@paragraphindent 0
@c %**end of header
+@set qemu_system qemu-system-x86_64
+@set qemu_system_x86 qemu-system-x86_64
+
@ifinfo
@direntry
* QEMU: (qemu-doc). The QEMU Emulator User Documentation.
* Introduction::
* QEMU PC System emulator::
* QEMU System emulator for non PC targets::
-* QEMU Guest Agent::
* QEMU User space emulator::
+* System requirements::
+* Security::
* Implementation notes::
* Deprecated features::
+* Recently removed features::
* Supported build platforms::
* License::
* Index::
QEMU must be told to not have parallel ports to have working GUS.
@example
-qemu-system-i386 dos.img -soundhw gus -parallel none
+@value{qemu_system_x86} dos.img -soundhw gus -parallel none
@end example
Alternatively:
@example
-qemu-system-i386 dos.img -device gus,irq=5
+@value{qemu_system_x86} dos.img -device gus,irq=5
@end example
Or some other unclaimed IRQ.
@section Quick Start
@cindex quick start
-Download and uncompress the linux image (@file{linux.img}) and type:
+Download and uncompress a hard disk image with Linux installed (e.g.
+@file{linux.img}) and type:
@example
-qemu-system-i386 linux.img
+@value{qemu_system} linux.img
@end example
Linux should boot and give you a prompt.
@example
@c man begin SYNOPSIS
-@command{qemu-system-i386} [@var{options}] [@var{disk_image}]
+@command{@value{qemu_system}} [@var{options}] [@var{disk_image}]
@c man end
@end example
Example (without authentication):
@example
-qemu-system-i386 -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
+@value{qemu_system} -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
-cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \
-drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
@end example
Example (CHAP username/password via URL):
@example
-qemu-system-i386 -drive file=iscsi://user%password@@192.0.2.1/iqn.2001-04.com.example/1
+@value{qemu_system} -drive file=iscsi://user%password@@192.0.2.1/iqn.2001-04.com.example/1
@end example
Example (CHAP username/password via environment variables):
@example
LIBISCSI_CHAP_USERNAME="user" \
LIBISCSI_CHAP_PASSWORD="password" \
-qemu-system-i386 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
+@value{qemu_system} -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
@end example
@item NBD
QEMU supports NBD (Network Block Devices) both using TCP protocol as well
-as Unix Domain Sockets.
+as Unix Domain Sockets. With TCP, the default port is 10809.
+
+Syntax for specifying a NBD device using TCP, in preferred URI form:
+``nbd://<server-ip>[:<port>]/[<export>]''
-Syntax for specifying a NBD device using TCP
+Syntax for specifying a NBD device using Unix Domain Sockets; remember
+that '?' is a shell glob character and may need quoting:
+``nbd+unix:///[<export>]?socket=<domain-socket>''
+
+Older syntax that is also recognized:
``nbd:<server-ip>:<port>[:exportname=<export>]''
Syntax for specifying a NBD device using Unix Domain Sockets
Example for TCP
@example
-qemu-system-i386 --drive file=nbd:192.0.2.1:30000
+@value{qemu_system} --drive file=nbd:192.0.2.1:30000
@end example
Example for Unix Domain Sockets
@example
-qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket
+@value{qemu_system} --drive file=nbd:unix:/tmp/nbd-socket
@end example
@item SSH
Examples:
@example
-qemu-system-i386 -drive file=ssh://user@@host/path/to/disk.img
-qemu-system-i386 -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img
+@value{qemu_system} -drive file=ssh://user@@host/path/to/disk.img
+@value{qemu_system} -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img
@end example
Currently authentication must be done using ssh-agent. Other
Example
@example
-qemu-system-i386 --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine
+@value{qemu_system} --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine
@end example
See also @url{https://sheepdog.github.io/sheepdog/}.
