ETEXI
DEF("m", HAS_ARG, QEMU_OPTION_m,
- "-m megs set virtual RAM size to megs MB [default="
- stringify(DEFAULT_RAM_SIZE) "]\n", QEMU_ARCH_ALL)
+ "-m [size=]megs\n"
+ " configure guest RAM\n"
+ " size: initial amount of guest memory (default: "
+ stringify(DEFAULT_RAM_SIZE) "MiB)\n",
+ QEMU_ARCH_ALL)
STEXI
-@item -m @var{megs}
+@item -m [size=]@var{megs}
@findex -m
Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB. Optionally,
a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or
ETEXI
DEF("name", HAS_ARG, QEMU_OPTION_name,
- "-name string1[,process=string2]\n"
+ "-name string1[,process=string2][,debug-threads=on|off]\n"
" set the name of the guest\n"
- " string1 sets the window title and string2 the process name (on Linux)\n",
+ " string1 sets the window title and string2 the process name (on Linux)\n"
+ " When debug-threads is enabled, individual threads are given a separate name (on Linux)\n"
+ " NOTE: The thread names are for debugging and not a stable API.\n",
QEMU_ARCH_ALL)
STEXI
@item -name @var{name}
This name will be displayed in the SDL window caption.
The @var{name} will also be used for the VNC server.
Also optionally set the top visible process name in Linux.
+Naming of individual threads can also be enabled on Linux to aid debugging.
ETEXI
DEF("uuid", HAS_ARG, QEMU_OPTION_uuid,
"-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
" [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
" [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
- " [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
+ " [,serial=s][,addr=A][,rerror=ignore|stop|report]\n"
+ " [,werror=ignore|stop|report|enospc][,id=name][,aio=threads|native]\n"
" [,readonly=on|off][,copy-on-read=on|off]\n"
+ " [,detect-zeroes=on|off|unmap]\n"
" [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]]\n"
" [[,iops=i]|[[,iops_rd=r][,iops_wr=w]]]\n"
" [[,bps_max=bm]|[[,bps_rd_max=rm][,bps_wr_max=wm]]]\n"
@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
These options have the same definition as they have in @option{-hdachs}.
@item snapshot=@var{snapshot}
-@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
+@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive
+(see @option{-snapshot}).
@item cache=@var{cache}
@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
@item aio=@var{aio}
@item copy-on-read=@var{copy-on-read}
@var{copy-on-read} is "on" or "off" and enables whether to copy read backing
file sectors into the image file.
+@item detect-zeroes=@var{detect-zeroes}
+@var{detect-zeroes} is "off", "on" or "unmap" and enables the automatic
+conversion of plain zero writes by the OS to driver specific optimized
+zero write commands. You may even choose "unmap" if @var{discard} is set
+to "unmap" to allow a zero write to be converted to an UNMAP operation.
@end table
By default, the @option{cache=writeback} mode is used. It will report data
DEF("display", HAS_ARG, QEMU_OPTION_display,
"-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]\n"
" [,window_close=on|off]|curses|none|\n"
+ " gtk[,grab_on_hover=on|off]|\n"
" vnc=<display>[,<optargs>]\n"
" select display type\n", QEMU_ARCH_ALL)
STEXI
user. This option differs from the -nographic option in that it
only affects what is done with video output; -nographic also changes
the destination of the serial and parallel port data.
+@item gtk
+Display video output in a GTK window. This interface provides drop-down
+menus and other UI elements to configure and control the VM during
+runtime.
@item vnc
Start a VNC server on display <arg>
@end table
ETEXI
DEF("vga", HAS_ARG, QEMU_OPTION_vga,
- "-vga [std|cirrus|vmware|qxl|xenfb|none]\n"
+ "-vga [std|cirrus|vmware|qxl|xenfb|tcx|cg3|none]\n"
" select video card type\n", QEMU_ARCH_ALL)
STEXI
@item -vga @var{type}
QXL paravirtual graphic card. It is VGA compatible (including VESA
2.0 VBE support). Works best with qxl guest drivers installed though.
Recommended choice when using the spice protocol.
+@item tcx
+(sun4m only) Sun TCX framebuffer. This is the default framebuffer for
+sun4m machines and offers both 8-bit and 24-bit colour depths at a
+fixed resolution of 1024x768.
