*
*/
-#include <hw/hw.h>
-#include <hw/pci/msi.h>
-#include <hw/i386/pc.h>
-#include <hw/pci/pci.h>
-#include <hw/sysbus.h>
+#include "qemu/osdep.h"
+#include "hw/hw.h"
+#include "hw/pci/msi.h"
+#include "hw/i386/pc.h"
+#include "hw/pci/pci.h"
#include "qemu/error-report.h"
#include "sysemu/block-backend.h"
#include "sysemu/dma.h"
-#include "internal.h"
-#include <hw/ide/pci.h>
-#include <hw/ide/ahci.h>
+#include "hw/ide/internal.h"
+#include "hw/ide/pci.h"
+#include "hw/ide/ahci.h"
#define DEBUG_AHCI 0
static void check_cmd(AHCIState *s, int port);
static int handle_cmd(AHCIState *s, int port, uint8_t slot);
static void ahci_reset_port(AHCIState *s, int port);
-static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis);
+static bool ahci_write_fis_d2h(AHCIDevice *ad);
static void ahci_init_d2h(AHCIDevice *ad);
static int ahci_dma_prepare_buf(IDEDMA *dma, int32_t limit);
-static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes);
static bool ahci_map_clb_address(AHCIDevice *ad);
static bool ahci_map_fis_address(AHCIDevice *ad);
static void ahci_unmap_clb_address(AHCIDevice *ad);
static void ahci_irq_raise(AHCIState *s, AHCIDevice *dev)
{
- AHCIPCIState *d = container_of(s, AHCIPCIState, ahci);
- PCIDevice *pci_dev =
- (PCIDevice *)object_dynamic_cast(OBJECT(d), TYPE_PCI_DEVICE);
+ DeviceState *dev_state = s->container;
+ PCIDevice *pci_dev = (PCIDevice *) object_dynamic_cast(OBJECT(dev_state),
+ TYPE_PCI_DEVICE);
DPRINTF(0, "raise irq\n");
static void ahci_irq_lower(AHCIState *s, AHCIDevice *dev)
{
- AHCIPCIState *d = container_of(s, AHCIPCIState, ahci);
- PCIDevice *pci_dev =
- (PCIDevice *)object_dynamic_cast(OBJECT(d), TYPE_PCI_DEVICE);
+ DeviceState *dev_state = s->container;
+ PCIDevice *pci_dev = (PCIDevice *) object_dynamic_cast(OBJECT(dev_state),
+ TYPE_PCI_DEVICE);
DPRINTF(0, "lower irq\n");
* Check the cmd register to see if we should start or stop
* the DMA or FIS RX engines.
*
- * @ad: Device to engage.
- * @allow_stop: Allow device to transition from started to stopped?
- * 'no' is useful for migration post_load, which does not expect a transition.
+ * @ad: Device to dis/engage.
*
* @return 0 on success, -1 on error.