Example
@example
URI:
-qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img,
+@value{qemu_system} --drive file=gluster://192.0.2.1/testvol/a.img,
@ file.debug=9,file.logfile=/var/log/qemu-gluster.log
JSON:
-qemu-system-x86_64 'json:@{"driver":"qcow2",
+@value{qemu_system} 'json:@{"driver":"qcow2",
@ "file":@{"driver":"gluster",
@ "volume":"testvol","path":"a.img",
@ "debug":9,"logfile":"/var/log/qemu-gluster.log",
@ "server":[@{"type":"tcp","host":"1.2.3.4","port":24007@},
@ @{"type":"unix","socket":"/var/run/glusterd.socket"@}]@}@}'
-qemu-system-x86_64 -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img,
+@value{qemu_system} -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img,
@ file.debug=9,file.logfile=/var/log/qemu-gluster.log,
@ file.server.0.type=tcp,file.server.0.host=1.2.3.4,file.server.0.port=24007,
@ file.server.1.type=unix,file.server.1.socket=/var/run/glusterd.socket
Example: boot from a remote Fedora 20 live ISO image
@example
-qemu-system-x86_64 --drive media=cdrom,file=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
+@value{qemu_system_x86} --drive media=cdrom,file=https://archives.fedoraproject.org/pub/archive/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
-qemu-system-x86_64 --drive media=cdrom,file.driver=http,file.url=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
+@value{qemu_system_x86} --drive media=cdrom,file.driver=http,file.url=http://archives.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
@end example
Example: boot from a remote Fedora 20 cloud image using a local overlay for
writes, copy-on-read, and a readahead of 64k
@example
-qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"http",, "file.url":"https://dl.fedoraproject.org/pub/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"@}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2
+qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"http",, "file.url":"http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"@}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2
-qemu-system-x86_64 -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on
+@value{qemu_system_x86} -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on
@end example
Example: boot from an image stored on a VMware vSphere server with a self-signed
@example
qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"https",, "file.url":"https://user:password@@vsphere.example.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k",, "file.timeout":10@}' /tmp/test.qcow2
-qemu-system-x86_64 -drive file=/tmp/test.qcow2
+@value{qemu_system_x86} -drive file=/tmp/test.qcow2
@end example
@end table
is:
@example
-qemu-system-x86_64 -device ivshmem-plain,memdev=@var{hostmem}
+@value{qemu_system_x86} -device ivshmem-plain,memdev=@var{hostmem}
@end example
where @var{hostmem} names a host memory backend. For a POSIX shared
ivshmem-server -p @var{pidfile} -S @var{path} -m @var{shm-name} -l @var{shm-size} -n @var{vectors}
# Then start your qemu instances with matching arguments
-qemu-system-x86_64 -device ivshmem-doorbell,vectors=@var{vectors},chardev=@var{id}
+@value{qemu_system_x86} -device ivshmem-doorbell,vectors=@var{vectors},chardev=@var{id}
-chardev socket,path=@var{path},id=@var{id}
@end example
a memory backend that has hugepage support:
@example
-qemu-system-x86_64 -object memory-backend-file,size=1G,mem-path=/dev/hugepages/my-shmem-file,share,id=mb1
+@value{qemu_system_x86} -object memory-backend-file,size=1G,mem-path=/dev/hugepages/my-shmem-file,share,id=mb1
-device ivshmem-plain,memdev=mb1
@end example
The syntax is:
@example
-qemu-system-i386 -kernel arch/i386/boot/bzImage -hda root-2.4.20.img -append "root=/dev/hda"
+@value{qemu_system} -kernel bzImage -hda rootdisk.img -append "root=/dev/hda"
@end example
Use @option{-kernel} to provide the Linux kernel image and
@option{-append} to give the kernel command line arguments. The
@option{-initrd} option can be used to provide an INITRD image.
-When using the direct Linux boot, a disk image for the first hard disk
-@file{hda} is required because its boot sector is used to launch the
-Linux kernel.
-
If you do not need graphical output, you can disable it and redirect
the virtual serial port and the QEMU monitor to the console with the
@option{-nographic} option. The typical command line is:
@example
-qemu-system-i386 -kernel arch/i386/boot/bzImage -hda root-2.4.20.img \
+@value{qemu_system} -kernel bzImage -hda rootdisk.img \
-append "root=/dev/hda console=ttyS0" -nographic
@end example
Bulk-only transport storage device, see
@url{https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/usb-storage.txt,usb-storage.txt}
for details here, too
-@item usb-mtp,x-root=@var{dir}
+@item usb-mtp,rootdir=@var{dir}
Media transfer protocol device, using @var{dir} as root of the file tree
that is presented to the guest.
