Merge remote-tracking branch 'remotes/armbru/tags/pull-block-2017-02-21' into staging

[qemu.git] / hw / block / m25p80.c

diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index 4c5f8c3590aaad8bdc2854e5935ea47115b09bb5..2d6eb46a040cccdbe7fe8f278e2392ea49586832 100644 (file)
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -74,6 +74,12 @@ typedef struct FlashPartInfo {
     uint32_t n_sectors;
     uint32_t page_size;
     uint16_t flags;
+    /*
+     * Big sized spi nor are often stacked devices, thus sometime
+     * replace chip erase with die erase.
+     * This field inform how many die is in the chip.
+     */
+    uint8_t die_cnt;
 } FlashPartInfo;
 
 /* adapted from linux */
@@ -91,7 +97,8 @@ typedef struct FlashPartInfo {
     .sector_size = (_sector_size),\
     .n_sectors = (_n_sectors),\
     .page_size = 256,\
-    .flags = (_flags),
+    .flags = (_flags),\
+    .die_cnt = 0
 
 #define INFO6(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags)\
     .part_name = _part_name,\
@@ -108,6 +115,24 @@ typedef struct FlashPartInfo {
     .n_sectors = (_n_sectors),\
     .page_size = 256,\
     .flags = (_flags),\
+    .die_cnt = 0
+
+#define INFO_STACKED(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors,\
+                    _flags, _die_cnt)\
+    .part_name = _part_name,\
+    .id = {\
+        ((_jedec_id) >> 16) & 0xff,\
+        ((_jedec_id) >> 8) & 0xff,\
+        (_jedec_id) & 0xff,\
+        ((_ext_id) >> 8) & 0xff,\
+        (_ext_id) & 0xff,\
+          },\
+    .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),\
+    .sector_size = (_sector_size),\
+    .n_sectors = (_n_sectors),\
+    .page_size = 256,\
+    .flags = (_flags),\
+    .die_cnt = _die_cnt
 
 #define JEDEC_NUMONYX 0x20
 #define JEDEC_WINBOND 0xEF
@@ -122,7 +147,7 @@ typedef struct FlashPartInfo {
 #define CFG_DUMMY_CLK_LEN 4
 #define NVCFG_DUMMY_CLK_POS 12
 #define VCFG_DUMMY_CLK_POS 4
-#define EVCFG_OUT_DRIVER_STRENGHT_DEF 7
+#define EVCFG_OUT_DRIVER_STRENGTH_DEF 7
 #define EVCFG_VPP_ACCELERATOR (1 << 3)
 #define EVCFG_RESET_HOLD_ENABLED (1 << 4)
 #define NVCFG_DUAL_IO_MASK (1 << 2)
@@ -218,8 +243,10 @@ static const FlashPartInfo known_devices[] = {
     { INFO("n25q128",     0x20ba18,      0,  64 << 10, 256, 0) },
     { INFO("n25q256a",    0x20ba19,      0,  64 << 10, 512, ER_4K) },
     { INFO("n25q512a",    0x20ba20,      0,  64 << 10, 1024, ER_4K) },
-    { INFO("mt25ql01g",   0x20ba21,      0,  64 << 10, 2048, ER_4K) },
-    { INFO("mt25qu01g",   0x20bb21,      0,  64 << 10, 2048, ER_4K) },
+    { INFO_STACKED("n25q00",    0x20ba21, 0x1000, 64 << 10, 2048, ER_4K, 4) },
+    { INFO_STACKED("n25q00a",   0x20bb21, 0x1000, 64 << 10, 2048, ER_4K, 4) },
+    { INFO_STACKED("mt25ql01g", 0x20ba21, 0x1040, 64 << 10, 2048, ER_4K, 2) },
+    { INFO_STACKED("mt25qu01g", 0x20bb21, 0x1040, 64 << 10, 2048, ER_4K, 2) },
 
     /* Spansion -- single (large) sector size only, at least
      * for the chips listed here (without boot sectors).
@@ -327,6 +354,7 @@ typedef enum {
     PP4_4 = 0x3e,
     DPP = 0xa2,
     QPP = 0x32,
+    QPP_4 = 0x34,
 
     ERASE_4K = 0x20,
     ERASE4_4K = 0x21,
@@ -359,6 +387,8 @@ typedef enum {
 
     REVCR = 0x65,
     WEVCR = 0x61,
+
+    DIE_ERASE = 0xC4,
 } FlashCMD;
 
 typedef enum {
@@ -516,6 +546,16 @@ static void flash_erase(Flash *s, int offset, FlashCMD cmd)
     case BULK_ERASE:
         len = s->size;
         break;
+    case DIE_ERASE:
+        if (s->pi->die_cnt) {
+            len = s->size / s->pi->die_cnt;
+            offset = offset & (~(len - 1));
+        } else {
+            qemu_log_mask(LOG_GUEST_ERROR, "M25P80: die erase is not supported"
+                          " by device\n");
+            return;
+        }
+        break;
     default:
         abort();
     }
@@ -577,6 +617,7 @@ static inline int get_addr_length(Flash *s)
    switch (s->cmd_in_progress) {
    case PP4:
    case PP4_4:
+   case QPP_4:
    case READ4:
    case QIOR4:
    case ERASE4_4K:
@@ -610,6 +651,7 @@ static void complete_collecting_data(Flash *s)
     switch (s->cmd_in_progress) {
     case DPP:
     case QPP:
+    case QPP_4:
     case PP:
     case PP4:
     case PP4_4:
@@ -635,6 +677,7 @@ static void complete_collecting_data(Flash *s)
     case ERASE4_32K:
     case ERASE_SECTOR:
     case ERASE4_SECTOR:
+    case DIE_ERASE:
         flash_erase(s, s->cur_addr, s->cmd_in_progress);
         break;
     case WRSR:
@@ -704,7 +747,7 @@ static void reset_memory(Flash *s)
                             );
 
         s->enh_volatile_cfg = 0;
-        s->enh_volatile_cfg |= EVCFG_OUT_DRIVER_STRENGHT_DEF;
+        s->enh_volatile_cfg |= EVCFG_OUT_DRIVER_STRENGTH_DEF;
         s->enh_volatile_cfg |= EVCFG_VPP_ACCELERATOR;
         s->enh_volatile_cfg |= EVCFG_RESET_HOLD_ENABLED;
         if (s->nonvolatile_cfg & NVCFG_DUAL_IO_MASK) {
@@ -877,9 +920,11 @@ static void decode_new_cmd(Flash *s, uint32_t value)
     case READ4:
     case DPP:
     case QPP:
+    case QPP_4:
     case PP:
     case PP4:
     case PP4_4:
+    case DIE_ERASE:
         s->needed_bytes = get_addr_length(s);
         s->pos = 0;
         s->len = 0;