HXCOMM architectures.
HXCOMM HXCOMM can be used for comments, discarded from both texi and C
-DEFHEADING(Standard options)
+DEFHEADING(Standard options:)
STEXI
@table @option
ETEXI
"-machine [type=]name[,prop[=value][,...]]\n"
" selects emulated machine ('-machine help' for list)\n"
" property accel=accel1[:accel2[:...]] selects accelerator\n"
- " supported accelerators are kvm, xen, hax or tcg (default: tcg)\n"
+ " supported accelerators are kvm, xen, hax, hvf or tcg (default: tcg)\n"
" kernel_irqchip=on|off|split controls accelerated irqchip support (default=off)\n"
" vmport=on|off|auto controls emulation of vmport (default: auto)\n"
" kvm_shadow_mem=size of KVM shadow MMU in bytes\n"
" suppress-vmdesc=on|off disables self-describing migration (default=off)\n"
" nvdimm=on|off controls NVDIMM support (default=off)\n"
" enforce-config-section=on|off enforce configuration section migration (default=off)\n"
- " s390-squash-mcss=on|off controls support for squashing into default css (default=off)\n",
+ " s390-squash-mcss=on|off (deprecated) controls support for squashing into default css (default=off)\n",
QEMU_ARCH_ALL)
STEXI
@item -machine [type=]@var{name}[,prop=@var{value}[,...]]
@table @option
@item accel=@var{accels1}[:@var{accels2}[:...]]
This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax or tcg can be available. By default, tcg is used. If there is
+kvm, xen, hax, hvf or tcg can be available. By default, tcg is used. If there is
more than one accelerator specified, the next one is used if the previous one
fails to initialize.
@item kernel_irqchip=on|off
@item s390-squash-mcss=on|off
Enables or disables squashing subchannels into the default css.
The default is off.
+NOTE: This property is deprecated and will be removed in future releases.
+The ``s390-squash-mcss=on`` property has been obsoleted by allowing the
+cssid to be chosen freely. Instead of squashing subchannels into the
+default channel subsystem image for guests that do not support multiple
+channel subsystems, all devices can be put into the default channel
+subsystem image.
@item enforce-config-section=on|off
If @option{enforce-config-section} is set to @var{on}, force migration
code to send configuration section even if the machine-type sets the
DEF("accel", HAS_ARG, QEMU_OPTION_accel,
"-accel [accel=]accelerator[,thread=single|multi]\n"
- " select accelerator (kvm, xen, hax or tcg; use 'help' for a list)\n"
- " thread=single|multi (enable multi-threaded TCG)\n", QEMU_ARCH_ALL)
+ " select accelerator (kvm, xen, hax, hvf or tcg; use 'help' for a list)\n"
+ " thread=single|multi (enable multi-threaded TCG)", QEMU_ARCH_ALL)
STEXI
@item -accel @var{name}[,prop=@var{value}[,...]]
@findex -accel
This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax or tcg can be available. By default, tcg is used. If there is
+kvm, xen, hax, hvf or tcg can be available. By default, tcg is used. If there is
more than one accelerator specified, the next one is used if the previous one
fails to initialize.
@table @option
DEF("numa", HAS_ARG, QEMU_OPTION_numa,
"-numa node[,mem=size][,cpus=firstcpu[-lastcpu]][,nodeid=node]\n"
"-numa node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node]\n"
- "-numa dist,src=source,dst=destination,val=distance\n", QEMU_ARCH_ALL)
+ "-numa dist,src=source,dst=destination,val=distance\n"
+ "-numa cpu,node-id=node[,socket-id=x][,core-id=y][,thread-id=z]\n",
+ QEMU_ARCH_ALL)
STEXI
@item -numa node[,mem=@var{size}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}]
@itemx -numa node[,memdev=@var{id}][,cpus=@var{firstcpu}[-@var{lastcpu}]][,nodeid=@var{node}]
qemu-system-i386 -global ide-hd.physical_block_size=4096 disk-image.img
@end example
-In particular, you can use this to set driver properties for devices which are
-created automatically by the machine model. To create a device which is not
+In particular, you can use this to set driver properties for devices which are
+created automatically by the machine model. To create a device which is not
created automatically and set properties on it, use -@option{device}.
