*/
#include <qemu-common.h>
-#include <sysemu.h>
+#include "qemu-error.h"
+#include "trace.h"
+#include "blockdev.h"
#include "virtio-blk.h"
-#include "block_int.h"
#ifdef __linux__
# include <scsi/sg.h>
#endif
BlockDriverState *bs;
VirtQueue *vq;
void *rq;
- char serial_str[BLOCK_SERIAL_STRLEN + 1];
QEMUBH *bh;
- size_t config_size;
+ BlockConf *conf;
+ char *serial;
+ unsigned short sector_mask;
+ DeviceState *qdev;
} VirtIOBlock;
static VirtIOBlock *to_virtio_blk(VirtIODevice *vdev)
return (VirtIOBlock *)vdev;
}
-/* store identify data in little endian format
- */
-static inline void put_le16(uint16_t *p, unsigned int v)
-{
- *p = cpu_to_le16(v);
-}
-
-/* copy to *dst from *src, nul pad dst tail as needed to len bytes
- */
-static inline void padstr(char *dst, const char *src, int len)
-{
- while (len--)
- *dst++ = *src ? *src++ : '\0';
-}
-
-/* setup simulated identify data as appropriate for virtio block device
- *
- * ref: AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
- */
-static inline void virtio_identify_template(struct virtio_blk_config *bc)
-{
- uint16_t *p = &bc->identify[0];
- uint64_t lba_sectors = bc->capacity;
-
- memset(p, 0, sizeof(bc->identify));
- put_le16(p + 0, 0x0); /* ATA device */
- padstr((char *)(p + 23), QEMU_VERSION, 8); /* firmware revision */
- padstr((char *)(p + 27), "QEMU VIRT_BLK", 40); /* model# */
- put_le16(p + 47, 0x80ff); /* max xfer 255 sectors */
- put_le16(p + 49, 0x0b00); /* support IORDY/LBA/DMA */
- put_le16(p + 59, 0x1ff); /* cur xfer 255 sectors */
- put_le16(p + 80, 0x1f0); /* support ATA8/7/6/5/4 */
- put_le16(p + 81, 0x16);
- put_le16(p + 82, 0x400);
- put_le16(p + 83, 0x400);
- put_le16(p + 100, lba_sectors);
- put_le16(p + 101, lba_sectors >> 16);
- put_le16(p + 102, lba_sectors >> 32);
- put_le16(p + 103, lba_sectors >> 48);
-}
-
typedef struct VirtIOBlockReq
{
VirtIOBlock *dev;
{
VirtIOBlock *s = req->dev;
- req->in->status = status;
+ trace_virtio_blk_req_complete(req, status);
+
+ stb_p(&req->in->status, status);
virtqueue_push(s->vq, &req->elem, req->qiov.size + sizeof(*req->in));
virtio_notify(&s->vdev, s->vq);
static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
int is_read)
{
- BlockInterfaceErrorAction action =
- drive_get_on_error(req->dev->bs, is_read);
+ BlockErrorAction action = bdrv_get_on_error(req->dev->bs, is_read);
VirtIOBlock *s = req->dev;
- if (action == BLOCK_ERR_IGNORE)
+ if (action == BLOCK_ERR_IGNORE) {
+ bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
return 0;
+ }
if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
|| action == BLOCK_ERR_STOP_ANY) {
req->next = s->rq;
s->rq = req;
- vm_stop(0);
+ bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
+ vm_stop(VMSTOP_DISKFULL);
} else {
virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
+ bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
}
return 1;
{
VirtIOBlockReq *req = opaque;
+ trace_virtio_blk_rw_complete(req, ret);
+
if (ret) {
- int is_read = !(req->out->type & VIRTIO_BLK_T_OUT);
+ int is_read = !(ldl_p(&req->out->type) & VIRTIO_BLK_T_OUT);
if (virtio_blk_handle_rw_error(req, -ret, is_read))
return;
}
{
VirtIOBlockReq *req = opaque;
- virtio_blk_req_complete(req, ret ? VIRTIO_BLK_S_IOERR : VIRTIO_BLK_S_OK);
+ if (ret) {
+ if (virtio_blk_handle_rw_error(req, -ret, 0)) {
+ return;
+ }
+ }
+
+ virtio_blk_req_complete(req, VIRTIO_BLK_S_OK);
}
static VirtIOBlockReq *virtio_blk_alloc_request(VirtIOBlock *s)
{
- VirtIOBlockReq *req = qemu_mallocz(sizeof(*req));
+ VirtIOBlockReq *req = qemu_malloc(sizeof(*req));
req->dev = s;
+ req->qiov.size = 0;
+ req->next = NULL;
return req;
}
static void virtio_blk_handle_scsi(VirtIOBlockReq *req)
{
struct sg_io_hdr hdr;
- int ret, size = 0;
+ int ret;
int status;
int i;
* before the regular inhdr.