*/
-static int ahci_cond_start_engines(AHCIDevice *ad, bool allow_stop)
+static int ahci_cond_start_engines(AHCIDevice *ad)
{
AHCIPortRegs *pr = &ad->port_regs;
-
- if (pr->cmd & PORT_CMD_START) {
- if (ahci_map_clb_address(ad)) {
- pr->cmd |= PORT_CMD_LIST_ON;
- } else {
+ bool cmd_start = pr->cmd & PORT_CMD_START;
+ bool cmd_on = pr->cmd & PORT_CMD_LIST_ON;
+ bool fis_start = pr->cmd & PORT_CMD_FIS_RX;
+ bool fis_on = pr->cmd & PORT_CMD_FIS_ON;
+
+ if (cmd_start && !cmd_on) {
+ if (!ahci_map_clb_address(ad)) {
+ pr->cmd &= ~PORT_CMD_START;
error_report("AHCI: Failed to start DMA engine: "
"bad command list buffer address");
return -1;
}
- } else if (pr->cmd & PORT_CMD_LIST_ON) {
- if (allow_stop) {
- ahci_unmap_clb_address(ad);
- pr->cmd = pr->cmd & ~(PORT_CMD_LIST_ON);
- } else {
- error_report("AHCI: DMA engine should be off, "
- "but appears to still be running");
- return -1;
- }
+ } else if (!cmd_start && cmd_on) {
+ ahci_unmap_clb_address(ad);
}
- if (pr->cmd & PORT_CMD_FIS_RX) {
- if (ahci_map_fis_address(ad)) {
- pr->cmd |= PORT_CMD_FIS_ON;
- } else {
+ if (fis_start && !fis_on) {
+ if (!ahci_map_fis_address(ad)) {
+ pr->cmd &= ~PORT_CMD_FIS_RX;
error_report("AHCI: Failed to start FIS receive engine: "
"bad FIS receive buffer address");
return -1;
}
- } else if (pr->cmd & PORT_CMD_FIS_ON) {
- if (allow_stop) {
- ahci_unmap_fis_address(ad);
- pr->cmd = pr->cmd & ~(PORT_CMD_FIS_ON);
- } else {
- error_report("AHCI: FIS receive engine should be off, "
- "but appears to still be running");
- return -1;
- }
+ } else if (!fis_start && fis_on) {
+ ahci_unmap_fis_address(ad);
}
return 0;
break;
case PORT_CMD:
/* Block any Read-only fields from being set;
- * including LIST_ON and FIS_ON. */
- pr->cmd = (pr->cmd & PORT_CMD_RO_MASK) | (val & ~PORT_CMD_RO_MASK);
+ * including LIST_ON and FIS_ON.
+ * The spec requires to set ICC bits to zero after the ICC change
+ * is done. We don't support ICC state changes, therefore always
+ * force the ICC bits to zero.
+ */
+ pr->cmd = (pr->cmd & PORT_CMD_RO_MASK) |
+ (val & ~(PORT_CMD_RO_MASK|PORT_CMD_ICC_MASK));
- /* Check FIS RX and CLB engines, allow transition to false: */
- ahci_cond_start_engines(&s->dev[port], true);
+ /* Check FIS RX and CLB engines */
+ ahci_cond_start_engines(&s->dev[port]);
/* XXX usually the FIS would be pending on the bus here and
issuing deferred until the OS enables FIS receival.
if ((pr->cmd & PORT_CMD_FIS_ON) &&
!s->dev[port].init_d2h_sent) {
ahci_init_d2h(&s->dev[port]);
- s->dev[port].init_d2h_sent = true;
}
check_cmd(s, port);
int ofst = addr - aligned;
uint64_t lo = ahci_mem_read_32(opaque, aligned);
uint64_t hi;
+ uint64_t val;
/* if < 8 byte read does not cross 4 byte boundary */
if (ofst + size <= 4) {
- return lo >> (ofst * 8);
+ val = lo >> (ofst * 8);
+ } else {
+ g_assert_cmpint(size, >, 1);
+
