+static bool have_guest_debug;
+
+/*
+ * Although the ARM implementation of hardware assisted debugging
+ * allows for different breakpoints per-core, the current GDB
+ * interface treats them as a global pool of registers (which seems to
+ * be the case for x86, ppc and s390). As a result we store one copy
+ * of registers which is used for all active cores.
+ *
+ * Write access is serialised by virtue of the GDB protocol which
+ * updates things. Read access (i.e. when the values are copied to the
+ * vCPU) is also gated by GDB's run control.
+ *
+ * This is not unreasonable as most of the time debugging kernels you
+ * never know which core will eventually execute your function.
+ */
+
+typedef struct {
+ uint64_t bcr;
+ uint64_t bvr;
+} HWBreakpoint;
+
+/* The watchpoint registers can cover more area than the requested
+ * watchpoint so we need to store the additional information
+ * somewhere. We also need to supply a CPUWatchpoint to the GDB stub
+ * when the watchpoint is hit.
+ */
+typedef struct {
+ uint64_t wcr;
+ uint64_t wvr;
+ CPUWatchpoint details;
+} HWWatchpoint;
+
+/* Maximum and current break/watch point counts */
+int max_hw_bps, max_hw_wps;
+GArray *hw_breakpoints, *hw_watchpoints;
+
+#define cur_hw_wps (hw_watchpoints->len)
+#define cur_hw_bps (hw_breakpoints->len)
+#define get_hw_bp(i) (&g_array_index(hw_breakpoints, HWBreakpoint, i))
+#define get_hw_wp(i) (&g_array_index(hw_watchpoints, HWWatchpoint, i))
+
+/**
+ * kvm_arm_init_debug() - check for guest debug capabilities
+ * @cs: CPUState
+ *
+ * kvm_check_extension returns the number of debug registers we have
+ * or 0 if we have none.
+ *
+ */
+static void kvm_arm_init_debug(CPUState *cs)
+{
+ have_guest_debug = kvm_check_extension(cs->kvm_state,
+ KVM_CAP_SET_GUEST_DEBUG);
+
+ max_hw_wps = kvm_check_extension(cs->kvm_state, KVM_CAP_GUEST_DEBUG_HW_WPS);
+ hw_watchpoints = g_array_sized_new(true, true,
+ sizeof(HWWatchpoint), max_hw_wps);
+
+ max_hw_bps = kvm_check_extension(cs->kvm_state, KVM_CAP_GUEST_DEBUG_HW_BPS);
+ hw_breakpoints = g_array_sized_new(true, true,
+ sizeof(HWBreakpoint), max_hw_bps);
+ return;
+}
+
+/**
+ * insert_hw_breakpoint()
+ * @addr: address of breakpoint
+ *
+ * See ARM ARM D2.9.1 for details but here we are only going to create
+ * simple un-linked breakpoints (i.e. we don't chain breakpoints
+ * together to match address and context or vmid). The hardware is
+ * capable of fancier matching but that will require exposing that
+ * fanciness to GDB's interface
+ *
+ * D7.3.2 DBGBCR<n>_EL1, Debug Breakpoint Control Registers
+ *
+ * 31 24 23 20 19 16 15 14 13 12 9 8 5 4 3 2 1 0
+ * +------+------+-------+-----+----+------+-----+------+-----+---+
+ * | RES0 | BT | LBN | SSC | HMC| RES0 | BAS | RES0 | PMC | E |
+ * +------+------+-------+-----+----+------+-----+------+-----+---+
+ *
+ * BT: Breakpoint type (0 = unlinked address match)
+ * LBN: Linked BP number (0 = unused)
+ * SSC/HMC/PMC: Security, Higher and Priv access control (Table D-12)
+ * BAS: Byte Address Select (RES1 for AArch64)
+ * E: Enable bit
+ */
+static int insert_hw_breakpoint(target_ulong addr)
+{
+ HWBreakpoint brk = {
+ .bcr = 0x1, /* BCR E=1, enable */
+ .bvr = addr
+ };
+
+ if (cur_hw_bps >= max_hw_bps) {
+ return -ENOBUFS;
+ }
+
+ brk.bcr = deposit32(brk.bcr, 1, 2, 0x3); /* PMC = 11 */
+ brk.bcr = deposit32(brk.bcr, 5, 4, 0xf); /* BAS = RES1 */
+
+ g_array_append_val(hw_breakpoints, brk);
+
+ return 0;
+}
+
+/**
+ * delete_hw_breakpoint()
+ * @pc: address of breakpoint
+ *
+ * Delete a breakpoint and shuffle any above down
+ */
+
+static int delete_hw_breakpoint(target_ulong pc)
+{
+ int i;
+ for (i = 0; i < hw_breakpoints->len; i++) {
+ HWBreakpoint *brk = get_hw_bp(i);
+ if (brk->bvr == pc) {
+ g_array_remove_index(hw_breakpoints, i);
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+
+/**
+ * insert_hw_watchpoint()
+ * @addr: address of watch point
+ * @len: size of area
+ * @type: type of watch point
+ *
+ * See ARM ARM D2.10. As with the breakpoints we can do some advanced
+ * stuff if we want to. The watch points can be linked with the break
+ * points above to make them context aware. However for simplicity
+ * currently we only deal with simple read/write watch points.