*/
req->scsi = (void *)req->elem.in_sg[req->elem.in_num - 2].iov_base;
- size = sizeof(*req->in) + sizeof(*req->scsi);
memset(&hdr, 0, sizeof(struct sg_io_hdr));
hdr.interface_id = 'S';
hdr.dxfer_len += req->elem.in_sg[i].iov_len;
hdr.dxferp = req->elem.in_sg;
- size += hdr.dxfer_len;
} else {
/*
* Some SCSI commands don't actually transfer any data.
hdr.sbp = req->elem.in_sg[req->elem.in_num - 3].iov_base;
hdr.mx_sb_len = req->elem.in_sg[req->elem.in_num - 3].iov_len;
- size += hdr.mx_sb_len;
ret = bdrv_ioctl(req->dev->bs, SG_IO, &hdr);
if (ret) {
status = VIRTIO_BLK_S_OK;
}
- req->scsi->errors = hdr.status;
- req->scsi->residual = hdr.resid;
- req->scsi->sense_len = hdr.sb_len_wr;
- req->scsi->data_len = hdr.dxfer_len;
+ stl_p(&req->scsi->errors, hdr.status);
+ stl_p(&req->scsi->residual, hdr.resid);
+ stl_p(&req->scsi->sense_len, hdr.sb_len_wr);
+ stl_p(&req->scsi->data_len, hdr.dxfer_len);
virtio_blk_req_complete(req, status);
}
}
#endif /* __linux__ */
-static void do_multiwrite(BlockDriverState *bs, BlockRequest *blkreq,
- int num_writes)
+typedef struct MultiReqBuffer {
+ BlockRequest blkreq[32];
+ unsigned int num_writes;
+} MultiReqBuffer;
+
+static void virtio_submit_multiwrite(BlockDriverState *bs, MultiReqBuffer *mrb)
{
int i, ret;
- ret = bdrv_aio_multiwrite(bs, blkreq, num_writes);
+ if (!mrb->num_writes) {
+ return;
+ }
+
+ ret = bdrv_aio_multiwrite(bs, mrb->blkreq, mrb->num_writes);
if (ret != 0) {
- for (i = 0; i < num_writes; i++) {
- if (blkreq[i].error) {
- virtio_blk_req_complete(blkreq[i].opaque, VIRTIO_BLK_S_IOERR);
+ for (i = 0; i < mrb->num_writes; i++) {
+ if (mrb->blkreq[i].error) {
+ virtio_blk_rw_complete(mrb->blkreq[i].opaque, -EIO);
}
}
}
+
+ mrb->num_writes = 0;
}
-static void virtio_blk_handle_flush(VirtIOBlockReq *req)
+static void virtio_blk_handle_flush(VirtIOBlockReq *req, MultiReqBuffer *mrb)
{
BlockDriverAIOCB *acb;
+ /*
+ * Make sure all outstanding writes are posted to the backing device.