-global @var{driver}.@var{prop}=@var{value} is shorthand for -global
ETEXI
DEFHEADING()
-DEFHEADING(Block device options)
+DEFHEADING(Block device options:)
STEXI
@table @option
ETEXI
The path to the image file in the local filesystem
@item aio
Specifies the AIO backend (threads/native, default: threads)
+@item locking
+Specifies whether the image file is protected with Linux OFD / POSIX locks. The
+default is to use the Linux Open File Descriptor API if available, otherwise no
+lock is applied. (auto/on/off, default: auto)
@end table
Example:
@example
@item media=@var{media}
This option defines the type of the media: disk or cdrom.
@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
-These options have the same definition as they have in @option{-hdachs}.
-These parameters are deprecated, use the corresponding parameters
+Force disk physical geometry and the optional BIOS translation (trans=none or
+lba). These parameters are deprecated, use the corresponding parameters
of @code{-device} instead.
@item snapshot=@var{snapshot}
@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive
the write back by pressing @key{C-a s} (@pxref{disk_images}).
ETEXI
-DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \
- "-hdachs c,h,s[,t]\n" \
- " force hard disk 0 physical geometry and the optional BIOS\n" \
- " translation (t=none or lba) (usually QEMU can guess them)\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -hdachs @var{c},@var{h},@var{s},[,@var{t}]
-@findex -hdachs
-Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <=
-@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS
-translation mode (@var{t}=none, lba or auto). Usually QEMU can guess
-all those parameters. This option is deprecated, please use
-@code{-device ide-hd,cyls=c,heads=h,secs=s,...} instead.
-ETEXI
-
DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev,
"-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n"
" [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd][,fmode=fmode][,dmode=dmode]\n"
Create synthetic file system image
ETEXI
+DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi,
+ "-iscsi [user=user][,password=password]\n"
+ " [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE\n"
+ " [,initiator-name=initiator-iqn][,id=target-iqn]\n"
+ " [,timeout=timeout]\n"
+ " iSCSI session parameters\n", QEMU_ARCH_ALL)
+
+STEXI
+@item -iscsi
+@findex -iscsi
+Configure iSCSI session parameters.
+ETEXI
+
STEXI
@end table
ETEXI
DEFHEADING()
-DEFHEADING(USB options)
+DEFHEADING(USB options:)
STEXI
@table @option
ETEXI
means QEMU is able to report the mouse position without having to grab the
mouse. Also overrides the PS/2 mouse emulation when activated.
-@item disk:[format=@var{format}]:@var{file}
-Mass storage device based on file. The optional @var{format} argument
-will be used rather than detecting the format. Can be used to specify
-@code{format=raw} to avoid interpreting an untrusted format header.
-
-@item host:@var{bus}.@var{addr}
-Pass through the host device identified by @var{bus}.@var{addr} (Linux only).
-
-@item host:@var{vendor_id}:@var{product_id}
-Pass through the host device identified by @var{vendor_id}:@var{product_id}
-(Linux only).
-
-@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev}
-Serial converter to host character device @var{dev}, see @code{-serial} for the
-available devices.
-
@item braille
Braille device. This will use BrlAPI to display the braille output on a real
or fake device.
-@item net:@var{options}
-Network adapter that supports CDC ethernet and RNDIS protocols.
