#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
AHCI_RX_FIS_SZ)
-#define AHCI_IRQ_ON_SG (1 << 31)
+#define AHCI_IRQ_ON_SG (1U << 31)
#define AHCI_CMD_ATAPI (1 << 5)
#define AHCI_CMD_WRITE (1 << 6)
#define AHCI_CMD_PREFETCH (1 << 7)
/* HOST_CTL bits */
#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */
#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */
-#define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */
+#define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */
/* HOST_CAP bits */
#define HOST_CAP_SSC (1 << 14) /* Slumber capable */
#define HOST_CAP_CLO (1 << 24) /* Command List Override support */
#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */
#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
-#define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */
+#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */
/* registers for each SATA port */
#define PORT_LST_ADDR 0x00 /* command list DMA addr */
#define PORT_RESERVED 0x3c /* reserved */
/* PORT_IRQ_{STAT,MASK} bits */
-#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */
+#define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */
#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
-#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */
-#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */
-#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */
-#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */
-#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */
-#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */
-#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */
-#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence
- Status */
-#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */
-#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier
- Status */
-#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */
-#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error
- Status */
-#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */
-#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */
-#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */
-#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */
-#define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */
+#define PORT_CMD_RO_MASK 0x007dffe0 /* Which CMD bits are read only? */
/* ap->flags bits */
#define AHCI_FLAG_NO_NCQ (1 << 24)
#define AHCI_SCR_SCTL_DET 0xf
#define SATA_FIS_TYPE_REGISTER_H2D 0x27
-#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
+#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
+#define SATA_FIS_TYPE_REGISTER_D2H 0x34
+#define SATA_FIS_TYPE_PIO_SETUP 0x5f
+#define SATA_FIS_TYPE_SDB 0xA1
#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f
#define AHCI_CMD_HDR_PRDT_LEN 16
-#define SATA_SIGNATURE_CDROM 0xeb140000
+#define SATA_SIGNATURE_CDROM 0xeb140101
#define SATA_SIGNATURE_DISK 0x00000101
#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
#define AHCI_COMMAND_TABLE_ACMD 0x40
+#define AHCI_PRDT_SIZE_MASK 0x3fffff
+
#define IDE_FEATURE_DMA 1
#define READ_FPDMA_QUEUED 0x60
#define WRITE_FPDMA_QUEUED 0x61
+#define NCQ_NON_DATA 0x63
+#define RECEIVE_FPDMA_QUEUED 0x65
+#define SEND_FPDMA_QUEUED 0x64
+
+#define NCQ_FIS_FUA_MASK 0x80
+#define NCQ_FIS_RARC_MASK 0x01
#define RES_FIS_DSFIS 0x00
#define RES_FIS_PSFIS 0x20
} AHCIPortRegs;
typedef struct AHCICmdHdr {
- uint32_t opts;
+ uint16_t opts;
+ uint16_t prdtl;
uint32_t status;
uint64_t tbl_addr;
uint32_t reserved[4];
typedef struct NCQTransferState {
AHCIDevice *drive;
- BlockDriverAIOCB *aiocb;
+ BlockAIOCB *aiocb;
+ AHCICmdHdr *cmdh;
QEMUSGList sglist;
BlockAcctCookie acct;
- uint16_t sector_count;
+ uint32_t sector_count;
uint64_t lba;
uint8_t tag;
- int slot;
- int used;
+ uint8_t cmd;
+ uint8_t slot;
+ bool used;
+ bool halt;
} NCQTransferState;
struct AHCIDevice {
QEMUBH *check_bh;
uint8_t *lst;
uint8_t *res_fis;
- int dma_status;
- int done_atapi_packet;
- int busy_slot;
- int init_d2h_sent;
- BlockDriverCompletionFunc *dma_cb;
+ bool done_atapi_packet;
+ int32_t busy_slot;
+ bool init_d2h_sent;
AHCICmdHdr *cur_cmd;
NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
};
MemoryRegion idp; /* Index-Data Pair I/O port space */
unsigned idp_offset; /* Offset of index in I/O port space */
uint32_t idp_index; /* Current IDP index */
- int ports;
+ int32_t ports;
qemu_irq irq;
+ AddressSpace *as;
} AHCIState;
typedef struct AHCIPCIState {
- PCIDevice card;
+ /*< private >*/
+ PCIDevice parent_obj;
+ /*< public >*/
+
AHCIState ahci;
} AHCIPCIState;
+#define TYPE_ICH9_AHCI "ich9-ahci"
+
+#define ICH_AHCI(obj) \
+ OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
+
+extern const VMStateDescription vmstate_ahci;
+
+#define VMSTATE_AHCI(_field, _state) { \
+ .name = (stringify(_field)), \
+ .size = sizeof(AHCIState), \
+ .vmsd = &vmstate_ahci, \
+ .flags = VMS_STRUCT, \
+ .offset = vmstate_offset_value(_state, _field, AHCIState), \
+}
+
+/**
+ * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2),
+ * but some fields have been re-mapped and re-purposed, as seen in
+ * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED")
+ *
+ * cmd_fis[3], feature 7:0, becomes sector count 7:0.
+ * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit.
+ * cmd_fis[11], feature 15:8, becomes sector count 15:8.
+ * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0)
+ * cmd_fis[13], count 15:8, becomes the priority value (7:6)
+ * bytes 16-19 become an le32 "auxiliary" field.
+ */
typedef struct NCQFrame {
uint8_t fis_type;
uint8_t c;
uint8_t command;
- uint8_t sector_count_low;
+ uint8_t sector_count_low; /* (feature 7:0) */
uint8_t lba0;
uint8_t lba1;
uint8_t lba2;
- uint8_t fua;
+ uint8_t fua; /* (device 7:0) */
uint8_t lba3;
uint8_t lba4;
uint8_t lba5;
- uint8_t sector_count_high;
- uint8_t tag;
- uint8_t reserved5;
- uint8_t reserved6;
+ uint8_t sector_count_high; /* (feature 15:8) */
+ uint8_t tag; /* (count 0:7) */
+ uint8_t prio; /* (count 15:8) */
+ uint8_t icc;
uint8_t control;
- uint8_t reserved7;
- uint8_t reserved8;
- uint8_t reserved9;
- uint8_t reserved10;
+ uint8_t aux0;
+ uint8_t aux1;
+ uint8_t aux2;
+ uint8_t aux3;
} QEMU_PACKED NCQFrame;
-void ahci_init(AHCIState *s, DeviceState *qdev, int ports);
+typedef struct SDBFIS {
+ uint8_t type;
+ uint8_t flags;
+ uint8_t status;
+ uint8_t error;
+ uint32_t payload;
+} QEMU_PACKED SDBFIS;
+
+void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
void ahci_uninit(AHCIState *s);
void ahci_reset(AHCIState *s);
+void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd);
+
#endif /* HW_IDE_AHCI_H */
projects / qemu.git / blobdiff