#include <signal.h>
#include <setjmp.h>
#include "hw/qdev-core.h"
+#include "disas/bfd.h"
#include "exec/hwaddr.h"
+#include "exec/memattrs.h"
#include "qemu/queue.h"
#include "qemu/thread.h"
-#include "qemu/tls.h"
#include "qemu/typedefs.h"
typedef int (*WriteCoreDumpFunction)(const void *buf, size_t size,
* @cpu_exec_enter: Callback for cpu_exec preparation.
* @cpu_exec_exit: Callback for cpu_exec cleanup.
* @cpu_exec_interrupt: Callback for processing interrupts in cpu_exec.
+ * @disas_set_info: Setup architecture specific components of disassembly info
*
* Represents a CPU family or model.
*/
void (*cpu_exec_enter)(CPUState *cpu);
void (*cpu_exec_exit)(CPUState *cpu);
bool (*cpu_exec_interrupt)(CPUState *cpu, int interrupt_request);
+
+ void (*disas_set_info)(CPUState *cpu, disassemble_info *info);
} CPUClass;
#ifdef HOST_WORDS_BIGENDIAN
vaddr vaddr;
vaddr len;
vaddr hitaddr;
+ MemTxAttrs hitattrs;
int flags; /* BP_* */
QTAILQ_ENTRY(CPUWatchpoint) entry;
} CPUWatchpoint;
* @halted: Nonzero if the CPU is in suspended state.
* @stop: Indicates a pending stop request.
* @stopped: Indicates the CPU has been artificially stopped.
+ * @crash_occurred: Indicates the OS reported a crash (panic) for this CPU
* @tcg_exit_req: Set to force TCG to stop executing linked TBs for this
* CPU and return to its top level loop.
* @singlestep_enabled: Flags for single-stepping.
* @icount_decr: Number of cycles left, with interrupt flag in high bit.
* This allows a single read-compare-cbranch-write sequence to test
* for both decrementer underflow and exceptions.
- * @can_do_io: Nonzero if memory-mapped IO is safe.
+ * @can_do_io: Nonzero if memory-mapped IO is safe. Deterministic execution
+ * requires that IO only be performed on the last instruction of a TB
+ * so that interrupts take effect immediately.
* @env_ptr: Pointer to subclass-specific CPUArchState field.
* @current_tb: Currently executing TB.
* @gdb_regs: Additional GDB registers.
* @mem_io_pc: Host Program Counter at which the memory was accessed.
* @mem_io_vaddr: Target virtual address at which the memory was accessed.
* @kvm_fd: vCPU file descriptor for KVM.
+ * @work_mutex: Lock to prevent multiple access to queued_work_*.
+ * @queued_work_first: First asynchronous work pending.
*
* State of one CPU core or thread.
*/
uint32_t host_tid;
bool running;
struct QemuCond *halt_cond;
- struct qemu_work_item *queued_work_first, *queued_work_last;
bool thread_kicked;
bool created;
bool stop;
bool stopped;
- volatile sig_atomic_t exit_request;
+ bool crash_occurred;
+ bool exit_request;
uint32_t interrupt_request;
int singlestep_enabled;
int64_t icount_extra;
sigjmp_buf jmp_env;
+ QemuMutex work_mutex;
+ struct qemu_work_item *queued_work_first, *queued_work_last;
+
AddressSpace *as;
struct AddressSpaceDispatch *memory_dispatch;
MemoryListener *tcg_as_listener;
uint32_t can_do_io;
int32_t exception_index; /* used by m68k TCG */
+ /* Used to keep track of an outstanding cpu throttle thread for migration
+ * autoconverge
+ */
+ bool throttle_thread_scheduled;
+
/* Note that this is accessed at the start of every TB via a negative
offset from AREG0. Leave this field at the end so as to make the
(absolute value) offset as small as possible. This reduces code
size, especially for hosts without large memory offsets. */
- volatile sig_atomic_t tcg_exit_req;
+ uint32_t tcg_exit_req;
};
QTAILQ_HEAD(CPUTailQ, CPUState);
#define CPU_FOREACH(cpu) QTAILQ_FOREACH(cpu, &cpus, node)
#define CPU_FOREACH_SAFE(cpu, next_cpu) \
QTAILQ_FOREACH_SAFE(cpu, &cpus, node, next_cpu)
+#define CPU_FOREACH_REVERSE(cpu) \
+ QTAILQ_FOREACH_REVERSE(cpu, &cpus, CPUTailQ, node)
#define first_cpu QTAILQ_FIRST(&cpus)
-DECLARE_TLS(CPUState *, current_cpu);
-#define current_cpu tls_var(current_cpu)
+extern __thread CPUState *current_cpu;
/**
* cpu_paging_enabled:
*/
bool cpu_exists(int64_t id);
+/**
+ * cpu_throttle_set:
+ * @new_throttle_pct: Percent of sleep time. Valid range is 1 to 99.
