-vgabios_variants := stdvga cirrus vmware qxl
-pxerom_variants := e1000 eepro100 ne2k_pci pcnet rtl8139 virtio
+vgabios_variants := stdvga cirrus vmware qxl isavga virtio
+vgabios_targets := $(subst -isavga,,$(patsubst %,vgabios-%.bin,$(vgabios_variants)))
+pxerom_variants := e1000 e1000e eepro100 ne2k_pci pcnet rtl8139 virtio vmxnet3
+pxerom_targets := 8086100e 808610d3 80861209 10500940 10222000 10ec8139 1af41000 15ad07b0
pxe-rom-e1000 efi-rom-e1000 : VID := 8086
pxe-rom-e1000 efi-rom-e1000 : DID := 100e
+pxe-rom-e1000e efi-rom-e1000e : VID := 8086
+pxe-rom-e1000e efi-rom-e1000e : DID := 10d3
pxe-rom-eepro100 efi-rom-eepro100 : VID := 8086
pxe-rom-eepro100 efi-rom-eepro100 : DID := 1209
pxe-rom-ne2k_pci efi-rom-ne2k_pci : VID := 1050
pxe-rom-rtl8139 efi-rom-rtl8139 : DID := 8139
pxe-rom-virtio efi-rom-virtio : VID := 1af4
pxe-rom-virtio efi-rom-virtio : DID := 1000
+pxe-rom-vmxnet3 efi-rom-vmxnet3 : VID := 15ad
+pxe-rom-vmxnet3 efi-rom-vmxnet3 : DID := 07b0
+
+#
+# cross compiler auto detection
+#
+path := $(subst :, ,$(PATH))
+system := $(shell uname -s | tr "A-Z" "a-z")
+
+# first find cross binutils in path
+find-cross-ld = $(firstword $(wildcard $(patsubst %,%/$(1)-*$(system)*-ld,$(path))))
+# then check we have cross gcc too
+find-cross-gcc = $(firstword $(wildcard $(patsubst %ld,%gcc,$(call find-cross-ld,$(1)))))
+# finally strip off path + toolname so we get the prefix
+find-cross-prefix = $(subst gcc,,$(notdir $(call find-cross-gcc,$(1))))
+
+powerpc64_cross_prefix := $(call find-cross-prefix,powerpc64)
+powerpc_cross_prefix := $(call find-cross-prefix,powerpc)
+x86_64_cross_prefix := $(call find-cross-prefix,x86_64)
+
+# tag our seabios builds
+SEABIOS_EXTRAVERSION="-prebuilt.qemu-project.org"
#
# EfiRom utility is shipped with edk2 / tianocore, in BaseTools/
@echo " bios -- update bios.bin (seabios)"
@echo " seavgabios -- update vgabios binaries (seabios)"
@echo " lgplvgabios -- update vgabios binaries (lgpl)"
+ @echo " sgabios -- update sgabios binaries"
@echo " pxerom -- update nic roms (bios only)"
@echo " efirom -- update nic roms (bios+efi, this needs"
@echo " the EfiRom utility from edk2 / tianocore)"
+ @echo " slof -- update slof.bin"
+ @echo " skiboot -- update skiboot.lid"
+ @echo " u-boot.e500 -- update u-boot.e500"
-bios: config.seabios
- sh configure-seabios.sh $<
- make -C seabios out/bios.bin
- cp seabios/out/bios.bin ../pc-bios/bios.bin
- cp seabios/out/*dsdt.aml ../pc-bios/
+bios: build-seabios-config-seabios-128k build-seabios-config-seabios-256k
+ cp seabios/builds/seabios-128k/bios.bin ../pc-bios/bios.bin
+ cp seabios/builds/seabios-256k/bios.bin ../pc-bios/bios-256k.bin
seavgabios: $(patsubst %,seavgabios-%,$(vgabios_variants))
-seavgabios-%: config.vga.%
- sh configure-seabios.sh $<
- make -C seabios out/vgabios.bin
- cp seabios/out/vgabios.bin ../pc-bios/vgabios-$*.bin
+seavgabios-isavga: build-seabios-config-vga-isavga
+ cp seabios/builds/vga-isavga/vgabios.bin ../pc-bios/vgabios.bin
+
+seavgabios-%: build-seabios-config-vga-%
