#include "gicv3_internal.h"
#include "cpu.h"
+void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s)
+{
+ ARMCPU *arm_cpu = ARM_CPU(cpu);
+ CPUARMState *env = &arm_cpu->env;
+
+ env->gicv3state = (void *)s;
+};
+
static GICv3CPUState *icc_cs_from_env(CPUARMState *env)
{
- /* Given the CPU, find the right GICv3CPUState struct.
- * Since we registered the CPU interface with the EL change hook as
- * the opaque pointer, we can just directly get from the CPU to it.
- */
- return arm_get_el_change_hook_opaque(arm_env_get_cpu(env));
+ return env->gicv3state;
}
static bool gicv3_use_ns_bank(CPUARMState *env)
{
/* Return a mask word which clears the subpriority bits from
* a priority value for a virtual interrupt in the specified group.
- * This depends on the VBPR value:
+ * This depends on the VBPR value.
+ * If using VBPR0 then:
* a BPR of 0 means the group priority bits are [7:1];
* a BPR of 1 means they are [7:2], and so on down to
* a BPR of 7 meaning no group priority bits at all.
+ * If using VBPR1 then:
+ * a BPR of 0 is impossible (the minimum value is 1)
+ * a BPR of 1 means the group priority bits are [7:1];
+ * a BPR of 2 means they are [7:2], and so on down to
+ * a BPR of 7 meaning the group priority is [7].
+ *
* Which BPR to use depends on the group of the interrupt and
* the current ICH_VMCR_EL2.VCBPR settings.
+ *
+ * This corresponds to the VGroupBits() pseudocode.
*/
+ int bpr;
+
if (group == GICV3_G1NS && cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) {
group = GICV3_G0;
}
- return ~0U << (read_vbpr(cs, group) + 1);
+ bpr = read_vbpr(cs, group);
+ if (group == GICV3_G1NS) {
+ assert(bpr > 0);
+ bpr--;
+ }
+
+ return ~0U << (bpr + 1);
}
static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
- int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS;
+ int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
uint64_t value = cs->ich_apr[grp][regno];
trace_gicv3_icv_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
- int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS;
+ int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
{
/* Return a mask word which clears the subpriority bits from
* a priority value for an interrupt in the specified group.
- * This depends on the BPR value:
+ * This depends on the BPR value. For CBPR0 (S or NS):
* a BPR of 0 means the group priority bits are [7:1];
* a BPR of 1 means they are [7:2], and so on down to
* a BPR of 7 meaning no group priority bits at all.
+ * For CBPR1 NS:
+ * a BPR of 0 is impossible (the minimum value is 1)
+ * a BPR of 1 means the group priority bits are [7:1];
+ * a BPR of 2 means they are [7:2], and so on down to
+ * a BPR of 7 meaning the group priority is [7].
+ *
* Which BPR to use depends on the group of the interrupt and
* the current ICC_CTLR.CBPR settings.
+ *
+ * This corresponds to the GroupBits() pseudocode.
*/
+ int bpr;
+
if ((group == GICV3_G1 && cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR) ||
(group == GICV3_G1NS &&
cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
group = GICV3_G0;
}
- return ~0U << ((cs->icc_bpr[group] & 7) + 1);
+ bpr = cs->icc_bpr[group] & 7;
+
+ if (group == GICV3_G1NS) {
+ assert(bpr > 0);
+ bpr--;
+ }
+
+ return ~0U << (bpr + 1);
}
static bool icc_no_enabled_hppi(GICv3CPUState *cs)
/* NS access and Group 0 is inaccessible to NS: return the
* NS view of the current priority
*/
- if (value & 0x80) {
+ if ((value & 0x80) == 0) {
/* Secure priorities not visible to NS */
value = 0;
} else if (value != 0xff) {
/* Current PMR in the secure range, don't allow NS to change it */
return;
}
- value = (value >> 1) & 0x80;
+ value = (value >> 1) | 0x80;
}
cs->icc_pmr_el1 = value;
gicv3_cpuif_update(cs);
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1;
+ uint64_t minval;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
icv_bpr_write(env, ri, value);
return;
}
+ minval = (grp == GICV3_G1NS) ? GIC_MIN_BPR_NS : GIC_MIN_BPR;
+ if (value < minval) {
+ value = minval;
+ }
+
cs->icc_bpr[grp] = value & 7;
gicv3_cpuif_update(cs);
}
uint64_t value;
int regno = ri->opc2 & 3;
- int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1;
+ int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
return icv_ap_read(env, ri);
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
- int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1;
+ int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
icv_ap_write(env, ri, value);
if (arm_feature(env, ARM_FEATURE_EL3) &&
!arm_is_secure(env) && (env->cp15.scr_el3 & SCR_FIQ)) {
/* NS GIC access and Group 0 is inaccessible to NS */
- if (prio & 0x80) {
+ if ((prio & 0x80) == 0) {
/* NS mustn't see priorities in the Secure half of the range */
prio = 0;
} else if (prio != 0xff) {
cs->icc_pmr_el1 = 0;
cs->icc_bpr[GICV3_G0] = GIC_MIN_BPR;
cs->icc_bpr[GICV3_G1] = GIC_MIN_BPR;
- if (arm_feature(env, ARM_FEATURE_EL3)) {
- cs->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR_NS;
- } else {
- cs->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR;
- }
+ cs->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR_NS;
memset(cs->icc_apr, 0, sizeof(cs->icc_apr));
memset(cs->icc_igrpen, 0, sizeof(cs->icc_igrpen));
cs->icc_ctlr_el3 = ICC_CTLR_EL3_NDS | ICC_CTLR_EL3_A3V |
cs->ich_hcr_el2 = 0;
memset(cs->ich_lr_el2, 0, sizeof(cs->ich_lr_el2));
cs->ich_vmcr_el2 = ICH_VMCR_EL2_VFIQEN |
- (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR1_SHIFT) |
+ ((icv_min_vbpr(cs) + 1) << ICH_VMCR_EL2_VBPR1_SHIFT) |
(icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR0_SHIFT);
}
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
- int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS;
+ int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
uint64_t value;
value = cs->ich_apr[grp][regno];
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
- int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS;
+ int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
* it might be with code translated by CPU 0 but run by CPU 1, in
* which case we'd get the wrong value.
* So instead we define the regs with no ri->opaque info, and
- * get back to the GICv3CPUState from the ARMCPU by reading back
- * the opaque pointer from the el_change_hook, which we're going
- * to need to register anyway.
+ * get back to the GICv3CPUState from the CPUARMState.
*/
define_arm_cp_regs(cpu, gicv3_cpuif_reginfo);
if (arm_feature(&cpu->env, ARM_FEATURE_EL2)
projects / qemu.git / blobdiff