+ /* If the 64bit read is unaligned, we will produce undefined
+ * results. AHCI does not support unaligned 64bit reads. */
+ hi = ahci_mem_read_32(opaque, aligned + 4);
+ val = (hi << 32 | lo) >> (ofst * 8);
}
- g_assert_cmpint(size, >, 1);
- /* If the 64bit read is unaligned, we will produce undefined
- * results. AHCI does not support unaligned 64bit reads. */
- hi = ahci_mem_read_32(opaque, aligned + 4);
- return (hi << 32 | lo) >> (ofst * 8);
+ DPRINTF(-1, "addr=0x%" HWADDR_PRIx " val=0x%" PRIx64 ", size=%d\n",
+ addr, val, size);
+ return val;
}
{
AHCIState *s = opaque;
+ DPRINTF(-1, "addr=0x%" HWADDR_PRIx " val=0x%" PRIx64 ", size=%d\n",
+ addr, val, size);
+
/* Only aligned reads are allowed on AHCI */
if (addr & 3) {
fprintf(stderr, "ahci: Mis-aligned write to addr 0x"
s->control_regs.cap = (s->ports - 1) |
(AHCI_NUM_COMMAND_SLOTS << 8) |
(AHCI_SUPPORTED_SPEED_GEN1 << AHCI_SUPPORTED_SPEED) |
- HOST_CAP_NCQ | HOST_CAP_AHCI;
+ HOST_CAP_NCQ | HOST_CAP_AHCI | HOST_CAP_64;
s->control_regs.impl = (1 << s->ports) - 1;
static void ahci_init_d2h(AHCIDevice *ad)
{
- uint8_t init_fis[20];
IDEState *ide_state = &ad->port.ifs[0];
+ AHCIPortRegs *pr = &ad->port_regs;
- memset(init_fis, 0, sizeof(init_fis));
-
- init_fis[4] = 1;
- init_fis[12] = 1;
+ if (ad->init_d2h_sent) {
+ return;
+ }
- if (ide_state->drive_kind == IDE_CD) {
- init_fis[5] = ide_state->lcyl;
- init_fis[6] = ide_state->hcyl;
+ if (ahci_write_fis_d2h(ad)) {
+ ad->init_d2h_sent = true;
+ /* We're emulating receiving the first Reg H2D Fis from the device;
+ * Update the SIG register, but otherwise proceed as normal. */
+ pr->sig = ((uint32_t)ide_state->hcyl << 24) |
+ (ide_state->lcyl << 16) |
+ (ide_state->sector << 8) |
+ (ide_state->nsector & 0xFF);
}
+}
+
+static void ahci_set_signature(AHCIDevice *ad, uint32_t sig)
+{
+ IDEState *s = &ad->port.ifs[0];
+ s->hcyl = sig >> 24 & 0xFF;
+ s->lcyl = sig >> 16 & 0xFF;
+ s->sector = sig >> 8 & 0xFF;
+ s->nsector = sig & 0xFF;
- ahci_write_fis_d2h(ad, init_fis);
+ DPRINTF(ad->port_no, "set hcyl:lcyl:sect:nsect = 0x%08x\n", sig);
}
static void ahci_reset_port(AHCIState *s, int port)
}
s->dev[port].port_state = STATE_RUN;
- if (!ide_state->blk) {
- pr->sig = 0;
- ide_state->status = SEEK_STAT | WRERR_STAT;
- } else if (ide_state->drive_kind == IDE_CD) {
- pr->sig = SATA_SIGNATURE_CDROM;
- ide_state->lcyl = 0x14;
- ide_state->hcyl = 0xeb;
- DPRINTF(port, "set lcyl = %d\n", ide_state->lcyl);
+ if (ide_state->drive_kind == IDE_CD) {
+ ahci_set_signature(d, SATA_SIGNATURE_CDROM);\
ide_state->status = SEEK_STAT | WRERR_STAT | READY_STAT;
} else {
- pr->sig = SATA_SIGNATURE_DISK;
+ ahci_set_signature(d, SATA_SIGNATURE_DISK);
ide_state->status = SEEK_STAT | WRERR_STAT;
}
AHCIPortRegs *pr = &ad->port_regs;
map_page(ad->hba->as, &ad->res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
- return ad->res_fis != NULL;