-
@end table
ETEXI
ETEXI
DEFHEADING()
-DEFHEADING(Display options)
+DEFHEADING(Display options:)
STEXI
@table @option
ETEXI
ETEXI
ARCHHEADING(, QEMU_ARCH_I386)
-ARCHHEADING(i386 target only, QEMU_ARCH_I386)
+ARCHHEADING(i386 target only:, QEMU_ARCH_I386)
STEXI
@table @option
ETEXI
ETEXI
DEFHEADING()
-DEFHEADING(Network options)
+DEFHEADING(Network options:)
STEXI
@table @option
ETEXI
#endif
"-netdev vhost-user,id=str,chardev=dev[,vhostforce=on|off]\n"
" configure a vhost-user network, backed by a chardev 'dev'\n"
- "-netdev hubport,id=str,hubid=n\n"
+ "-netdev hubport,id=str,hubid=n[,netdev=nd]\n"
" configure a hub port on QEMU VLAN 'n'\n", QEMU_ARCH_ALL)
DEF("net", HAS_ARG, QEMU_OPTION_net,
- "-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n"
- " old way to create a new NIC and connect it to VLAN 'n'\n"
- " (use the '-device devtype,netdev=str' option if possible instead)\n"
+ "-net nic[,vlan=n][,netdev=nd][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n"
+ " configure or create an on-board (or machine default) NIC and\n"
+ " connect it either to VLAN 'n' or the netdev 'nd' (for pluggable\n"
+ " NICs please use '-device devtype,netdev=nd' instead)\n"
"-net dump[,vlan=n][,file=f][,len=n]\n"
" dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n"
"-net none use it alone to have zero network devices. If no -net option\n"
" old way to initialize a host network interface\n"
" (use the -netdev option if possible instead)\n", QEMU_ARCH_ALL)
STEXI
-@item -net nic[,vlan=@var{n}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}]
+@item -net nic[,vlan=@var{n}][,netdev=@var{nd}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}]
@findex -net
-Create a new Network Interface Card and connect it to VLAN @var{n} (@var{n}
-= 0 is the default). The NIC is an e1000 by default on the PC
+Configure or create an on-board (or machine default) Network Interface Card
+(NIC) and connect it either to VLAN @var{n} (@var{n} = 0 is the default), or
+to the netdev @var{nd}. The NIC is an e1000 by default on the PC
target. Optionally, the MAC address can be changed to @var{mac}, the
device address set to @var{addr} (PCI cards only),
and a @var{name} can be assigned for use in monitor commands.
#launch a QEMU instance with two NICs, each one connected
#to a TAP device
qemu-system-i386 linux.img \
- -net nic,vlan=0 -net tap,vlan=0,ifname=tap0 \
- -net nic,vlan=1 -net tap,vlan=1,ifname=tap1
+ -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \
+ -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
@end example
@example
This transport allows a VM to communicate to another VM, router or firewall directly.
+@table @option
@item src=@var{srcaddr}
source address (mandatory)
@item dst=@var{dstaddr}
networks which have packet reorder.
@item offset=@var{offset}
Add an extra offset between header and data
+@end table
For example, to attach a VM running on host 4.3.2.1 via L2TPv3 to the bridge br-lan
on the remote Linux host 1.2.3.4:
qemu-system-i386 linux.img -net nic -net vde,sock=/tmp/myswitch
@end example
-@item -netdev hubport,id=@var{id},hubid=@var{hubid}
+@item -netdev hubport,id=@var{id},hubid=@var{hubid}[,netdev=@var{nd}]
Create a hub port on QEMU "vlan" @var{hubid}.
The hubport netdev lets you connect a NIC to a QEMU "vlan" instead of a single
netdev. @code{-net} and @code{-device} with parameter @option{vlan} create the
-required hub automatically.
+required hub automatically. Alternatively, you can also connect the hubport
+to another netdev with ID @var{nd} by using the @option{netdev=@var{nd}}
+option.
@item -netdev vhost-user,chardev=@var{id}[,vhostforce=on|off][,queues=n]
ETEXI
DEFHEADING()
-DEFHEADING(Character device options)
-STEXI
-
-The general form of a character device option is:
-@table @option
-ETEXI
+DEFHEADING(Character device options:)
DEF("chardev", HAS_ARG, QEMU_OPTION_chardev,
"-chardev help\n"
)
STEXI
+
+The general form of a character device option is:
+@table @option
@item -chardev @var{backend} ,id=@var{id} [,mux=on|off] [,@var{options}]
@findex -chardev
Backend is one of:
@option{spiceport}.
