hw/arm/virt: Provide a secure-only RAM if booting in Secure mode

[qemu.git] / Makefile.target

diff --git a/Makefile.target b/Makefile.target
index 998604754507f3e62b1881658e81924bf789c265..34ddb7e76262d1a1efc0e783ebe0a138a24ab31b 100644 (file)
--- a/Makefile.target
+++ b/Makefile.target
@@ -1,11 +1,13 @@
 # -*- Mode: makefile -*-
 
+BUILD_DIR?=$(CURDIR)/..
+
 include ../config-host.mak
 include config-target.mak
 include config-devices.mak
 include $(SRC_PATH)/rules.mak
 
-$(call set-vpath, $(SRC_PATH))
+$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
 ifdef CONFIG_LINUX
 QEMU_CFLAGS += -I../linux-headers
 endif
@@ -38,7 +40,7 @@ config-target.h: config-target.h-timestamp
 config-target.h-timestamp: config-target.mak
 
 ifdef CONFIG_TRACE_SYSTEMTAP
-stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp
+stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp
 
 ifdef CONFIG_USER_ONLY
 TARGET_TYPE=user
@@ -49,7 +51,7 @@ endif
 $(QEMU_PROG).stp-installed: $(SRC_PATH)/trace-events
        $(call quiet-command,$(TRACETOOL) \
                --format=stap \
-               --backend=$(TRACE_BACKEND) \
+               --backends=$(TRACE_BACKENDS) \
                --binary=$(bindir)/$(QEMU_PROG) \
                --target-name=$(TARGET_NAME) \
                --target-type=$(TARGET_TYPE) \
@@ -58,12 +60,19 @@ $(QEMU_PROG).stp-installed: $(SRC_PATH)/trace-events
 $(QEMU_PROG).stp: $(SRC_PATH)/trace-events
        $(call quiet-command,$(TRACETOOL) \
                --format=stap \
-               --backend=$(TRACE_BACKEND) \
+               --backends=$(TRACE_BACKENDS) \
                --binary=$(realpath .)/$(QEMU_PROG) \
                --target-name=$(TARGET_NAME) \
                --target-type=$(TARGET_TYPE) \
                < $< > $@,"  GEN   $(TARGET_DIR)$(QEMU_PROG).stp")
 
+$(QEMU_PROG)-simpletrace.stp: $(SRC_PATH)/trace-events
+       $(call quiet-command,$(TRACETOOL) \
+               --format=simpletrace-stap \
+               --backends=$(TRACE_BACKENDS) \
+               --probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
+               < $< > $@,"  GEN   $(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
+
 else
 stap:
 endif
@@ -76,8 +85,11 @@ all: $(PROGS) stap
 #########################################################
 # cpu emulator library
 obj-y = exec.o translate-all.o cpu-exec.o
-obj-y += tcg/tcg.o tcg/optimize.o
+obj-y += translate-common.o
+obj-y += cpu-exec-common.o
+obj-y += tcg/tcg.o tcg/tcg-op.o tcg/optimize.o
 obj-$(CONFIG_TCG_INTERPRETER) += tci.o
+obj-y += tcg/tcg-common.o
 obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
 obj-y += fpu/softfloat.o
 obj-y += target-$(TARGET_BASE_ARCH)/
@@ -85,6 +97,12 @@ obj-y += disas.o
 obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
 obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
 
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decContext.o
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decNumber.o
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal32.o
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal64.o
+obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal128.o
+
 #########################################################
 # Linux user emulator target
 
@@ -102,7 +120,8 @@ endif #CONFIG_LINUX_USER
 
 ifdef CONFIG_BSD_USER
 
-QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR)
+QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
+                        -I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
 
 obj-y += bsd-user/
 obj-y += gdbstub.o user-exec.o
@@ -112,15 +131,15 @@ endif #CONFIG_BSD_USER
 #########################################################
 # System emulator target
 ifdef CONFIG_SOFTMMU
-obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o
-obj-y += qtest.o
+obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
+obj-y += qtest.o bootdevice.o
 obj-y += hw/
-obj-$(CONFIG_FDT) += device_tree.o
 obj-$(CONFIG_KVM) += kvm-all.o
-obj-y += memory.o savevm.o cputlb.o
+obj-y += memory.o cputlb.o
 obj-y += memory_mapping.o
 obj-y += dump.o
-LIBS+=$(libs_softmmu)
+obj-y += migration/ram.o migration/savevm.o
+LIBS := $(libs_softmmu) $(LIBS)
 
 # xen support
 obj-$(CONFIG_XEN) += xen-common.o
@@ -135,7 +154,7 @@ else
 obj-y += hw/$(TARGET_BASE_ARCH)/
 endif
 
-GENERATED_HEADERS += hmp-commands.h qmp-commands-old.h
+GENERATED_HEADERS += hmp-commands.h hmp-commands-info.h qmp-commands-old.h
 
 endif # CONFIG_SOFTMMU
 
@@ -145,24 +164,39 @@ endif # CONFIG_SOFTMMU
 dummy := $(call unnest-vars,,obj-y)
 all-obj-y := $(obj-y)
 
+target-obj-y :=
 block-obj-y :=
 common-obj-y :=
 include $(SRC_PATH)/Makefile.objs
+dummy := $(call unnest-vars,,target-obj-y)
+target-obj-y-save := $(target-obj-y)
 dummy := $(call unnest-vars,.., \
                block-obj-y \
                block-obj-m \
+               crypto-obj-y \
+               crypto-aes-obj-y \
+               qom-obj-y \
+               io-obj-y \
                common-obj-y \
                common-obj-m)
+target-obj-y := $(target-obj-y-save)
 all-obj-y += $(common-obj-y)
+all-obj-y += $(target-obj-y)
+all-obj-y += $(qom-obj-y)
 all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y)
+all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
+all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
+all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
 
-ifndef CONFIG_HAIKU
-LIBS+=-lm
-endif
+$(QEMU_PROG_BUILD): config-devices.mak
 
 # build either PROG or PROGW
 $(QEMU_PROG_BUILD): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
-       $(call LINK,$^)
+       $(call LINK, $(filter-out %.mak, $^))
+ifdef CONFIG_DARWIN
+       $(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"  REZ   $(TARGET_DIR)$@")
+       $(call quiet-command,SetFile -a C $@,"  SETFILE $(TARGET_DIR)$@")
+endif
 
 gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
        $(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES),"  GEN   $(TARGET_DIR)$@")
@@ -170,6 +204,9 @@ gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
 hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
        $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")
 
+hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx
+       $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")
+
 qmp-commands-old.h: $(SRC_PATH)/qmp-commands.hx
        $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")
 
@@ -183,14 +220,12 @@ endif
 
 install: all
 ifneq ($(PROGS),)
-       $(INSTALL_PROG) $(PROGS) "$(DESTDIR)$(bindir)"
-ifneq ($(STRIP),)
-       $(STRIP) $(PROGS:%="$(DESTDIR)$(bindir)/%")
-endif
+       $(call install-prog,$(PROGS),$(DESTDIR)$(bindir))
 endif
 ifdef CONFIG_TRACE_SYSTEMTAP
        $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
        $(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
+       $(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
 endif
 
 GENERATED_HEADERS += config-target.h