Display version information and exit
ETEXI
-DEF("M", HAS_ARG, QEMU_OPTION_M,
- "-M machine select emulated machine (-M ? for list)\n", QEMU_ARCH_ALL)
+DEF("machine", HAS_ARG, QEMU_OPTION_machine, \
+ "-machine [type=]name[,prop[=value][,...]]\n"
+ " selects emulated machine (-machine ? for list)\n"
+ " property accel=accel1[:accel2[:...]] selects accelerator\n"
+ " supported accelerators are kvm, xen, tcg (default: tcg)\n",
+ QEMU_ARCH_ALL)
STEXI
-@item -M @var{machine}
-@findex -M
-Select the emulated @var{machine} (@code{-M ?} for list)
+@item -machine [type=]@var{name}[,prop=@var{value}[,...]]
+@findex -machine
+Select the emulated machine by @var{name}. Use @code{-machine ?} to list
+available machines. Supported machine properties are:
+@table @option
+@item accel=@var{accels1}[:@var{accels2}[:...]]
+This is used to enable an accelerator. Depending on the target architecture,
+kvm, xen, or tcg can be available. By default, tcg is used. If there is more
+than one accelerator specified, the next one is used if the previous one fails
+to initialize.
+@end table
ETEXI
+HXCOMM Deprecated by -machine
+DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL)
+
DEF("cpu", HAS_ARG, QEMU_OPTION_cpu,
"-cpu cpu select CPU (-cpu ? for list)\n", QEMU_ARCH_ALL)
STEXI
DEF("drive", HAS_ARG, QEMU_OPTION_drive,
"-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
" [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
- " [,cache=writethrough|writeback|none|unsafe][,format=f]\n"
+ " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
" [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
" [,readonly=on|off]\n"
" use 'file' as a drive image\n", QEMU_ARCH_ALL)
@item snapshot=@var{snapshot}
@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
@item cache=@var{cache}
-@var{cache} is "none", "writeback", "unsafe", or "writethrough" and controls how the host cache is used to access block data.
+@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
@item aio=@var{aio}
@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO.
@item format=@var{format}
This option specifies the serial number to assign to the device.
@item addr=@var{addr}
Specify the controller's PCI address (if=virtio only).
+@item werror=@var{action},rerror=@var{action}
+Specify which @var{action} to take on write and read errors. Valid actions are:
+"ignore" (ignore the error and try to continue), "stop" (pause QEMU),
+"report" (report the error to the guest), "enospc" (pause QEMU only if the
+host disk is full; report the error to the guest otherwise).
+The default setting is @option{werror=enospc} and @option{rerror=report}.
+@item readonly
+Open drive @option{file} as read-only. Guest write attempts will fail.
@end table
By default, writethrough caching is used for all block device. This means that
attempt to do disk IO directly to the guests memory. QEMU may still perform
an internal copy of the data.
+The host page cache can be avoided while only sending write notifications to
+the guest when the data has been reported as written by the storage subsystem
+using @option{cache=directsync}.
+
Some block drivers perform badly with @option{cache=writethrough}, most notably,
qcow2. If performance is more important than correctness,
@option{cache=writeback} should be used with qcow2.
DEF("boot", HAS_ARG, QEMU_OPTION_boot,
"-boot [order=drives][,once=drives][,menu=on|off]\n"
- " 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n",
+ " [,splash=sp_name][,splash-time=sp_time]\n"
+ " 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n"
+ " 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on\n"
+ " 'sp_time': the period that splash picture last if menu=on, unit is ms\n",
QEMU_ARCH_ALL)
STEXI
-@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off]
+@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}]
@findex -boot
Specify boot order @var{drives} as a string of drive letters. Valid
drive letters depend on the target achitecture. The x86 PC uses: a, b
Interactive boot menus/prompts can be enabled via @option{menu=on} as far
as firmware/BIOS supports them. The default is non-interactive boot.
+A splash picture could be passed to bios, enabling user to show it as logo,
+when option splash=@var{sp_name} is given and menu=on, If firmware/BIOS
+supports them. Currently Seabios for X86 system support it.
+limitation: The splash file could be a jpeg file or a BMP file in 24 BPP
+format(true color). The resolution should be supported by the SVGA mode, so
+the recommended is 320x240, 640x480, 800x640.
+
@example
# try to boot from network first, then from hard disk
qemu -boot order=nc
# boot from CD-ROM first, switch back to default order after reboot
qemu -boot once=d
+# boot with a splash picture for 5 seconds.
+qemu -boot menu=on,splash=/root/boot.bmp,splash-time=5000
@end example
Note: The legacy format '-boot @var{drives}' is still supported but its
Rotate graphical output 90 deg left (only PXA LCD).
ETEXI
+DEF("rotate", HAS_ARG, QEMU_OPTION_rotate,
+ "-rotate <deg> rotate graphical output some deg left (only PXA LCD)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -rotate
+@findex -rotate
+Rotate graphical output some deg left (only PXA LCD).