+ */
+ virtio_submit_multiwrite(req->dev->bs, mrb);
+
acb = bdrv_aio_flush(req->dev->bs, virtio_blk_flush_complete, req);
if (!acb) {
- virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
+ virtio_blk_flush_complete(req, -EIO);
}
}
-static void virtio_blk_handle_write(BlockRequest *blkreq, int *num_writes,
- VirtIOBlockReq *req, BlockDriverState **old_bs)
+static void virtio_blk_handle_write(VirtIOBlockReq *req, MultiReqBuffer *mrb)
{
- if (req->dev->bs != *old_bs || *num_writes == 32) {
- if (*old_bs != NULL) {
- do_multiwrite(*old_bs, blkreq, *num_writes);
- }
- *num_writes = 0;
- *old_bs = req->dev->bs;
+ BlockRequest *blkreq;
+ uint64_t sector;
+
+ sector = ldq_p(&req->out->sector);
+
+ trace_virtio_blk_handle_write(req, sector, req->qiov.size / 512);
+
+ if (sector & req->dev->sector_mask) {
+ virtio_blk_rw_complete(req, -EIO);
+ return;
+ }
+ if (req->qiov.size % req->dev->conf->logical_block_size) {
+ virtio_blk_rw_complete(req, -EIO);
+ return;
}
- blkreq[*num_writes].sector = req->out->sector;
- blkreq[*num_writes].nb_sectors = req->qiov.size / 512;
- blkreq[*num_writes].qiov = &req->qiov;
- blkreq[*num_writes].cb = virtio_blk_rw_complete;
- blkreq[*num_writes].opaque = req;
- blkreq[*num_writes].error = 0;
+ if (mrb->num_writes == 32) {
+ virtio_submit_multiwrite(req->dev->bs, mrb);
+ }
- (*num_writes)++;
+ blkreq = &mrb->blkreq[mrb->num_writes];
+ blkreq->sector = sector;
+ blkreq->nb_sectors = req->qiov.size / BDRV_SECTOR_SIZE;
+ blkreq->qiov = &req->qiov;
+ blkreq->cb = virtio_blk_rw_complete;
+ blkreq->opaque = req;
+ blkreq->error = 0;
+
+ mrb->num_writes++;
}
static void virtio_blk_handle_read(VirtIOBlockReq *req)
{
BlockDriverAIOCB *acb;
+ uint64_t sector;
+
+ sector = ldq_p(&req->out->sector);
+
+ if (sector & req->dev->sector_mask) {
+ virtio_blk_rw_complete(req, -EIO);
+ return;
+ }
+ if (req->qiov.size % req->dev->conf->logical_block_size) {
+ virtio_blk_rw_complete(req, -EIO);
+ return;
+ }
- acb = bdrv_aio_readv(req->dev->bs, req->out->sector, &req->qiov,
- req->qiov.size / 512, virtio_blk_rw_complete, req);
+ acb = bdrv_aio_readv(req->dev->bs, sector, &req->qiov,
+ req->qiov.size / BDRV_SECTOR_SIZE,
+ virtio_blk_rw_complete, req);
if (!acb) {
- virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
+ virtio_blk_rw_complete(req, -EIO);
+ }
+}
+
+static void virtio_blk_handle_request(VirtIOBlockReq *req,
+ MultiReqBuffer *mrb)
+{
+ uint32_t type;
+
+ if (req->elem.out_num < 1 || req->elem.in_num < 1) {
+ error_report("virtio-blk missing headers");
+ exit(1);
+ }
+
+ if (req->elem.out_sg[0].iov_len < sizeof(*req->out) ||
+ req->elem.in_sg[req->elem.in_num - 1].iov_len < sizeof(*req->in)) {
+ error_report("virtio-blk header not in correct element");
+ exit(1);
+ }
+
+ req->out = (void *)req->elem.out_sg[0].iov_base;
+ req->in = (void *)req->elem.in_sg[req->elem.in_num - 1].iov_base;
+
+ type = ldl_p(&req->out->type);
+
+ if (type & VIRTIO_BLK_T_FLUSH) {
+ virtio_blk_handle_flush(req, mrb);
+ } else if (type & VIRTIO_BLK_T_SCSI_CMD) {
+ virtio_blk_handle_scsi(req);
+ } else if (type & VIRTIO_BLK_T_GET_ID) {
+ VirtIOBlock *s = req->dev;
+
+ /*
+ * NB: per existing s/n string convention the string is
+ * terminated by '\0' only when shorter than buffer.