+ if (ad->res_fis != NULL) {
+ pr->cmd |= PORT_CMD_FIS_ON;
+ return true;
+ }
+
+ pr->cmd &= ~PORT_CMD_FIS_ON;
+ return false;
}
static void ahci_unmap_fis_address(AHCIDevice *ad)
{
+ if (ad->res_fis == NULL) {
+ DPRINTF(ad->port_no, "Attempt to unmap NULL FIS address\n");
+ return;
+ }
+ ad->port_regs.cmd &= ~PORT_CMD_FIS_ON;
dma_memory_unmap(ad->hba->as, ad->res_fis, 256,
DMA_DIRECTION_FROM_DEVICE, 256);
ad->res_fis = NULL;
ad->cur_cmd = NULL;
map_page(ad->hba->as, &ad->lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
- return ad->lst != NULL;
+ if (ad->lst != NULL) {
+ pr->cmd |= PORT_CMD_LIST_ON;
+ return true;
+ }
+
+ pr->cmd &= ~PORT_CMD_LIST_ON;
+ return false;
}
static void ahci_unmap_clb_address(AHCIDevice *ad)
{
+ if (ad->lst == NULL) {
+ DPRINTF(ad->port_no, "Attempt to unmap NULL CLB address\n");
+ return;
+ }
+ ad->port_regs.cmd &= ~PORT_CMD_LIST_ON;
dma_memory_unmap(ad->hba->as, ad->lst, 1024,
DMA_DIRECTION_FROM_DEVICE, 1024);
ad->lst = NULL;
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_PIOS_FIS);
}
-static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
+static bool ahci_write_fis_d2h(AHCIDevice *ad)
{
AHCIPortRegs *pr = &ad->port_regs;
uint8_t *d2h_fis;
IDEState *s = &ad->port.ifs[0];
if (!ad->res_fis || !(pr->cmd & PORT_CMD_FIS_RX)) {
- return;
+ return false;
}
d2h_fis = &ad->res_fis[RES_FIS_RFIS];
}
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS);
+ return true;
}
static int prdt_tbl_entry_size(const AHCI_SG *tbl)
return (le32_to_cpu(tbl->flags_size) & AHCI_PRDT_SIZE_MASK) + 1;
}
+/**
+ * Fetch entries in a guest-provided PRDT and convert it into a QEMU SGlist.
+ * @ad: The AHCIDevice for whom we are building the SGList.
+ * @sglist: The SGList target to add PRD entries to.
+ * @cmd: The AHCI Command Header that describes where the PRDT is.
+ * @limit: The remaining size of the S/ATA transaction, in bytes.
+ * @offset: The number of bytes already transferred, in bytes.
+ *
+ * The AHCI PRDT can describe up to 256GiB. S/ATA only support transactions of
+ * up to 32MiB as of ATA8-ACS3 rev 1b, assuming a 512 byte sector size. We stop
+ * building the sglist from the PRDT as soon as we hit @limit bytes,
+ * which is <= INT32_MAX/2GiB.
+ */
static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist,
- AHCICmdHdr *cmd, int64_t limit, int32_t offset)
+ AHCICmdHdr *cmd, int64_t limit, uint64_t offset)
{
uint16_t opts = le16_to_cpu(cmd->opts);
uint16_t prdtl = le16_to_cpu(cmd->prdtl);
IDEBus *bus = &ad->port;
BusState *qbus = BUS(bus);
- /*
- * Note: AHCI PRDT can describe up to 256GiB. SATA/ATA only support
- * transactions of up to 32MiB as of ATA8-ACS3 rev 1b, assuming a
- * 512 byte sector size. We limit the PRDT in this implementation to
- * a reasonably large 2GiB, which can accommodate the maximum transfer
- * request for sector sizes up to 32K.
