First try the efficient write zeroes operation */
+ if (drv->bdrv_co_write_zeroes) {
+ ret = drv->bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
+ if (ret != -ENOTSUP) {
+ return ret;
+ }
+ }
+
+ /* Fall back to bounce buffer if write zeroes is unsupported */
+ iov.iov_len = nb_sectors * BDRV_SECTOR_SIZE;
+ iov.iov_base = qemu_blockalign(bs, iov.iov_len);
+ memset(iov.iov_base, 0, iov.iov_len);
+ qemu_iovec_init_external(&qiov, &iov, 1);
+
+ ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, &qiov);
+
+ qemu_vfree(iov.iov_base);
+ return ret;
}
/*
* Handle a write request in coroutine context
*/
static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
+ int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
+ BdrvRequestFlags flags)
{
BlockDriver *drv = bs->drv;
+ BdrvTrackedRequest req;
int ret;
if (!bs->drv) {
bdrv_io_limits_intercept(bs, true, nb_sectors);
}
- ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
+ if (bs->copy_on_read_in_flight) {
+ wait_for_overlapping_requests(bs, sector_num, nb_sectors);
+ }
+
+ tracked_request_begin(&req, bs, sector_num, nb_sectors, true);
+
+ if (flags & BDRV_REQ_ZERO_WRITE) {
+ ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors);
+ } else {
+ ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
+ }
if (bs->dirty_bitmap) {
set_dirty_bitmap(bs, sector_num, nb_sectors, 1);
bs->wr_highest_sector = sector_num + nb_sectors - 1;
}
+ tracked_request_end(&req);
+
return ret;
}
{
trace_bdrv_co_writev(bs, sector_num, nb_sectors);
- return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov);
+ return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
+}
+
+int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors)
+{
+ trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
+
+ return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
+ BDRV_REQ_ZERO_WRITE);
}
/**
struct partition *p;
uint32_t nr_sects;
uint64_t nb_sectors;
+ bool enabled;
bdrv_get_geometry(bs, &nb_sectors);
+ /**
+ * The function will be invoked during startup not only in sync I/O mode,
+ * but also in async I/O mode. So the I/O throttling function has to
+ * be disabled temporarily here, not permanently.
+ */
+ enabled = bs->io_limits_enabled;
+ bs->io_limits_enabled = false;
ret = bdrv_read(bs, 0, buf, 1);
+ bs->io_limits_enabled = enabled;
if (ret < 0)
return -1;
/* test msdos magic */
uint8_t last_sect;
uint8_t max_track;
uint8_t max_head;
+ FDriveRate rate;
} FDFormat;
static const FDFormat fd_formats[] = {
/* First entry is default format */
/* 1.44 MB 3"1/2 floppy disks */
- { FDRIVE_DRV_144, 18, 80, 1, },
- { FDRIVE_DRV_144, 20, 80, 1, },
- { FDRIVE_DRV_144, 21, 80, 1, },
- { FDRIVE_DRV_144, 21, 82, 1, },
- { FDRIVE_DRV_144, 21, 83, 1, },
- { FDRIVE_DRV_144, 22, 80, 1, },
- { FDRIVE_DRV_144, 23, 80, 1, },
- { FDRIVE_DRV_144, 24, 80, 1, },
+ { FDRIVE_DRV_144, 18, 80, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_144, 20, 80, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_144, 21, 80, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_144, 21, 82, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_144, 21, 83, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_144, 22, 80, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_144, 23, 80, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_144, 24, 80, 1, FDRIVE_RATE_500K, },
/* 2.88 MB 3"1/2 floppy disks */
- { FDRIVE_DRV_288, 36, 80, 1, },
- { FDRIVE_DRV_288, 39, 80, 1, },
- { FDRIVE_DRV_288, 40, 80, 1, },
- { FDRIVE_DRV_288, 44, 80, 1, },