+ */
+ strncpy(req->elem.in_sg[0].iov_base,
+ s->serial ? s->serial : "",
+ MIN(req->elem.in_sg[0].iov_len, VIRTIO_BLK_ID_BYTES));
+ virtio_blk_req_complete(req, VIRTIO_BLK_S_OK);
+ } else if (type & VIRTIO_BLK_T_OUT) {
+ qemu_iovec_init_external(&req->qiov, &req->elem.out_sg[1],
+ req->elem.out_num - 1);
+ virtio_blk_handle_write(req, mrb);
+ } else {
+ qemu_iovec_init_external(&req->qiov, &req->elem.in_sg[0],
+ req->elem.in_num - 1);
+ virtio_blk_handle_read(req);
}
}
{
VirtIOBlock *s = to_virtio_blk(vdev);
VirtIOBlockReq *req;
- BlockRequest blkreq[32];
- int num_writes = 0;
- BlockDriverState *old_bs = NULL;
+ MultiReqBuffer mrb = {
+ .num_writes = 0,
+ };
while ((req = virtio_blk_get_request(s))) {
- if (req->elem.out_num < 1 || req->elem.in_num < 1) {
- fprintf(stderr, "virtio-blk missing headers\n");
- exit(1);
- }
-
- if (req->elem.out_sg[0].iov_len < sizeof(*req->out) ||
- req->elem.in_sg[req->elem.in_num - 1].iov_len < sizeof(*req->in)) {
- fprintf(stderr, "virtio-blk header not in correct element\n");
- exit(1);
- }
-
- req->out = (void *)req->elem.out_sg[0].iov_base;
- req->in = (void *)req->elem.in_sg[req->elem.in_num - 1].iov_base;
-
- if (req->out->type & VIRTIO_BLK_T_FLUSH) {
- virtio_blk_handle_flush(req);
- } else if (req->out->type & VIRTIO_BLK_T_SCSI_CMD) {
- virtio_blk_handle_scsi(req);
- } else if (req->out->type & VIRTIO_BLK_T_OUT) {
- qemu_iovec_init_external(&req->qiov, &req->elem.out_sg[1],
- req->elem.out_num - 1);
- virtio_blk_handle_write(blkreq, &num_writes, req, &old_bs);
- } else {
- qemu_iovec_init_external(&req->qiov, &req->elem.in_sg[0],
- req->elem.in_num - 1);
- virtio_blk_handle_read(req);
- }
+ virtio_blk_handle_request(req, &mrb);
}
- if (num_writes > 0) {
- do_multiwrite(old_bs, blkreq, num_writes);
- }
+ virtio_submit_multiwrite(s->bs, &mrb);
/*
* FIXME: Want to check for completions before returning to guest mode,
{
VirtIOBlock *s = opaque;
VirtIOBlockReq *req = s->rq;
+ MultiReqBuffer mrb = {
+ .num_writes = 0,
+ };
qemu_bh_delete(s->bh);
s->bh = NULL;
s->rq = NULL;
while (req) {
- bdrv_aio_writev(req->dev->bs, req->out->sector, &req->qiov,
- req->qiov.size / 512, virtio_blk_rw_complete, req);
+ virtio_blk_handle_request(req, &mrb);
req = req->next;
}
+
+ virtio_submit_multiwrite(s->bs, &mrb);
}
static void virtio_blk_dma_restart_cb(void *opaque, int running, int reason)
stl_raw(&blkcfg.seg_max, 128 - 2);
stw_raw(&blkcfg.cylinders, cylinders);
blkcfg.heads = heads;
- blkcfg.sectors = secs;
+ blkcfg.sectors = secs & ~s->sector_mask;
+ blkcfg.blk_size = s->conf->logical_block_size;
blkcfg.size_max = 0;
- virtio_identify_template(&blkcfg);
- memcpy(&blkcfg.identify[VIRTIO_BLK_ID_SN], s->serial_str,
- VIRTIO_BLK_ID_SN_BYTES);
- memcpy(config, &blkcfg, s->config_size);
+ blkcfg.physical_block_exp = get_physical_block_exp(s->conf);
+ blkcfg.alignment_offset = 0;
+ blkcfg.min_io_size = s->conf->min_io_size / blkcfg.blk_size;
+ blkcfg.opt_io_size = s->conf->opt_io_size / blkcfg.blk_size;
+ memcpy(config, &blkcfg, sizeof(struct virtio_blk_config));
}