- */
-
if (!prdtl) {
DPRINTF(ad->port_no, "no sg list given by guest: 0x%08x\n", opts);
return -1;
qemu_sglist_add(sglist, le64_to_cpu(tbl[i].addr),
MIN(prdt_tbl_entry_size(&tbl[i]),
limit - sglist->size));
- if (sglist->size > INT32_MAX) {
- error_report("AHCI Physical Region Descriptor Table describes "
- "more than 2 GiB.\n");
- qemu_sglist_destroy(sglist);
- r = -1;
- goto out;
- }
}
}
ide_state->error = ABRT_ERR;
ide_state->status = READY_STAT | ERR_STAT;
ncq_tfs->drive->port_regs.scr_err |= (1 << ncq_tfs->tag);
+ qemu_sglist_destroy(&ncq_tfs->sglist);
+ ncq_tfs->used = 0;
}
static void ncq_finish(NCQTransferState *ncq_tfs)
NCQTransferState *ncq_tfs = (NCQTransferState *)opaque;
IDEState *ide_state = &ncq_tfs->drive->port.ifs[0];
+ ncq_tfs->aiocb = NULL;
if (ret == -ECANCELED) {
return;
}
dma_acct_start(ide_state->blk, &ncq_tfs->acct,
&ncq_tfs->sglist, BLOCK_ACCT_READ);
ncq_tfs->aiocb = dma_blk_read(ide_state->blk, &ncq_tfs->sglist,
- ncq_tfs->lba, ncq_cb, ncq_tfs);
+ ncq_tfs->lba << BDRV_SECTOR_BITS,
+ BDRV_SECTOR_SIZE,
+ ncq_cb, ncq_tfs);
break;
case WRITE_FPDMA_QUEUED:
DPRINTF(port, "NCQ writing %d sectors to LBA %"PRId64", tag %d\n",
dma_acct_start(ide_state->blk, &ncq_tfs->acct,
&ncq_tfs->sglist, BLOCK_ACCT_WRITE);
ncq_tfs->aiocb = dma_blk_write(ide_state->blk, &ncq_tfs->sglist,
- ncq_tfs->lba, ncq_cb, ncq_tfs);
+ ncq_tfs->lba << BDRV_SECTOR_BITS,
+ BDRV_SECTOR_SIZE,
+ ncq_cb, ncq_tfs);
break;
default:
DPRINTF(port, "error: unsupported NCQ command (0x%02x) received\n",
ncq_tfs->cmd);
- qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_err(ncq_tfs);
}
}
error_report("ahci: PRDT length for NCQ command (0x%zx) "
"is smaller than the requested size (0x%zx)",
ncq_tfs->sglist.size, size);
- qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_err(ncq_tfs);
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_OVERFLOW);
return;
s->data_ptr = s->data_end;
/* Update number of transferred bytes, destroy sglist */
- ahci_commit_buf(dma, size);
+ dma_buf_commit(s, size);
s->end_transfer_func(s);
}
/**
- * Called in DMA R/W chains to read the PRDT, utilizing ahci_populate_sglist.
- * Not currently invoked by PIO R/W chains,
- * which invoke ahci_populate_sglist via ahci_start_transfer.
+ * Called in DMA and PIO R/W chains to read the PRDT.
+ * Not shared with NCQ pathways.
*/
static int32_t ahci_dma_prepare_buf(IDEDMA *dma, int32_t limit)
{
}
/**
- * Destroys the scatter-gather list,
- * and updates the command header with a bytes-read value.
- * called explicitly via ahci_dma_rw_buf (ATAPI DMA),
- * and ahci_start_transfer (PIO R/W),
- * and called via callback from ide_dma_cb for DMA R/W paths.
+ * Updates the command header with a bytes-read value.
+ * Called via dma_buf_commit, for both DMA and PIO paths.
+ * sglist destruction is handled within dma_buf_commit.