- { FDRIVE_DRV_288, 48, 80, 1, },
+ { FDRIVE_DRV_288, 36, 80, 1, FDRIVE_RATE_1M, },
+ { FDRIVE_DRV_288, 39, 80, 1, FDRIVE_RATE_1M, },
+ { FDRIVE_DRV_288, 40, 80, 1, FDRIVE_RATE_1M, },
+ { FDRIVE_DRV_288, 44, 80, 1, FDRIVE_RATE_1M, },
+ { FDRIVE_DRV_288, 48, 80, 1, FDRIVE_RATE_1M, },
/* 720 kB 3"1/2 floppy disks */
- { FDRIVE_DRV_144, 9, 80, 1, },
- { FDRIVE_DRV_144, 10, 80, 1, },
- { FDRIVE_DRV_144, 10, 82, 1, },
- { FDRIVE_DRV_144, 10, 83, 1, },
- { FDRIVE_DRV_144, 13, 80, 1, },
- { FDRIVE_DRV_144, 14, 80, 1, },
+ { FDRIVE_DRV_144, 9, 80, 1, FDRIVE_RATE_250K, },
+ { FDRIVE_DRV_144, 10, 80, 1, FDRIVE_RATE_250K, },
+ { FDRIVE_DRV_144, 10, 82, 1, FDRIVE_RATE_250K, },
+ { FDRIVE_DRV_144, 10, 83, 1, FDRIVE_RATE_250K, },
+ { FDRIVE_DRV_144, 13, 80, 1, FDRIVE_RATE_250K, },
+ { FDRIVE_DRV_144, 14, 80, 1, FDRIVE_RATE_250K, },
/* 1.2 MB 5"1/4 floppy disks */
- { FDRIVE_DRV_120, 15, 80, 1, },
- { FDRIVE_DRV_120, 18, 80, 1, },
- { FDRIVE_DRV_120, 18, 82, 1, },
- { FDRIVE_DRV_120, 18, 83, 1, },
- { FDRIVE_DRV_120, 20, 80, 1, },
+ { FDRIVE_DRV_120, 15, 80, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_120, 18, 80, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_120, 18, 82, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_120, 18, 83, 1, FDRIVE_RATE_500K, },
+ { FDRIVE_DRV_120, 20, 80, 1, FDRIVE_RATE_500K, },
/* 720 kB 5"1/4 floppy disks */
- { FDRIVE_DRV_120, 9, 80, 1, },
- { FDRIVE_DRV_120, 11, 80, 1, },
+ { FDRIVE_DRV_120, 9, 80, 1, FDRIVE_RATE_250K, },
+ { FDRIVE_DRV_120, 11, 80, 1, FDRIVE_RATE_250K, },
/* 360 kB 5"1/4 floppy disks */
- { FDRIVE_DRV_120, 9, 40, 1, },
- { FDRIVE_DRV_120, 9, 40, 0, },
- { FDRIVE_DRV_120, 10, 41, 1, },
- { FDRIVE_DRV_120, 10, 42, 1, },
+ { FDRIVE_DRV_120, 9, 40, 1, FDRIVE_RATE_300K, },
+ { FDRIVE_DRV_120, 9, 40, 0, FDRIVE_RATE_300K, },
+ { FDRIVE_DRV_120, 10, 41, 1, FDRIVE_RATE_300K, },
+ { FDRIVE_DRV_120, 10, 42, 1, FDRIVE_RATE_300K, },
/* 320 kB 5"1/4 floppy disks */
- { FDRIVE_DRV_120, 8, 40, 1, },
- { FDRIVE_DRV_120, 8, 40, 0, },
+ { FDRIVE_DRV_120, 8, 40, 1, FDRIVE_RATE_250K, },
+ { FDRIVE_DRV_120, 8, 40, 0, FDRIVE_RATE_250K, },
/* 360 kB must match 5"1/4 better than 3"1/2... */
- { FDRIVE_DRV_144, 9, 80, 0, },
+ { FDRIVE_DRV_144, 9, 80, 0, FDRIVE_RATE_250K, },
/* end */
- { FDRIVE_DRV_NONE, -1, -1, 0, },
+ { FDRIVE_DRV_NONE, -1, -1, 0, 0, },
};
void bdrv_get_floppy_geometry_hint(BlockDriverState *bs, int *nb_heads,
int *max_track, int *last_sect,
- FDriveType drive_in, FDriveType *drive)
+ FDriveType drive_in, FDriveType *drive,
+ FDriveRate *rate)
{
const FDFormat *parse;
uint64_t nb_sectors, size;
bdrv_get_geometry_hint(bs, nb_heads, max_track, last_sect);
if (*nb_heads != 0 && *max_track != 0 && *last_sect != 0) {
/* User defined disk */
+ *rate = FDRIVE_RATE_500K;
} else {
bdrv_get_geometry(bs, &nb_sectors);
match = -1;
*max_track = parse->max_track;
*last_sect = parse->last_sect;
*drive = parse->drive;
+ *rate = parse->rate;
}
}
BlockDriverState *bs;
QTAILQ_FOREACH(bs, &bdrv_states, list) {
- if (!bdrv_is_read_only(bs) && bdrv_is_inserted(bs)) {
- bdrv_flush(bs);
- }
+ bdrv_flush(bs);
}
}
return 1;
}
+typedef struct BdrvCoIsAllocatedData {
+ BlockDriverState *bs;
+ int64_t sector_num;
+ int nb_sectors;
+ int *pnum;
+ int ret;
+ bool done;
+} BdrvCoIsAllocatedData;
+
/*
* Returns true iff the specified sector is present in the disk image. Drivers
* not implementing the functionality are assumed to not support backing files,
* hence all their sectors are reported as allocated.