The specific backend will determine the applicable options.
-Use "-chardev help" to print all available chardev backend types.
+Use @code{-chardev help} to print all available chardev backend types.
All devices must have an id, which can be any string up to 127 characters long.
It is used to uniquely identify this device in other command line directives.
option controls whether the log file will be truncated or appended to when
opened.
-Further options to each backend are described below.
+@end table
+The available backends are:
+
+@table @option
@item -chardev null ,id=@var{id}
A void device. This device will not emit any data, and will drop any data it
receives. The null backend does not take any options.
ETEXI
DEFHEADING()
-DEFHEADING(Device URL Syntax)
-STEXI
-
-In addition to using normal file images for the emulated storage devices,
-QEMU can also use networked resources such as iSCSI devices. These are
-specified using a special URL syntax.
-
-@table @option
-@item iSCSI
-iSCSI support allows QEMU to access iSCSI resources directly and use as
-images for the guest storage. Both disk and cdrom images are supported.
-
-Syntax for specifying iSCSI LUNs is
-``iscsi://<target-ip>[:<port>]/<target-iqn>/<lun>''
-
-By default qemu will use the iSCSI initiator-name
-'iqn.2008-11.org.linux-kvm[:<name>]' but this can also be set from the command
-line or a configuration file.
-
-Since version Qemu 2.4 it is possible to specify a iSCSI request timeout to detect
-stalled requests and force a reestablishment of the session. The timeout
-is specified in seconds. The default is 0 which means no timeout. Libiscsi
-1.15.0 or greater is required for this feature.
-
-Example (without authentication):
-@example
-qemu-system-i386 -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
- -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \
- -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
-@end example
-
-Example (CHAP username/password via URL):
-@example
-qemu-system-i386 -drive file=iscsi://user%password@@192.0.2.1/iqn.2001-04.com.example/1
-@end example
-
-Example (CHAP username/password via environment variables):
-@example
-LIBISCSI_CHAP_USERNAME="user" \
-LIBISCSI_CHAP_PASSWORD="password" \
-qemu-system-i386 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
-@end example
-
-iSCSI support is an optional feature of QEMU and only available when
-compiled and linked against libiscsi.
-ETEXI
-DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi,
- "-iscsi [user=user][,password=password]\n"
- " [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE\n"
- " [,initiator-name=initiator-iqn][,id=target-iqn]\n"
- " [,timeout=timeout]\n"
- " iSCSI session parameters\n", QEMU_ARCH_ALL)
-STEXI
-
-iSCSI parameters such as username and password can also be specified via
-a configuration file. See qemu-doc for more information and examples.
-
-@item NBD
-QEMU supports NBD (Network Block Devices) both using TCP protocol as well
-as Unix Domain Sockets.
-
-Syntax for specifying a NBD device using TCP
-``nbd:<server-ip>:<port>[:exportname=<export>]''
-
-Syntax for specifying a NBD device using Unix Domain Sockets
-``nbd:unix:<domain-socket>[:exportname=<export>]''
-
-
-Example for TCP
-@example
-qemu-system-i386 --drive file=nbd:192.0.2.1:30000
-@end example
-
-Example for Unix Domain Sockets
-@example
-qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket
-@end example
-
-@item SSH
-QEMU supports SSH (Secure Shell) access to remote disks.
-
-Examples:
-@example
-qemu-system-i386 -drive file=ssh://user@@host/path/to/disk.img
-qemu-system-i386 -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img
-@end example
-
-Currently authentication must be done using ssh-agent. Other
-authentication methods may be supported in future.
-
-@item Sheepdog
-Sheepdog is a distributed storage system for QEMU.
-QEMU supports using either local sheepdog devices or remote networked
-devices.