*/
static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
- IDEState *s = &ad->port.ifs[0];
tx_bytes += le32_to_cpu(ad->cur_cmd->status);
ad->cur_cmd->status = cpu_to_le32(tx_bytes);
-
- qemu_sglist_destroy(&s->sg);
}
static int ahci_dma_rw_buf(IDEDMA *dma, int is_write)
}
/* free sglist, update byte count */
- ahci_commit_buf(dma, l);
+ dma_buf_commit(s, l);
s->io_buffer_index += l;
- s->io_buffer_offset += l;
DPRINTF(ad->port_no, "len=%#x\n", l);
DPRINTF(ad->port_no, "cmd done\n");
/* update d2h status */
- ahci_write_fis_d2h(ad, NULL);
+ ahci_write_fis_d2h(ad);
if (!ad->check_bh) {
/* maybe we still have something to process, check later */
.cmd_done = ahci_cmd_done,
};
-void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports)
+void ahci_init(AHCIState *s, DeviceState *qdev)
+{
+ s->container = qdev;
+ /* XXX BAR size should be 1k, but that breaks, so bump it to 4k for now */
+ memory_region_init_io(&s->mem, OBJECT(qdev), &ahci_mem_ops, s,
+ "ahci", AHCI_MEM_BAR_SIZE);
+ memory_region_init_io(&s->idp, OBJECT(qdev), &ahci_idp_ops, s,
+ "ahci-idp", 32);
+}
+
+void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports)
{
qemu_irq *irqs;
int i;
s->ports = ports;
s->dev = g_new0(AHCIDevice, ports);
ahci_reg_init(s);
- /* XXX BAR size should be 1k, but that breaks, so bump it to 4k for now */
- memory_region_init_io(&s->mem, OBJECT(qdev), &ahci_mem_ops, s,
- "ahci", AHCI_MEM_BAR_SIZE);
- memory_region_init_io(&s->idp, OBJECT(qdev), &ahci_idp_ops, s,
- "ahci-idp", 32);
-
irqs = qemu_allocate_irqs(ahci_irq_set, s, s->ports);
-
for (i = 0; i < s->ports; i++) {
AHCIDevice *ad = &s->dev[i];
ad->port.dma->ops = &ahci_dma_ops;
ide_register_restart_cb(&ad->port);
}
+ g_free(irqs);
}
void ahci_uninit(AHCIState *s)
int i, j;
struct AHCIDevice *ad;
NCQTransferState *ncq_tfs;
+ AHCIPortRegs *pr;
AHCIState *s = opaque;
for (i = 0; i < s->ports; i++) {
ad = &s->dev[i];
+ pr = &ad->port_regs;
- /* Only remap the CLB address if appropriate, disallowing a state
- * transition from 'on' to 'off' it should be consistent here. */
- if (ahci_cond_start_engines(ad, false) != 0) {
+ if (!(pr->cmd & PORT_CMD_START) && (pr->cmd & PORT_CMD_LIST_ON)) {
+ error_report("AHCI: DMA engine should be off, but status bit "
+ "indicates it is still running.");
+ return -1;
+ }
+ if (!(pr->cmd & PORT_CMD_FIS_RX) && (pr->cmd & PORT_CMD_FIS_ON)) {
+ error_report("AHCI: FIS RX engine should be off, but status bit "
+ "indicates it is still running.");
+ return -1;
+ }
+
+ /* After a migrate, the DMA/FIS engines are "off" and
+ * need to be conditionally restarted */
+ pr->cmd &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON);
+ if (ahci_cond_start_engines(ad) != 0) {
return -1;
}
},
};
-#define TYPE_SYSBUS_AHCI "sysbus-ahci"
-#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
-
-typedef struct SysbusAHCIState {
- /*< private >*/
- SysBusDevice parent_obj;
- /*< public >*/
-
- AHCIState ahci;
- uint32_t num_ports;
-} SysbusAHCIState;
-
static const VMStateDescription vmstate_sysbus_ahci = {
.name = "sysbus-ahci",
.fields = (VMStateField[]) {
ahci_reset(&s->ahci);
}
-static void sysbus_ahci_realize(DeviceState *dev, Error **errp)
+static void sysbus_ahci_init(Object *obj)
{
- SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
- SysbusAHCIState *s = SYSBUS_AHCI(dev);
+ SysbusAHCIState *s = SYSBUS_AHCI(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
- ahci_init(&s->ahci, dev, &address_space_memory, s->num_ports);
+ ahci_init(&s->ahci, DEVICE(obj));
sysbus_init_mmio(sbd, &s->ahci.mem);
sysbus_init_irq(sbd, &s->ahci.irq);
}
+static void sysbus_ahci_realize(DeviceState *dev, Error **errp)
+{
+ SysbusAHCIState *s = SYSBUS_AHCI(dev);
+