*
+ * If 'sector_num' is beyond the end of the disk image the return value is 0
+ * and 'pnum' is set to 0.
+ *
* 'pnum' is set to the number of sectors (including and immediately following
* the specified sector) that are known to be in the same
* allocated/unallocated state.
*
- * 'nb_sectors' is the max value 'pnum' should be set to.
+ * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
+ * beyond the end of the disk image it will be clamped.
*/
-int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
- int *pnum)
+int coroutine_fn bdrv_co_is_allocated(BlockDriverState *bs, int64_t sector_num,
+ int nb_sectors, int *pnum)
{
int64_t n;
- if (!bs->drv->bdrv_is_allocated) {
- if (sector_num >= bs->total_sectors) {
- *pnum = 0;
- return 0;
- }
- n = bs->total_sectors - sector_num;
- *pnum = (n < nb_sectors) ? (n) : (nb_sectors);
+
+ if (sector_num >= bs->total_sectors) {
+ *pnum = 0;
+ return 0;
+ }
+
+ n = bs->total_sectors - sector_num;
+ if (n < nb_sectors) {
+ nb_sectors = n;
+ }
+
+ if (!bs->drv->bdrv_co_is_allocated) {
+ *pnum = nb_sectors;
return 1;
}
- return bs->drv->bdrv_is_allocated(bs, sector_num, nb_sectors, pnum);
+
+ return bs->drv->bdrv_co_is_allocated(bs, sector_num, nb_sectors, pnum);
}
-void bdrv_mon_event(const BlockDriverState *bdrv,
- BlockMonEventAction action, int is_read)
+/* Coroutine wrapper for bdrv_is_allocated() */
+static void coroutine_fn bdrv_is_allocated_co_entry(void *opaque)
{
- QObject *data;
- const char *action_str;
+ BdrvCoIsAllocatedData *data = opaque;
+ BlockDriverState *bs = data->bs;
- switch (action) {
- case BDRV_ACTION_REPORT:
- action_str = "report";
- break;
- case BDRV_ACTION_IGNORE:
- action_str = "ignore";
- break;
- case BDRV_ACTION_STOP:
- action_str = "stop";
- break;
- default:
- abort();
- }
+ data->ret = bdrv_co_is_allocated(bs, data->sector_num, data->nb_sectors,
+ data->pnum);
+ data->done = true;
+}
- data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
- bdrv->device_name,
- action_str,
- is_read ? "read" : "write");
- monitor_protocol_event(QEVENT_BLOCK_IO_ERROR, data);
+/*
+ * Synchronous wrapper around bdrv_co_is_allocated().
+ *
+ * See bdrv_co_is_allocated() for details.