+ cp seabios/builds/vga-$*/vgabios.bin ../pc-bios/vgabios-$*.bin
+
+build-seabios-config-%: config.%
+ mkdir -p seabios/builds/$*
+ cp $< seabios/builds/$*/.config
+ $(MAKE) -C seabios \
+ EXTRAVERSION=$(SEABIOS_EXTRAVERSION) \
+ CROSS_COMPILE=$(x86_64_cross_prefix) \
+ KCONFIG_CONFIG=$(CURDIR)/seabios/builds/$*/.config \
+ OUT=$(CURDIR)/seabios/builds/$*/ oldnoconfig
+ $(MAKE) -C seabios \
+ EXTRAVERSION=$(SEABIOS_EXTRAVERSION) \
+ CROSS_COMPILE=$(x86_64_cross_prefix) \
+ KCONFIG_CONFIG=$(CURDIR)/seabios/builds/$*/.config \
+ OUT=$(CURDIR)/seabios/builds/$*/ all
+
lgplvgabios: $(patsubst %,lgplvgabios-%,$(vgabios_variants))
-lgplvgabios-%:
- make -C vgabios vgabios-$*.bin
+lgplvgabios-isavga: build-lgplvgabios
+ cp vgabios/VGABIOS-lgpl-latest.bin ../pc-bios/vgabios.bin
+lgplvgabios-%: build-lgplvgabios
cp vgabios/VGABIOS-lgpl-latest.$*.bin ../pc-bios/vgabios-$*.bin
+build-lgplvgabios:
+ $(MAKE) -C vgabios $(vgabios_targets)
+
+
+.PHONY: sgabios skiboot
+sgabios:
+ $(MAKE) -C sgabios
+ cp sgabios/sgabios.bin ../pc-bios
+
+
pxerom: $(patsubst %,pxe-rom-%,$(pxerom_variants))
-pxe-rom-%: ipxe/src/config/local/general.h
- make -C ipxe/src bin/$(VID)$(DID).rom
+pxe-rom-%: build-pxe-roms
cp ipxe/src/bin/$(VID)$(DID).rom ../pc-bios/pxe-$*.rom
efirom: $(patsubst %,efi-rom-%,$(pxerom_variants))
-efi-rom-%: ipxe/src/config/local/general.h
- make -C ipxe/src bin/$(VID)$(DID).rom
- make -C ipxe/src bin-i386-efi/$(VID)$(DID).efidrv
- make -C ipxe/src bin-x86_64-efi/$(VID)$(DID).efidrv
+efi-rom-%: build-pxe-roms build-efi-roms
$(EFIROM) -f "0x$(VID)" -i "0x$(DID)" -l 0x02 \
-b ipxe/src/bin/$(VID)$(DID).rom \
-ec ipxe/src/bin-i386-efi/$(VID)$(DID).efidrv \
-ec ipxe/src/bin-x86_64-efi/$(VID)$(DID).efidrv \
-o ../pc-bios/efi-$*.rom
-ipxe/src/config/local/%: config.ipxe.%
- cp $< $@
+build-pxe-roms:
+ $(MAKE) -C ipxe/src CONFIG=qemu \
+ CROSS_COMPILE=$(x86_64_cross_prefix) \
+ $(patsubst %,bin/%.rom,$(pxerom_targets))
+
+build-efi-roms: build-pxe-roms
+ $(MAKE) -C ipxe/src CONFIG=qemu \
+ CROSS_COMPILE=$(x86_64_cross_prefix) \
+ $(patsubst %,bin-i386-efi/%.efidrv,$(pxerom_targets)) \
+ $(patsubst %,bin-x86_64-efi/%.efidrv,$(pxerom_targets))
+
+
+slof:
+ $(MAKE) -C SLOF CROSS=$(powerpc64_cross_prefix) qemu
+ cp SLOF/boot_rom.bin ../pc-bios/slof.bin
+
+u-boot.e500:
+ $(MAKE) -C u-boot O=build.e500 qemu-ppce500_config
+ $(MAKE) -C u-boot CROSS_COMPILE=$(powerpc_cross_prefix) \
+ O=build.e500
+ $(powerpc_cross_prefix)strip u-boot/build.e500/u-boot -o \
+ ../pc-bios/u-boot.e500
+skiboot:
+ $(MAKE) -C skiboot CROSS=$(powerpc64_cross_prefix)
+ cp skiboot/skiboot.lid ../pc-bios/skiboot.lid
clean:
- rm -rf seabios/.config seabios/out
- $(MAKE) $(MAKEFLAGS) -C vgabios clean
+ rm -rf seabios/.config seabios/out seabios/builds
+ $(MAKE) -C vgabios clean
rm -f vgabios/VGABIOS-lgpl-latest*
- $(MAKE) $(MAKEFLAGS) -C ipxe/src veryclean
+ $(MAKE) -C sgabios clean
+ rm -f sgabios/.depend
+ $(MAKE) -C ipxe/src veryclean
+ $(MAKE) -C SLOF clean
+ rm -rf u-boot/build.e500
+ $(MAKE) -C skiboot clean
projects / qemu.git / blobdiff