-
-Syntax for specifying a sheepdog device
-@example
-sheepdog[+tcp|+unix]://[host:port]/vdiname[?socket=path][#snapid|#tag]
-@end example
-
-Example
-@example
-qemu-system-i386 --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine
-@end example
-
-See also @url{https://sheepdog.github.io/sheepdog/}.
-
-@item GlusterFS
-GlusterFS is a user space distributed file system.
-QEMU supports the use of GlusterFS volumes for hosting VM disk images using
-TCP, Unix Domain Sockets and RDMA transport protocols.
-
-Syntax for specifying a VM disk image on GlusterFS volume is
-@example
-
-URI:
-gluster[+type]://[host[:port]]/volume/path[?socket=...][,debug=N][,logfile=...]
-
-JSON:
-'json:@{"driver":"qcow2","file":@{"driver":"gluster","volume":"testvol","path":"a.img","debug":N,"logfile":"...",
-@ "server":[@{"type":"tcp","host":"...","port":"..."@},
-@ @{"type":"unix","socket":"..."@}]@}@}'
-@end example
-
-
-Example
-@example
-URI:
-qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img,
-@ file.debug=9,file.logfile=/var/log/qemu-gluster.log
-
-JSON:
-qemu-system-x86_64 'json:@{"driver":"qcow2",
-@ "file":@{"driver":"gluster",
-@ "volume":"testvol","path":"a.img",
-@ "debug":9,"logfile":"/var/log/qemu-gluster.log",
-@ "server":[@{"type":"tcp","host":"1.2.3.4","port":24007@},
-@ @{"type":"unix","socket":"/var/run/glusterd.socket"@}]@}@}'
-qemu-system-x86_64 -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img,
-@ file.debug=9,file.logfile=/var/log/qemu-gluster.log,
-@ file.server.0.type=tcp,file.server.0.host=1.2.3.4,file.server.0.port=24007,
-@ file.server.1.type=unix,file.server.1.socket=/var/run/glusterd.socket
-@end example
-
-See also @url{http://www.gluster.org}.
-
-@item HTTP/HTTPS/FTP/FTPS
-QEMU supports read-only access to files accessed over http(s) and ftp(s).
-
-Syntax using a single filename:
-@example
-<protocol>://[<username>[:<password>]@@]<host>/<path>
-@end example
-
-where:
-@table @option
-@item protocol
-'http', 'https', 'ftp', or 'ftps'.
-
-@item username
-Optional username for authentication to the remote server.
-
-@item password
-Optional password for authentication to the remote server.
-
-@item host
-Address of the remote server.
-
-@item path
-Path on the remote server, including any query string.
-@end table
-
-The following options are also supported:
-@table @option
-@item url
-The full URL when passing options to the driver explicitly.
-
-@item readahead
-The amount of data to read ahead with each range request to the remote server.
-This value may optionally have the suffix 'T', 'G', 'M', 'K', 'k' or 'b'. If it
-does not have a suffix, it will be assumed to be in bytes. The value must be a
-multiple of 512 bytes. It defaults to 256k.
-
-@item sslverify
-Whether to verify the remote server's certificate when connecting over SSL. It
-can have the value 'on' or 'off'. It defaults to 'on'.
-
-@item cookie
-Send this cookie (it can also be a list of cookies separated by ';') with
-each outgoing request. Only supported when using protocols such as HTTP
-which support cookies, otherwise ignored.
-
-@item timeout
-Set the timeout in seconds of the CURL connection. This timeout is the time
-that CURL waits for a response from the remote server to get the size of the
-image to be downloaded. If not set, the default timeout of 5 seconds is used.
-@end table
-
-Note that when passing options to qemu explicitly, @option{driver} is the value
-of <protocol>.
-
-Example: boot from a remote Fedora 20 live ISO image
-@example
-qemu-system-x86_64 --drive media=cdrom,file=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
-
-qemu-system-x86_64 --drive media=cdrom,file.driver=http,file.url=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
-@end example
-
-Example: boot from a remote Fedora 20 cloud image using a local overlay for
-writes, copy-on-read, and a readahead of 64k
-@example
-qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"http",, "file.url":"https://dl.fedoraproject.org/pub/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"@}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2
-
-qemu-system-x86_64 -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on
-@end example
-
-Example: boot from an image stored on a VMware vSphere server with a self-signed
-certificate using a local overlay for writes, a readahead of 64k and a timeout
-of 10 seconds.