+ */
+int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
+ int *pnum)
+{
+ Coroutine *co;
+ BdrvCoIsAllocatedData data = {
+ .bs = bs,
+ .sector_num = sector_num,
+ .nb_sectors = nb_sectors,
+ .pnum = pnum,
+ .done = false,
+ };
- qobject_decref(data);
+ co = qemu_coroutine_create(bdrv_is_allocated_co_entry);
+ qemu_coroutine_enter(co, &data);
+ while (!data.done) {
+ qemu_aio_wait();
+ }
+ return data.ret;
}
BlockInfoList *qmp_query_block(Error **errp)
info->value->inserted->has_backing_file = true;
info->value->inserted->backing_file = g_strdup(bs->backing_file);
}
+
+ if (bs->io_limits_enabled) {
+ info->value->inserted->bps =
+ bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
+ info->value->inserted->bps_rd =
+ bs->io_limits.bps[BLOCK_IO_LIMIT_READ];
+ info->value->inserted->bps_wr =
+ bs->io_limits.bps[BLOCK_IO_LIMIT_WRITE];
+ info->value->inserted->iops =
+ bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
+ info->value->inserted->iops_rd =
+ bs->io_limits.iops[BLOCK_IO_LIMIT_READ];
+ info->value->inserted->iops_wr =
+ bs->io_limits.iops[BLOCK_IO_LIMIT_WRITE];
+ }
}
/* XXX: waiting for the qapi to support GSList */
return -ENOTSUP;
}
+BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
+ const char *backing_file)
+{
+ if (!bs->drv) {
+ return NULL;
+ }
+
+ if (bs->backing_hd) {
+ if (strcmp(bs->backing_file, backing_file) == 0) {
+ return bs->backing_hd;
+ } else {
+ return bdrv_find_backing_image(bs->backing_hd, backing_file);
+ }
+ }
+
+ return NULL;
+}
+
#define NB_SUFFIXES 4
char *get_human_readable_size(char *buf, int buf_size, int64_t size)
BlockDriverCompletionFunc *cb;
void *opaque;
QEMUIOVector *free_qiov;
- void *free_buf;
} callbacks[];
} MultiwriteCB;
qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
}
g_free(mcb->callbacks[i].free_qiov);
- qemu_vfree(mcb->callbacks[i].free_buf);
}
}
int merge = 0;
int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
- // This handles the cases that are valid for all block drivers, namely
- // exactly sequential writes and overlapping writes.
+ // Handle exactly sequential writes and overlapping writes.
if (reqs[i].sector <= oldreq_last) {
merge = 1;
}
- // The block driver may decide that it makes sense to combine requests
- // even if there is a gap of some sectors between them. In this case,
- // the gap is filled with zeros (therefore only applicable for yet
- // unused space in format like qcow2).
- if (!merge && bs->drv->bdrv_merge_requests) {
- merge = bs->drv->bdrv_merge_requests(bs, &reqs[outidx], &reqs[i]);
- }
-
if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
merge = 0;
}
size = (reqs[i].sector - reqs[outidx].sector) << 9;
qemu_iovec_concat(qiov, reqs[outidx].qiov, size);
- // We might need to add some zeros between the two requests
- if (reqs[i].sector > oldreq_last) {
- size_t zero_bytes = (reqs[i].sector - oldreq_last) << 9;
- uint8_t *buf = qemu_blockalign(bs, zero_bytes);
- memset(buf, 0, zero_bytes);
- qemu_iovec_add(qiov, buf, zero_bytes);
- mcb->callbacks[i].free_buf = buf;
- }
+ // We should need to add any zeros between the two requests
+ assert (reqs[i].sector <= oldreq_last);
// Add the second request
qemu_iovec_concat(qiov, reqs[i].qiov, reqs[i].qiov->size);
*/
int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
{
- BlockDriverAIOCB *acb;
MultiwriteCB *mcb;
int i;
trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
- /*
- * Run the aio requests. As soon as one request can't be submitted
- * successfully, fail all requests that are not yet submitted (we must
- * return failure for all requests anyway)
- *
- * num_requests cannot be set to the right value immediately: If
- * bdrv_aio_writev fails for some request, num_requests would be too high
- * and therefore multiwrite_cb() would never recognize the multiwrite
- * request as completed. We also cannot use the loop variable i to set it
- * when the first request fails because the callback may already have been
- * called for previously submitted requests. Thus, num_requests must be
- * incremented for each request that is submitted.
- *
- * The problem that callbacks may be called early also means that we need
- * to take care that num_requests doesn't become 0 before all requests are
- * submitted - multiwrite_cb() would consider the multiwrite request
- * completed. A dummy request that is "completed" by a manual call to
- * multiwrite_cb() takes care of this.
- */
- mcb->num_requests = 1;
-
- // Run the aio requests
+ /* Run the aio requests. */
+ mcb->num_requests = num_reqs;
for (i = 0; i < num_reqs; i++) {
- mcb->num_requests++;
- acb = bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
+ bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
reqs[i].nb_sectors, multiwrite_cb, mcb);
-
- if (acb == NULL) {
- // We can only fail the whole thing if no request has been
- // submitted yet. Otherwise we'll wait for the submitted AIOs to
- // complete and report the error in the callback.