+@item cg3
+(sun4m only) Sun cgthree framebuffer. This is a simple 8-bit framebuffer
+for sun4m machines available in both 1024x768 (OpenBIOS) and 1152x900 (OBP)
+resolutions aimed at people wishing to run older Solaris versions.
@item none
Disable VGA card.
@end table
An adaptive encoding will try to detect frequently updated screen regions,
and send updates in these regions using a lossy encoding (like JPEG).
This can be really helpful to save bandwidth when playing videos. Disabling
-adaptive encodings allows to restore the original static behavior of encodings
+adaptive encodings restores the original static behavior of encodings
like Tight.
@item share=[allow-exclusive|force-shared|ignore]
DEF("smbios", HAS_ARG, QEMU_OPTION_smbios,
"-smbios file=binary\n"
" load SMBIOS entry from binary file\n"
- "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]\n"
+ "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d][,uefi=on|off]\n"
" specify SMBIOS type 0 fields\n"
"-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]\n"
" [,uuid=uuid][,sku=str][,family=str]\n"
@findex -smbios
Load SMBIOS entry from binary file.
-@item -smbios type=0[,vendor=@var{str}][,version=@var{str}][,date=@var{str}][,release=@var{%d.%d}]
+@item -smbios type=0[,vendor=@var{str}][,version=@var{str}][,date=@var{str}][,release=@var{%d.%d}][,uefi=on|off]
Specify SMBIOS type 0 fields
@item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}] [,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}] [,family=@var{str}]
@end example
See also @url{http://www.gluster.org}.
+
+@item HTTP/HTTPS/FTP/FTPS/TFTP
+QEMU supports read-only access to files accessed over http(s), ftp(s) and tftp.
+
+Syntax using a single filename:
+@example
+<protocol>://[<username>[:<password>]@@]<host>/<path>
+@end example
+
+where:
+@table @option
+@item protocol
+'http', 'https', 'ftp', 'ftps', or 'tftp'.
+
+@item username
+Optional username for authentication to the remote server.
+
+@item password
+Optional password for authentication to the remote server.
+
+@item host
+Address of the remote server.
+
+@item path
+Path on the remote server, including any query string.
+@end table
+
+The following options are also supported:
+@table @option
+@item url
+The full URL when passing options to the driver explicitly.
+
+@item readahead
+The amount of data to read ahead with each range request to the remote server.
+This value may optionally have the suffix 'T', 'G', 'M', 'K', 'k' or 'b'. If it
+does not have a suffix, it will be assumed to be in bytes. The value must be a
+multiple of 512 bytes. It defaults to 256k.
+
+@item sslverify
+Whether to verify the remote server's certificate when connecting over SSL. It
+can have the value 'on' or 'off'. It defaults to 'on'.
+@end table
+
+Note that when passing options to qemu explicitly, @option{driver} is the value
+of <protocol>.
+
+Example: boot from a remote Fedora 20 live ISO image
+@example
+qemu-system-x86_64 --drive media=cdrom,file=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
+
+qemu-system-x86_64 --drive media=cdrom,file.driver=http,file.url=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly
+@end example
+
+Example: boot from a remote Fedora 20 cloud image using a local overlay for
+writes, copy-on-read, and a readahead of 64k
+@example
+qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"http",, "file.url":"https://dl.fedoraproject.org/pub/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"@}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2
+
+qemu-system-x86_64 -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on
+@end example
+
+Example: boot from an image stored on a VMware vSphere server with a self-signed
+certificate using a local overlay for writes and a readahead of 64k
+@example
+qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"https",, "file.url":"https://user:password@@vsphere.example.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k"@}' /tmp/test.qcow2
+
+qemu-system-x86_64 -drive file=/tmp/test.qcow2
+@end example
ETEXI
STEXI
MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the
format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC.
-By default the RTC is driven by the host system time. This allows to use the
+By default the RTC is driven by the host system time. This allows using of the
RTC as accurate reference clock inside the guest, specifically if the host
time is smoothly following an accurate external reference clock, e.g. via NTP.
If you want to isolate the guest time from the host, you can set @option{clock}
Set OpenBIOS nvram @var{variable} to given @var{value} (PPC, SPARC only).
ETEXI
DEF("semihosting", 0, QEMU_OPTION_semihosting,
- "-semihosting semihosting mode\n", QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA)
+ "-semihosting semihosting mode\n",
+ QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32)
STEXI
@item -semihosting
@findex -semihosting
projects / qemu.git / blobdiff