target-arm/arm-powerctl: wake up sleeping CPUs

[qemu.git] / trace-events

diff --git a/trace-events b/trace-events
index 476705996be9e23e3fb7506d87bc287d56670671..8ecded51506d3bd3dd3fcab565330df0cffdfb73 100644 (file)
--- a/trace-events
+++ b/trace-events
@@ -37,10 +37,6 @@ cpu_out(unsigned int addr, char size, unsigned int val) "addr %#x(%c) value %u"
 # balloon.c
 # Since requests are raised via monitor, not many tracepoints are needed.
 balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu"
-virtio_balloon_handle_output(const char *name, uint64_t gpa) "section name: %s gpa: %"PRIx64
-virtio_balloon_get_config(uint32_t num_pages, uint32_t actual) "num_pages: %d actual: %d"
-virtio_balloon_set_config(uint32_t actual, uint32_t oldactual) "actual: %d oldactual: %d"
-virtio_balloon_to_target(uint64_t target, uint32_t num_pages) "balloon target: %"PRIx64" num_pages: %d"
 
 # vl.c
 vm_state_notify(int running, int reason) "running %d reason %d"
@@ -60,6 +56,7 @@ spice_vmc_event(int event) "spice vmc event %d"
 # xen-hvm.c
 xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx"
 xen_client_set_memory(uint64_t start_addr, unsigned long size, bool log_dirty) "%#"PRIx64" size %#lx, log_dirty %i"
+xen_default_ioreq_server(void) ""
 xen_ioreq_server_create(uint32_t id) "id: %u"
 xen_ioreq_server_destroy(uint32_t id) "id: %u"
 xen_ioreq_server_state(uint32_t id, bool enable) "id: %u: enable: %i"
@@ -82,22 +79,8 @@ xen_map_cache(uint64_t phys_addr) "want %#"PRIx64
 xen_remap_bucket(uint64_t index) "index %#"PRIx64
 xen_map_cache_return(void* ptr) "%p"
 
-# qemu-coroutine.c
-qemu_coroutine_enter(void *from, void *to, void *opaque) "from %p to %p opaque %p"
-qemu_coroutine_yield(void *from, void *to) "from %p to %p"
-qemu_coroutine_terminate(void *co) "self %p"
-
-# qemu-coroutine-lock.c
-qemu_co_queue_run_restart(void *co) "co %p"
-qemu_co_queue_next(void *nxt) "next %p"
-qemu_co_mutex_lock_entry(void *mutex, void *self) "mutex %p self %p"
-qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p"
-qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p"
-qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p"
-
 # monitor.c
 handle_qmp_command(void *mon, const char *cmd_name) "mon %p cmd_name \"%s\""
-monitor_protocol_emitter(void *mon) "mon %p"
 monitor_protocol_event_handler(uint32_t event, void *qdict) "event=%d data=%p"
 monitor_protocol_event_emit(uint32_t event, void *data) "event=%d data=%p"
 monitor_protocol_event_queue(uint32_t event, void *qdict, uint64_t rate) "event=%d data=%p rate=%" PRId64
@@ -118,6 +101,9 @@ kvm_run_exit(int cpu_index, uint32_t reason) "cpu_index %d, reason %d"
 kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
 kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
 kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
+kvm_irqchip_commit_routes(void) ""
+kvm_irqchip_add_msi_route(int virq) "Adding MSI route virq=%d"
+kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
 
 # TCG related tracing (mostly disabled by default)
 # cpu-exec.c
@@ -138,6 +124,21 @@ memory_region_tb_write(int cpu_index, uint64_t addr, uint64_t value, unsigned si
 
 ### Guest events, keep at bottom
 
+
+## vCPU
+
+# Hot-plug a new virtual (guest) CPU
+#
+# Mode: user, softmmu
+# Targets: all
+vcpu guest_cpu_enter(void)
+
+# Reset the state of a virtual (guest) CPU
+#
+# Mode: user, softmmu
+# Targets: all
+vcpu guest_cpu_reset(void)
+
 # @vaddr: Access' virtual address.
 # @info : Access' information (see below).
 #
@@ -154,6 +155,7 @@ memory_region_tb_write(int cpu_index, uint64_t addr, uint64_t value, unsigned si
 #     bool    store      : 1; /* wheter it's a store operation */
 # };
 #
+# Mode: user, softmmu
 # Targets: TCG(all)
 disable vcpu tcg guest_mem_before(TCGv vaddr, uint8_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
 
@@ -162,6 +164,7 @@ disable vcpu tcg guest_mem_before(TCGv vaddr, uint8_t info) "info=%d", "vaddr=0x
 #
 # Start executing a guest system call in syscall emulation mode.
 #
+# Mode: user
 # Targets: TCG(all)
 disable vcpu guest_user_syscall(uint64_t num, uint64_t arg1, uint64_t arg2, uint64_t arg3, uint64_t arg4, uint64_t arg5, uint64_t arg6, uint64_t arg7, uint64_t arg8) "num=0x%016"PRIx64" arg1=0x%016"PRIx64" arg2=0x%016"PRIx64" arg3=0x%016"PRIx64" arg4=0x%016"PRIx64" arg5=0x%016"PRIx64" arg6=0x%016"PRIx64" arg7=0x%016"PRIx64" arg8=0x%016"PRIx64
 
@@ -170,5 +173,6 @@ disable vcpu guest_user_syscall(uint64_t num, uint64_t arg1, uint64_t arg2, uint
 #
 # Finish executing a guest system call in syscall emulation mode.
 #
+# Mode: user
 # Targets: TCG(all)
 disable vcpu guest_user_syscall_ret(uint64_t num, uint64_t ret) "num=0x%016"PRIx64" ret=0x%016"PRIx64