-@example
-qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"https",, "file.url":"https://user:password@@vsphere.example.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k",, "file.timeout":10@}' /tmp/test.qcow2
-
-qemu-system-x86_64 -drive file=/tmp/test.qcow2
-@end example
-ETEXI
-
-STEXI
-@end table
-ETEXI
-
-DEFHEADING(Bluetooth(R) options)
+DEFHEADING(Bluetooth(R) options:)
STEXI
@table @option
ETEXI
DEFHEADING()
#ifdef CONFIG_TPM
-DEFHEADING(TPM device options)
+DEFHEADING(TPM device options:)
DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \
"-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n"
" use path to provide path to a character device; default is /dev/tpm0\n"
" use cancel-path to provide path to TPM's cancel sysfs entry; if\n"
- " not provided it will be searched for in /sys/class/misc/tpm?/device\n",
+ " not provided it will be searched for in /sys/class/misc/tpm?/device\n"
+ "-tpmdev emulator,id=id,chardev=dev\n"
+ " configure the TPM device using chardev backend\n",
QEMU_ARCH_ALL)
STEXI
@item -tpmdev @var{backend} ,id=@var{id} [,@var{options}]
@findex -tpmdev
-Backend type must be:
-@option{passthrough}.
The specific backend type will determine the applicable options.
The @code{-tpmdev} option creates the TPM backend and requires a
@code{-device} option that specifies the TPM frontend interface model.
-Options to each backend are described below.
+Use @code{-tpmdev help} to print all available TPM backend types.
-Use 'help' to print all available TPM backend types.
-@example
-qemu -tpmdev help
-@end example
+@end table
+
+The available backends are:
+
+@table @option
@item -tpmdev passthrough, id=@var{id}, path=@var{path}, cancel-path=@var{cancel-path}
Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
@code{tpmdev=tpm0} in the device option.
-@end table
+@item -tpmdev emulator, id=@var{id}, chardev=@var{dev}
+
+(Linux-host only) Enable access to a TPM emulator using Unix domain socket based
+chardev backend.
+
+@option{chardev} specifies the unique ID of a character device backend that provides connection to the software TPM server.
+
+To create a TPM emulator backend device with chardev socket backend:
+@example
+
+-chardev socket,id=chrtpm,path=/tmp/swtpm-sock -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0
+
+@end example
ETEXI
+STEXI
+@end table
+ETEXI
DEFHEADING()
#endif
-DEFHEADING(Linux/Multiboot boot specific)
+DEFHEADING(Linux/Multiboot boot specific:)
STEXI
When using these options, you can use a given Linux or Multiboot
ETEXI
DEFHEADING()
-DEFHEADING(Debug/Expert options)
+DEFHEADING(Debug/Expert options:)
STEXI
@table @option
ETEXI
ETEXI
DEF("mon", HAS_ARG, QEMU_OPTION_mon, \
- "-mon [chardev=]name[,mode=readline|control]\n", QEMU_ARCH_ALL)
+ "-mon [chardev=]name[,mode=readline|control][,pretty[=on|off]]\n", QEMU_ARCH_ALL)
STEXI
-@item -mon [chardev=]name[,mode=readline|control]
+@item -mon [chardev=]name[,mode=readline|control][,pretty[=on|off]]
@findex -mon
-Setup monitor on chardev @var{name}.
+Setup monitor on chardev @var{name}. @code{pretty} turns on JSON pretty printing
+easing human reading and debugging.