+ *
+ * D7.3.11 DBGWCR<n>_EL1, Debug Watchpoint Control Registers
+ *
+ * 31 29 28 24 23 21 20 19 16 15 14 13 12 5 4 3 2 1 0
+ * +------+-------+------+----+-----+-----+-----+-----+-----+-----+---+
+ * | RES0 | MASK | RES0 | WT | LBN | SSC | HMC | BAS | LSC | PAC | E |
+ * +------+-------+------+----+-----+-----+-----+-----+-----+-----+---+
+ *
+ * MASK: num bits addr mask (0=none,01/10=res,11=3 bits (8 bytes))
+ * WT: 0 - unlinked, 1 - linked (not currently used)
+ * LBN: Linked BP number (not currently used)
+ * SSC/HMC/PAC: Security, Higher and Priv access control (Table D2-11)
+ * BAS: Byte Address Select
+ * LSC: Load/Store control (01: load, 10: store, 11: both)
+ * E: Enable
+ *
+ * The bottom 2 bits of the value register are masked. Therefore to
+ * break on any sizes smaller than an unaligned word you need to set
+ * MASK=0, BAS=bit per byte in question. For larger regions (^2) you
+ * need to ensure you mask the address as required and set BAS=0xff
+ */
+
+static int insert_hw_watchpoint(target_ulong addr,
+ target_ulong len, int type)
+{
+ HWWatchpoint wp = {
+ .wcr = 1, /* E=1, enable */
+ .wvr = addr & (~0x7ULL),
+ .details = { .vaddr = addr, .len = len }
+ };
+
+ if (cur_hw_wps >= max_hw_wps) {
+ return -ENOBUFS;
+ }
+
+ /*
+ * HMC=0 SSC=0 PAC=3 will hit EL0 or EL1, any security state,
+ * valid whether EL3 is implemented or not
+ */
+ wp.wcr = deposit32(wp.wcr, 1, 2, 3);
+
+ switch (type) {
+ case GDB_WATCHPOINT_READ:
+ wp.wcr = deposit32(wp.wcr, 3, 2, 1);
+ wp.details.flags = BP_MEM_READ;
+ break;
+ case GDB_WATCHPOINT_WRITE:
+ wp.wcr = deposit32(wp.wcr, 3, 2, 2);
+ wp.details.flags = BP_MEM_WRITE;
+ break;
+ case GDB_WATCHPOINT_ACCESS:
+ wp.wcr = deposit32(wp.wcr, 3, 2, 3);
+ wp.details.flags = BP_MEM_ACCESS;
+ break;
+ default:
+ g_assert_not_reached();
+ break;
+ }
+ if (len <= 8) {
+ /* we align the address and set the bits in BAS */
+ int off = addr & 0x7;
+ int bas = (1 << len) - 1;
+
+ wp.wcr = deposit32(wp.wcr, 5 + off, 8 - off, bas);
+ } else {
+ /* For ranges above 8 bytes we need to be a power of 2 */
+ if (is_power_of_2(len)) {
+ int bits = ctz64(len);
+
+ wp.wvr &= ~((1 << bits) - 1);
+ wp.wcr = deposit32(wp.wcr, 24, 4, bits);
+ wp.wcr = deposit32(wp.wcr, 5, 8, 0xff);
+ } else {
+ return -ENOBUFS;
+ }
+ }
+
+ g_array_append_val(hw_watchpoints, wp);
+ return 0;
+}
+
+
+static bool check_watchpoint_in_range(int i, target_ulong addr)
+{
+ HWWatchpoint *wp = get_hw_wp(i);
+ uint64_t addr_top, addr_bottom = wp->wvr;
+ int bas = extract32(wp->wcr, 5, 8);
+ int mask = extract32(wp->wcr, 24, 4);
+
+ if (mask) {
+ addr_top = addr_bottom + (1 << mask);