@item usb-host,hostbus=@var{bus},hostaddr=@var{addr}
specifies a netdev defined with @code{-netdev @dots{},id=@var{id}}.
For instance, user-mode networking can be used with
@example
-qemu-system-i386 [...] -netdev user,id=net0 -device usb-net,netdev=net0
+@value{qemu_system} [...] -netdev user,id=net0 -device usb-net,netdev=net0
@end example
@item usb-ccid
Smartcard reader device
@item usb-audio
USB audio device
-@item usb-bt-dongle
-Bluetooth dongle for the transport layer of HCI. It is connected to HCI
-scatternet 0 by default (corresponds to @code{-bt hci,vlan=0}).
-Note that the syntax for the @code{-device usb-bt-dongle} option is not as
-useful yet as it was with the legacy @code{-usbdevice} option. So to
-configure an USB bluetooth device, you might need to use
-"@code{-usbdevice bt}[:@var{hci-type}]" instead. This configures a
-bluetooth dongle whose type is specified in the same format as with
-the @option{-bt hci} option, @pxref{bt-hcis,,allowed HCI types}. If
-no type is given, the HCI logic corresponds to @code{-bt hci,vlan=0}.
-This USB device implements the USB Transport Layer of HCI. Example
-usage:
-@example
-@command{qemu-system-i386} [...@var{OPTIONS}...] @option{-usbdevice} bt:hci,vlan=3 @option{-bt} device:keyboard,vlan=3
-@end example
@end table
@node host_usb_devices
socket only. For example
@example
-qemu-system-i386 [...OPTIONS...] -vnc unix:/home/joebloggs/.qemu-myvm-vnc
+@value{qemu_system} [...OPTIONS...] -vnc unix:/home/joebloggs/.qemu-myvm-vnc
@end example
This ensures that only users on local box with read/write access to that
set the password all clients will be rejected.
@example
-qemu-system-i386 [...OPTIONS...] -vnc :1,password -monitor stdio
+@value{qemu_system} [...OPTIONS...] -vnc :1,password -monitor stdio
(qemu) change vnc password
Password: ********
(qemu)
client to connect, and provides an encrypted session.
@example
-qemu-system-i386 [...OPTIONS...] \
+@value{qemu_system} [...OPTIONS...] \
-object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server,verify-peer=no \
-vnc :1,tls-creds=tls0 -monitor stdio
@end example
instead.
@example
-qemu-system-i386 [...OPTIONS...] \
+@value{qemu_system} [...OPTIONS...] \
-object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server,verify-peer=yes \
-vnc :1,tls-creds=tls0 -monitor stdio
@end example
to provide two layers of authentication for clients.
@example
-qemu-system-i386 [...OPTIONS...] \
+@value{qemu_system} [...OPTIONS...] \
-object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server,verify-peer=yes \
-vnc :1,tls-creds=tls0,password -monitor stdio
(qemu) change vnc password
then QEMU can be launched with:
@example
-qemu-system-i386 [...OPTIONS...] -vnc :1,sasl -monitor stdio
+@value{qemu_system} [...OPTIONS...] -vnc :1,sasl -monitor stdio
@end example
@node vnc_sec_certificate_sasl
with the aforementioned TLS + x509 options:
@example
-qemu-system-i386 [...OPTIONS...] \
+@value{qemu_system} [...OPTIONS...] \
-object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server,verify-peer=yes \
-vnc :1,tls-creds=tls0,sasl -monitor stdio
@end example
enabled
@example
-$QEMU -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server
+@value{qemu_system} -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server
@end example
while to load client credentials use
@example
-$QEMU -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=client
+@value{qemu_system} -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=client
@end example
Network services which support TLS will all have a @code{tls-creds}
example with VNC:
@example
-$QEMU -vnc 0.0.0.0:0,tls-creds=tls0
+@value{qemu_system} -vnc 0.0.0.0:0,tls-creds=tls0
@end example
@node tls_psk
In order to use gdb, launch QEMU with the '-s' option. It will wait for a
gdb connection:
@example
-qemu-system-i386 -s -kernel arch/i386/boot/bzImage -hda root-2.4.20.img \
- -append "root=/dev/hda"
+@value{qemu_system} -s -kernel bzImage -hda rootdisk.img -append "root=/dev/hda"
Connected to host network interface: tun0
Waiting gdb connection on port 1234
@end example
@section MIPS System emulator
@cindex system emulation (MIPS)
+@menu
+* nanoMIPS System emulator ::
+@end menu
+
Four executables cover simulation of 32 and 64-bit MIPS systems in
both endian options, @file{qemu-system-mips}, @file{qemu-system-mipsel}
@file{qemu-system-mips64} and @file{qemu-system-mips64el}.