ETEXI
DEF("debugcon", HAS_ARG, QEMU_OPTION_debugcon, \
ETEXI
DEF("watchdog-action", HAS_ARG, QEMU_OPTION_watchdog_action, \
- "-watchdog-action reset|shutdown|poweroff|pause|debug|none\n" \
+ "-watchdog-action reset|shutdown|poweroff|inject-nmi|pause|debug|none\n" \
" action when watchdog fires [default=reset]\n",
QEMU_ARCH_ALL)
STEXI
Other possible actions are:
@code{shutdown} (attempt to gracefully shutdown the guest),
@code{poweroff} (forcefully poweroff the guest),
+@code{inject-nmi} (inject a NMI into the guest),
@code{pause} (pause the guest),
@code{debug} (print a debug message and continue), or
@code{none} (do nothing).
DEF("sandbox", HAS_ARG, QEMU_OPTION_sandbox, \
"-sandbox on[,obsolete=allow|deny][,elevateprivileges=allow|deny|children]\n" \
+ " [,spawn=allow|deny][,resourcecontrol=allow|deny]\n" \
" Enable seccomp mode 2 system call filter (default 'off').\n" \
" use 'obsolete' to allow obsolete system calls that are provided\n" \
" by the kernel, but typically no longer used by modern\n" \
" use 'elevateprivileges' to allow or deny QEMU process to elevate\n" \
" its privileges by blacklisting all set*uid|gid system calls.\n" \
" The value 'children' will deny set*uid|gid system calls for\n" \
- " main QEMU process but will allow forks and execves to run unprivileged\n",
+ " main QEMU process but will allow forks and execves to run unprivileged\n" \
+ " use 'spawn' to avoid QEMU to spawn new threads or processes by\n" \
+ " blacklisting *fork and execve\n" \
+ " use 'resourcecontrol' to disable process affinity and schedular priority\n",
QEMU_ARCH_ALL)
STEXI
-@item -sandbox @var{arg}[,obsolete=@var{string}][,elevateprivileges=@var{string}]
+@item -sandbox @var{arg}[,obsolete=@var{string}][,elevateprivileges=@var{string}][,spawn=@var{string}][,resourcecontrol=@var{string}]
@findex -sandbox
Enable Seccomp mode 2 system call filter. 'on' will enable syscall filtering and 'off' will
disable it. The default is 'off'.
Enable Obsolete system calls
@item elevateprivileges=@var{string}
Disable set*uid|gid system calls
+@item spawn=@var{string}
+Disable *fork and execve
+@item resourcecontrol=@var{string}
+Disable process affinity and schedular priority
@end table
ETEXI
command line and device configuration into file or dash @code{-}) character to print the
output to stdout. This can be later used as input file for @code{-readconfig} option.
ETEXI
-DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig,
- "-nodefconfig\n"
- " do not load default config files at startup\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -nodefconfig
-@findex -nodefconfig
-Normally QEMU loads configuration files from @var{sysconfdir} and @var{datadir} at startup.
-The @code{-nodefconfig} option will prevent QEMU from loading any of those config files.
-ETEXI
+HXCOMM Deprecated, same as -no-user-config
+DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig, "", QEMU_ARCH_ALL)
DEF("no-user-config", 0, QEMU_OPTION_nouserconfig,
"-no-user-config\n"
- " do not load user-provided config files at startup\n",
+ " do not load default user-provided config files at startup\n",
QEMU_ARCH_ALL)
STEXI
@item -no-user-config
@findex -no-user-config
The @code{-no-user-config} option makes QEMU not load any of the user-provided
-config files on @var{sysconfdir}, but won't make it skip the QEMU-provided config
-files from @var{datadir}.
+config files on @var{sysconfdir}.