+ ahci_realize(&s->ahci, dev, &address_space_memory, s->num_ports);
+}
+
static Property sysbus_ahci_properties[] = {
DEFINE_PROP_UINT32("num-ports", SysbusAHCIState, num_ports, 1),
DEFINE_PROP_END_OF_LIST(),
.name = TYPE_SYSBUS_AHCI,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(SysbusAHCIState),
+ .instance_init = sysbus_ahci_init,
.class_init = sysbus_ahci_class_init,
};
+#define ALLWINNER_AHCI_BISTAFR ((0xa0 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_BISTCR ((0xa4 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_BISTFCTR ((0xa8 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_BISTSR ((0xac - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_BISTDECR ((0xb0 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_DIAGNR0 ((0xb4 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_DIAGNR1 ((0xb8 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_OOBR ((0xbc - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_PHYCS0R ((0xc0 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_PHYCS1R ((0xc4 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_PHYCS2R ((0xc8 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_TIMER1MS ((0xe0 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_GPARAM1R ((0xe8 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_GPARAM2R ((0xec - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_PPARAMR ((0xf0 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_TESTR ((0xf4 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_VERSIONR ((0xf8 - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_IDR ((0xfc - ALLWINNER_AHCI_MMIO_OFF) / 4)
+#define ALLWINNER_AHCI_RWCR ((0xfc - ALLWINNER_AHCI_MMIO_OFF) / 4)
+
+static uint64_t allwinner_ahci_mem_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ AllwinnerAHCIState *a = opaque;
+ uint64_t val = a->regs[addr/4];
+
+ switch (addr / 4) {
+ case ALLWINNER_AHCI_PHYCS0R:
+ val |= 0x2 << 28;
+ break;
+ case ALLWINNER_AHCI_PHYCS2R:
+ val &= ~(0x1 << 24);
+ break;
+ }
+ DPRINTF(-1, "addr=0x%" HWADDR_PRIx " val=0x%" PRIx64 ", size=%d\n",
+ addr, val, size);
+ return val;
+}
+
+static void allwinner_ahci_mem_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ AllwinnerAHCIState *a = opaque;
+
+ DPRINTF(-1, "addr=0x%" HWADDR_PRIx " val=0x%" PRIx64 ", size=%d\n",
+ addr, val, size);
+ a->regs[addr/4] = val;
+}
+
+static const MemoryRegionOps allwinner_ahci_mem_ops = {
+ .read = allwinner_ahci_mem_read,
+ .write = allwinner_ahci_mem_write,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 4,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void allwinner_ahci_init(Object *obj)
+{
+ SysbusAHCIState *s = SYSBUS_AHCI(obj);
+ AllwinnerAHCIState *a = ALLWINNER_AHCI(obj);
+
+ memory_region_init_io(&a->mmio, OBJECT(obj), &allwinner_ahci_mem_ops, a,
+ "allwinner-ahci", ALLWINNER_AHCI_MMIO_SIZE);
+ memory_region_add_subregion(&s->ahci.mem, ALLWINNER_AHCI_MMIO_OFF,
+ &a->mmio);
+}
+
+static const VMStateDescription vmstate_allwinner_ahci = {
+ .name = "allwinner-ahci",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, AllwinnerAHCIState,
+ ALLWINNER_AHCI_MMIO_SIZE/4),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void allwinner_ahci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->vmsd = &vmstate_allwinner_ahci;
+}
+
+static const TypeInfo allwinner_ahci_info = {
+ .name = TYPE_ALLWINNER_AHCI,
+ .parent = TYPE_SYSBUS_AHCI,
+ .instance_size = sizeof(AllwinnerAHCIState),
+ .instance_init = allwinner_ahci_init,
+ .class_init = allwinner_ahci_class_init,
+};
+
static void sysbus_ahci_register_types(void)
{
type_register_static(&sysbus_ahci_info);
+ type_register_static(&allwinner_ahci_info);
}
type_init(sysbus_ahci_register_types)
projects / qemu.git / blobdiff