- if (i == 0) {
- trace_bdrv_aio_multiwrite_earlyfail(mcb);
- goto fail;
- } else {
- trace_bdrv_aio_multiwrite_latefail(mcb, i);
- multiwrite_cb(mcb, -EIO);
- break;
- }
- }
}
- /* Complete the dummy request */
- multiwrite_cb(mcb, 0);
-
return 0;
-
-fail:
- for (i = 0; i < mcb->num_callbacks; i++) {
- reqs[i].error = -EIO;
- }
- g_free(mcb);
- return -1;
}
void bdrv_aio_cancel(BlockDriverAIOCB *acb)
acb->is_write = is_write;
acb->qiov = qiov;
acb->bounce = qemu_blockalign(bs, qiov->size);
-
- if (!acb->bh)
- acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
+ acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
if (is_write) {
qemu_iovec_to_buffer(acb->qiov, acb->bounce);
if (!acb->is_write) {
acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
- acb->req.nb_sectors, acb->req.qiov);
+ acb->req.nb_sectors, acb->req.qiov, 0);
} else {
acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
- acb->req.nb_sectors, acb->req.qiov);
+ acb->req.nb_sectors, acb->req.qiov, 0);
}
acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
{
int ret;
- if (!bs->drv) {
+ if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
return 0;
}
}
if (bs->drv->bdrv_co_flush_to_disk) {
- return bs->drv->bdrv_co_flush_to_disk(bs);
+ ret = bs->drv->bdrv_co_flush_to_disk(bs);
} else if (bs->drv->bdrv_aio_flush) {
BlockDriverAIOCB *acb;
CoroutineIOCompletion co = {
acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
if (acb == NULL) {
- return -EIO;
+ ret = -EIO;
} else {
qemu_coroutine_yield();
- return co.ret;
+ ret = co.ret;
}
} else {
/*
*
* Let's hope the user knows what he's doing.
*/
- return 0;
+ ret = 0;
+ }
+ if (ret < 0) {
+ return ret;
}
+
+ /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
+ * in the case of cache=unsafe, so there are no useless flushes.
+ */
+ return bdrv_co_flush(bs->file);
}
void bdrv_invalidate_cache(BlockDriverState *bs)
}
}
+void bdrv_clear_incoming_migration_all(void)
+{
+ BlockDriverState *bs;
+
+ QTAILQ_FOREACH(bs, &bdrv_states, list) {
+ bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
+ }
+}
+
int bdrv_flush(BlockDriverState *bs)
{
Coroutine *co;
/**
* If eject_flag is TRUE, eject the media. Otherwise, close the tray
*/
-void bdrv_eject(BlockDriverState *bs, int eject_flag)
+void bdrv_eject(BlockDriverState *bs, bool eject_flag)
{
BlockDriver *drv = bs->drv;
if (drv && drv->bdrv_eject) {
drv->bdrv_eject(bs, eject_flag);
}
+
+ if (bs->device_name[0] != '\0') {
+ bdrv_emit_qmp_eject_event(bs, eject_flag);
+ }
}
/**
return ret;
}
+
+void *block_job_create(const BlockJobType *job_type, BlockDriverState *bs,
+ BlockDriverCompletionFunc *cb, void *opaque)
+{
+ BlockJob *job;
+
+ if (bs->job || bdrv_in_use(bs)) {
+ return NULL;
+ }
+ bdrv_set_in_use(bs, 1);
+
+ job = g_malloc0(job_type->instance_size);
+ job->job_type = job_type;
+ job->bs = bs;
+ job->cb = cb;
+ job->opaque = opaque;
+ bs->job = job;
+ return job;
+}
+
+void block_job_complete(BlockJob *job, int ret)
+{
+ BlockDriverState *bs = job->bs;
+
+ assert(bs->job == job);
+ job->cb(job->opaque, ret);
+ bs->job = NULL;
+ g_free(job);
+ bdrv_set_in_use(bs, 0);
+}
+
+int block_job_set_speed(BlockJob *job, int64_t value)
+{
+ int rc;
+
+ if (!job->job_type->set_speed) {
+ return -ENOTSUP;
+ }
+ rc = job->job_type->set_speed(job, value);
+ if (rc == 0) {
+ job->speed = value;
+ }
+ return rc;
+}
+
+void block_job_cancel(BlockJob *job)
+{
+ job->cancelled = true;
+}
+
+bool block_job_is_cancelled(BlockJob *job)
+{
+ return job->cancelled;
+}
+
+void block_job_cancel_sync(BlockJob *job)
+{
+ BlockDriverState *bs = job->bs;
+
+ assert(bs->job == job);
+ block_job_cancel(job);
+ while (bs->job != NULL && bs->job->busy) {
+ qemu_aio_wait();
+ }
+}
projects / qemu.git / blobdiff