+ETEXI
+
DEF("vga", HAS_ARG, QEMU_OPTION_vga,
"-vga [std|cirrus|vmware|qxl|xenfb|none]\n"
" select video card type\n", QEMU_ARCH_ALL)
ETEXI
DEF("acpitable", HAS_ARG, QEMU_OPTION_acpitable,
- "-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]\n"
+ "-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]\n"
" ACPI table description\n", QEMU_ARCH_I386)
STEXI
@item -acpitable [sig=@var{str}][,rev=@var{n}][,oem_id=@var{str}][,oem_table_id=@var{str}][,oem_rev=@var{n}] [,asl_compiler_id=@var{str}][,asl_compiler_rev=@var{n}][,data=@var{file1}[:@var{file2}]...]
@findex -acpitable
Add ACPI table with specified header fields and context from specified files.
+For file=, take whole ACPI table from the specified files, including all
+ACPI headers (possible overridden by other options).
+For data=, only data
+portion of the table is used, all header information is specified in the
+command line.
ETEXI
DEF("smbios", HAS_ARG, QEMU_OPTION_smbios,
"-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n"
" create a new Network Interface Card and connect it to VLAN 'n'\n"
#ifdef CONFIG_SLIRP
- "-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n]\n"
+ "-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]\n"
" [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]\n"
" [,hostfwd=rule][,guestfwd=rule]"
#ifndef _WIN32
Specify the guest-visible address of the host. Default is the 2nd IP in the
guest network, i.e. x.x.x.2.
-@item restrict=y|yes|n|no
-If this options is enabled, the guest will be isolated, i.e. it will not be
+@item restrict=on|off
+If this option is enabled, the guest will be isolated, i.e. it will not be
able to contact the host and no guest IP packets will be routed over the host
-to the outside. This option does not affect explicitly set forwarding rule.
+to the outside. This option does not affect any explicitly set forwarding rules.
@item hostname=@var{name}
Specifies the client hostname reported by the builtin DHCP server.
Then @file{@var{dir}} can be accessed in @file{\\smbserver\qemu}.
-Note that a SAMBA server must be installed on the host OS in
-@file{/usr/sbin/smbd}. QEMU was tested successfully with smbd versions from
-Red Hat 9, Fedora Core 3 and OpenSUSE 11.x.
+Note that a SAMBA server must be installed on the host OS.
+QEMU was tested successfully with smbd versions from Red Hat 9,
+Fedora Core 3 and OpenSUSE 11.x.
@item hostfwd=[tcp|udp]:[@var{hostaddr}]:@var{hostport}-[@var{guestaddr}]:@var{guestport}
Redirect incoming TCP or UDP connections to the host port @var{hostport} to
Output log in /tmp/qemu.log
ETEXI
+DEF("D", HAS_ARG, QEMU_OPTION_D, \
+ "-D logfile output log to logfile (instead of the default /tmp/qemu.log)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -D
+@findex -D
+Output log in logfile instead of /tmp/qemu.log
+ETEXI
+
DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \
"-hdachs c,h,s[,t]\n" \
" force hard disk 0 physical geometry and the optional BIOS\n" \
if KVM support is enabled when compiling.
ETEXI
-DEF("machine", HAS_ARG, QEMU_OPTION_machine, \
- "-machine accel=accel1[:accel2] use an accelerator (kvm,xen,tcg), default is tcg\n", QEMU_ARCH_ALL)
-STEXI
-@item -machine accel=@var{accels}
-@findex -machine
-This is use to enable an accelerator, in kvm,xen,tcg.
-By default, it use only tcg. If there a more than one accelerator
-specified, the next one is used if the first don't work.
-ETEXI
-
DEF("xen-domid", HAS_ARG, QEMU_OPTION_xen_domid,
"-xen-domid id specify xen guest domain id\n", QEMU_ARCH_ALL)
DEF("xen-create", 0, QEMU_OPTION_xen_create,
@var{sysconfdir}/target-@var{ARCH}.conf on startup. The @code{-nodefconfig}
option will prevent QEMU from loading these configuration files at startup.
ETEXI
-#ifdef CONFIG_SIMPLE_TRACE
DEF("trace", HAS_ARG, QEMU_OPTION_trace,
- "-trace\n"
- " Specify a trace file to log traces to\n",
+ "-trace [events=<file>][,file=<file>]\n"
+ " specify tracing options\n",
QEMU_ARCH_ALL)
STEXI
-@item -trace
+HXCOMM This line is not accurate, as some sub-options are backend-specific but
+HXCOMM HX does not support conditional compilation of text.
+@item -trace [events=@var{file}][,file=@var{file}]
@findex -trace
-Specify a trace file to log output traces to.
+
+Specify tracing options.
+
+@table @option
+@item events=@var{file}
+Immediately enable events listed in @var{file}.
+The file must contain one event name (as listed in the @var{trace-events} file)
+per line.
+
+This option is only available when using the @var{simple} and @var{stderr}
+tracing backends.
+@item file=@var{file}
+Log output traces to @var{file}.
+
+This option is only available when using the @var{simple} tracing backend.
+@end table
ETEXI
-#endif
HXCOMM This is the last statement. Insert new options before this line!
STEXI
projects / qemu.git / blobdiff