+ *
+ * Throttles all vcpus by forcing them to sleep for the given percentage of
+ * time. A throttle_percentage of 25 corresponds to a 75% duty cycle roughly.
+ * (example: 10ms sleep for every 30ms awake).
+ *
+ * cpu_throttle_set can be called as needed to adjust new_throttle_pct.
+ * Once the throttling starts, it will remain in effect until cpu_throttle_stop
+ * is called.
+ */
+void cpu_throttle_set(int new_throttle_pct);
+
+/**
+ * cpu_throttle_stop:
+ *
+ * Stops the vcpu throttling started by cpu_throttle_set.
+ */
+void cpu_throttle_stop(void);
+
+/**
+ * cpu_throttle_active:
+ *
+ * Returns: %true if the vcpus are currently being throttled, %false otherwise.
+ */
+bool cpu_throttle_active(void);
+
+/**
+ * cpu_throttle_get_percentage:
+ *
+ * Returns the vcpu throttle percentage. See cpu_throttle_set for details.
+ *
+ * Returns: The throttle percentage in range 1 to 99.
+ */
+int cpu_throttle_get_percentage(void);
+
#ifndef CONFIG_USER_ONLY
typedef void (*CPUInterruptHandler)(CPUState *, int);
{
CPUClass *cc = CPU_GET_CLASS(cpu);
- return cc->do_unaligned_access(cpu, addr, is_write, is_user, retaddr);
+ cc->do_unaligned_access(cpu, addr, is_write, is_user, retaddr);
}
#endif
+/**
+ * cpu_set_pc:
+ * @cpu: The CPU to set the program counter for.
+ * @addr: Program counter value.
+ *
+ * Sets the program counter for a CPU.
+ */
+static inline void cpu_set_pc(CPUState *cpu, vaddr addr)
+{
+ CPUClass *cc = CPU_GET_CLASS(cpu);
+
+ cc->set_pc(cpu, addr);
+}
+
/**
* cpu_reset_interrupt:
* @cpu: The CPU to clear the interrupt on.
/* 0x08 currently unused */
#define BP_GDB 0x10
#define BP_CPU 0x20
+#define BP_ANY (BP_GDB | BP_CPU)
#define BP_WATCHPOINT_HIT_READ 0x40
#define BP_WATCHPOINT_HIT_WRITE 0x80
#define BP_WATCHPOINT_HIT (BP_WATCHPOINT_HIT_READ | BP_WATCHPOINT_HIT_WRITE)
void cpu_breakpoint_remove_by_ref(CPUState *cpu, CPUBreakpoint *breakpoint);
void cpu_breakpoint_remove_all(CPUState *cpu, int mask);
+/* Return true if PC matches an installed breakpoint. */
+static inline bool cpu_breakpoint_test(CPUState *cpu, vaddr pc, int mask)
+{
+ CPUBreakpoint *bp;
+
+ if (unlikely(!QTAILQ_EMPTY(&cpu->breakpoints))) {
+ QTAILQ_FOREACH(bp, &cpu->breakpoints, entry) {
+ if (bp->pc == pc && (bp->flags & mask)) {
+ return true;
+ }
+ }
+ }
+ return false;
+}
+
int cpu_watchpoint_insert(CPUState *cpu, vaddr addr, vaddr len,
int flags, CPUWatchpoint **watchpoint);
int cpu_watchpoint_remove(CPUState *cpu, vaddr addr,
void QEMU_NORETURN cpu_abort(CPUState *cpu, const char *fmt, ...)
GCC_FMT_ATTR(2, 3);
+void cpu_exec_exit(CPUState *cpu);
#ifdef CONFIG_SOFTMMU
extern const struct VMStateDescription vmstate_cpu_common;
projects / qemu.git / blobdiff