* THE SOFTWARE.
*/
#include "qemu/osdep.h"
-#include "qemu-common.h"
#include "trace.h"
#include "block/block_int.h"
#include "block/blockjob.h"
#include "qemu/timer.h"
#include "qapi-event.h"
#include "block/throttle-groups.h"
+#include "qemu/cutils.h"
+#include "qemu/id.h"
#ifdef CONFIG_BSD
#include <sys/ioctl.h>
return 0;
}
+bool bdrv_uses_whitelist(void)
+{
+ return use_bdrv_whitelist;
+}
+
typedef struct CreateCo {
BlockDriver *drv;
char *filename;
*
* Return 0 on success, -1 if the cache mode was invalid.
*/
-int bdrv_parse_cache_flags(const char *mode, int *flags)
+int bdrv_parse_cache_mode(const char *mode, int *flags, bool *writethrough)
{
*flags &= ~BDRV_O_CACHE_MASK;
if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
- *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
+ *writethrough = false;
+ *flags |= BDRV_O_NOCACHE;
} else if (!strcmp(mode, "directsync")) {
+ *writethrough = true;
*flags |= BDRV_O_NOCACHE;
} else if (!strcmp(mode, "writeback")) {
- *flags |= BDRV_O_CACHE_WB;
+ *writethrough = false;
} else if (!strcmp(mode, "unsafe")) {
- *flags |= BDRV_O_CACHE_WB;
+ *writethrough = false;
*flags |= BDRV_O_NO_FLUSH;
} else if (!strcmp(mode, "writethrough")) {
- /* this is the default */
+ *writethrough = true;
} else {
return -1;
}
*child_flags = (parent_flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
/* For temporary files, unconditional cache=unsafe is fine */
- qdict_set_default_str(child_options, BDRV_OPT_CACHE_WB, "on");
qdict_set_default_str(child_options, BDRV_OPT_CACHE_DIRECT, "off");
qdict_set_default_str(child_options, BDRV_OPT_CACHE_NO_FLUSH, "on");
}
/* Our block drivers take care to send flushes and respect unmap policy,
* so we can default to enable both on lower layers regardless of the
* corresponding parent options. */
- qdict_set_default_str(child_options, BDRV_OPT_CACHE_WB, "on");
flags |= BDRV_O_UNMAP;
/* Clear flags that only apply to the top layer */
- flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
+ flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ |
+ BDRV_O_NO_IO);
*child_flags = flags;
}
child_file.inherit_options(child_flags, child_options,
parent_flags, parent_options);
- *child_flags &= ~BDRV_O_PROTOCOL;
+ *child_flags &= ~(BDRV_O_PROTOCOL | BDRV_O_NO_IO);
}
const BdrvChildRole child_format = {
{
int flags = parent_flags;
- /* The cache mode is inherited unmodified for backing files */
- qdict_copy_default(child_options, parent_options, BDRV_OPT_CACHE_WB);
+ /* The cache mode is inherited unmodified for backing files; except WCE,
+ * which is only applied on the top level (BlockBackend) */
qdict_copy_default(child_options, parent_options, BDRV_OPT_CACHE_DIRECT);
qdict_copy_default(child_options, parent_options, BDRV_OPT_CACHE_NO_FLUSH);
static int bdrv_open_flags(BlockDriverState *bs, int flags)
{
- int open_flags = flags | BDRV_O_CACHE_WB;
+ int open_flags = flags;
/*
* Clear flags that are internal to the block layer before opening the
{
*flags &= ~BDRV_O_CACHE_MASK;
- assert(qemu_opt_find(opts, BDRV_OPT_CACHE_WB));
- if (qemu_opt_get_bool(opts, BDRV_OPT_CACHE_WB, false)) {
- *flags |= BDRV_O_CACHE_WB;
- }
-
assert(qemu_opt_find(opts, BDRV_OPT_CACHE_NO_FLUSH));
if (qemu_opt_get_bool(opts, BDRV_OPT_CACHE_NO_FLUSH, false)) {
*flags |= BDRV_O_NO_FLUSH;
static void update_options_from_flags(QDict *options, int flags)
{
- if (!qdict_haskey(options, BDRV_OPT_CACHE_WB)) {
- qdict_put(options, BDRV_OPT_CACHE_WB,
- qbool_from_bool(flags & BDRV_O_CACHE_WB));
- }
if (!qdict_haskey(options, BDRV_OPT_CACHE_DIRECT)) {
qdict_put(options, BDRV_OPT_CACHE_DIRECT,
qbool_from_bool(flags & BDRV_O_NOCACHE));
.type = QEMU_OPT_STRING,
.help = "Block driver to use for the node",
},
- {
- .name = BDRV_OPT_CACHE_WB,
- .type = QEMU_OPT_BOOL,
- .help = "Enable writeback mode",
- },
{
.name = BDRV_OPT_CACHE_DIRECT,