ETEXI
DEF("trace", HAS_ARG, QEMU_OPTION_trace,
"-trace [[enable=]<pattern>][,events=<file>][,file=<file>]\n"
DEF("no-kvm-pit-reinjection", 0, QEMU_OPTION_no_kvm_pit_reinjection,
"", QEMU_ARCH_I386)
-HXCOMM Deprecated (ignored)
-DEF("no-kvm-pit", 0, QEMU_OPTION_no_kvm_pit, "", QEMU_ARCH_I386)
-
HXCOMM Deprecated by -machine kernel_irqchip=on|off property
DEF("no-kvm-irqchip", 0, QEMU_OPTION_no_kvm_irqchip, "", QEMU_ARCH_I386)
@end table
ETEXI
DEFHEADING()
-DEFHEADING(Generic object creation)
+
+DEFHEADING(Generic object creation:)
STEXI
@table @option
ETEXI
@table @option
-@item -object memory-backend-file,id=@var{id},size=@var{size},mem-path=@var{dir},share=@var{on|off}
+@item -object memory-backend-file,id=@var{id},size=@var{size},mem-path=@var{dir},share=@var{on|off},discard-data=@var{on|off},merge=@var{on|off},dump=@var{on|off},prealloc=@var{on|off},host-nodes=@var{host-nodes},policy=@var{default|preferred|bind|interleave},align=@var{align}
Creates a memory file backend object, which can be used to back
-the guest RAM with huge pages. The @option{id} parameter is a
-unique ID that will be used to reference this memory region
-when configuring the @option{-numa} argument. The @option{size}
-option provides the size of the memory region, and accepts
-common suffixes, eg @option{500M}. The @option{mem-path} provides
-the path to either a shared memory or huge page filesystem mount.
+the guest RAM with huge pages.
+
+The @option{id} parameter is a unique ID that will be used to reference this
+memory region when configuring the @option{-numa} argument.
+
+The @option{size} option provides the size of the memory region, and accepts
+common suffixes, eg @option{500M}.
+
+The @option{mem-path} provides the path to either a shared memory or huge page
+filesystem mount.
+
The @option{share} boolean option determines whether the memory
region is marked as private to QEMU, or shared. The latter allows
a co-operating external process to access the QEMU memory region.
+Setting the @option{discard-data} boolean option to @var{on}
+indicates that file contents can be destroyed when QEMU exits,
+to avoid unnecessarily flushing data to the backing file. Note
+that @option{discard-data} is only an optimization, and QEMU
+might not discard file contents if it aborts unexpectedly or is
+terminated using SIGKILL.
+
+The @option{merge} boolean option enables memory merge, also known as
+MADV_MERGEABLE, so that Kernel Samepage Merging will consider the pages for
+memory deduplication.
+
+Setting the @option{dump} boolean option to @var{off} excludes the memory from
+core dumps. This feature is also known as MADV_DONTDUMP.
+
+The @option{prealloc} boolean option enables memory preallocation.
+
+The @option{host-nodes} option binds the memory range to a list of NUMA host
+nodes.
+
+The @option{policy} option sets the NUMA policy to one of the following values:
+
+@table @option
+@item @var{default}
+default host policy
+
+@item @var{preferred}
+prefer the given host node list for allocation
+
+@item @var{bind}
+restrict memory allocation to the given host node list
+
+@item @var{interleave}
+interleave memory allocations across the given host node list
+@end table
+
+The @option{align} option specifies the base address alignment when
+QEMU mmap(2) @option{mem-path}, and accepts common suffixes, eg
+@option{2M}. Some backend store specified by @option{mem-path}
+requires an alignment different than the default one used by QEMU, eg
+the device DAX /dev/dax0.0 requires 2M alignment rather than 4K. In
+such cases, users can specify the required alignment via this option.
+
+@item -object memory-backend-ram,id=@var{id},merge=@var{on|off},dump=@var{on|off},prealloc=@var{on|off},size=@var{size},host-nodes=@var{host-nodes},policy=@var{default|preferred|bind|interleave}
+
+Creates a memory backend object, which can be used to back the guest RAM.
+Memory backend objects offer more control than the @option{-m} option that is
+traditionally used to define guest RAM. Please refer to
+@option{memory-backend-file} for a description of the options.
+
@item -object rng-random,id=@var{id},filename=@var{/dev/random}
Creates a random number generator backend which obtains entropy from
projects / qemu.git / blobdiff