Cirrus (default) or any other PCI VGA graphics card
@end itemize
+The Boston board emulation supports the following devices:
+
+@itemize @minus
+@item
+Xilinx FPGA, which includes a PCIe root port and an UART
+@item
+Intel EG20T PCH connects the I/O peripherals, but only the SATA bus is emulated
+@end itemize
+
The ACER Pica emulation supports:
@itemize @minus
IDE controller
@end itemize
+The MIPS Magnum R4000 emulation supports:
+
+@itemize @minus
+@item
+MIPS R4000 CPU
+@item
+PC-style IRQ controller
+@item
+PC Keyboard
+@item
+SCSI controller
+@item
+G364 framebuffer
+@end itemize
+
+The Fulong 2E emulation supports:
+
+@itemize @minus
+@item
+Loongson 2E CPU
+@item
+Bonito64 system controller as North Bridge
+@item
+VT82C686 chipset as South Bridge
+@item
+RTL8139D as a network card chipset
+@end itemize
+
The mipssim pseudo board emulation provides an environment similar
to what the proprietary MIPS emulator uses for running Linux.
It supports:
MIPSnet network emulation
@end itemize
-The MIPS Magnum R4000 emulation supports:
+@node nanoMIPS System emulator
+@subsection nanoMIPS System emulator
+@cindex system emulation (nanoMIPS)
+
+Executable @file{qemu-system-mipsel} also covers simulation of
+32-bit nanoMIPS system in little endian mode:
@itemize @minus
@item
-MIPS R4000 CPU
-@item
-PC-style IRQ controller
-@item
-PC Keyboard
-@item
-SCSI controller
-@item
-G364 framebuffer
+nanoMIPS I7200 CPU
@end itemize
+Example of @file{qemu-system-mipsel} usage for nanoMIPS is shown below:
+
+Download @code{<disk_image_file>} from @url{https://mipsdistros.mips.com/LinuxDistro/nanomips/buildroot/index.html}.
+
+Download @code{<kernel_image_file>} from @url{https://mipsdistros.mips.com/LinuxDistro/nanomips/kernels/v4.15.18-432-gb2eb9a8b07a1-20180627102142/index.html}.
+
+Start system emulation of Malta board with nanoMIPS I7200 CPU:
+@example
+qemu-system-mipsel -cpu I7200 -kernel @code{<kernel_image_file>} \
+ -M malta -serial stdio -m @code{<memory_size>} -hda @code{<disk_image_file>} \
+ -append "mem=256m@@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda"
+@end example
+
@node ARM System emulator
@section ARM System emulator
@item
Three OMAP on-chip UARTs and on-chip STI debugging console
@item
-A Bluetooth(R) transceiver and HCI connected to an UART
-@item
Mentor Graphics "Inventra" dual-role USB controller embedded in a TI
TUSB6010 chip - only USB host mode is supported
@item
@c man end
-@node QEMU Guest Agent
-@chapter QEMU Guest Agent invocation
-
-@include qemu-ga.texi
-
@node QEMU User space emulator
@chapter QEMU User space emulator
Run the emulation in single step mode.
@end table
+@node System requirements
+@chapter System requirements
+
+@section KVM kernel module
+
+On x86_64 hosts, the default set of CPU features enabled by the KVM accelerator
+require the host to be running Linux v4.5 or newer.
+
+The OpteronG[345] CPU models require KVM support for RDTSCP, which was
+added with Linux 4.5 which is supported by the major distros. And even
+if RHEL7 has kernel 3.10, KVM there has the required functionality there
+to make it close to a 4.5 or newer kernel.
+
+@include docs/security.texi
@include qemu-tech.texi
projects / qemu.git / blobdiff