.type = QEMU_OPT_BOOL,
/* Apply cache mode options */
update_flags_from_options(&bs->open_flags, opts);
- bdrv_set_enable_write_cache(bs, bs->open_flags & BDRV_O_CACHE_WB);
/* Open the image, either directly or using a protocol */
open_flags = bdrv_open_flags(bs, bs->open_flags);
goto free_and_fail;
}
- if (bs->encrypted) {
- error_report("Encrypted images are deprecated");
- error_printf("Support for them will be removed in a future release.\n"
- "You can use 'qemu-img convert' to convert your image"
- " to an unencrypted one.\n");
- }
-
ret = refresh_total_sectors(bs, bs->total_sectors);
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not refresh total sector count");
if (!bs) {
return -ENODEV;
}
+
+ if (bs->throttle_state) {
+ error_setg(errp, "Cannot reference an existing block device for "
+ "which I/O throttling is enabled");
+ return -EINVAL;
+ }
+
bdrv_ref(bs);
*pbs = bs;
return 0;
update_flags_from_options(&reopen_state->flags, opts);
- /* If a guest device is attached, it owns WCE */
- if (reopen_state->bs->blk && blk_get_attached_dev(reopen_state->bs->blk)) {
- bool old_wce = bdrv_enable_write_cache(reopen_state->bs);
- bool new_wce = (reopen_state->flags & BDRV_O_CACHE_WB);
- if (old_wce != new_wce) {
- error_setg(errp, "Cannot change cache.writeback: Device attached");
- ret = -EINVAL;
- goto error;
- }
- }
-
/* node-name and driver must be unchanged. Put them back into the QDict, so
* that they are checked at the end of this function. */
value = qemu_opt_get(opts, "node-name");
reopen_state->bs->explicit_options = reopen_state->explicit_options;
reopen_state->bs->open_flags = reopen_state->flags;
- reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
- BDRV_O_CACHE_WB);
reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
bdrv_refresh_limits(reopen_state->bs, NULL);
}
}
-/* make a BlockDriverState anonymous by removing from graph_bdrv_state list.
- * Also, NULL terminate the device_name to prevent double remove */
-void bdrv_make_anon(BlockDriverState *bs)
-{
- if (bs->node_name[0] != '\0') {
- QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
- }
- bs->node_name[0] = '\0';
-}
-
/* Fields that need to stay with the top-level BDS */
static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
BlockDriverState *bs_src)
{
/* move some fields that need to stay attached to the device */
-
- /* dev info */
- bs_dest->copy_on_read = bs_src->copy_on_read;
-
- bs_dest->enable_write_cache = bs_src->enable_write_cache;
-
- /* dirty bitmap */
- bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
}
static void change_parent_backing_link(BlockDriverState *from,
bdrv_close(bs);
/* remove from list, if necessary */
- bdrv_make_anon(bs);
-
+ if (bs->node_name[0] != '\0') {
+ QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
+ }
QTAILQ_REMOVE(&all_bdrv_states, bs, bs_list);
g_free(bs);
return bs->sg;
}
-int bdrv_enable_write_cache(BlockDriverState *bs)
-{
- return bs->enable_write_cache;
-}
-
-void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
-{
- bs->enable_write_cache = wce;
-
- /* so a reopen() will preserve wce */
- if (wce) {
- bs->open_flags |= BDRV_O_CACHE_WB;
- } else {
- bs->open_flags &= ~BDRV_O_CACHE_WB;
- }
-}
-
int bdrv_is_encrypted(BlockDriverState *bs)
{
if (bs->backing && bs->backing->bs->encrypted) {
list = NULL;
QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
- BlockDeviceInfo *info = bdrv_block_device_info(bs, errp);
+ BlockDeviceInfo *info = bdrv_block_device_info(NULL, bs, errp);
if (!info) {
qapi_free_BlockDeviceInfoList(list);
return NULL;
}
/* backing files always opened read-only */
- back_flags =
- flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
+ back_flags = flags;
+ back_flags &= ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
if (backing_fmt) {
backing_options = qdict_new();
projects / qemu.git / blobdiff