+ } else {
+ /* BAS must be contiguous but can offset against the base
+ * address in DBGWVR */
+ addr_bottom = addr_bottom + ctz32(bas);
+ addr_top = addr_bottom + clo32(bas);
+ }
+
+ if (addr >= addr_bottom && addr <= addr_top) {
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * delete_hw_watchpoint()
+ * @addr: address of breakpoint
+ *
+ * Delete a breakpoint and shuffle any above down
+ */
+
+static int delete_hw_watchpoint(target_ulong addr,
+ target_ulong len, int type)
+{
+ int i;
+ for (i = 0; i < cur_hw_wps; i++) {
+ if (check_watchpoint_in_range(i, addr)) {
+ g_array_remove_index(hw_watchpoints, i);
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+
+
+int kvm_arch_insert_hw_breakpoint(target_ulong addr,
+ target_ulong len, int type)
+{
+ switch (type) {
+ case GDB_BREAKPOINT_HW:
+ return insert_hw_breakpoint(addr);
+ break;
+ case GDB_WATCHPOINT_READ:
+ case GDB_WATCHPOINT_WRITE:
+ case GDB_WATCHPOINT_ACCESS:
+ return insert_hw_watchpoint(addr, len, type);
+ default:
+ return -ENOSYS;
+ }
+}
+
+int kvm_arch_remove_hw_breakpoint(target_ulong addr,
+ target_ulong len, int type)
+{
+ switch (type) {
+ case GDB_BREAKPOINT_HW:
+ return delete_hw_breakpoint(addr);
+ break;
+ case GDB_WATCHPOINT_READ:
+ case GDB_WATCHPOINT_WRITE:
+ case GDB_WATCHPOINT_ACCESS:
+ return delete_hw_watchpoint(addr, len, type);
+ default:
+ return -ENOSYS;
+ }
+}
+
+
+void kvm_arch_remove_all_hw_breakpoints(void)
+{
+ if (cur_hw_wps > 0) {
+ g_array_remove_range(hw_watchpoints, 0, cur_hw_wps);
+ }
+ if (cur_hw_bps > 0) {
+ g_array_remove_range(hw_breakpoints, 0, cur_hw_bps);
+ }
+}
+
+void kvm_arm_copy_hw_debug_data(struct kvm_guest_debug_arch *ptr)
+{
+ int i;
+ memset(ptr, 0, sizeof(struct kvm_guest_debug_arch));
+
+ for (i = 0; i < max_hw_wps; i++) {
+ HWWatchpoint *wp = get_hw_wp(i);
+ ptr->dbg_wcr[i] = wp->wcr;
+ ptr->dbg_wvr[i] = wp->wvr;
+ }
+ for (i = 0; i < max_hw_bps; i++) {
+ HWBreakpoint *bp = get_hw_bp(i);
+ ptr->dbg_bcr[i] = bp->bcr;
+ ptr->dbg_bvr[i] = bp->bvr;
+ }
+}
+
+bool kvm_arm_hw_debug_active(CPUState *cs)
+{
+ return ((cur_hw_wps > 0) || (cur_hw_bps > 0));
+}
+
+static bool find_hw_breakpoint(CPUState *cpu, target_ulong pc)
+{
+ int i;
+
+ for (i = 0; i < cur_hw_bps; i++) {
+ HWBreakpoint *bp = get_hw_bp(i);
+ if (bp->bvr == pc) {
+ return true;
+ }
+ }
+ return false;
+}
+
+static CPUWatchpoint *find_hw_watchpoint(CPUState *cpu, target_ulong addr)
+{
+ int i;
+
+ for (i = 0; i < cur_hw_wps; i++) {
+ if (check_watchpoint_in_range(i, addr)) {
+ return &get_hw_wp(i)->details;
+ }
+ }
+ return NULL;
+}
+
+
projects / qemu.git / blobdiff