static uint32_t virtio_blk_get_features(VirtIODevice *vdev, uint32_t features)
features |= (1 << VIRTIO_BLK_F_SEG_MAX);
features |= (1 << VIRTIO_BLK_F_GEOMETRY);
+ features |= (1 << VIRTIO_BLK_F_TOPOLOGY);
+ features |= (1 << VIRTIO_BLK_F_BLK_SIZE);
if (bdrv_enable_write_cache(s->bs))
features |= (1 << VIRTIO_BLK_F_WCACHE);
- if (strcmp(s->serial_str, "0"))
- features |= 1 << VIRTIO_BLK_F_IDENTIFY;
if (bdrv_is_read_only(s->bs))
features |= 1 << VIRTIO_BLK_F_RO;
VirtIOBlockReq *req = virtio_blk_alloc_request(s);
qemu_get_buffer(f, (unsigned char*)&req->elem, sizeof(req->elem));
req->next = s->rq;
- s->rq = req->next;
+ s->rq = req;
+
+ virtqueue_map_sg(req->elem.in_sg, req->elem.in_addr,
+ req->elem.in_num, 1);
+ virtqueue_map_sg(req->elem.out_sg, req->elem.out_addr,
+ req->elem.out_num, 0);
}
return 0;
}
-VirtIODevice *virtio_blk_init(DeviceState *dev, DriveInfo *dinfo)
+static void virtio_blk_change_cb(void *opaque, int reason)
+{
+ VirtIOBlock *s = opaque;
+
+ if (reason & CHANGE_SIZE) {
+ virtio_notify_config(&s->vdev);
+ }
+}
+
+VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf,
+ char **serial)
{
VirtIOBlock *s;
int cylinders, heads, secs;
static int virtio_blk_id;
- char *ps = (char *)drive_get_serial(dinfo->bdrv);
- size_t size = strlen(ps) ? sizeof(struct virtio_blk_config) :
- offsetof(struct virtio_blk_config, _blk_size);
+ DriveInfo *dinfo;
+
+ if (!conf->bs) {
+ error_report("virtio-blk-pci: drive property not set");
+ return NULL;
+ }
+ if (!bdrv_is_inserted(conf->bs)) {
+ error_report("Device needs media, but drive is empty");
+ return NULL;
+ }
+
+ if (!*serial) {
+ /* try to fall back to value set with legacy -drive serial=... */
+ dinfo = drive_get_by_blockdev(conf->bs);
+ if (*dinfo->serial) {
+ *serial = strdup(dinfo->serial);
+ }
+ }
s = (VirtIOBlock *)virtio_common_init("virtio-blk", VIRTIO_ID_BLOCK,
- size,
+ sizeof(struct virtio_blk_config),
sizeof(VirtIOBlock));
- s->config_size = size;
s->vdev.get_config = virtio_blk_update_config;
s->vdev.get_features = virtio_blk_get_features;
s->vdev.reset = virtio_blk_reset;
- s->bs = dinfo->bdrv;
+ s->bs = conf->bs;
+ s->conf = conf;
+ s->serial = *serial;
s->rq = NULL;
- if (strlen(ps))
- strncpy(s->serial_str, ps, sizeof(s->serial_str));
- else
- snprintf(s->serial_str, sizeof(s->serial_str), "0");
+ s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
- bdrv_set_geometry_hint(s->bs, cylinders, heads, secs);
s->vq = virtio_add_queue(&s->vdev, 128, virtio_blk_handle_output);
qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
- register_savevm("virtio-blk", virtio_blk_id++, 2,
+ s->qdev = dev;
+ register_savevm(dev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
+ bdrv_set_removable(s->bs, 0);
+ bdrv_set_change_cb(s->bs, virtio_blk_change_cb, s);
+ s->bs->buffer_alignment = conf->logical_block_size;
+
+ add_boot_device_path(conf->bootindex, dev, "/disk@0,0");
return &s->vdev;
}
+
+void virtio_blk_exit(VirtIODevice *vdev)
+{
+ VirtIOBlock *s = to_virtio_blk(vdev);
+ unregister_savevm(s->qdev, "virtio-blk", s);
+ virtio_cleanup(vdev);
+}
projects / qemu.git / blobdiff